arXiv subjects

Michael Fitzgerald

Publications and source records attributed to Michael Fitzgerald.

At least 19 recordsLinked to original sources

arXiv2026

Pre-shipment optical characterization of the SCALES instrument

The Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument is a 1-5 micron imager and 2-5 micron integral field spectrograph, currently being commissioned on the Keck II Telescope. SCALES is optimized for exoplanet high-contrast imaging and spectroscopic characterization, and will be sensitive to older, colder exoplanets than existing instrumentation. The 12.3" x 12.3" imaging channel is designed to replicate the capabilities of NIRC2, and the low (R~35-200, 2.2" x 2.2" FOV) and medium (R~2500-5000, 0.36" x 0.34" FOV) spectral resolution modes offer new capabilities compared to existing Keck instrumentation. We present preliminary optical performance results from laboratory testing and commissioning of SCALES.

astro-ph.IM↗

arXiv2026

High-contrast aperture masking interferometry: detecting companions within the diffraction limit

The pursuit of the direct discovery and characterization of Earth-like exoplanets has motivated high contrast imaging surveys using coronagraphs with narrow inner working angles. Traditional imaging methods, however, are limited by the size of the on-axis PSF and typically only detect companions at angular separations of > 2$\lambda$/D. Meanwhile, non-redundant masking (NRM) techniques have been used with single-aperture telescopes to interferometrically resolve astrophysical features at angular scales within the diffraction limit, but NRM interferometry faces sensitivity issues for high-contrast objects. In this project, we investigate utilizing high contrast coronagraphy in conjunction with NRM interferometry. We conduct a preliminary investigation of this combined architecture with the goal of determining the potential bounds of performance and discovery space for high-contrast targets within the inner working angle of traditional high-contrast imaging. We predict an improvement in the achievable contrast for photon-limited observations by combining the techniques, and we also develop estimates for wavefront stability requirements for the system.

astro-ph.IM↗

arXiv2026

FIRST-PL: Commissioning the first visible photonic lantern spectrograph for sub-diffraction-limit astronomy on Subaru/SCExAO

FIRST-PL (Fibered Imager foR a Single Telescope - Photonic Lantern) is a newly commissioned visible-light instrument on Subaru/SCExAO achieving spectroscopy below the diffraction limit. The instrument uses a Photonic Lantern (PL)-converting multimode fiber into 19 single-mode outputs-feeding a mid-resolution spectrograph (R 3000, 630-790 nm). On-sky performance demonstrates 40% injection efficiency at 680 nm (Strehl 30%) and 12x throughput improvement over single-mode fibers. Three operational modes enable spectro-astrometry (50 microarcseconds precision demonstrated on beta-CMi), image reconstruction, and high-contrast imaging. FIRST-PL represents a significant advancement in high-throughput photonic instrumentation.

astro-ph.IM↗

arXiv2026

Technologies and novel components for broadband splitting and coupling in pairwise and nulling interferometry

Passive and active photonic components are central to the continued development of astronomical photonic integrated circuits (PICs), although achieving broadband achromatic performance remains a significant challenge. This work presents broadband evanescent tri-couplers, tapered directional couplers, and a chromatically controlled achromatic intensity modulator for astronomical interferometry in the J- and H-bands. Silicon nitride and silicon oxide provide complementary low-loss platforms, while customised tapered components enable broadband operation across the 0.95-1.8 microns range. For the silicon nitride platform developed by STMicroelectronics, tapered tri-couplers and directional couplers were designed as replacements for conventional components in a pairwise beam combiner for the PLANETS project. Optimised tapered tri-couplers achieve less than 1% excess loss across the J-band, while tapered directional couplers provide broadband 40:60 splitting suitable for beam combination. For the silicon oxide platform from Enablence, a two-dimensional tapered tri-coupler was investigated for nulling interferometry. The device provides broadband starlight suppression while limiting exoplanet throughput loss to less than 2.2% across the H-band and simultaneously retaining broadband phase-sensing capability for fringe tracking. The chromatically controlled achromatic intensity modulator is introduced as a combination of a tapered directional coupler with a thermo-optic phase shifter, the device provides programmable broadband intensity control for applications including null-depth balancing in interferometric PICs. Future work will extend these concepts to lithographically fabricated chalcogenide glass platforms operating in the mid-infrared, enabling compact photonic beam combiners for future ground- and space-based nulling interferometers targeting Earth-like exoplanets.

astro-ph.IM↗

arXiv2026

Combining spectroscopy and wavefront control at deep contrast with photonic lanterns

HWO aims to directly image objects orbiting Sun-like stars, using a 6-m telescope capable of high-contrast imaging ($10^{-10}$) and spectroscopy to search for biosignatures in planets located in the habitable zone. Recent laboratory demonstrations and ground-based telescope projects have shown the effectiveness of SMFs in spectroscopy, paving the way for SMF-fed spectrographs in future space missions like HWO. SMFs enhance spectral stability and reduce modal noise. HWO spectroscopy will need extended integration times, potentially lasting weeks. During these observations, the wavefront must be precisely measured and maintained to achieve the deep contrast and robust calibration of starlight contamination necessary for exoplanet characterization. We show that photonic lanterns (PLs) are ideally suited to meet these requirements. PLs are compact devices that couple light over a broader angular range than SMFs, ensuring higher throughput, converting a multimode input into multiple single-mode outputs. Positioned at the focal plane, they measure the complex amplitude of the coherent starlight within $\sim$ 2 l/D of the planet image, acting as compact wavefront sensors. Among the different variants of PLs that have emerged, the Hybrid-Mode Selective Photonic Lantern (HMSPL) is particularly attractive, as it directs object light into a central SMF feeding a mid-R spectrograph for exoplanet spectroscopy, while the adjacent SMFs route surrounding speckle light to a low-R spectrograph for rapid wavefront sensing. This dual function eliminates non-common path aberrations, optimizing injection efficiency and background suppression. We introduce HMSPL's dual role and planned tests at UTSA's high-contrast imaging lab and at SCExAO at the Subaru Telescope.

astro-ph.IM↗

arXiv2025

A second planetesimal collision in the Fomalhaut system

The nearby star Fomalhaut is orbited by a compact source, Fomalhaut b, which has previously been interpreted as either a dust-enshrouded exoplanet or a dust cloud generated by the collision of two planetesimals. Such collisions are rarely observed but their debris can appear in direct imaging. We report Hubble Space Telescope observations that show the appearance in 2023 of a second point source around Fomalhaut, resembling the appearance of Fomalhaut b twenty years earlier. We interpret this additional source as a dust cloud produced by a recent impact between two planetesimals. The positions and motion of two impact-generated dust clouds over twenty years provide constraints on the collisional dynamics in the debris belt.

astro-ph.EP↗

arXiv2025

Chemical and Isotopic Homogeneity Between the L Dwarf CD-35 2722 B and its Early M Host Star

CD-35 2722 B is an L dwarf companion to the nearby, $\sim 50-200$ Myr old M1 dwarf CD-35 2722 A. We present a detailed analysis of both objects using high-resolution ($R \sim 35,000$) $K$ band spectroscopy from the Keck Planet Imager and Characterizer (KPIC) combined with archival photometry. With a mass of $30^{+5}_{-4} M_{\mathrm{Jup}}$ (planet-to-host mass ratio 0.05) and projected separation of $67\pm4$ AU from its host, CD-35 2722 B likely formed via gravitational instability. We explore whether the chemical composition of the system tells a similar story. Accounting for systematic uncertainties, we find $\mathrm{[M/H]}=-0.16^{+0.03}_{-0.02} \mathrm{(stat)} \pm 0.25 \mathrm{(sys)}$ dex and $^{12}\mathrm{C}/^{13}\mathrm{C}=132^{+20}_{-14}$ for the host, and $\mathrm{[M/H]}=0.27^{+0.07}_{-0.06} (\mathrm{stat}) \pm 0.12 (\mathrm{sys})$ dex, $^{12}\mathrm{CO}/^{13}\mathrm{CO}=159^{+33}_{-24} \mathrm{(stat)}^{+40}_{-33} \mathrm{(sys)}$, and $\mathrm{C/O} = 0.55 \pm 0.01 (\mathrm{stat}) \pm 0.04 (\mathrm{sys})$ for the companion. The chemical compositions for the brown dwarf and host star agree within the $1.5\sigma$ level, supporting a scenario where CD-35 2722 B formed via gravitational instability. We do not find evidence for clouds on CD-35 2722 B despite it being a photometrically red mid-L dwarf and thus expected to be quite cloudy. We retrieve a temperature structure which is more isothermal than models and investigate its impact on our measurements, finding that constraining the temperature structure to self-consistent models does not significantly impact our retrieved chemical properties. Our observations highlight the need for data from complementary wavelength ranges to verify the presence of aerosols in likely cloudy L dwarfs.

astro-ph.EP↗

arXiv2025

Dangerous Questions in Astronomy Education

As astronomy enters an era defined by global telescope networks, petabyte-scale surveys, and powerful computational tools, the longstanding goals of astronomy education, particularly introductory ``ASTRO101'', but equally encompassing both higher and lower level courses, warrant fresh examination. In June 2024, the AstroEdUNC meeting at UNC--Chapel Hill convened 100 astronomers, education researchers, and practitioners to synthesise community perspectives on the purpose, content, and delivery of astronomy education. Beginning with historical vignettes, the meeting's deliberations were organised into six interrelated themes: (1) Context, highlighting astronomy's evolution from classical charting to multi-messenger discovery and its role as a connective thread across STEM and the humanities; (2) Content, exploring how curricula can balance essential concepts with authentic investigations and leverage open-source and AI-augmented resources; (3) Skills, arguing that astronomy should foreground scientific literacy, computational fluency, and communication through genuine data-driven inquiry; (4) Engagement, advocating for active-learning strategies, formative assessment, and culturally inclusive narratives; (5) Beyond the Classroom, emphasising scaffolding, universal-design practices, and K--12/community partnerships; and (6) Astronomy Education Research, outlining priority areas for assessing knowledge, attitudes, and long-term outcomes. We provide concrete recommendations for future astronomy education research development, underscoring the need for approaches to education that are authentic while meeting the learning and life goal needs of the students, a vibrant community of practice and robust researcher-practitioner partnerships to ensure that introductory astronomy is pertinent, applicable and inspiring to a broad student population.

physics.ed-ph↗

arXiv2025

The Simultaneous Operation of a Controllable Segmented Primary Mirror and Single Conjugate Adaptive Optics System part 1 -- Design Concept and Sensitivity Analysis

The maintenance of primary mirror segment co-phasing is a critical aspect to the operation of segmented telescopes. However, speckle-based measurements of the phasing of the Keck primary have estimated semi-static surface aberrations of approximately 65 nm rms, which were not sensed by the current phasing control system. We propose directly sensing and controlling the primary via the adaptive optics (AO) system, as a Controllable Segmented Primary (CSP), to actively correct its phasing. We develop a methodology for separating the independent controllable signal of the CSP from the rest of the AO system and show estimations of the achievable measurement precision from models of the Keck-II AO system.

astro-ph.IM↗

arXiv2025

The Simultaneous Operation of a Controllable Segmented Primary Mirror and Single Conjugate Adaptive Optics System part 2 -- Simulated Operation

There are scientific and technological needs to improve the co-phasing of the primary mirrors of segmented telescopes. We have developed a methodology for using the wavefront sensor of an adaptive optics (AO) system to disentangle the phase of a Controllable Segmented Primary mirror (CSP) from the residual phase aberrations to be corrected by the rest of the AO system. We show simulations of the Keck-II AO system where we simultaneously control the CSP surface and a single-conjugate AO system using a pyramid wavefront sensor in a low-bandwidth closed loop, resulting in significantly decreased aberrations on the primary and improvements in the performance of the AO system. Analysis of on-sky telemetry data from the Keck-II AO system validates these simulations and shows that accurate measurements of the primary phase can be made in the presence of real atmospheric turbulence. Ultimately, this work suggests that it is feasible to simultaneously monitor and control the CSP with an AO wavefront sensor while in closed-loop operation and that doing so may significantly improve the performance of the AO system.

astro-ph.IM↗

arXiv2024

Spectroscopy using a visible photonic lantern at the Subaru telescope: Laboratory characterization and first on-sky demonstration on Ikiiki ({\alpha} Leo) and `Aua ({\alpha} Ori)

Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional

astro-ph.IM↗

arXiv2024

Subaru/CHARIS High-Resolution Mode Spectroscopy of the Brown Dwarf Companion HD 33632 Ab

Brown dwarfs (BD) are model degenerate in age and mass. High-contrast imaging and spectroscopy of BD companions to host stars where the mass and age can be independently constrained by dynamics and stellar age indicators respectively provide valuable tests of BD evolution models. In this paper, we present a new epoch of Subaru/CHARIS H- and K-band observations of one such previously discovered system, HD 33632 Ab. We reanalyze the mass and orbit using our new epoch of extracted relative astrometry, and fit extracted spectra to the newest generation of equilibrium, disequilibrium, and cloudy spectral and evolution models for BDs. No spectral model perfectly agrees with evolutionary tracks and the derived mass and age, instead favoring a somewhat younger BD than the host star's inferred age. This tension can potentially be resolved using atmosphere and evolution models that consider both clouds and disequilibrium chemistry simultaneously, or by additional future spectra at higher resolution or in other band passes. Photometric measurements alone remain consistent with the luminosity predicted by evolutionary tracks. Our work highlights the importance of considering complexities like clouds, disequilibrium chemistry, and composition when comparing spectral models to evolutionary tracks.

astro-ph.EP↗

arXiv2023

Calibration Unit Design for High-Resolution Infrared Spectrograph for Exoplanet Characterization (HISPEC)

The latest generation of high-resolution spectrograph instruments on 10m-class telescopes continue to pursue challenging science cases. Consequently, ever more precise calibration methods are necessary to enable trail-blazing science methodology. We present the High-resolution Infrared SPectrograph for Exoplanet Characterization (HISPEC) Calibration Unit (CAL), designed to facilitate challenging science cases such as Doppler imaging of exoplanet atmospheres, precision radial velocity, and high-contrast high-resolution spectroscopy of nearby exoplanets. CAL builds upon the heritage from the pathfinder instrument Keck Planet Imager and Characterizer (KPIC) and utilizes four near-infrared (NIR) light sources encoded with wavelength information that are coupled into single-mode fibers. They can be used synchronously during science observations or asynchronously during daytime calibrations. A hollow cathode lamp (HCL) and a series of gas absorption cells provide absolute calibration from 0.98 {\mu}m to 2.5 {\mu}m. A laser frequency comb (LFC) provides stable, time-independent wavelength information during observation and CAL implements a lower finesse astro-etalon as a backup for the LFC. Design lessons from instrumentation like HISPEC will serve to inform the requirements for similar instruments for the ELTs in the future.

astro-ph.IM↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2023

Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets

FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.

astro-ph.IM↗

arXiv2023

On-sky speckle nulling through a single-mode fiber with the Keck Planet Imager and Characterizer

The Keck Planet Imager and Characterizer (KPIC) is an instrument at the Keck II telescope that enables high-resolution spectroscopy of directly imaged exoplanets and substellar companions. KPIC uses single-mode fibers to couple the adaptive optics system to Keck's near-infrared spectrometer (NIRSPEC). However, KPIC's sensitivity at small separations is limited by the leakage of stellar light into the fiber. Speckle nulling uses a deformable mirror to destructively interfere starlight with itself, a technique typically used to reduce stellar signal on a focal-plane imaging detector. We present the first on-sky demonstration of speckle nulling through an optical fiber with KPIC, using NIRSPEC to collect exposures that measure speckle phase for quasi-real-time wavefront control while also serving as science data. We repeat iterations of measurement and correction, each using at least 5 exposures. We show a decrease in the on-sky leaked starlight by a factor of 2.6 to 2.8 in the targeted spectral order, at a spatial separation of 2.0 {\lambda}/D in K-band. This corresponds to an estimated factor of 2.6 to 2.8 decrease in the required exposure time to reach a given SNR, relative to conventional KPIC observations. The performance of speckle nulling is limited by instability in the speckle phase: when the loop is opened, the null-depth degrades by a factor of 2 on the timescale of a single phase measurement, which would limit the suppression that can be achieved. Future work includes exploring gradient-descent methods, which may be faster and thereby able to achieve deeper nulls. In the meantime, the speckle nulling algorithm demonstrated in this work can be used to decrease stellar leakage and improve the signal-to-noise of science observations.

astro-ph.IM↗

arXiv2022

Focal-plane wavefront sensing with photonic lanterns I: theoretical framework

The photonic lantern (PL) is a tapered waveguide that can efficiently couple light into multiple single-mode optical fibers. Such devices are currently being considered for a number of tasks, including the coupling of telescopes and high-resolution, fiber-fed spectrometers, coherent detection, nulling interferometry, and vortex-fiber nulling (VFN). In conjunction with these use cases, PLs can simultaneously perform low-order focal-plane wavefront sensing. In this work, we provide a mathematical framework for the analysis of the photonic lantern wavefront sensor (PLWFS), deriving linear and higher-order reconstruction models as well as metrics through which sensing performance -- both in the linear and nonlinear regimes -- can be quantified. This framework can be extended to account for additional optics such as beam-shaping optics and vortex masks, and is generalizable to other wavefront sensing architectures. Lastly, we provide initial numerical verification of our mathematical models, by simulating a 6-port PLWFS. In a companion paper, we provide a more comprehensive numerical characterization of few-port PLWFSs, and consider how the sensing properties of these devices can be controlled and optimized.

astro-ph.IM↗

arXiv2022

Liger at Keck Observatory: Design of Imager Optical Assembly and Spectrograph Re-Imaging Optics

Liger is an adaptive optics (AO) fed imager and integral field spectrograph (IFS) designed to take advantage of the Keck All-sky Precision Adaptive-optics (KAPA) upgrade for the W.M. Keck Observatory. We present the design and analysis of the imager optical assembly including the spectrograph Re-Imaging Optics (RIO) which transfers the beam path from the imager focal plane to the IFS slicer module and lenslet array. Each imager component and the first two RIO mechanisms are assembled and individually aligned on the same optical plate. Baffling suppresses background radiation and scattered light, and a pupil viewing camera allows the imager detector to focus on an image of the telescope pupil. The optical plate mounts on an adapter frame for alignment of the overall system. The imager and RIO will be characterized in a cryogenic test chamber before installation in the final science cryostat.

astro-ph.IM↗