arXiv subjects

Morten Hannibal Madsen

Publications and source records attributed to Morten Hannibal Madsen.

13 recordsLinked to original sources

arXiv2026

20 Second Parity Lifetime in an InAs--Pb Tetron Device

A central promise of topological quantum computing is that increasing the excitation gap improves device performance significantly. Here, we experimentally validate this principle in an InAs--Pb tetron device via interferometric single-shot parity measurements. By replacing aluminum with the higher-gap superconductor lead in our superconductor-semiconductor hybrid devices, we have improved the robustness of our topological phase. In addition, to enable fast and precise bring-up at scale, we have developed an rf measurement technique that resolves low-energy wire-end states and directly measures their energy splitting with $μ\text{eV}$ precision. We employ this technique to bring up a device in a multi-tetron array and perform parity measurements of one of the tetron's hybrid nanowires (NWs). By controllably switching the wire parity, we observe $h/2e$-periodic bimodal shifts in the quantum capacitance of a quantum dot coupled to the hybrid nanowire in an interference loop. Further time-resolved measurements reveal a characteristic parity switching time of $\sim 20$ s with some instances reaching minute-scale. Such extremely long parity lifetimes are orders of magnitude longer than typical qubit operation times, which are on the order of $μ\text{s}$. Finally, we discuss potential implications for the fidelity of Pauli measurements.

cond-mat.mes-hall↗

arXiv2025

Distinct Lifetimes for $X$ and $Z$ Loop Measurements in a Majorana Tetron Device

We present a hardware realization and measurements of a tetron qubit device in a superconductor-semiconductor heterostructure. The device architecture contains two parallel superconducting nanowires, which support four Majorana zero modes (MZMs) when tuned into the topological phase, and a trivial superconducting backbone. Two distinct readout interferometers are formed by connecting the superconducting structure to a series of quantum dots. We perform single-shot interferometric measurements of the fermion parity for the two loops, designed to implement Pauli-$X$ and $Z$ measurements of the tetron. Performing repeated single-shot measurements yields two widely separated time scales $τ_X = 14.5\pm 0.3 \, \mathrm{μs}$ and $τ_Z = 12.4\pm 0.4\, \mathrm{ms}$ for parity switches observed in the $X$ and $Z$ measurement loops, which we attribute to intra-wire parity switches and external quasiparticle poisoning, respectively. We estimate assignment errors of $\mathrm{err}^X_a=16\%$ and $\mathrm{err}^Z_a=0.5\%$ for $X$ and $Z$ measurement-based operations, respectively.

cond-mat.mes-hall↗

arXiv2025

Roadmap to fault tolerant quantum computation using topological qubit arrays

We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operations; an eight-qubit device that can be used to show an improvement of a two-qubit operation when performed on logical qubits rather than directly on physical qubits; and a topological qubit array supporting lattice surgery demonstrations on two logical qubits. Devices that enable this path require a superconductor-semiconductor heterostructure that supports a topological phase, quantum dots and coupling between those quantum dots that can create the appropriate loops for interferometric measurements, and a microwave readout system that can perform fast, low-error single-shot measurements. We describe the key design components of these qubit devices, along with the associated protocols for demonstrations of single-qubit benchmarking, Clifford gate execution, quantum error detection, and quantum error correction, which differ greatly from those in more conventional qubits. Finally, we comment on implications and advantages of this architecture for utility-scale quantum computation.

quant-ph↗

arXiv2025

Response to recent comments on Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supp. Info. for Nature 638, 651-655 (2025)

The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscripts [arXiv:2502.19560, arXiv:2503.08944] engage with the topological gap protocol and its use in Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supplementary Information for Nature 638, 651-655 (2025), although they do not explicitly dispute the main results of either one. We demonstrate that the objections in arXiv:2502.19560 and arXiv:2503.08944 are unfounded, and we uphold the conclusions of Phys. Rev. B 107, 245423 (2023) and Nature 638, 651-655 (2025). Specifically, we show that no flaws have been identified in our estimate of the false discovery rate (FDR). We provide a point-by-point rebuttal of the comments in arXiv:2502.19560 and arXiv:2503.08944.

cond-mat.mes-hall↗

arXiv2024

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%.

cond-mat.mes-hall↗

arXiv2024

InAs-Al Hybrid Devices Passing the Topological Gap Protocol

We present measurements and simulations of semiconductor-superconductor heterostructure devices that are consistent with the observation of topological superconductivity and Majorana zero modes. The devices are fabricated from high-mobility two-dimensional electron gases in which quasi-one-dimensional wires are defined by electrostatic gates. These devices enable measurements of local and non-local transport properties and have been optimized via extensive simulations to ensure robustness against non-uniformity and disorder. Our main result is that several devices, fabricated according to the design's engineering specifications, have passed the topological gap protocol defined in Pikulin et al. [arXiv:2103.12217]. This protocol is a stringent test composed of a sequence of three-terminal local and non-local transport measurements performed while varying the magnetic field, semiconductor electron density, and junction transparencies. Passing the protocol indicates a high probability of detection of a topological phase hosting Majorana zero modes as determined by large-scale disorder simulations. Our experimental results are consistent with a quantum phase transition into a topological superconducting phase that extends over several hundred millitesla in magnetic field and several millivolts in gate voltage, corresponding to approximately one hundred micro-electron-volts in Zeeman energy and chemical potential in the semiconducting wire. These regions feature a closing and re-opening of the bulk gap, with simultaneous zero-bias conductance peaks at both ends of the devices that withstand changes in the junction transparencies. The extracted maximum topological gaps in our devices are 20-60 $μ$eV. This demonstration is a prerequisite for experiments involving fusion and braiding of Majorana zero modes.

cond-mat.mes-hall↗

arXiv2021

Selective Area Growth Rates of III-V Nanowires

Selective area growth (SAG) of semiconductors is a scalable method for fabricating gate-controlled quantum platforms. This letter reports on the adatom diffusion, incorporation, and desorption mechanisms that govern the growth rates of SAG nanowire (NW) arrays. We propose a model for the crystal growth rates that considers two parameter groups: the crystal growth control parameters and the design parameters. Using GaAs and InGaAs SAG NWs as platform we show how the design parameters such as NW pitch, width, and orientation have an impact on the growth rates. We demonstrate that by varying the control parameters (i.e. substrate temperature and beam fluxes) source, balance, and sink growth modes may exist in the SAG selectivity window. Using this model, we show that inhomogeneous growth rates can be compensated by tuning the design parameters.

cond-mat.mtrl-sci↗

arXiv2016

Tuning Yu-Shiba-Rusinov States in a Quantum Dot

We present transport spectroscopy of sub-gap states in a bottom gated InAs nanowire coupled to a normal lead and a superconducting aluminium lead. The device shows clearly resolved sub-gap states which we can track as the coupling parameters of the system are tuned and as the gap is closed by means of a magnetic field. We systematically extract system parameters by using numerical renormalization group theory fits as a level of the quantum dot is tuned through a quantum phase transition electrostatically and magnetically. We also give an intuitive description of sub-gap excitations.

cond-mat.supr-con↗

arXiv2016

Electrical tuning of Rashba spin-orbit interaction in multigated InAs nanowires

Indium arsenide (InAs) nanowires (NWs) are a promising platform to fabricate quantum electronic devices, among others they have strong spin-orbit interaction (SOI). The controlled tuning of the SOI is desired in spin based quantum devices. In this study we investigate the possibility of tuning the SOI by electrostatic field, which is generated by a back gate and two side gates placed on the opposite sides of the NW. The strength of the SOI is analyzed by weak anti-localization effect. We demonstrate that the strength of SOI can be strongly tuned by a factor of 2 with the electric field across the NW, while the average electron density is kept constant. Furthermore a simple electrostatic model is introduced to calculate the expected change of SOI. Good agreement is found between the experimental results and the estimated Rashba type SOI generated by the gate-induced electric field.

cond-mat.mes-hall↗

arXiv2015

Alignment free characterization of 2D gratings

Fast characterization of 2-dimensional gratings is demonstrated using a Fourier lens optical system and a differential optimization algorithm. It is shown that both the grating specific parameters such as the basis vectors and the angle between them and the alignment of the sample, such as the rotation of the sample around the x-, y-, and z-axis, can be deduced from a single measurement. More specifically, the lattice vectors and the angle between them have been measured, while the corrections of the alignment parameters are used to improve the quality of the measurement, and hence reduce the measurement uncertainty. Alignment free characterization is demonstrated on both a 2D hexagonal grating with a period of 700 nm and a checkerboard grating with a pitch of 3000 nm. The method can also be used for both automatic alignment and in-line characterization of gratings.

physics.ins-det↗

arXiv2015

Imaging Scatterometry

We present an optical metrology system for characterization of topography of micro/nano-structures on a surface or embedded in a semi-transparent material. Based on the principles of scatterometry, where the intensity of scattered light is used as a 'fingerprint' to reconstruct a surface, this new imaging scatterometer can easily find areas of interest on the cm scale and measure multiple segments simultaneously. The imaging scatterometer measures structural features, such as height, width, and sidewall angle of a grating locally on few um2 areas with nm resolution. We demonstrate two imaging scatterometers, one built into an optical microscope and one in a split configuration. The two scatterometers are targeted characterization of mm2 and cm2 areas, respectively, and both setups are validated using nano-textured samples.

physics.ins-det↗

arXiv2015

Fast Characterization of Moving Samples with Nano-Textured Surfaces

We characterize nano-textured surfaces by optical diffraction techniques using an adapted commercial light microscope with two detectors, a CCD camera and a spectrometer. The acquisition and analyzing time for the topological parameters height, width, and sidewall angle is only a few milliseconds of a grating. We demonstrate that the microscope has a resolution in the nanometer range, also in an environment with many vibrations, such as a machine floor. Furthermore, we demonstrate an easy method to find the area of interest with the integrated CCD camera.

physics.optics↗

arXiv2013

Advances in the theory of III-V Nanowire Growth Dynamics

Nanowire (NW) crystal growth via the vapour_liquid_solid mechanism is a complex dynamic process involving interactions between many atoms of various thermodynamic states. With increasing speed over the last few decades many works have reported on various aspects of the growth mechanisms, both experimentally and theoretically. We will here propose a general continuum formalism for growth kinetics based on thermodynamic parameters and transition state kinetics. We use the formalism together with key elements of recent research to present a more overall treatment of III_V NW growth, which can serve as a basis to model and understand the dynamical mechanisms in terms of the basic control parameters, temperature and pressures/beam fluxes. Self-catalysed GaAs NW growth on Si substrates by molecular beam epitaxy is used as a model system.

cond-mat.mes-hall↗