arXiv subjects

Mo Li

Publications and source records attributed to Mo Li.

At least 109 records · Page 6Linked to original sources

arXiv2016

The role of electron and phonon temperatures in the helicity-independent all-optical switching of GdFeCo

Ultrafast optical heating of the electrons in ferrimagnetic metals can result in all-optical switching (AOS) of the magnetization. Here we report quantitative measurements of the temperature rise of GdFeCo thin films during helicity-independent AOS. Critical switching fluences are obtained as a function of the initial temperature of the sample and for laser pulse durations from 55 fs to 15 ps. We conclude that non-equilibrium phenomena are necessary for helicity-independent AOS, although the peak electron temperature does not play a critical role. Pump-probe time-resolved experiments show that the switching time increases as the pulse duration increases, with 10 ps pulses resulting in switching times of ~sim 13 ps. These results raise new questions about the fundamental mechanism of helicity-independent AOS.

cond-mat.mes-hall↗

arXiv2016

Picosecond all-optical switching of magnetic tunnel junctions

Control of magnetism without using magnetic fields enables large-scale integration of spintronic devices for memory, computation and communication in the beyond-CMOS era. Mechanisms including spin torque transfer, spin Hall effect, and electric field or strain assisted switching have been implemented to switch magnetization in various spintronic devices. Their operation speed, however, is fundamentally limited by the spin precession time to be longer than 10-100 picoseconds. Overcoming such a speed constraint is critical for the prospective development of spintronics. Here we report the demonstration of picosecond all-optical switching of a magnetic tunnel junction (MTJ)- the building block of spintronic logic and memory -only using single telecom-band, infrared laser pulses. This first optically switchable MTJ uses ferrimagnetic GdFeCo as the free layer, and its switching is directly readout by measuring its tunneling magnetoresistance with a DR/R ratio of 0.6%. An instrument limited switching repetition rate at MHz has been demonstrated, but the fundamental limit should be higher than tens of GHz. This result represents an important step toward integrated opto-spintronic devices that combines spintronics and photonics technologies to enable ultrafast conversion between fundamental information carriers of electron spins and photons.

cond-mat.mtrl-sci↗

arXiv2016

Quantum cloning attacks against PUF-based quantum authentication systems

With the advent of Physical Unclonable Functions (PUFs), PUF-based quantum authentication systems (QAS) have been proposed for security purposes and recently proof-of-principle experiment has been demonstrated. As a further step towards completing the security analysis, we investigate quantum cloning attacks against PUF-based quantum authentication systems and prove that quantum cloning attacks outperform the so-called challenge-estimation attacks. We present the analytical expression of the false accept probability by use of the corresponding optimal quantum cloning machines and extend the previous results in the literature. In light of these findings, an explicit comparison is made between PUF-based quantum authentication systems and quantum key distribution (QKD) protocols in the context of cloning attacks. Moreover, from an experimental perspective, a trade-off between the average photon number and the detection efficiency is discussed in detail.

quant-ph↗

arXiv2016

Optomechanical measurement of photon spin angular momentum and optical torque in integrated photonic devices

Photons carry linear momentum, and spin angular momentum when circularly or elliptically polarized. During light-matter interaction, transfer of linear momentum leads to optical forces, while angular momentum transfer induces optical torque. Optical forces including radiation pressure and gradient forces have long been utilized in optical tweezers and laser cooling. In nanophotonic devices optical forces can be significantly enhanced, leading to unprecedented optomechanical effects in both classical and quantum regimes. In contrast, to date, the angular momentum of light and the optical torque effect remain unexplored in integrated photonics. Here, we demonstrate the measurement of the spin angular momentum of photons propagating in a birefringent waveguide and the use of optical torque to actuate rotational motion of an optomechanical device. We show that the sign and magnitude of the optical torque are determined by the photon polarization states that are synthesized on the chip. Our study reveals the mechanical effect of photon's polarization degree of freedom and demonstrates its control in integrated photonic devices. Exploiting optical torque and optomechanical interaction with photon angular momentum can lead to torsional cavity optomechanics and optomechanical photon spin-orbit coupling, as well as applications such as optomechanical gyroscope and torsional magnetometry.

physics.optics↗

arXiv2015

Revealing the Anisotropic Thermal Conductivity of Black Phosphorus using the Time-Resolved Magneto-Optical Kerr Effect

Black phosphorus (BP) has emerged as a direct-bandgap semiconducting material with great application potentials in electronics, photonics, and energy conversion. Experimental characterization of the anisotropic thermal properties of BP, however, is extremely challenging due to the lack of reliable and accurate measurement techniques to characterize anisotropic samples that are micrometers in size. Here, we report measurement results of the anisotropic thermal conductivity of bulk BP along three primary crystalline orientations, using the novel time-resolved magneto-optical Kerr effect (TR-MOKE) with enhanced measurement sensitivities. Two-dimensional beam-offset TR-MOKE signals from BP flakes yield the thermal conductivity along the zigzag crystalline direction to be 84 ~ 101 W/(m*K), nearly three times as large as that along the armchair direction (26 ~ 36 W/(m*K)). The through-plane thermal conductivity of BP ranges from 4.3 to 5.5 W/(m*K). The first-principles calculation was performed for the first time to predict the phonon transport in BP both along the in-plane zigzag and armchair directions and along the through-plane direction. This work successfully unveiled the fundamental mechanisms of anisotropic thermal transport along the three crystalline directions in bulk BP, as demonstrated by the excellent agreement between our first-principles-based theoretical predictions and experimental characterizations on the anisotropic thermal conductivities of bulk BP.

cond-mat.mtrl-sci↗

arXiv2015

Acousto-optic modulation of a photonic crystal nanocavity with Lamb waves in microwave K band

Integrating nanoscale electromechanical transducers and nanophotonic devices potentially can enable new acousto-optic devices to reach unprecedented high frequencies and modulation efficiency. Here, we demonstrate acousto-optic modulation of a photonic crystal nanocavity using Lamb waves with frequency up to 19 GHz, reaching the microwave K band. The devices are fabricated in suspended aluminum nitride membrane. Excitation of acoustic waves is achieved with interdigital transducers with periods as small as 300 nm. Confining both acoustic wave and optical wave within the thickness of the membrane leads to improved acousto-optic modulation efficiency in the new devices than that obtained in previous surface acoustic wave devices. Our system demonstrates a novel scalable optomechanical platform where strong acousto-optic coupling between cavity-confined photons and high frequency traveling phonons can be explored.

physics.optics↗

arXiv2015

Nanophotonic cavity optomechanics with propagating phonons in microwave Ku band

Sideband-resolved coupling between multiple photonic nanocavities and propagating mechanical waves in microwave Ku-band is demonstrated. Coherent and strong photon-phonon interaction is manifested with optomechanically induced transparency and absorption, and phase-coherent interaction in multiple cavities. Inside an echo chamber it is shown that a phonon pulse can interact with an embedded nanocavity for multiple times. Our device provides a scalable platform to optomechanically couple phonons and photons for microwave photonics and quantum photonics.

physics.optics↗

arXiv2015

Simple rate-adaptive LDPC coding for quantum key distribution

Although quantum key distribution (QKD) comes from the development of quantum theory, the implementation of a practical QKD system does involve a lot of classical process, such as key reconciliation and privacy amplification, which is called post-processing. Post-processing has been a crucial element to high speed QKD systems, even the bottleneck of it because of its relatively high time consumption. Low density parity check (LDPC) is now becoming a promising approach of overcoming the bottleneck due to its good performance in processing throughput. In this article we propose and simulate an easily implemented but efficiently rate-adaptive LDPC coding approach of reconciliation, different from the previously proposed puncturing- and shortening-based approach. We also give a measure for choosing the optimal LDPC parameter for our rate-adaptive approach according to error rates.

quant-ph↗

arXiv2015

A simple implementation of quantum key distribution based on single-photon Bell state measurement

Recently some alternatives of the measurement device independent quantum key distribution(MDI-QKD) based on the single-photon Bell state measurement (SBSM) have been proposed. Although these alternatives are not precisely as secure as MDI-QKD, they possess the advantage of high key rate of traditional BB84-like protocol and avoid the technical complexity of two-photon interference required in the MDI-QKD. However, the setups of these proposed schemes are rather complicated compared to commonly used BB84 systems. Here we propose a simple implementation of SBSM-based QKD which is directly built on the existing realization of BB84 QKD. Our proposal exhibits the hidden connection between SBSM-based QKD and traditional phase-coding QKD protocols. This finding discloses the physics behind these two different types of QKD protocols. In addition, we experimentally demonstrate the feasibility of our protocol.

quant-ph↗

arXiv2014

Waveguide-integrated black phosphorus photodetector with high responsivity and low dark current

Layered two-dimensional materials have shown novel optoelectronic properties and are well suited to be integrated in planar photonic circuits. For example, graphene has been utilized for wideband photodetection. Because graphene lacks a band gap, however, graphene photodetectors suffer from very high dark current. In contrast, layered black phosphorous, the latest addition to the family of 2D materials, is well-suited for photodetector applications due to its narrow but finite band gap. Here, we demonstrate a gated multilayer black phosphorus photodetector integrated on a silicon photonic waveguide operating in the near-infrared telecom band. In a significant advantage over graphene devices, black phosphorus photodetectors can operate under a bias with very low dark current and attain intrinsic responsivity up to 135 mA/W and 657 mA/W in 11.5nm and 100 nm thick devices, respectively, at room temperature. The photocurrent is dominated by the photovoltaic effect with a high response bandwidth exceeding 3 GHz.

physics.optics↗

arXiv2014

Sub-optical wavelength acoustic wave modulation of integrated photonic resonators at microwave frequencies

Light-sound interactions have long been exploited in various acousto-optic devices based on bulk crystalline materials. Conventionally these devices operate in megahertz frequency range where the acoustic wavelength is much longer than the optical wavelength and a long interaction length is required to attain significant coupling. With nanoscale transducers, acoustic waves with sub-optical wavelengths can now be excited to induce strong acousto-optic coupling in nanophotonic devices. Here we demonstrate microwave frequency surface acoustic wave transducers co-integrated with nanophotonic resonators on piezoelectric aluminum nitride substrates. Acousto-optic modulation of the resonance modes at above 10 GHz with the acoustic wavelength significantly below the optical wavelength is achieved. The phase and modal matching conditions in this scheme are investigated for efficient modulation. The new acousto-optic platform can lead to novel optical devices based on nonlinear Brillouin processes and provides a direct, wideband link between optical and microwave photons for microwave photonics and quantum optomechanics.

physics.optics↗

arXiv2014

Decoy state measurement-device-independent quantum key distribution based on the Clauser-Horne-Shimony-Holt inequality

The measurement-device-independent quantum key distribution (MDI-QKD) protocol is proposed to remove the detector side channel attacks, while its security relies on the assumption that the encoding systems are perfectly characterized. In contrast, the MDI-QKD protocol based on the Clauser-Horne-Shimony-Holt inequality (CHSH-MDI-QKD) weakens this assumption, which only requires the quantum state to be prepared in the two-dimensional Hilbert space and the devices are independent. In experimental realizations, the weak coherent state, which is always used in QKD systems due to the lack of an ideal single photon source, may be prepared in the high-dimensional space. In this paper, we investigate the decoy-state CHSH-MDI-QKD protocol with $s(3 \le s \le 5)$ intensities, including one signal state and $s-1$ decoy states, and we also consider the finite-size effect on the decoy-state CHSH-MDI-QKD protocol with five intensities. Simulation results show that this scheme is very practical.

quant-ph↗

arXiv2014

Field and long-term demonstration of a wide area quantum key distribution network

A wide area quantum key distribution (QKD) network deployed on communication infrastructures provided by China Mobile Ltd. is demonstrated. Three cities and two metropolitan area QKD networks were linked up to form the Hefei-Chaohu-Wuhu wide area QKD network with over 150 kilometers coverage area, in which Hefei metropolitan area QKD network was a typical full-mesh core network to offer all-to-all interconnections, and Wuhu metropolitan area QKD network was a representative quantum access network with point-to-multipoint configuration. The whole wide area QKD network ran for more than 5000 hours, from 21 December 2011 to 19 July 2012, and part of the network stopped until last December. To adapt to the complex and volatile field environment, the Faraday-Michelson QKD system with several stability measures was adopted when we designed QKD devices. Through standardized design of QKD devices, resolution of symmetry problem of QKD devices, and seamless switching in dynamic QKD network, we realized the effective integration between point-to-point QKD techniques and networking schemes.

quant-ph↗

arXiv2014

Optomechanical photon shuttling between photonic cavities

Mechanical motion of photonic devices driven by optical forces provides a profound means of coupling between optical fields. The current focus of these optomechanical effects has been on cavity optomechanics systems in which co-localized optical and mechanical modes interact strongly to enable wave-mixing between photons and phonons and backaction cooling of mechanical modes. Alternatively, extended mechanical modes can also induce strong nonlocal effects on propagating optical fields or multiple localized optical modes at distances. Here, we demonstrate a novel multi-cavity optomechanical device: a "photon see-saw", in which torsional optomechanical motion can shuttle photons between two photonic crystal nanocavities. The resonance frequencies of the two cavities, one on each side of the see-saw, are modulated anti-symmetrically by the device's rotation. Pumping photons into one cavity excites optomechanical self-oscillation which strongly modulates the inter-cavity coupling and shuttles photons to the other empty cavity during every oscillation cycle in a well regulated fashion.

quant-ph↗

arXiv2014

Heterogeneously integrated silicon photonics for the mid-infrared and spectroscopic sensing

Besides being the foundational material for microelectronics, in optics, crystalline silicon has long been used for making infrared lenses and mirrors. More recently, silicon has become the key material to achieve large-scale integration of photonic devices for optical interconnect and telecommunication. For optics, silicon has significant advantages: it offers a very high refractive index and is highly transparent in the spectral range from 1.2 to 8 micron. To fully exploit silicon's superior performance in a remarkably broad range and to enable new optoelectronic functionalities, here we describe a general method to integrate silicon photonic devices on arbitrary substrates. In particular, we apply the technique to successfully integrate silicon micro-ring resonators on mid-infrared compatible substrates for operation in the mid-infrared. These high-performance mid-infrared optical resonators are utilized to demonstrate, for the first time, on-chip cavity-enhanced mid-infrared spectroscopic analysis of organic chemicals with a limit of detection of less than 0.1 ng.

physics.optics↗

arXiv2014

Multifunctional graphene optical modulator and photodetector integrated on silicon waveguides

For optical communication, information is converted between optical and electrical signal domains at a high rate. The devices to achieve such a conversion are various types of electro-optical modulators and photodetectors. These two types of optoelectronic devices, equally important, require different materials and consequently it has been challenging to realize both using a single material combination, especially in a way that can be integrated on the ubiquitous silicon platform. Graphene, with its gapless band structure, stands out as a unique optoelectronic material that allows both photodetection and optical modulation. Here, we demonstrate a single graphene-based device that simultaneously provides both efficient optical modulation and photodetection. The graphene device is integrated on a silicon waveguide and is tunable with a gate made from another layer of graphene to achieve near-infrared photodetection responsivity of 57 mA/W and modulation depth of 64%. This novel multifunctional device may lead to many unprecedented optoelectronic applications.

physics.optics↗

arXiv2014

Adiabatic embedment of nanomechanical resonators in photonic microring cavities

We report a circuit cavity optomechanical system in which a nanomechanical resonator is adiabatically embedded inside an optical ring resonator with ultralow transition loss. The nanomechanical device forms part of the top layer of a horizontal silicon slot ring resonator, which enables dispersive coupling to the dielectric substrate via a tapered nanogap. Our measurements show nearly uncompromised optical quality factors (Q) after the release of the mechanical beam.

physics.optics↗

arXiv2014

Measurement-device-independent QKD with Modified Coherent State

The measurement-device-independent quantum key distribution (MDI-QKD) protocol has been proposed for the purpose of removing the detector side channel attacks. Due to the multi-photon events of coherent states sources, real-life implementations of MDI-QKD protocol must employ decoy states to beat the photon-number-splitting attack. Decoy states for MDI-QKD based on the weak coherent states have been studied recently. In this paper, we propose to perform MDI-QKD protocol with modified coherent states (MCS) sources. We simulate the performance of MDI-QKD with the decoy states based on MCS sources. And our simulation indicates that both the secure-key rate and transmission distance can be improved evidently with MCS sources.The physics behind this improvement is that the probability of multi-photon events of the MCS is lower than that of weak coherent states while at the same time the probability of single-photon is higher.

quant-ph↗