Searcharxiv⌕ Search

arXiv subjects

Mina Yoon

Publications and source records attributed to Mina Yoon.

At least 37 records · Page 2Linked to original sources
arXiv2023

Doping of Cr in Graphene Using Electron Beam Manipulation for Functional Defect Engineering

Chromium atoms in graphene have been proposed to exhibit magnetic moments and spin-selective conducting states depending on the local bonding geometry within the graphene structure, which could lead to interesting applications in spintronics. Despite this interest, there are few direct experimental reports of Cr dopants in graphene even though it is theorized to be stable. Here, we demonstrate the introduction of single Cr dopant atoms into the graphene lattice and onto graphene edges through the controlled use of a focused electron beam in a scanning transmission electron microscope. We show local control of doping locations and when coupled with targeted in situ milling during scanning of the e-beam, these strategies demonstrate an important component of the fabrication of tailored nanostructured devices in the electron microscope. The approach is validated with first principles calculations to understand synthesis pathways during fabrication and reveal the energetics and local properties of Cr atoms embedded in graphene; e.g., Cr doping can convert graphene into a magnetic and semiconducting material, which suggests Cr-doped graphene can be used as a building block for potential electronic devices and a means to construct them.

cond-mat.mtrl-sci↗
arXiv2023

Universal sublinear resistivity in vanadium kagome materials hosting charge density waves

The recent discovery of a charge density (CDW) state in ScV$_6$Sn$_6$ at $T_{\textrm{CDW}}$ = 91 K offers new opportunities to understand the origins of electronic instabilities in topological kagome systems. By comparing to the isostructural non-CDW compound LuV$_6$Sn$_6$, we unravel interesting electrical transport properties in ScV$_6$Sn$_6$, above and below the charge ordering temperature. We observed that by applying a magnetic field along the $a$ axis, the temperature behavior of the longitudinal resistivity in ScV$_6$Sn$_6$ changes from metal-like to insulator-like above the CDW transition. We show that in the charge ordered state ScV$_6$Sn$_6$ follows the Fermi liquid behavior while above that, it transforms into a non-Fermi liquid phase in which the resistivity varies sublinearly over a broad temperature range. The sublinear resistivity, which scales by $T^{3/5}$ is a common feature among other vanadium-containing kagome compounds exhibiting CDW states such as KV$_3$Sb$_5$, RbV$_3$Sb$_5$, and CsV$_3$Sb$_5$. By contrast, the non-Fermi liquid behavior does not occur in LuV$_6$Sn$_6$. We explain the $T^{3/5}$ universal scaling behavior from the Coulomb scattering between Dirac electrons and Van Hove singularities; common features in the electronic structure of kagome materials. Finally, we show anomalous Hall-like behavior in ScV$_6$Sn$_6$ below $T_{\textrm{CDW}}$, which is absent in the Lu compound. Comparing the transport properties of ScV$_6$Sn$_6$ and LuV$_6$Sn$_6$ is valuable to highlight the impacts of the unusual CDW in the Sc compound.

cond-mat.str-el↗
arXiv2023

Metastability and topology in the magnetic topological insulator MnBi$_{2}$Te$_{4}$

We study the effect of stacking faults on the topological properties of the magnetic topological insulator MnBi$_{2}$Te$_{4}$ (MBT) using density functional theory calculations and the Hubbard $U$ being tuned with many-body diffusion Monte Carlo techniques. We show that a modest deviation from the equilibrium interlayer distance leads to a topological phase transition from a non-trivial to a trivial topology, suggesting that tuning the interlayer coupling by adjusting the interlayer distance alone can lead to different topological phases. Interestingly, due to the locally increased interlayer distance of the top layer, a metastable stacking fault in MBT leads to a nearly gapless state at the topmost layer due to charge redistribution as the topmost layer recedes. We further find evidence of spin-momentum locking in the surface state along with a weak preservation of the band inversion in the near gapless state, which is indicative of the non-trivial topological surface states for the metastable stacking fault. Our findings provide a possible explanation for reconciling the long-standing puzzle of gapped and gapless states on MBT surfaces.

cond-mat.mtrl-sci↗
arXiv2023

Procedures for assessing the stability of proposed topological materials

We investigate the stability of MnPb$_{2}$Bi$_{2}$Te$_{6}$ (MPBT), which is predicted to be a magnetic topological insulator (TI), using density functional theory calculations. Our analysis includes various measures such as enthalpies of formation, Helmholtz free energies, defect formation energies, and dynamical stability. Our thermodynamic analysis shows that the phonon contribution to the energy gain from finite temperature is estimated to be less than 10~meV/atom, which may not be sufficient to stabilize MPBT at high temperatures, even with the most favorable reactions starting from binaries. While MPBT is generally robust against the formation of various defects, we find that anti-site defect formation of $\text{Mn}_{\text{Pb}}$ is the most likely to occur, with corresponding energy less than 60~meV. This can be attributed to the significant energy cost from compressive strain at the PbTe layer. Our findings suggest that MPBT is on the brink of stability in terms of thermodynamics and defect formation, underscoring the importance of conducting systematic analyses of the stability of proposed TIs, including MPBT, for their practical utilization. This study offers valuable insights into the design and synthesis of desirable magnetic TI materials with robust stabilities.

cond-mat.mtrl-sci↗
arXiv2023

Structural Anisotropy in Sb Thin Films

Sb thin films have attracted wide interests due to their tunable band structure, topological phases, and remarkable electronic properties. We successfully grow epitaxial Sb thin films on a closely lattice-matched GaSb(001) surface by molecular beam epitaxy. We find a novel anisotropic directional dependence of their structural, morphological, and electronic properties. The origin of the anisotropic features is elucidated using first-principles density functional theory (DFT) calculations. The growth regime of crystalline and amorphous Sb thin films was determined by mapping the surface reconstruction phase diagram of the GaSb(001) surface under Sb$_2$ flux, with confirmation of structural characterizations. Crystalline Sb thin films show a rhombohedral crystal structure along the rhombohedral (104) surface orientation parallel to the cubic (001) surface orientation of the GaSb substrate. At this coherent interface, Sb atoms are aligned with the GaSb lattice along the [1-10] crystallographic direction but are not aligned well along the [110] crystallographic direction, which results in anisotropic features in reflection high-energy electron diffraction patterns, surface morphology, and transport properties. Our DFT calculations show that the anisotropic features originate from the GaSb surface, where Sb atoms align with the Ga and Sb atoms on the reconstructed surface. The formation energy calculations confirm that the stability of the experimentally observed structures. Our results provide optimal film growth conditions for further studies of novel properties of Bi$_{1-x}$Sb$_x$ thin films with similar lattice parameters and an identical crystal structure as well as functional heterostructures of them with III-V semiconductor layers along the (001) surface orientation, supported by a theoretical understanding of the anisotropic film orientation.

cond-mat.mtrl-sci↗
arXiv2023

Control of Impurity Phase Segregation in a PdCrO$_2$/CuCrO$_2$ Heterostructure

PdCrO$_2$ films are synthesized on CuCrO$_2$ buffer layers on Al$_2$O$_3$ substrates. This synthesis is accompanied by impurity phase segregation, which hampers the synthesis of high quality PdCrO$_2$ films. The potential causes of impurity phase segregation were studied by using a combination of experiments and ab initio calculations. X-ray diffraction and scanning transmission electron microscopy experiments revealed impurity phases of Cu$_x$Pd$_{1-x}$ alloy and chromium oxides, Cr$_2$O$_3$ and Cr$_3$O$_4$, in PdCrO$_2$. Calculations determined that oxygen deficiency can cause the impurity phase segregation. Therefore, preventing oxygen release from delafossites could suppress the impurity phase segregation. The amounts of Cr$_2$O$_3$ and Cr$_3$O$_4$ depend differently on temperature and oxygen partial pressure. A reasonable theory-based explanation for this experimental observation is provided.

cond-mat.mtrl-sci↗
arXiv2023

A New Two-Dimensional Dirac Semimetal Based on the Alkaline Earth Metal, CaP$_3$

Using an evolutionary algorithm in combination with first-principles density functional theory calculations, we identify two-dimensional (2D) CaP$_3$ monolayer as a new Dirac semimetal due to inversion and nonsymmorphic spatial symmetries of the structure. This new topological material, composed of light elements, exhibits high structural stability (higher than the phase known in the literature), which is confirmed by thermodynamic and kinetic stability analysis. Moreover, it satisfies the electron filling criteria, so that its Dirac state is located near the Fermi level. The existence of the Dirac state predicted by the theoretical symmetry analysis is also confirmed by first-principles electronic band structure calculations. We find that the energy position of the Dirac state can be tuned by strain, while the Dirac state is unstable against an external electric field since it breaks the spatial inversion symmetry. Our findings should be instrumental in the development of 2D Dirac fermions based on light elements for their application in nanoelectronic devices and topological electronics.

cond-mat.mtrl-sci↗
arXiv2023

Emergence of a new band and the Lifshitz transition in kagome metal ScV$_6$Sn$_6$ with charge density wave

Topological kagome systems have been a topic of great interest in condensed matter physics due totheir unique electronic properties. The vanadium-based kagome materials are particularly intrigu-ing since they exhibit exotic phenomena such as charge density wave (CDW) and unconventionalsuperconductivity. The origin of these electronic instabilities is not fully understood, and the re-cent discovery of a charge density wave in ScV6Sn6provides a new avenue for investigation. In thiswork, we investigate the electronic structure of the novel kagome metal ScV6Sn6using angle resolvedphotoemission spectroscopy (ARPES), scanning tunneling microscopy (STM), and first-principlesdensity functional theory calculations. Our analysis reveals for the first time the temperature-dependent band changes of ScV6Sn6and identifies a new band that exhibits a strong signatureof a structure with CDW below the critical temperature. Further analysis revealed that this newband is due to the surface kagome layer of the CDW structure. In addition, a Lifshitz transition isidentified in the ARPES spectra that is related to the saddle point moving across the Fermi levelat the critical temperature for the CDW formation. This result shows the CDW behavior may alsobe related to nesting of the saddle point, similar to related materials. However, no energy gap is observed at the Fermi level and thus the CDW is not a typical Fermi surface nesting scenario. These results provide new insights into the underlying physics of the CDW in the kagome materials and could have implications for the development of materials with new functionality.

cond-mat.str-el↗
arXiv2023

Top-down fabrication of atomic patterns in twisted bilayer graphene

Atomic-scale engineering typically involves bottom-up approaches, leveraging parameters such as temperature, partial pressures, and chemical affinity to promote spontaneous arrangement of atoms. These parameters are applied globally, resulting in atomic scale features scattered probabilistically throughout the material. In a top-down approach, different regions of the material are exposed to different parameters resulting in structural changes varying on the scale of the resolution. In this work, we combine the application of global and local parameters in an aberration corrected scanning transmission electron microscope (STEM) to demonstrate atomic scale precision patterning of atoms in twisted bilayer graphene. The focused electron beam is used to define attachment points for foreign atoms through the controlled ejection of carbon atoms from the graphene lattice. The sample environment is staged with nearby source materials, such that the sample temperature can induce migration of the source atoms across the sample surface. Under these conditions, the electron-beam (top-down) enables carbon atoms in the graphene to be replaced spontaneously by diffusing adatoms (bottom-up). Using image-based feedback-control, arbitrary patterns of atoms and atom clusters are attached to the twisted bilayer graphene with limited human interaction. The role of substrate temperature on adatom and vacancy diffusion is explored by first-principles simulations.

cond-mat.mtrl-sci↗
arXiv2022

Cobalt-Based Magnetic Weyl Semimetals with High-Thermodynamic Stabilities

Experiments identified Co3Sn2S2 as the first magnetic Weyl semimetal (MWSM). Using first-principles calculation with a global optimization approach, we explore the structural stabilities and topological electronic properties of cobalt (Co-based shandite and alloys, Co3MM-X2 (M/M-=Ge, Sn, Pb, X=S, Se, Te), and identify new stable structures with new Weyl phases. Using a tight-binding model, for the first time, we reveal that the physical origin of the nodal lines of a Co-based shandite structure is the interlayer coupling between Co atoms in different Kagome layers, while the number of Weyl points and their types are mainly governed by the interaction between Co and the metal atoms, Sn, Ge, and Pb. The Co3SnPbS2 alloy exhibits two distinguished topological phases, depending on the relative positions of the Sn and Pb atoms: a three-dimensional quantum anomalous Hall metal, and a MWSM phase with anomalous Hall conductivity (~1290) that is larger than that of Co2Sn2S2. Our work reveals the physical mechanism of the origination of Weyl fermions in Co-based shandite structures and proposes new topological quantum states with high thermal stability.

cond-mat.mtrl-sci↗
arXiv2022

Non-volatile Electric Control of Magnetic and Topological Properties of MnBi2Te4 Thin Films

In this letter, we propose a mechanism to control the magnetic properties of topological quantum material (TQM) by using magnetoelectric coupling: this mechanism uses a heterostructure of TQM with two-dimensional (2D) ferroelectric material, which can dynamically control the magnetic order by changing the polarization of the ferroelectric material and induce possible topological phase transitions. This concept is demonstrated using the example of the bilayer MnBi2Te4 on ferroelectric In2Se3 or In2Te3, where the polarization direction of the 2D ferroelectrics determines the interfacial band alignment and consequently the direction of the charge transfer. This charge transfer, in turn, enhances the stability of the ferromagnetic state of MnBi2Te4 and leads to a possible topological phase transition between the quantum anomalous Hall (QAH) effect and the zero plateau QAH. Our work provides a route to dynamically alter the magnetic ordering of TQMs and could lead to the discovery of new multifunctional topological heterostructures.

cond-mat.mtrl-sci↗
arXiv2021

Self-regulated growth of candidate topological superconducting parkerite by molecular beam epitaxy

Ternary chalcogenides such as the parkerites and shandites are a broad class of materials exhibiting rich diversity of transport and magnetic behavior as well as an array of topological phases including Weyl and Dirac nodes. However, they remain largely unexplored as high-quality epitaxial thin films. Here, we report the self-regulated growth of thin films of the strong spin-orbit coupled superconductor Pd3Bi2Se2 on SrTiO3 by molecular beam epitaxy. Films are found to grow in a self-regulated fashion, where, in excess Se, the temperature and relative flux ratio of Pd to Bi controls the formation of Pd3Bi2Se2 due to the combined volatility of Bi, Se, and Bi-Se bonded phases. The resulting films are shown to be of high structural quality, the stoichiometry is independent of the Pd:Bi and Se flux ratio and exhibit a superconducting transition temperature of 800 mK and critical field of 17.7 +/- 0.5 mT, as probed by transport as well as magnetometry. Understanding and navigating the growth of the chemically and structurally diverse classes of ternary chalcogenides opens a vast space for discovering new phenomena as well as enabling new applications.

cond-mat.mtrl-sci↗
arXiv2021

Floquet band engineering and topological phase transitions in 1T' transition metal dichalcogenides

Using ab initio tight-binding approaches, we investigate Floquet band engineering of the 1T' phase of transition metal dichalcogenides (MX2, M = W, Mo and X = Te, Se, S) monolayers under the irradiation with circularly polarized light. Our first principles calculations demonstrate that light can induce important transitions in the topological phases of this emerging materials family. For example, upon irradiation, Te-based MX2 undergoes a phase transition from quantum spin Hall (QSH) semimetal to time-reversal symmetry broken QSH insulator with a nontrivial band gap of up to 92.5 meV. On the other hand, Se- and S-based MX2 undergoes the topological phase transition from the QSH effect to the quantum anomalous Hall (QAH) effect and into trivial phases with increasing light intensity. From a general perspective, our work brings further insight into non-equilibrium topological systems.

cond-mat.mtrl-sci↗
arXiv2021

Revealing the chemical bonding in adatoms arrays via machine learning of 3D scanning tunneling spectroscopy data

The adatom arrays on surfaces offer an ideal playground to explore the mechanisms of chemical bonding via changes in the local electronic tunneling spectra. While this information is readily available in hyperspectral scanning tunneling spectroscopy data, its analysis has been considerably impeded by a lack of suitable analytical tools. Here we develop a machine learning based workflow combining supervised feature identification in the spatial domain and un-supervised clustering in the energy domain to reveal the details of structure-dependent changes of the electronic structure in adatom arrays on the Co3Sn2S2 cleaved surface. This approach, in combination with first-principles calculations, provides insight for using artificial neural networks to detect adatoms and classifies each based on their local neighborhood comprised of other adatoms. These structurally classified adatoms are further spectrally deconvolved. The unexpected inhomogeneity of electronic structures among adatoms in similar configurations is unveiled using this method, suggesting there is not a single atomic species of adatoms, but rather multiple types of adatoms on the Co3Sn2S2 surface. This is further supported by a slight contrast difference in the images (or slight size variation) of the topography of the adatoms.

cond-mat.mtrl-sci↗
arXiv2021

GPU-Acceleration of the ELPA2 Distributed Eigensolver for Dense Symmetric and Hermitian Eigenproblems

The solution of eigenproblems is often a key computational bottleneck that limits the tractable system size of numerical algorithms, among them electronic structure theory in chemistry and in condensed matter physics. Large eigenproblems can easily exceed the capacity of a single compute node, thus must be solved on distributed-memory parallel computers. We here present GPU-oriented optimizations of the ELPA two-stage tridiagonalization eigensolver (ELPA2). On top of cuBLAS-based GPU offloading, we add a CUDA kernel to speed up the back-transformation of eigenvectors, which can be the computationally most expensive part of the two-stage tridiagonalization algorithm. We benchmark the performance of this GPU-accelerated eigensolver on two hybrid CPU-GPU architectures, namely a compute cluster based on Intel Xeon Gold CPUs and NVIDIA Volta GPUs, and the Summit supercomputer based on IBM POWER9 CPUs and NVIDIA Volta GPUs. Consistent with previous benchmarks on CPU-only architectures, the GPU-accelerated two-stage solver exhibits a parallel performance superior to the one-stage counterpart. Finally, we demonstrate the performance of the GPU-accelerated eigensolver developed in this work for routine semi-local KS-DFT calculations comprising thousands of atoms.

physics.comp-ph↗
arXiv2020

Temporally-decoherent and spatially-coherent vibrations in metal halide perovskite

The long carrier lifetime and defect tolerance in metal halide perovskites (MHPs) are major contributors to the superb performance of MHP optoelectronic devices. Large polarons were reported to be responsible for the long carrier lifetime. Yet microscopic mechanisms of the large polaron formation including the so-called phonon melting, are still under debate. Here, time-of-flight (TOF) inelastic neutron scattering (INS) experiments and first-principles density-functional theory (DFT) calculations were employed to investigate the lattice vibrations (or phonon dynamics) in methylammonium lead iodide ($\rm{MAPbI_3}$), a prototypical example of MHPs. Our findings are that optical phonons lose temporal coherence gradually with increasing temperature which vanishes at the orthorhombic-to-tetragonal structural phase transition. Surprisingly, however, we found that the spatial coherence is still retained throughout the decoherence process. We argue that the temporally decoherent and spatially coherent vibrations contribute to the formation of large polarons in this metal halide perovskite.

cond-mat.mtrl-sci↗
arXiv2020

Emerging edge states on the surface of the epitaxial semimetal CuMnAs thin film

Epitaxial thin films of CuMnAs have recently attracted attention due to their potential to host relativistic antiferromagnetic spintronics and exotic topological physics. Here we report on the structural and electronic properties of a tetragonal CuMnAs thin film studied using scanning tunneling microscopy (STM) and density functional theory (DFT). STM reveals a surface terminated by As atoms, with the expected semi-metallic behavior. An unexpected zigzag step edge surface reconstruction is observed with emerging electronic states below the Fermi energy. DFT calculations indicate that the step edge reconstruction can be attributed to an As deficiency that results in changes in the density of states of the remaining As atoms at the step edge. This understanding of the surface structure and step edges on the CuMnAs thin film will enable in-depth studies of its topological properties and magnetism.

cond-mat.mes-hall↗
arXiv2019

GPGPU Acceleration of All-Electron Electronic Structure Theory Using Localized Numeric Atom-Centered Basis Functions

We present an implementation of all-electron density-functional theory for massively parallel GPGPU-based platforms, using localized atom-centered basis functions and real-space integration grids. Special attention is paid to domain decomposition of the problem on non-uniform grids, which enables compute- and memory-parallel execution across thousands of nodes for real-space operations, e.g. the update of the electron density, the integration of the real-space Hamiltonian matrix, and calculation of Pulay forces. To assess the performance of our GPGPU implementation, we performed benchmarks on three different architectures using a 103-material test set. We find that operations which rely on dense serial linear algebra show dramatic speedups from GPGPU acceleration: in particular, SCF iterations including force and stress calculations exhibit speedups ranging from 4.5 to 6.6. For the architectures and problem types investigated here, this translates to an expected overall speedup between 3-4 for the entire calculation (including non-GPU accelerated parts), for problems featuring several tens to hundreds of atoms. Additional calculations for a 375-atom Bi$_2$Se$_3$ bilayer show that the present GPGPU strategy scales for large-scale distributed-parallel simulations.

physics.comp-ph↗