arXiv subjects

Michele Zorzi

Publications and source records attributed to Michele Zorzi.

At least 163 records · Page 9Linked to original sources

arXiv2018

Coverage and Connectivity Analysis of Millimeter Wave Vehicular Networks

The next generations of vehicles will require data transmission rates in the order of terabytes per driving hour, to support advanced automotive services. This unprecedented amount of data to be exchanged goes beyond the capabilities of existing communication technologies for vehicular communication and calls for new solutions. A possible answer to this growing demand for ultra-high transmission speeds can be found in the millimeter-wave (mmWave) bands which, however, are subject to high signal attenuation and challenging propagation characteristics. In particular, mmWave links are typically directional, to benefit from the resulting beamforming gain, and require precise alignment of the transmitter and the receiver beams, an operation which may increase the latency of the communication and lead to deafness due to beam misalignment. In this paper, we propose a stochastic model for characterizing the beam coverage and connectivity probability in mmWave automotive networks. The purpose is to exemplify some of the complex and interesting tradeoffs that have to be considered when designing solutions for vehicular scenarios based on mmWave links. The results show that the performance of the automotive nodes in highly mobile mmWave systems strictly depends on the specific environment in which the vehicles are deployed, and must account for several automotive-specific features such as the nodes speed, the beam alignment periodicity, the base stations density and the antenna geometry.

cs.NI↗

arXiv2018

Integration of Carrier Aggregation and Dual Connectivity for the ns-3 mmWave Module

Thanks to the wide availability of bandwidth, the millimeter wave (mmWave) frequencies will provide very high data rates to mobile users in next generation 5G cellular networks. However, mmWave links suffer from high isotropic pathloss and blockage from common materials, and are subject to an intermittent channel quality. Therefore, protocols and solutions at different layers in the cellular network and the TCP/IP protocol stack have been proposed and studied. A valuable tool for the end-to-end performance analysis of mmWave cellular networks is the ns-3 mmWave module, which already models in detail the channel, Physical (PHY) and Medium Access Control (MAC) layers, and extends the Long Term Evolution (LTE) stack for the higher layers. In this paper we present an implementation for the ns-3 mmWave module of multi connectivity techniques for 3GPP New Radio (NR) at mmWave frequencies, namely Carrier Aggregation (CA) and Dual Connectivity (DC), and discuss how they can be integrated to increase the functionalities offered by the ns-3 mmWave module.

cs.NI↗

arXiv2018

Resource Allocation in Heterogenous Full-duplex OFDMA Networks: Design and Analysis

Recent studies indicate the feasibility of full-duplex (FD) bidirectional wireless communications. Due to its potential to increase the capacity, analyzing the performance of a cellular network that contains full-duplex devices is crucial. In this paper, we consider maximizing the weighted sum-rate of downlink and uplink of an FD heterogeneous OFDMA network where each cell consists of an imperfect FD base-station (BS) and a mixture of half-duplex and imperfect full-duplex mobile users. To this end, first, the joint problem of sub-channel assignment and power allocation for a single cell network is investigated. Then, the proposed algorithms are extended for solving the optimization problem for an FD heterogeneous network in which intra-cell and inter-cell interferences are taken into account. Simulation results demonstrate that in a single cell network, when all the users and the BSs are perfect FD nodes, the network throughput could be doubled. Otherwise, the performance improvement is limited by the inter-cell interference, inter-node interference, and self-interference. We also investigate the effect of the percentage of FD users on the network performance in both indoor and outdoor scenarios, and analyze the effect of the self-interference cancellation capability of the FD nodes on the network performance.

cs.NI↗

arXiv2018

Study of Realistic Antenna Patterns in 5G mmWave Cellular Scenarios

Large antenna arrays and millimeter-wave (mmWave) frequencies have been attracting growing attention as possible candidates to meet the high requirements of future 5G mobile networks. In view of the large path loss attenuation in these bands, beamforming techniques that create a beam in the direction of the user equipment are essential to perform the transmission. For this purpose, in this paper, we aim at characterizing realistic antenna radiation patterns, motivated by the need to properly capture mmWave propagation behaviors and understand the achievable performance in 5G cellular scenarios. In particular, we highlight how the performance changes with the radiation pattern used. Consequently, we conclude that it is crucial to use an accurate and realistic radiation model for proper performance assessment and system dimensioning.

cs.NI↗

arXiv2018

End-to-End Simulation of 5G mmWave Networks

Due to its potential for multi-gigabit and low latency wireless links, millimeter wave (mmWave) technology is expected to play a central role in 5th generation cellular systems. While there has been considerable progress in understanding the mmWave physical layer, innovations will be required at all layers of the protocol stack, in both the access and the core network. Discrete-event network simulation is essential for end-to-end, cross-layer research and development. This paper provides a tutorial on a recently developed full-stack mmWave module integrated into the widely used open-source ns--3 simulator. The module includes a number of detailed statistical channel models as well as the ability to incorporate real measurements or ray-tracing data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and highly customizable, making it easy to integrate algorithms or compare Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example. The module is interfaced with the core network of the ns--3 Long Term Evolution (LTE) module for full-stack simulations of end-to-end connectivity, and advanced architectural features, such as dual-connectivity, are also available. To facilitate the understanding of the module, and verify its correct functioning, we provide several examples that show the performance of the custom mmWave stack as well as custom congestion control algorithms designed specifically for efficient utilization of the mmWave channel.

cs.NI↗

arXiv2018

Reliable Video Streaming over mmWave with Multi Connectivity and Network Coding

The next generation of multimedia applications will require the telecommunication networks to support a higher bitrate than today, in order to deliver virtual reality and ultra-high quality video content to the users. Most of the video content will be accessed from mobile devices, prompting the provision of very high data rates by next generation (5G) cellular networks. A possible enabler in this regard is communication at mmWave frequencies, given the vast amount of available spectrum that can be allocated to mobile users; however, the harsh propagation environment at such high frequencies makes it hard to provide a reliable service. This paper presents a reliable video streaming architecture for mmWave networks, based on multi connectivity and network coding, and evaluates its performance using a novel combination of the ns-3 mmWave module, real video traces and the network coding library Kodo. The results show that it is indeed possible to reliably stream video over cellular mmWave links, while the combination of multi connectivity and network coding can support high video quality with low latency.

cs.NI↗

arXiv2017

milliProxy: a TCP Proxy Architecture for 5G mmWave Cellular Systems

TCP is the most widely used transport protocol in the internet. However, it offers suboptimal performance when operating over high bandwidth mmWave links. The main issues introduced by communications at such high frequencies are (i) the sensitivity to blockage and (ii) the high bandwidth fluctuations due to Line of Sight (LOS) to Non Line of Sight (NLOS) transitions and vice versa. In particular, TCP has an abstract view of the end-to-end connection, which does not properly capture the dynamics of the wireless mmWave link. The consequence is a suboptimal utilization of the available resources. In this paper we propose a TCP proxy architecture that improves the performance of TCP flows without any modification at the remote sender side. The proxy is installed in the Radio Access Network, and exploits information available at the gNB in order to maximize throughput and minimize latency.

cs.NI↗

arXiv2017

Statistical Approaches for Initial Access in mmWave 5G Systems

mmWave communication systems overcome high attenuation by using multiple antennas at both the transmitter and the receiver to perform beamforming. Upon entrance of a user equipment (UE) into a cell a scanning procedure must be performed by the base station in order to find the UE, in what is known as initial access (IA) procedure. In this paper we start from the observation that UEs are more likely to enter from some directions than from others, as they typically move along streets, while other movements are impossible due to the presence of obstacles. Moreover, users are entering with a given time statistics, for example described by inter-arrival times. In this context we propose scanning strategies for IA that take into account the entrance statistics. In particular, we propose two approaches: a memory-less random illumination (MLRI) algorithm and a statistic and memory-based illumination (SMBI) algorithm. The MLRI algorithm scans a random sector in each slot, based on the statistics of sector entrance, without memory. The SMBI algorithm instead scans sectors in a deterministic sequence selected according to the statistics of sector entrance and time of entrance, and taking into account the fact that the user has not yet been discovered (thus including memory). We assess the performance of the proposed methods in terms of average discovery time.

cs.NI↗

arXiv2017

Complex Systems Science meets 5G and IoT

We propose a new paradigm for telecommunications, and develop a framework drawing on concepts from information (i.e., different metrics of complexity) and computational (i.e., agent based modeling) theory, adapted from complex system science. We proceed in a systematic fashion by dividing network complexity understanding and analysis into different layers. Modelling layer forms the foundation of the proposed framework, supporting analysis and tuning layers. The modelling layer aims at capturing the significant attributes of networks and the interactions that shape them, through the application of tools such as agent-based modelling and graph theoretical abstractions, to derive new metrics that holistically describe a network. The analysis phase completes the core functionality of the framework by linking our new metrics to the overall network performance. The tuning layer augments this core with algorithms that aim at automatically guiding networks toward desired conditions. In order to maximize the impact of our ideas, the proposed approach is rooted in relevant, near-future architectures and use cases in 5G networks, i.e., Internet of Things (IoT) and self-organizing cellular networks.

cs.NI↗

arXiv2017

RCFD: A Novel Channel Access Scheme for Full-Duplex Wireless Networks Based on Contention in Time and Frequency Domains

In the last years, the advancements in signal processing and integrated circuits technology allowed several research groups to develop working prototypes of in-band full-duplex wireless systems. The introduction of such a revolutionary concept is promising in terms of increasing network performance, but at the same time poses several new challenges, especially at the MAC layer. Consequently, innovative channel access strategies are needed to exploit the opportunities provided by full-duplex while dealing with the increased complexity derived from its adoption. In this direction, this paper proposes RTS/CTS in the Frequency Domain (RCFD), a MAC layer scheme for full-duplex ad hoc wireless networks, based on the idea of time-frequency channel contention. According to this approach, different OFDM subcarriers are used to coordinate how nodes access the shared medium. The proposed scheme leads to efficient transmission scheduling with the result of avoiding collisions and exploiting full-duplex opportunities. The considerable performance improvements with respect to standard and state-of-the-art MAC protocols for wireless networks are highlighted through both theoretical analysis and network simulations.

cs.NI↗

arXiv2017

Hybrid Spectrum Sharing in mmWave Cellular Networks

While spectrum at millimeter wave (mmWave) frequencies is less scarce than at traditional frequencies below 6 GHz, still it is not unlimited, in particular if we consider the requirements from other services using the same band and the need to license mmWave bands to multiple mobile operators. Therefore, an efficient spectrum access scheme is critical to harvest the maximum benefit from emerging mmWave technologies. In this paper, we introduce a new hybrid spectrum access scheme for mmWave networks, where data is aggregated through two mmWave carriers with different characteristics. In particular, we consider the case of a hybrid spectrum scheme between a mmWave band with exclusive access and a mmWave band where spectrum is pooled between multiple operators. To the best of our knowledge, this is the first study proposing hybrid spectrum access for mmWave networks and providing a quantitative assessment of its benefits. Our results show that this approach provides major advantages with respect to traditional fully licensed or fully unlicensed spectrum access schemes, though further work is needed to achieve a more complete understanding of both technical and non technical implications.

cs.NI↗

arXiv2017

Analysis of Statistical QoS in Half Duplex and Full Duplex Dense Heterogeneous Cellular Networks

Statistical QoS provisioning as an important performance metric in analyzing next generation mobile cellular network, aka 5G, is investigated. In this context, by quantifying the performance in terms of the effective capacity, we introduce a lower bound for the system performance that facilitates an efficient analysis. Based on the proposed lower bound, which is mainly built on a per resource block analysis, we build a basic mathematical framework to analyze effective capacity in an ultra dense heterogeneous cellular network. We use our proposed scalable approach to give insights about the possible enhancements of the statistical QoS experienced by the end users if heterogeneous cellular networks migrate from a conventional half duplex to an imperfect full duplex mode of operation. Numerical results and analysis are provided, where the network is modeled as a Matern point process. The results demonstrate the accuracy and computational efficiency of the proposed scheme, especially in large scale wireless systems. Moreover, the minimum level of self interference cancellation for the full duplex system to start outperforming its half duplex counterpart is investigated.

cs.IT↗

arXiv2017

An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications

The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular systems. However, links in mmWave networks are susceptible to blockage and may suffer from rapid variations in quality. Connectivity to multiple cells - at mmWave and/or traditional frequencies - is considered essential for robust communication. One of the challenges in supporting multi-connectivity in mmWaves is the requirement for the network to track the direction of each link in addition to its power and timing. To address this challenge, we implement a novel uplink measurement system that, with the joint help of a local coordinator operating in the legacy band, guarantees continuous monitoring of the channel propagation conditions and allows for the design of efficient control plane applications, including handover, beam tracking and initial access. We show that an uplink-based multi-connectivity approach enables less consuming, better performing, faster and more stable cell selection and scheduling decisions with respect to a traditional downlink-based standalone scheme. Moreover, we argue that the presented framework guarantees (i) efficient tracking of the user in the presence of the channel dynamics expected at mmWaves, and (ii) fast reaction to situations in which the primary propagation path is blocked or not available.

cs.NI↗

arXiv2017

Improved Handover Through Dual Connectivity in 5G mmWave Mobile Networks

The millimeter wave (mmWave) bands offer the possibility of orders of magnitude greater throughput for fifth generation (5G) cellular systems. However, since mmWave signals are highly susceptible to blockage, channel quality on any one mmWave link can be extremely intermittent. This paper implements a novel dual connectivity protocol that enables mobile user equipment (UE) devices to maintain physical layer connections to 4G and 5G cells simultaneously. A novel uplink control signaling system combined with a local coordinator enables rapid path switching in the event of failures on any one link. This paper provides the first comprehensive end-to-end evaluation of handover mechanisms in mmWave cellular systems. The simulation framework includes detailed measurement-based channel models to realistically capture spatial dynamics of blocking events, as well as the full details of MAC, RLC and transport protocols. Compared to conventional handover mechanisms, the study reveals significant benefits of the proposed method under several metrics.

cs.NI↗

arXiv2017

Minimizing Data Distortion of Periodically Reporting IoT Devices with Energy Harvesting

Energy harvesting is a promising technology for the Internet of Things (IoT) towards the goal of self-sustainability of the involved devices. However, the intermittent and unreliable nature of the harvested energy demands an intelligent management of devices' operation in order to ensure a sustained performance of the IoT application. In this work, we address the problem of maximizing the quality of the reported data under the constraints of energy harvesting, energy consumption and communication channel impairments. Specifically, we propose an energy-aware joint source-channel coding scheme that minimizes the expected data distortion, for realistic models of energy generation and of the energy spent by the device to process the data, when the communication is performed over a Rayleigh fading channel. The performance of the scheme is optimized by means of a Markov Decision Process framework.

cs.IT↗

arXiv2017

Joint Retransmission, Compression and Channel Coding for Data Fidelity under Energy Constraints

We consider a monitoring application where sensors periodically report data to a common receiver in a time division multiplex fashion. The sensors are constrained by the limited and unpredictable energy availability provided by Energy Harvesting (EH), and by the channel impairments. To maximize the quality of the reported data, the packets transmitted contain newly generated data blocks together with up to $r - 1$ previously unsuccessfully delivered ones, where $r$ is a design parameter; such blocks are compressed, concatenated and encoded with a channel code. The scheme applies lossy compression, such that the fidelity of the individual blocks is traded with the reliability provided by the channel code. We show that the proposed strategy outperforms the one in which retransmissions are not allowed. We also investigate the tradeoff between the value of $r$, the compression and coding rates, under the constraints of the energy availability, and, once $r$ has been decided, use a Markov Decision Process (MDP) to optimize the compression/coding rates. Finally, we implement a reinforcement learning algorithm, through which devices can learn the optimal transmission policy without knowing a priori the statistics of the EH process, and show that it indeed reaches the performance obtained via MDP.

cs.IT↗

arXiv2017

Rate-Distortion Classification for Self-Tuning IoT Networks

Many future wireless sensor networks and the Internet of Things are expected to follow a software defined paradigm, where protocol parameters and behaviors will be dynamically tuned as a function of the signal statistics. New protocols will be then injected as a software as certain events occur. For instance, new data compressors could be (re)programmed on-the-fly as the monitored signal type or its statistical properties change. We consider a lossy compression scenario, where the application tolerates some distortion of the gathered signal in return for improved energy efficiency. To reap the full benefits of this paradigm, we discuss an automatic sensor profiling approach where the signal class, and in particular the corresponding rate-distortion curve, is automatically assessed using machine learning tools (namely, support vector machines and neural networks). We show that this curve can be reliably estimated on-the-fly through the computation of a small number (from ten to twenty) of statistical features on time windows of a few hundreds samples.

cs.NI↗

arXiv2017

X-TCP: A Cross Layer Approach for TCP Uplink Flows in mmWave Networks

Millimeter wave frequencies will likely be part of the fifth generation of mobile networks and of the 3GPP New Radio (NR) standard. MmWave communication indeed provides a very large bandwidth, thus an increased cell throughput, but how to exploit these resources at the higher layers is still an open research question. A very relevant issue is the high variability of the channel, caused by the blockage from obstacles and the human body. This affects the design of congestion control mechanisms at the transport layer, and state-of-the-art TCP schemes such as TCP CUBIC present suboptimal performance. In this paper, we present a cross layer approach for uplink flows that adjusts the congestion window of TCP at the mobile equipment side using an estimation of the available data rate at the mmWave physical layer, based on the actual resource allocation and on the Signal to Interference plus Noise Ratio. We show that this approach reduces the latency, avoiding to fill the buffers in the cellular stack, and has a quicker recovery time after RTO events than several other TCP congestion control algorithms.

cs.NI↗