arXiv subjects

Mohammad Azzeh

Publications and source records attributed to Mohammad Azzeh.

At least 19 recordsLinked to original sources

arXiv2022

Adopting the Cybersecurity Concepts into Curriculum The Potential Effects on Students Cybersecurity Knowledge

This study examines the effect of adopting cybersecurity concepts on the IT curriculum and determines the potential effect on students' knowledge of cybersecurity practices and level of awareness. To this end, a pilot study was first conducted to measure the current level of cybersecurity awareness. The results revealed that students do not have much knowledge of Cybersecurity. Thus, a four-step approach was proposed to infuse the relevant cybersecurity topics in five matched courses based on the latest Cybersecurity curricular guidelines (CSEC2017). A sample of 42 students was selected purposively without prior knowledge of Cybersecurity and divided identically into experimental and control groups. Students in the experimental group were asked to take five consecutive courses over five semesters. In each course, groups went through a pre-test for the infused topics. Then, the experimental group taught the corresponding infused topics. A post-test was administered to both groups at the end of each course, and the t-test was conducted. The results found significant differences between marks of prior and post-tests for 11 out of 14 infused topics. These satisfactory results would encourage universities to infuse cybersecurity concepts into their curriculum

cs.CR↗

arXiv2022

Predicting students' learning styles using regression techniques

Traditional learning systems have responded quickly to the COVID pandemic and moved to online or distance learning. Online learning requires a personalization method because the interaction between learners and instructors is minimal, and learners have a specific learning method that works best for them. One of the personalization methods is detecting the learners' learning style. To detect learning styles, several works have been proposed using classification techniques. However, the current detection models become ineffective when learners have no dominant style or a mix of learning styles. Thus, the objective of this study is twofold. Firstly, constructing a prediction model based on regression analysis provides a probabilistic approach for inferring the preferred learning style. Secondly, comparing regression models and classification models for detecting learning style. To ground our conceptual model, a set of machine learning algorithms have been implemented based on a dataset collected from a sample of 72 students using visual, auditory, reading/writing, and kinesthetic (VARK's) inventory questionnaire. Results show that regression techniques are more accurate and representative for real-world scenarios than classification algorithms, where students might have multiple learning styles but with different probabilities. We believe that this research will help educational institutes to engage learning styles in the teaching process.

cs.CY↗

arXiv2022

Locally Weighted Regression with different Kernel Smoothers for Software Effort Estimation

Estimating software effort has been a largely unsolved problem for decades. One of the main reasons that hinders building accurate estimation models is the often heterogeneous nature of software data with a complex structure. Typically, building effort estimation models from local data tends to be more accurate than using the entire data. Previous studies have focused on the use of clustering techniques and decision trees to generate local and coherent data that can help in building local prediction models. However, these approaches may fall short in some aspect due to limitations in finding optimal clusters and processing noisy data. In this paper we used a more sophisticated locality approach that can mitigate these shortcomings that is Locally Weighted Regression (LWR). This method provides an efficient solution to learn from local data by building an estimation model that combines multiple local regression models in k-nearest-neighbor based model. The main factor affecting the accuracy of this method is the choice of the kernel function used to derive the weights for local regression models. This paper investigates the effects of choosing different kernels on the performance of Locally Weighted Regression of a software effort estimation problem. After comprehensive experiments with 7 datasets, 10 kernels, 3 polynomial degrees and 4 bandwidth values with a total of 840 Locally Weighted Regression variants, we found that: 1) Uniform kernel functions cannot outperform non-uniform kernel functions, and 2) kernel type, polynomial degrees and bandwidth parameters have no specific effect on the estimation accuracy.

cs.SE↗

arXiv2022

Examining stability of machine learning methods for predicting dementia at early phases of the disease

Dementia is a neuropsychiatric brain disorder that usually occurs when one or more brain cells stop working partially or at all. Diagnosis of this disorder in the early phases of the disease is a vital task to rescue patients lives from bad consequences and provide them with better healthcare. Machine learning methods have been proven to be accurate in predicting dementia in the early phases of the disease. The prediction of dementia depends heavily on the type of collected data which usually are gathered from Normalized Whole Brain Volume (nWBV) and Atlas Scaling Factor (ASF) which are normally measured and corrected from Magnetic Resonance Imaging (MRIs). Other biological features such as age and gender can also help in the diagnosis of dementia. Although many studies use machine learning for predicting dementia, we could not reach a conclusion on the stability of these methods for which one is more accurate under different experimental conditions. Therefore, this paper investigates the conclusion stability regarding the performance of machine learning algorithms for dementia prediction. To accomplish this, a large number of experiments were run using 7 machine learning algorithms and two feature reduction algorithms namely, Information Gain (IG) and Principal Component Analysis (PCA). To examine the stability of these algorithms, thresholds of feature selection were changed for the IG from 20% to 100% and the PCA dimension from 2 to 8. This has resulted in 7x9 + 7x7= 112 experiments. In each experiment, various classification evaluation data were recorded. The obtained results show that among seven algorithms the support vector machine and Naive Bayes are the most stable algorithms while changing the selection threshold. Also, it was found that using IG would seem more efficient than using PCA for predicting Dementia.

cs.LG↗

arXiv2022

An Interactive Automation for Human Biliary Tree Diagnosis Using Computer Vision

The biliary tree is a network of tubes that connects the liver to the gallbladder, an organ right beneath it. The bile duct is the major tube in the biliary tree. The dilatation of a bile duct is a key indicator for more major problems in the human body, such as stones and tumors, which are frequently caused by the pancreas or the papilla of vater. The detection of bile duct dilatation can be challenging for beginner or untrained medical personnel in many circumstances. Even professionals are unable to detect bile duct dilatation with the naked eye. This research presents a unique vision-based model for biliary tree initial diagnosis. To segment the biliary tree from the Magnetic Resonance Image, the framework used different image processing approaches (MRI). After the image's region of interest was segmented, numerous calculations were performed on it to extract 10 features, including major and minor axes, bile duct area, biliary tree area, compactness, and some textural features (contrast, mean, variance and correlation). This study used a database of images from King Hussein Medical Center in Amman, Jordan, which included 200 MRI images, 100 normal cases, and 100 patients with dilated bile ducts. After the characteristics are extracted, various classifiers are used to determine the patients' condition in terms of their health (normal or dilated). The findings demonstrate that the extracted features perform well with all classifiers in terms of accuracy and area under the curve. This study is unique in that it uses an automated approach to segment the biliary tree from MRI images, as well as scientifically correlating retrieved features with biliary tree status that has never been done before in the literature.

eess.IV↗

arXiv2022

Application of Machine Learning for Online Reputation Systems

Users on the internet usually require venues to provide better purchasing recommendations. This can be provided by a reputation system that processes ratings to provide recommendations. The rating aggregation process is a main part of reputation system to produce global opinion about the product quality. Naive methods that are frequently used do not consider consumer profiles in its calculation and cannot discover unfair ratings and trends emerging in new ratings. Other sophisticated rating aggregation methods that use weighted average technique focus on one or a few aspects of consumers profile data. This paper proposes a new reputation system using machine learning to predict reliability of consumers from consumer profile. In particular, we construct a new consumer profile dataset by extracting a set of factors that have great impact on consumer reliability, which serve as an input to machine learning algorithms. The predicted weight is then integrated with a weighted average method to compute product reputation score. The proposed model has been evaluated over three MovieLens benchmarking datasets, using 10-Folds cross validation. Furthermore, the performance of the proposed model has been compared to previous published rating aggregation models. The obtained results were promising which suggest that the proposed approach could be a potential solution for reputation systems. The results of comparison demonstrated the accuracy of our models. Finally, the proposed approach can be integrated with online recommendation systems to provide better purchasing recommendations and facilitate user experience on online shopping markets.

cs.LG↗

arXiv2022

Software Defect Prediction Using Support Vector Machine

Software defect prediction is an essential task during the software development Lifecycle as it can help managers to identify the most defect-proneness modules. Thus, it can reduce the test cost and assign testing resources efficiently. Many classification methods can be used to determine if the software is defective or not. Support Vector Machine (SVM) has not been used extensively for such problems because of its instability when applied on different datasets and parameter settings. The main parameter that influences the accuracy is the choice of the kernel function. The use of kernel functions has not been studied thoroughly in previous papers. Therefore, this research examines the performance and accuracy of SVM with six different kernel functions. Various public datasets from the PROMISE project empirically validate our hypothesis. The results demonstrate that no kernel function can give stable performance across different experimental settings. In addition, the use of PCA as a feature reduction algorithm shows slight accuracy improvement over some datasets.

cs.SE↗

arXiv2022

On the Value of Project Productivity for Early Effort Estimation

In general, estimating software effort using a Use Case Point (UCP) size requires the use of productivity as a second prediction factor. However, there are three drawbacks to this approach: (1) there is no clear procedure for predicting productivity in the early stages, (2) the use of fixed or limited productivity ratios does not allow research to reflect the realities of the software industry, and (3) productivity from historical data is often challenging. The new UCP datasets now available allow us to perform further empirical investigations of the productivity variable in order to estimate the UCP effort. Accordingly, four different prediction models based on productivity were used. The results showed that learning productivity from historical data is more efficient than using classical approaches that rely on default or limited productivity values. In addition, predicting productivity from historical environmental factors is not often accurate. From here we conclude that productivity is an effective factor for estimating the software effort based on the UCP in the presence and absence of previous historical data. Moreover, productivity measurement should be flexible and adjustable when historical data is available

cs.SE↗

arXiv2021

Artificial Intelligence and Statistical Techniques in Short-Term Load Forecasting: A Review

Electrical utilities depend on short-term demand forecasting to proactively adjust production and distribution in anticipation of major variations. This systematic review analyzes 240 works published in scholarly journals between 2000 and 2019 that focus on applying Artificial Intelligence (AI), statistical, and hybrid models to short-term load forecasting (STLF). This work represents the most comprehensive review of works on this subject to date. A complete analysis of the literature is conducted to identify the most popular and accurate techniques as well as existing gaps. The findings show that although Artificial Neural Networks (ANN) continue to be the most commonly used standalone technique, researchers have been exceedingly opting for hybrid combinations of different techniques to leverage the combined advantages of individual methods. The review demonstrates that it is commonly possible with these hybrid combinations to achieve prediction accuracy exceeding 99%. The most successful duration for short-term forecasting has been identified as prediction for a duration of one day at an hourly interval. The review has identified a deficiency in access to datasets needed for training of the models. A significant gap has been identified in researching regions other than Asia, Europe, North America, and Australia.

cs.LG↗

arXiv2021

Empirical Analysis on Productivity Prediction and Locality for Use Case Points Method

Use Case Points (UCP) method has been around for over two decades. Although, there was a substantial criticism concerning the algebraic construction and factors assessment of UCP, it remains an efficient early size estimation method. Predicting software effort from UCP is still an ever-present challenge. The earlier version of UCP method suggested using productivity as a cost driver, where fixed or a few pre-defined productivity ratios have been widely agreed. While this approach was successful when no enough historical data is available, it is no longer acceptable because software projects are different in terms of development aspects. Therefore, it is better to understand the relationship between productivity and other UCP variables. This paper examines the impact of data locality approaches on productivity and effort prediction from multiple UCP variables. The environmental factors are used as partitioning factors to produce local homogeneous data either based on their influential levels or using clustering algorithms. Different machine learning methods, including solo and ensemble methods, are used to construct productivity and effort prediction models based on the local data. The results demonstrate that the prediction models that are created based on local data surpass models that use entire data. Also, the results show that conforming the hypothetical assumption between productivity and environmental factors is not necessarily a requirement for success of locality.

cs.SE↗

arXiv2020

Predicting Software Effort from Use Case Points: A Systematic Review

Context: Predicting software project effort from Use Case Points (UCP) method is increasingly used among researchers and practitioners. However, unlike other effort estimation domains, this area of interest has not been systematically reviewed. Aims: There is a need for a systemic literature review to provide directions and supports for this research area of effort estimation. Specifically, the objective of this study is twofold: to classify UCP effort estimation papers based on four criteria: contribution type, research approach, dataset type and techniques used with UCP; and to analyze these papers from different views: estimation accuracy, favorable estimation context and impact of combined techniques on the accuracy of UCP. Method: We used the systematic literature review methodology proposed by Kitchenham and Charters. This includes searching for the most relevant papers, selecting quality papers, extracting data and drawing results. Result: The authors of UCP research paper, are generally not aware of previous published results and conclusions in the field of UCP effort estimation. There is a lack of UCP related publications in the top software engineering journals. This makes a conclusion that such papers are not useful for the community. Furthermore, most articles used small numbers of projects which cannot support generalizing the conclusion in most cases. Conclusions: There are multiple research directions for UCP method that have not been examined so far such as validating the algebraic construction of UCP based on industrial data. Also, there is a need for standard automated tools that govern the process of translating use case diagram into its corresponding UCP metrics. Although there is an increase interest among researchers to collect industrial data and build effort prediction models based on machine learning methods, the quality of data is still subject to debate

cs.SE↗

arXiv2019

Software Development Effort Estimation Using Regression Fuzzy Models

Software effort estimation plays a critical role in project management. Erroneous results may lead to overestimating or underestimating effort, which can have catastrophic consequences on project resources. Machine-learning techniques are increasingly popular in the field. Fuzzy logic models, in particular, are widely used to deal with imprecise and inaccurate data. The main goal of this research was to design and compare three different fuzzy logic models for predicting software estimation effort: Mamdani, Sugeno with constant output and Sugeno with linear output. To assist in the design of the fuzzy logic models, we conducted regression analysis, an approach we call regression fuzzy logic. State-of-the-art and unbiased performance evaluation criteria such as standardized accuracy, effect size and mean balanced relative error were used to evaluate the models, as well as statistical tests. Models were trained and tested using industrial projects from the International Software Benchmarking Standards Group (ISBSG) dataset. Results showed that data heteroscedasticity affected model performance. Fuzzy logic models were found to be very sensitive to outliers. We concluded that when regression analysis was used to design the model, the Sugeno fuzzy inference system with linear output outperformed the other models.

cs.SE↗

arXiv2018

Ensemble of Learning Project Productivity in Software Effort Based on Use Case Points

It is well recognized that the project productivity is a key driver in estimating software project effort from Use Case Point size metric at early software development stages. Although, there are few proposed models for predicting productivity, there is no consistent conclusion regarding which model is the superior. Therefore, instead of building a new productivity prediction model, this paper presents a new ensemble construction mechanism applied for software project productivity prediction. Ensemble is an effective technique when performance of base models is poor. We proposed a weighted mean method to aggregate predicted productivities based on average of errors produced by training model. The obtained results show that the using ensemble is a good alternative approach when accuracies of base models are not consistently accurate over different datasets, and when models behave diversely.

cs.LG↗

arXiv2018

v-SVR Polynomial Kernel for Predicting the Defect Density in New Software Projects

An important product measure to determine the effectiveness of software processes is the defect density (DD). In this study, we propose the application of support vector regression (SVR) to predict the DD of new software projects obtained from the International Software Benchmarking Standards Group (ISBSG) Release 2018 data set. Two types of SVR (e-SVR and v-SVR) were applied to train and test these projects. Each SVR used four types of kernels. The prediction accuracy of each SVR was compared to that of a statistical regression (i.e., a simple linear regression, SLR). Statistical significance test showed that v-SVR with polynomial kernel was better than that of SLR when new software projects were developed on mainframes and coded in programming languages of third generation

cs.SE↗

arXiv2018

Machine Learning Classifications of Coronary Artery Disease

Coronary Artery Disease (CAD) is one of the leading causes of death worldwide, and so it is very important to correctly diagnose patients with the disease. For medical diagnosis, machine learning is a useful tool, however features and algorithms must be carefully selected to get accurate classification. To this effect, three feature selection methods have been used on 13 input features from the Cleveland dataset with 297 entries, and 7 were selected. The selected features were used to train three different classifiers, which are SVM, Naïve Bayes and KNN using 10-fold cross-validation. The resulting models evaluated using Accuracy, Recall, Specificity and Precision. It is found that the Naïve Bayes classifier performs the best on this dataset and features, outperforming or matching SVM and KNN in all the four evaluation parameters used and achieving an accuracy of 84%.

cs.LG↗

arXiv2017

Neural Network Models for Software Development Effort Estimation: A Comparative Study

Software development effort estimation (SDEE) is one of the main tasks in software project management. It is crucial for a project manager to efficiently predict the effort or cost of a software project in a bidding process, since overestimation will lead to bidding loss and underestimation will cause the company to lose money. Several SDEE models exist; machine learning models, especially neural network models, are among the most prominent in the field. In this study, four different neural network models: Multilayer Perceptron, General Regression Neural Network, Radial Basis Function Neural Network, and Cascade Correlation Neural Network are compared with each other based on: (1) predictive accuracy centered on the Mean Absolute Error criterion, (2) whether such a model tends to overestimate or underestimate, and (3) how each model classifies the importance of its inputs. Industrial datasets from the International Software Benchmarking Standards Group (ISBSG) are used to train and validate the four models. The main ISBSG dataset was filtered and then divided into five datasets based on the productivity value of each project. Results show that the four models tend to overestimate in 80percent of the datasets, and the significance of the model inputs varies based on the selected model. Furthermore, the Cascade Correlation Neural Network outperforms the other three models in the majority of the datasets constructed on the Mean Absolute Residual criterion.

cs.SE↗

arXiv2017

Analyzing the Relationship between Project Productivity and Environment Factors in the Use Case Points Method

Project productivity is a key factor for producing effort estimates from Use Case Points (UCP), especially when the historical dataset is absent. The first versions of UCP effort estimation models used a fixed number or very limited numbers of productivity ratios for all new projects. These approaches have not been well examined over a large number of projects so the validity of these studies was a matter for criticism. The newly available large software datasets allow us to perform further research on the usefulness of productivity for effort estimation of software development. Specifically, we studied the relationship between project productivity and UCP environmental factors, as they have a significant impact on the amount of productivity needed for a software project. Therefore, we designed four studies, using various classification and regression methods, to examine the usefulness of that relationship and its impact on UCP effort estimation. The results we obtained are encouraging and show potential improvement in effort estimation. Furthermore, the efficiency of that relationship is better over a dataset that comes from industry because of the quality of data collection. Our comment on the findings is that it is better to exclude environmental factors from calculating UCP and make them available only for computing productivity. The study also encourages project managers to understand how to better assess the environmental factors as they do have a significant impact on productivity

cs.SE↗

arXiv2017

A Comparative Study for Predicting Heart Diseases Using Data Mining Classification Methods

Improving the precision of heart diseases detection has been investigated by many researchers in the literature. Such improvement induced by the overwhelming health care expenditures and erroneous diagnosis. As a result, various methodologies have been proposed to analyze the disease factors aiming to decrease the physicians practice variation and reduce medical costs and errors. In this paper, our main motivation is to develop an effective intelligent medical decision support system based on data mining techniques. In this context, five data mining classifying algorithms, with large datasets, have been utilized to assess and analyze the risk factors statistically related to heart diseases in order to compare the performance of the implemented classifiers (e.g., Naïve Bayes, Decision Tree, Discriminant, Random Forest, and Support Vector Machine). To underscore the practical viability of our approach, the selected classifiers have been implemented using MATLAB tool with two datasets. Results of the conducted experiments showed that all classification algorithms are predictive and can give relatively correct answer. However, the decision tree outperforms other classifiers with an accuracy rate of 99.0% followed by Random forest. That is the case because both of them have relatively same mechanism but the Random forest can build ensemble of decision tree. Although ensemble learning has been proved to produce superior results, but in our case the decision tree has outperformed its ensemble version.

cs.CY↗