arXiv subjects

Min Wang

Publications and source records attributed to Min Wang.

At least 181 records · Page 10Linked to original sources

arXiv2022

Empirical distributions of the robustified $t$-test statistics

Based on the median and the median absolute deviation estimators, and the Hodges-Lehmann and Shamos estimators, robustified analogues of the conventional $t$-test statistic are proposed. The asymptotic distributions of these statistics are recently provided. However, when the sample size is small, it is not appropriate to use the asymptotic distribution of the robustified $t$-test statistics for making a statistical inference including hypothesis testing, confidence interval, p-value, etc. In this article, through extensive Monte Carlo simulations, we obtain the empirical distributions of the robustified $t$-test statistics and their quantile values. Then these quantile values can be used for making a statistical inference.

stat.AP↗

arXiv2022

On-chip integrated Yb3+-doped waveguide amplifiers on thin film lithium niobate

We report the fabrication and optical characterization of Yb3+-doped waveguide amplifiers (YDWA) on the thin film lithium niobate fabricated by photolithography assisted chemo-mechanical etching. The fabricated Yb3+-doped lithium niobate waveguides demonstrates low propagation loss of 0.13 dB/cm at 1030 nm and 0.1 dB/cm at 1060 nm. The internal net gain of 5 dB at 1030 nm and 8 dB at 1060 nm are measured on a 4.0 cm long waveguide pumped by 976nm laser diodes, indicating the gain per unit length of 1.25 dB/cm at 1030 nm and 2 dB/cm at 1060 nm, respectively. The integrated Yb3+-doped lithium niobate waveguide amplifiers will benefit the development of a powerful gain platform and are expected to contribute to the high-density integration of thin film lithium niobate based photonic chip.

physics.optics↗

arXiv2022

An expectation-maximization algorithm for estimating the parameters of the correlated binomial distribution

The correlated binomial (CB) distribution was proposed by Luceño (Computational Statistics $\&$ Data Analysis, 20, 1995, 511-520) as an alternative to the binomial distribution for the analysis of the data in the presence of correlations among events. Due to the complexity of the mixture likelihood of the model, it may be impossible to derive analytical expressions of the maximum likelihood estimators (MLEs) of the unknown parameters. To overcome this difficulty, we develop an expectation-maximization algorithm for computing the MLEs of the CB parameters. Numerical results from simulation studies and a real-data application showed that the proposed method is very effective by consistently reaching a global maximum. Finally, our results should be of interest to senior undergraduate or first-year graduate students and their lecturers with an emphasis on the interested applications of the EM algorithm for finding the MLEs of the parameters in discrete mixture models.

stat.ME↗

arXiv2022

Monolithically integrated waveguide-coupled single-frequency microlaser on erbium-doped thin film lithium niobate

We overcome the difficulty in realizing a monolithic waveguide-coupled microring laser integrated on erbium-doped thin film lithium niobate (Er: TFLN) using photolithography assisted chemo-mechanical etching (PLACE) technique. We demonstrate an integrated single-frequency microring laser operating around 1531 nm wavelength. The PLACE technique, enabling integrated Er: TFLN photonics with low propagation loss, can thus be used to realize low cost mass production of monolithic on-chip microlasers with applications ranging from optical communication and photonic integrated circuit (PIC) to precision metrology and large-scale sensing.

physics.optics↗

arXiv2022

High-production-rate fabrication of low-loss lithium niobate electro-optic modulators using photolithography assisted chemo-mechanical etching (PLACE)

Integrated thin-film lithium niobate (LN) electro-optic (EO) modulators of broad bandwidth, low insertion loss, low cost and high production rate are essential elements in contemporary inter-connection industries and disruptive applications. Here, we demonstrated the design and fabri-cation of a high performance thin-film LN EO modulator using photolithography assisted chemo-mechanical etching (PLACE) technology. Our device shows a 3-dB bandwidth over 50 GHz, along with a comparable low half wave voltage-length product of 2.16 Vcm. We obtain a fiber-to-fiber insertion loss of 2.6 dB.

physics.app-ph↗

arXiv2022

A Feature Weighted Mixed Naive Bayes Model for Monitoring Anomalies in the Fan System of a Thermal Power Plant

With the increasing intelligence and integration, a great number of two-valued variables (generally stored in the form of 0 or 1 value) often exist in large-scale industrial processes. However, these variables cannot be effectively handled by traditional monitoring methods such as LDA, PCA and PLS. Recently, a mixed hidden naive Bayesian model (MHNBM) is developed for the first time to utilize both two-valued and continuous variables for abnormality monitoring. Although MHNBM is effective, it still has some shortcomings that need to be improved. For MHNBM, the variables with greater correlation to other variables have greater weights, which cannot guarantee greater weights are assigned to the more discriminating variables. In addition, the conditional probability must be computed based on the historical data. When the training data is scarce, the conditional probability between continuous variables tends to be uniformly distributed, which affects the performance of MHNBM. Here a novel feature weighted mixed naive Bayes model (FWMNBM) is developed to overcome the above shortcomings. For FWMNBM, the variables that are more correlated to the class have greater weights, which makes the more discriminating variables contribute more to the model. At the same time, FWMNBM does not have to calculate the conditional probability between variables, thus it is less restricted by the number of training data samples. Compared with MHNBM, FWMNBM has better performance, and its effectiveness is validated through the numerical cases of a simulation example and a practical case of Zhoushan thermal power plant (ZTPP), China.

stat.ME↗

arXiv2022

Rethinking Feature Uncertainty in Stochastic Neural Networks for Adversarial Robustness

It is well-known that deep neural networks (DNNs) have shown remarkable success in many fields. However, when adding an imperceptible magnitude perturbation on the model input, the model performance might get rapid decrease. To address this issue, a randomness technique has been proposed recently, named Stochastic Neural Networks (SNNs). Specifically, SNNs inject randomness into the model to defend against unseen attacks and improve the adversarial robustness. However, existed studies on SNNs mainly focus on injecting fixed or learnable noises to model weights/activations. In this paper, we find that the existed SNNs performances are largely bottlenecked by the feature representation ability. Surprisingly, simply maximizing the variance per dimension of the feature distribution leads to a considerable boost beyond all previous methods, which we named maximize feature distribution variance stochastic neural network (MFDV-SNN). Extensive experiments on well-known white- and black-box attacks show that MFDV-SNN achieves a significant improvement over existing methods, which indicates that it is a simple but effective method to improve model robustness.

cs.LG↗

arXiv2021

Tunable partial polarization beam splitter and optomechanically induced Faraday effect

Polarization beam splitter (PBS) is a crucial photonic element to separately extract transverse-electric (TE) and transverse-magnetic (TM) polarizations from the propagating light fields. Here, we propose a concise, continuously tunable and all-optical partial PBS in the vector optomechanical system which contains two orthogonal polarized cavity modes with degenerate frequency. The results show that one can manipulate the polarization states of different output fields by tuning the polarization angle of the pumping field and the system function as partial PBS when the pump laser polarizes vertically or horizontally. As a significant application of the tunable PBS, we propose a scheme of implementing quantum walks in resonator arrays without the aid of other auxiliary systems. Furthermore, we investigate the optomechanically induced Faraday effect in the vector optomechanical system which enables arbitrary tailoring of the input lights and the behaviors of polarization angles of the output fields in the under couple, critical couple, and over couple regimes. Our findings prove the optomechanical system is a potential platform to manipulate the polarization states in multimode resonators and boost the process of applications related to polarization modulation.

physics.optics↗

arXiv2021

Learning Token-based Representation for Image Retrieval

In image retrieval, deep local features learned in a data-driven manner have been demonstrated effective to improve retrieval performance. To realize efficient retrieval on large image database, some approaches quantize deep local features with a large codebook and match images with aggregated match kernel. However, the complexity of these approaches is non-trivial with large memory footprint, which limits their capability to jointly perform feature learning and aggregation. To generate compact global representations while maintaining regional matching capability, we propose a unified framework to jointly learn local feature representation and aggregation. In our framework, we first extract deep local features using CNNs. Then, we design a tokenizer module to aggregate them into a few visual tokens, each corresponding to a specific visual pattern. This helps to remove background noise, and capture more discriminative regions in the image. Next, a refinement block is introduced to enhance the visual tokens with self-attention and cross-attention. Finally, different visual tokens are concatenated to generate a compact global representation. The whole framework is trained end-to-end with image-level labels. Extensive experiments are conducted to evaluate our approach, which outperforms the state-of-the-art methods on the Revisited Oxford and Paris datasets.

eess.IV↗

arXiv2021

Exploring Versatile Prior for Human Motion via Motion Frequency Guidance

Prior plays an important role in providing the plausible constraint on human motion. Previous works design motion priors following a variety of paradigms under different circumstances, leading to the lack of versatility. In this paper, we first summarize the indispensable properties of the motion prior, and accordingly, design a framework to learn the versatile motion prior, which models the inherent probability distribution of human motions. Specifically, for efficient prior representation learning, we propose a global orientation normalization to remove redundant environment information in the original motion data space. Also, a two-level, sequence-based and segment-based, frequency guidance is introduced into the encoding stage. Then, we adopt a denoising training scheme to disentangle the environment information from input motion data in a learnable way, so as to generate consistent and distinguishable representation. Embedding our motion prior into prevailing backbones on three different tasks, we conduct extensive experiments, and both quantitative and qualitative results demonstrate the versatility and effectiveness of our motion prior. Our model and code are available at https://github.com/JchenXu/human-motion-prior.

cs.CV↗

arXiv2021

A high-gain cladded waveguide amplifier on erbium doped thin-film lithium niobate fabricated using photolithography assisted chemo-mechanical etching

Erbium doped integrated waveguide amplifier and laser prevail in power consumption, footprint, stability and scalability over the counterparts in bulk materials, underpinning the lightwave communication and large-scale sensing. Subject to the highly confined mode and moderate propagation loss, gain and power scaling in such integrated micro-to-nanoscale devices prove to be more challenging compared to their bulk counterparts. In this work, stimulated by the prevalent success of double-cladding optical fiber in high-gain/power operation, a Ta2O5 cladding is employed in the erbium doped lithium niobate (LN) waveguide amplifier fabricated on the thin film lithium niobate on insulator (LNOI) wafer by the photolithography assisted chemomechanical etching (PLACE) technique. Above 20 dB small signal internal net gain is achieved at the signal wavelength around 1532 nm in the 10 cm long LNOI amplifier pumped by the diode laser at ~980 nm. Experimental characterizations reveal the advantage of Ta2O5 cladding in higher optical gain compared with the air-clad amplifier, which is further explained by the theoretical modeling of the LNOI amplifier including the guided mode structures and the steady-state response of erbium ions.

physics.optics↗

arXiv2021

Solving Partial Differential Equations with Point Source Based on Physics-Informed Neural Networks

In recent years, deep learning technology has been used to solve partial differential equations (PDEs), among which the physics-informed neural networks (PINNs) emerges to be a promising method for solving both forward and inverse PDE problems. PDEs with a point source that is expressed as a Dirac delta function in the governing equations are mathematical models of many physical processes. However, they cannot be solved directly by conventional PINNs method due to the singularity brought by the Dirac delta function. We propose a universal solution to tackle this problem with three novel techniques. Firstly the Dirac delta function is modeled as a continuous probability density function to eliminate the singularity; secondly a lower bound constrained uncertainty weighting algorithm is proposed to balance the PINNs losses between point source area and other areas; and thirdly a multi-scale deep neural network with periodic activation function is used to improve the accuracy and convergence speed of the PINNs method. We evaluate the proposed method with three representative PDEs, and the experimental results show that our method outperforms existing deep learning-based methods with respect to the accuracy, the efficiency and the versatility.

cs.LG↗

arXiv2021

Contextual Similarity Aggregation with Self-attention for Visual Re-ranking

In content-based image retrieval, the first-round retrieval result by simple visual feature comparison may be unsatisfactory, which can be refined by visual re-ranking techniques. In image retrieval, it is observed that the contextual similarity among the top-ranked images is an important clue to distinguish the semantic relevance. Inspired by this observation, in this paper, we propose a visual re-ranking method by contextual similarity aggregation with self-attention. In our approach, for each image in the top-K ranking list, we represent it into an affinity feature vector by comparing it with a set of anchor images. Then, the affinity features of the top-K images are refined by aggregating the contextual information with a transformer encoder. Finally, the affinity features are used to recalculate the similarity scores between the query and the top-K images for re-ranking of the latter. To further improve the robustness of our re-ranking model and enhance the performance of our method, a new data augmentation scheme is designed. Since our re-ranking model is not directly involved with the visual feature used in the initial retrieval, it is ready to be applied to retrieval result lists obtained from various retrieval algorithms. We conduct comprehensive experiments on four benchmark datasets to demonstrate the generality and effectiveness of our proposed visual re-ranking method.

cs.CV↗

arXiv2021

Decimetric type U solar radio bursts and associated EUV phenomena on 2011 February 9

A GOES M1.9 flare took place in active region AR 11153 on February 9,2011. With the resolution of 200 kHz and a time cadence of 80 ms, the reverse-drifting (RS) type III bursts, intermittent sequence of type U bursts, drifting pulsation structure (DPS), and fine structures were observed by the Yunnan Observatories Solar Radio Spectrometer(YNSRS). Combined information revealed by the multi-wavelength data indicated that after the DPS which observed by YNSRS, the generation rate of type U bursts suddenly increased 5 times than before. In this event, the generation rate of type U bursts may depend on the magnetic reconnection rate. Our observations are consistent with previous numerical simulations results. After the first plasmoid produced (plasma instability occurred), the magnetic reconnection rate increased suddenly 5-8 times than before. Furthermore, after the DPS, the frequency range of turnover frequency of type U bursts is obviously broadened 3 times than before, which indicates the fluctuation amplitude of the density in the loop-top. Our observations also support the numerical simulations during the flare impulsive phase. The turbulence occurs at the top of the flare loop, the plasmoids can trap the non-thermal particles and cause the density fluctuation at the loop-top. The observations are generally consistent with the results of numerical simulations, helping us to better understand the characteristics of the whole physical process of eruption.

astro-ph.SR↗

arXiv2021

Mixed Generalized Multiscale Finite Element Method for Flow Problem in Thin Domains

In this paper, we construct a class of Mixed Generalized Multiscale Finite Element Methods for the approximation on a coarse grid for an elliptic problem in thin two-dimensional domains. We consider the elliptic equation with homogeneous boundary conditions on the domain walls. For reference solution of the problem, we use a Mixed Finite Element Method on a fine grid that resolves complex geometry on the grid level. To construct a lower dimensional model, we use the Mixed Generalized Multiscale Finite Element Method, which is based on some multiscale basis functions for velocity fields. The construction of the basis functions is based on the local snapshot space that takes all possible flows on the interface between coarse cells into account. In order to reduce the size of the snapshot space and obtain the multiscale approximation, we solve a local spectral problem to identify dominant modes in the snapshot space. We present a convergence analysis of the presented multiscale method. Numerical results are presented for two-dimensional problems in three testing geometries along with the errors associated to different numbers of the multiscale basis functions used for the velocity field. Numerical investigations are conducted for problems with homogeneous and heterogeneous properties respectively.

math.NA↗

arXiv2021

The 2nd Anti-UAV Workshop & Challenge: Methods and Results

The 2nd Anti-UAV Workshop \& Challenge aims to encourage research in developing novel and accurate methods for multi-scale object tracking. The Anti-UAV dataset used for the Anti-UAV Challenge has been publicly released. There are two subsets in the dataset, $i.e.$, the test-dev subset and test-challenge subset. Both subsets consist of 140 thermal infrared video sequences, spanning multiple occurrences of multi-scale UAVs. Around 24 participating teams from the globe competed in the 2nd Anti-UAV Challenge. In this paper, we provide a brief summary of the 2nd Anti-UAV Workshop \& Challenge including brief introductions to the top three methods.The submission leaderboard will be reopened for researchers that are interested in the Anti-UAV challenge. The benchmark dataset and other information can be found at: https://anti-uav.github.io/.

cs.CV↗

arXiv2021

On-chip multi-color microdisk laser on Yb3+-doped thin-film lithium niobate

We demonstrate an on-chip Yb3+-doped lithium niobate (LN) microdisk laser. The intrinsic quality factors of the fabricated Yb3+-doped LN microdisk resonator are measured up to 3.79x10^5 at 976 nm wavelength and 1.1x10^6 at 1514 nm wavelength. The multi-mode laser emissions are obtained in a band from 1020 nm to 1070 nm pumped by 984 nm laser and with the low threshold of 103 μW, resulting in a slope efficiency of 0.53% at room temperature. Furthermore, the second-harmonic frequency of pump light and the sum-frequency of the pump light and laser emissions are both generated in the on-chip Yb3+-doped LN microdisk benefited from the strong \c{hi}(2) nonlinearity of LN. These microdisk lasers are expected to contribute to the high-density integration of LNOI-based photonic chip.

physics.optics↗

arXiv2021

Coherent mode-combined ultra-narrow-linewidth single-mode micro-disk laser

Integrated single-mode microlasers with ultra-narrow linewidths play a game-changing role in a broad spectrum of applications ranging from coherent communication and LIDAR to metrology and sensing. Generation of such light sources in a controllable and cost-effective manner remains an outstanding challenge due to the difficulties in the realization of ultra-high Q active micro-resonators with suppressed mode numbers. Here, we report a microlaser generated in an ultra-high Q Erbium doped lithium niobate (LN) micro-disk. Through the formation of coherently combined polygon modes at both pump and laser wavelengths, the microlaser exhibits single mode operation with an ultra-narrow-linewidth of 98 Hz. In combination with the superior electro-optic and nonlinear optical properties of LN crystal, the mass-producible on-chip single-mode microlaser will provide an essential building block for the photonic integrated circuits demanding high precision frequency control and reconfigurability.

physics.optics↗