arXiv subjects

Mikhail A. Kats

Publications and source records attributed to Mikhail A. Kats.

At least 55 records · Page 3Linked to original sources

arXiv2020

Hyperspectral interference tomography of nacre

Structural characterization of biologically formed materials is essential for understanding biological phenomena and their environment, and generating new bio-inspired engineering concepts. For example, nacre -- formed by mollusks in the ocean -- encodes local environmental conditions throughout its formation and has exceptional strength due to its nanoscale brick-and-mortar structure. This layered structure, comprising transparent aragonite tablets bonded with an ultra-thin organic polymer, also results in stunning interference colors. Existing methods of structural characterization of nacre rely on some form of cross-sectional analysis, such as scanning electron microscopy or polarization-dependent imaging contrast (PIC) mapping. However, these techniques are destructive and too time- and resource-intensive to analyze large sample areas. Here we present an all-optical, rapid, and non-destructive imaging technique -- hyperspectral interference tomography (HIT) -- to spatially map the structural parameters of nacre and other disordered layered materials. We combined hyperspectral imaging with optical-interference modeling to infer the mean tablet thickness and disordering of nacre layers across entire mollusk shells at various stages of development, observing a previously unknown relationship between the growth of the mollusk and tablet thickness. Our rapid, inexpensive, and nondestructive method can be readily applied to in-field studies.

physics.optics↗

arXiv2020

Adjoint-optimized nanoscale light extractor for nitrogen-vacancy centers in diamond

We designed a nanoscale light extractor (NLE) for efficient outcoupling and beaming of broadband light emitted by shallow, negatively charged nitrogen-vacancy (NV) centers in bulk diamond. The NLE consists of a patterned silicon layer on diamond and requires no etching of the diamond surface. Our design process is based on adjoint optimization using broadband time-domain simulations and yields structures that are inherently robust to positioning and fabrication errors. Our NLE functions like a transmission antenna for the NV center, enhancing the optical power extracted from an NV center positioned 10 nm below the diamond surface by a factor of more than 35, and beaming the light into a +/-30° cone in the far field. This approach to light extraction can be readily adapted to other solid-state color centers.

physics.optics↗

arXiv2020

Ultrathin broadband reflective optical limiter

Optical limiters are nonlinear devices that feature decreasing transmittance with increasing incident optical intensity, and thus can protect sensitive components from high-intensity illumination. The ideal optical limiter reflects rather than absorbs light in its active ("limiting") state, minimizing risk of damage to the limiter itself. Previous efforts to realize reflective limiters were based on embedding nonlinear layers into relatively thick multilayer photonic structures, resulting in substantial fabrication complexity, reduced speed and, in some instances, limited working bandwidth. We overcome these tradeoffs by using the insulator-to-metal transition in vanadium dioxide (VO2) to achieve intensity-dependent modulation of resonant transmission through aperture antennas. Due to the dramatic change of optical properties across the insulator-to-metal transition, low-quality-factor resonators were sufficient to achieve high on-off ratios in device transmittance. As a result, our ultra-thin reflective limiter (thickness ~1/100 of the free-space wavelength) is broadband in terms of operating wavelength (> 2 um at 10 um) and angle of incidence (up to ~50$°$ away from the normal).

physics.optics↗

arXiv2020

Scalable near-infrared graphene plasmonic resonators exhibiting strong non-local and electron quantization effects

Graphene plasmonic resonators have been broadly studied in the terahertz and mid-infrared ranges because of their electrical tunability and large confinement factors which can enable dramatic enhancement of light-matter coupling. In this work, we demonstrate that the characteristic scaling laws of graphene plasmons change for smaller (< 40 nm) plasmonic wavelengths, expanding the operational frequencies of graphene plasmonic resonators into the near-infrared (NIR) and modifying their optical confinement properties. We utilize a novel bottom-up block copolymer lithography method that substantially improves upon top-down methods to create resonators as narrow as 12 nm over centimeter-scale areas. Measurements of these structures reveal that their plasmonic resonances are strongly influenced by non-local and quantum effects, which push their resonant frequency into the NIR (2.2 um), almost double the frequency of previous experimental works. The confinement factors of these resonators, meanwhile, reach 137 +/- 25, amongst the largest reported in literature for an optical cavity. While our findings indicate that the enhancement of some 'forbidden' transitions are an order of magnitude weaker than predicted, the combined NIR response and large confinement of these structures make them an attractive platform to explore ultra-strongly enhanced spontaneous emission.

physics.app-ph↗

arXiv2020

How to organize an online conference

On January 13th 2020, the inaugural Photonics Online Meetup (POM) brought together more than 1100 researchers to discuss the latest advances in photonics. Or rather, it didn't, because the meeting was completely delocalized with the speakers, organizers, and attendees scattered across six continents and hundreds of locations, connected via a video-conferencing tool and social media. Despite this "delocalisation," the meeting retained many characteristics of a traditional conference: invited and contributed talks with follow-up questions and discussion, and a poster session. However, unlike with traditional conferences, all attendees avoided air travel, high registration costs (it was completely free), CO2 emission, or visa issues. Surely the impact on families was minimized as well, though participants in inconvenient time zones had to wake up early or stay up late. In this Comment, we highlight the key steps that enabled this event, offering tips and advice, to aid the organisation of similar Online Meetups.

cs.CY↗

arXiv2019

Guidelines for measurement of thermal emission

Thermal emission is the radiation of electromagnetic waves from hot objects. The promise of thermal-emission engineering for applications in energy harvesting, radiative cooling, and thermal camouflage has recently led to renewed research interest in this topic. There is a substantial need for accurate and precise measurement of thermal emission in a laboratory setting, which can be challenging in part due to the presence of background emission from the surrounding environment and the measurement instrument itself. This is especially true for measurements of emitters at temperatures close to that of the environment, where the impact of background emission is relatively large. In this paper, we describe, recommend, and demonstrate general procedures for thermal-emission measurements that are applicable to most experimental conditions, including less-common and more-challenging cases that include thermal emitters with temperature-dependent emissivity and emitters that are not in thermal equilibrium.

physics.optics↗

arXiv2019

Wide-angle spectrally selective absorbers and thermal emitters based on inverse opals

Engineered optical absorbers are of substantial interest for applications ranging from stray light reduction to energy conversion. We demonstrate a large-area (centimeter-scale) metamaterial that features near-unity frequency-selective absorption in the mid-infrared wavelength range. The metamaterial comprises a self-assembled porous structure known as an inverse opal, here made of silica. The structure's large volume fraction of voids, together with the vibrational resonances of silica in the mid-infrared spectral range, reduce the metamaterial's refractive index to close to that of air and introduce considerable optical absorption. As a result, the frequency-selective structure efficiently absorbs incident light of both polarizations even at very oblique incidence angles. The absorber remains stable at high temperatures (measured up to ~900 degrees C), enabling its operation as a frequency-selective thermal emitter. The excellent performance of this absorber/emitter and ease of fabrication make it a promising surface coating for passive radiative cooling, laser safety, and other large-area applications.

physics.optics↗

arXiv2019

Temperature-independent thermal radiation

Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin thermal emitters that violate this one-to-one relationship via the use of samarium nickel oxide (SmNiO3), a strongly correlated quantum material that undergoes a fully reversible, temperature-driven solid-state phase transition. The smooth and hysteresis-free nature of this unique insulator-to-metal (IMT) phase transition allows us to engineer the temperature dependence of emissivity to precisely cancel out the intrinsic blackbody profile described by the Stefan-Boltzmann law, for both heating and cooling. Our design results in temperature-independent thermally emitted power within the long-wave atmospheric transparency window (wavelengths of 8 - 14 um), across a broad temperature range of ~30 °C, centered around ~120 °C. The ability to decouple temperature and thermal emission opens a new gateway for controlling the visibility of objects to infrared cameras and, more broadly, new opportunities for quantum materials in controlling heat transfer.

physics.optics↗

arXiv2019

Depth thermography: non-invasive 3D temperature profiling using infrared thermal emission

We introduce a technique based on infrared thermal emission, termed depth thermography, that can remotely measure the temperature distribution beneath the surface of certain objects. Depth thermography utilizes the thermal-emission spectrum in the semitransparent spectral region of the target object to extract its temperature as a function of depth, in contrast with conventional thermography, which uses the spectrally integrated thermally emitted power to measure the surface temperature. Coupled with two-dimensional imaging, e.g., using an infrared hyperspectral camera or scanning a single-pixel spectrometer, this technique can yield volumetric temperature distributions. We carried out a proof-of-concept experiment on an asymmetrically heated fused-silica window, extracting the temperature distribution throughout the sample. Depth thermography may enable noncontact volumetric temperature measurements of microscopic objects such as multilayer electronic devices or macroscopic volumes of liquids and gasses as well as simultaneous all-optical measurements of optical and thermal properties.

physics.optics↗

arXiv2019

Self-stabilizing laser sails based on optical metasurfaces

This article investigates the stability of 'laser sail'-style spacecraft constructed from dielectric metasurfaces with areal densities $<$1g/m$^2$. We show that the microscopic optical forces exerted on a metasurface by a high power laser (100 GW) can be engineered to achieve passive self-stabilization, such that it is optically trapped inside the drive beam, and self-corrects against angular and lateral perturbations. The metasurfaces we study consist of a patchwork of beam-steering elements that reflect light at different angles and efficiencies. These properties are varied for each element across the area of the metasurface, and we use optical force modeling tools to explore the behavior of several metasurfaces with different scattering properties as they interact with beams that have different intensity profiles. Finally, we use full-wave numerical simulation tools to extract the actual optical forces that would be imparted on Si/SiO$_{2}$ metasurfaces consisting of more than 400 elements, and we compare those results to our analytical models. We find that under first-order approximations, there are certain metasurface designs that can propel 'laser-sail'-type spacecraft in a stable manner.

physics.optics↗

arXiv2019

Optical properties of thin-film vanadium dioxide from the visible to the far infrared

The insulator-to-metal transition (IMT) in vanadium dioxide (VO2) can enable a variety of optics applications, including switching and modulation, optical limiting, and tuning of optical resonators. Despite the widespread interest in optics, the optical properties of VO2 across its IMT are scattered throughout the literature, and are not available in some wavelength regions. We characterized the complex refractive index of VO2 thin films across the IMT for free-space wavelengths from 300 nm to 30 μm, using broadband spectroscopic ellipsometry, reflection spectroscopy, and the application of effective-medium theory. We studied VO2 thin films of different thickness, on two different substrates (silicon and sapphire), and grown using different synthesis methods (sputtering and sol gel). While there are differences in the optical properties of VO2 synthesized under different conditions, they are relatively minor compared to the change resulting from the IMT, most notably in the ~2 - 11 μm range where the insulating phase of VO2 has relatively low optical loss. We found that the macroscopic optical properties of VO2 are much more robust to sample-to-sample variation compared to the electrical properties, making the refractive-index datasets from this article broadly useful for modeling and design of VO2-based optical and optoelectronic components.

physics.optics↗

arXiv2018

Nanophotonic engineering of far-field thermal emitters

Thermal emission is a ubiquitous and fundamental process by which all objects at non-zero temperatures radiate electromagnetic energy. This process is often presented to be incoherent in both space and time, resulting in broadband, omnidirectional light emission toward the far field, with a spectral density related to the emitter temperature by Planck's law. Over the past two decades, there has been considerable progress in engineering the spectrum, directionality, polarization, and temporal response of thermally emitted light using nanostructured materials. This review summarizes the basic physics of thermal emission, lays out various nanophotonic approaches to engineer thermal-emission in the far field, and highlights several relevant applications, including energy harvesting, lighting, and radiative cooling.

physics.optics↗

arXiv2018

Nanosecond mid-infrared pulse generation via modulated thermal emissivity

We demonstrate the generation of nanosecond mid-infrared pulses via fast modulation of thermal emissivity, enabled by the absorption of visible pump pulses in unpatterned silicon and gallium arsenide. The free-carrier dynamics in these materials result in nanosecond-scale modulation of thermal emissivity, leading to nanosecond pulsed thermal emission. To our knowledge, the nanosecond thermal-emissivity modulation demonstrated in this work is three orders of magnitude faster than what has been previously demonstrated. We also indirectly observed sub-nanosecond thermal pulses from hot carriers in semiconductors. The experiments are well described by our multiphysics model. Our method of converting visible pulses into the mid infrared using modulated emissivity obeys different scaling laws and can have significant wavelength tunability compared to approaches based on conventional nonlinearities.

physics.optics↗

arXiv2018

Thermal-emission measurements near room temperature using Fourier-transform infrared spectroscopy

Accurate characterization of thermal emitters can be challenging due to the presence of background thermal emission from components of the experimental setup and the surrounding environment. This is especially true for an emitter operating close to room temperature. Here, we explore characterization of near-room-temperature thermal emitters using Fourier-transform infrared (FTIR) spectroscopy. We find that the thermal background arising from optical components placed between the beam splitter and the detector in an FTIR spectrometer appears as a "negative" contribution to the Fourier-transformed signal, leading to errors in thermal-emission measurements near room temperature. Awareness of this contribution will help properly calibrate low-temperature thermal-emission measurements.

physics.ins-det↗

arXiv2018

Multi-refractive-index metamaterials based on subwavelength waveguide arrays

We demonstrate a metamaterial that cannot be described by a single set of refractive-index and impedance values, even for fixed frequency and polarization. The metamaterial structure is a stack of dissimilar waveguides with subwavelength width and spacing, which guide light at different phase velocities. This multi-refractive-index metamaterial (MRIM) can be viewed as a spatial superposition of multiple homogeneous materials. Using full-wave simulations, we demonstrate several optical components based on MRIMs, including prisms that deflect light to multiple angles, lenses with multiple focal points, and multi-index Fabry-Perot etalons with an enhanced density of resonant modes. We provide a theoretical framework for analyzing MRIMs to determine effective refractive indices, fractions of power to each channel (i.e., to each refractive index), and transmittance.

physics.optics↗

arXiv2018

Enhancing human color vision by breaking binocular redundancy

To see color, the human visual system combines the response of three types of cone cells in the retina--a compressive process that discards a significant amount of spectral information. Here, we present an approach to enhance human color vision by breaking its inherent binocular redundancy, providing different spectral content to each eye. We fabricated a set of optical filters that "splits" the response of the short-wavelength cone between the two eyes in individuals with typical trichromatic vision, simulating the presence of approximately four distinct cone types ("tetrachromacy"). Such an increase in the number of effective cone types can reduce the prevalence of metamers--pairs of distinct spectra that resolve to the same tristimulus values. This technique may result in an enhancement of spectral perception, with applications ranging from camouflage detection and anti-counterfeiting to new types of artwork and data visualization.

physics.bio-ph↗

arXiv2018

Impact of corrosion on the emissivity of advanced-reactor structural alloys

Under standard operating conditions, the emissivity of structural alloys used for various components of nuclear reactors may evolve, affecting the heat transfer of the systems. In this study, mid-infrared emissivities of several reactor structural alloys were measured before and after exposure to environments relevant to next-generation reactors. We evaluated nickel-based alloys Haynes 230 and Inconel 617 exposed to helium gas at 1000 $^{\circ}$C, nickel-based Hastelloy N and iron-based 316 stainless steel exposed to molten salts at 750-850 $^{\circ}$C, 316 stainless steel exposed to liquid sodium at 650 $^{\circ}$C, and 316 stainless steel and Haynes 230 exposed to supercritical CO2 at 650 $^{\circ}$C. Emissivity was measured via emissive and reflective techniques using a Fourier transform infrared (FTIR) spectrometer. Large increases in emissivity are observed for alloys exposed to oxidizing environments, while only minor differences were observed in other exposure conditions.

physics.app-ph↗

arXiv2018

Mid-infrared optics using dielectrics with refractive indices below unity

Conventional transparent materials at optical frequencies have refractive index values (n) greater than unity -- most commonly between about 1 and 4. This paper explores optical phenomena made possible by using materials with refractive indices less than unity. We focus primarily on fused silica (SiO2), a polar dielectric with strong phonon resonances in the mid infrared that result in a spectral region in which n < 1 with modest optical loss. Using this ubiquitous easy-to-deposit material, we demonstrate infrared-frequency external reflection, frustrated external reflection, and direct coupling to surface plasmon polaritons from free space. Our work suggests that materials with refractive indices below unity can bring significant new functionality to optical devices.

physics.optics↗