arXiv subjects

Miguel Angel Gonzalez Ballester

Publications and source records attributed to Miguel Angel Gonzalez Ballester.

8 recordsLinked to original sources

arXiv2026

DP-KFC: Data-Free Preconditioning for Privacy-Preserving Deep Learning

Differentially private optimization suffers from a fundamental geometric mismatch: deep networks have highly anisotropic loss landscapes, yet DP-SGD injects isotropic noise. Second-order preconditioning can resolve this, but estimating curvature typically requires private data (consuming privacy budget) or public data (introducing distribution shift). We show that the Fisher Information Matrix decouples into architectural sensitivity, recoverable via synthetic noise, and input correlations, approximable from modality-specific frequency statistics. We propose DP-KFC, which constructs KFAC preconditioners by probing networks with structured synthetic noise, requiring neither private nor public data. Empirically, DP-KFC consistently outperforms DP-SGD and adaptive baselines across diverse modalities in strong privacy regimes ($\varepsilon \leq 3$). DP-KFC matches private-data preconditioners while public-data variants degrade by up to $4.8\%$, showing that curvature can be estimated without consuming privacy budget or introducing distribution shift. This enables privacy-preserving learning in specialized domains (e.g., medical applications) where regulatory constraints make data scarce.

cs.LG↗

arXiv2026

Fetpype: An Open-Source Pipeline for Reproducible Fetal Brain MRI Analysis

Fetal brain magnetic resonance imaging (MRI) is crucial for assessing neurodevelopment in utero. However, fetal MRI analysis remains technically challenging due to fetal motion, low signal-to-noise ratio, and the need for complex multi-step processing pipelines. These pipelines typically include motion correction, super-resolution reconstruction, tissue segmentation, and cortical surface extraction. While specialized tools exist for each individual processing step, integrating them into a robust, reproducible, and user-friendly end-to-end workflow remains difficult. This fragmentation limits reproducibility across studies and hinders the adoption of advanced fetal neuroimaging methods in both research and clinical contexts. Fetpype addresses this gap by providing a standardized, modular, and reproducible framework for fetal brain MRI preprocessing and analysis, enabling researchers to process raw T2-weighted acquisitions through to derived volumetric and surface-based outputs within a unified workflow. Fetpype is publicly available on GitHub at https://github.com/fetpype/fetpype.

eess.IV↗

arXiv2026

Decoder-Free Supervoxel GNN for Accurate Brain-Tumor Localization in Multi-Modal MRI

Modern vision backbones for 3D medical imaging typically process dense voxel grids through parameter-heavy encoder-decoder structures, a design that allocates a significant portion of its parameters to spatial reconstruction rather than feature learning. Our approach introduces SVGFormer, a decoder-free pipeline built upon a content-aware grouping stage that partitions the volume into a semantic graph of supervoxels. Its hierarchical encoder learns rich node representations by combining a patch-level Transformer with a supervoxel-level Graph Attention Network, jointly modeling fine-grained intra-region features and broader inter-regional dependencies. This design concentrates all learnable capacity on feature encoding and provides inherent, dual-scale explainability from the patch to the region level. To validate the framework's flexibility, we trained two specialized models on the BraTS dataset: one for node-level classification and one for tumor proportion regression. Both models achieved strong performance, with the classification model achieving a F1-score of 0.875 and the regression model a MAE of 0.028, confirming the encoder's ability to learn discriminative and localized features. Our results establish that a graph-based, encoder-only paradigm offers an accurate and inherently interpretable alternative for 3D medical image representation.

cs.CV↗

arXiv2024

Data Repository of Finite Element Models of Normal and Deformed Thoracolumbar Spine

Adult spine deformity (ASD) is prevalent and leads to a sagittal misalignment in the vertebral column. Computational methods, including Finite Element (FE) Models, have emerged as valuable tools for investigating the causes and treatment of ASD through biomechanical simulations. However, the process of generating personalized FE models is often complex and time-consuming. To address this challenge, we present a repository of FE models with diverse spine morphologies that statistically represent real geometries from a cohort of patients. These models are generated using EOS images, which are utilized to reconstruct 3D surface spine models. Subsequently, a Statistical Shape Model (SSM) is constructed, enabling the adaptation of a FE hexahedral mesh template for both the bone and soft tissues of the spine through mesh morphing. The SSM deformation fields facilitate the personalization of the mean hexahedral FE model based on sagittal balance measurements. Ultimately, this new hexahedral SSM tool offers a means to generate a virtual cohort of 16807 thoracolumbar FE spine models, which are openly shared in a public repository.

physics.bio-ph↗

arXiv2024

Hardware Density Reduction To Avoid Proximal Junction Failure In Adult Spine Surgery: In Silico Case Studies and Virtual Cohort

Background: Proximal Junctional Failure (PJF) is a post-operative complication in adult spine surgery, often requiring reoperation. Osteotomy is often used in revision surgeries, leading to 34.8% complications. Hence, suboptimal decisions might be extending hardware without osteotomy, which yields to severe Global Alignment and Proportion (GAP) scores. High GAPs increase PJF risk, but Hardware Density Reduction (HDR) might limit it. Methods: Two clinical cases were evaluated: 1) Initially operated with hardware extended to T10, GAP 10; 2) PJF at T11 and hardware extended to T3, GAP 11. Two patient-personalized spine FE models were constructed through Statistical Shape Modelling (SSM) and mesh morphing. Intervertebral Disk (IVD) fiber strain, screw pull-out force, and rod stress were evaluated for the cases 1) and 2), also for 91 virtual HDR scenarios with different GAP scores, using Finite Element (FE) simulations. Different rod and bone material properties were also assessed. Results: HDR could decrease IVD fiber strain (-70% at most) and increase screw pull-out forces (+142% at most) for cases with Ti rod and normal bone. Cr-Co rod and osteopenia, and osteoporotic bones had high PJF risk. Trade-off analyses could determine the best configurations avoiding PJF. Virtual cohort study showed that GAP 12 and 13 could not avoid PJF in any HDR scenarios either with Ti or Cr-Co rods. HDR in a UIV T10 virtual patient with GAP 11 could not de-risk in case of Cr-Co rods. UIV T3 with GAP 13 could not benefit any HDR strategy, independently of rod properties. In contrast, Ti rods might allow HDR to de-risk GAP 12 patients with UIV T3. Conclusions: HDR could avoid PJF in the patients with medium high GAP scores, depending on the screw reduction pattern, and bone and rod material properties. Remarkably, HDR technique might avoid excessive spine surgeries and minimize the surgery cost.

physics.med-ph↗

arXiv2022

Attri-VAE: attribute-based interpretable representations of medical images with variational autoencoders

Deep learning (DL) methods where interpretability is intrinsically considered as part of the model are required to better understand the relationship of clinical and imaging-based attributes with DL outcomes, thus facilitating their use in the reasoning behind medical decisions. Latent space representations built with variational autoencoders (VAE) do not ensure individual control of data attributes. Attribute-based methods enforcing attribute disentanglement have been proposed in the literature for classical computer vision tasks in benchmark data. In this paper, we propose a VAE approach, the Attri-VAE, that includes an attribute regularization term to associate clinical and medical imaging attributes with different regularized dimensions in the generated latent space, enabling a better-disentangled interpretation of the attributes. Furthermore, the generated attention maps explained the attribute encoding in the regularized latent space dimensions. Using the Attri-VAE approach we analyzed healthy and myocardial infarction patients with clinical, cardiac morphology, and radiomics attributes. The proposed model provided an excellent trade-off between reconstruction fidelity, disentanglement, and interpretability, outperforming state-of-the-art VAE approaches according to several quantitative metrics. The resulting latent space allowed the generation of realistic synthetic data in the trajectory between two distinct input samples or along a specific attribute dimension to better interpret changes between different cardiac conditions.

eess.IV↗

arXiv2020

A radiomics approach to analyze cardiac alterations in hypertension

Hypertension is a medical condition that is well-established as a risk factor for many major diseases. For example, it can cause alterations in the cardiac structure and function over time that can lead to heart related morbidity and mortality. However, at the subclinical stage, these changes are subtle and cannot be easily captured using conventional cardiovascular indices calculated from clinical cardiac imaging. In this paper, we describe a radiomics approach for identifying intermediate imaging phenotypes associated with hypertension. The method combines feature selection and machine learning techniques to identify the most subtle as well as complex structural and tissue changes in hypertensive subgroups as compared to healthy individuals. Validation based on a sample of asymptomatic hearts that include both hypertensive and non-hypertensive cases demonstrate that the proposed radiomics model is capable of detecting intensity and textural changes well beyond the capabilities of conventional imaging phenotypes, indicating its potential for improved understanding of the longitudinal effects of hypertension on cardiovascular health and disease.

physics.med-ph↗

arXiv2018

Computational Anatomy for Multi-Organ Analysis in Medical Imaging: A Review

The medical image analysis field has traditionally been focused on the development of organ-, and disease-specific methods. Recently, the interest in the development of more 20 comprehensive computational anatomical models has grown, leading to the creation of multi-organ models. Multi-organ approaches, unlike traditional organ-specific strategies, incorporate inter-organ relations into the model, thus leading to a more accurate representation of the complex human anatomy. Inter-organ relations are not only spatial, but also functional and physiological. Over the years, the strategies 25 proposed to efficiently model multi-organ structures have evolved from the simple global modeling, to more sophisticated approaches such as sequential, hierarchical, or machine learning-based models. In this paper, we present a review of the state of the art on multi-organ analysis and associated computation anatomy methodology. The manuscript follows a methodology-based classification of the different techniques 30 available for the analysis of multi-organs and multi-anatomical structures, from techniques using point distribution models to the most recent deep learning-based approaches. With more than 300 papers included in this review, we reflect on the trends and challenges of the field of computational anatomy, the particularities of each anatomical region, and the potential of multi-organ analysis to increase the impact of 35 medical imaging applications on the future of healthcare.

cs.CV↗