Searcharxiv⌕ Search

arXiv subjects

Musa Furkan Keskin

Publications and source records attributed to Musa Furkan Keskin.

At least 37 records · Page 2Linked to original sources

RIS Nearfield Position and Velocity Estimation Using a Validated Propagation Model

We investigate reconfigurable intelligent surfaces (RISs) for the task of position and velocity estimation in non-LOS (NLOS) indoor scenarios, using a snapshot based multi-step estimation algorithm. We evaluate a compound RIS structure prototype composed of four RIS tiles with 1-bit phase control per RIS unit cell. Numerical simulation results taking the antenna patterns into account are presented for an 3 m x 3 m area of interest. We demonstrate that the initial grid search step using the far field assumption is not robust enough for small distances to the RIS center and propose a more robust algorithm. Furthermore, we show that the effect of the antenna pattern causes an increased position and velocity error. Our modified three-step algorithm achieves a position error of 7 mm and a velocity error of 0.12 m/s at a distance of 2 m to the RIS center under a realistic numerical propagation model.

eess.SP↗

Phase-Only Positioning in Distributed MIMO Under Phase Impairments: AP Selection Using Deep Learning

Carrier phase positioning (CPP) can enable cm-level accuracy in next-generation wireless systems, while recent literature shows that accuracy remains high using phase-only measurements in distributed MIMO (D-MIMO). However, the impact of phase synchronization errors on such systems remains insufficiently explored. To address this gap, we first show that the proposed hyperbola intersection method achieves highly accurate positioning even in the presence of phase synchronization errors, when trained on appropriate data reflecting such impairments. We then introduce a deep learning (DL)-based D-MIMO antenna point (AP) selection framework that ensures high-precision localization under phase synchronization errors. Simulation results show that the proposed framework improves positioning accuracy compared to prior-art methods, while reducing inference complexity by approximately 19.7%.

eess.SP↗

Optimal Placement of Movable Antennas for Angle-of-Departure Estimation Under User Location Uncertainty

Movable antennas (MA) have gained significant attention in recent years to overcome the limitations of extremely large antenna arrays in terms of cost and power consumption. In this paper, we investigate the use of MA arrays at the base station (BS) for angle-of-departure (AoD) estimation under uncertainty in the user equipment (UE) location. Specifically, we (i) derive the theoretical performance limits through the Cramér-Rao bound (CRB) and (ii) optimize the antenna positions to ensure robust performance within the UE's uncertainty region. Numerical results show that dynamically optimizing antenna placement by explicitly considering the uncertainty region yields superior performance compared to fixed arrays, demonstrating the ability of MA systems to adapt and outperform conventional arrays.

eess.SP↗

Vehicular Wireless Positioning -- A Survey

The rapid advancement of connected and autonomous vehicles has driven a growing demand for precise and reliable positioning systems capable of operating in complex environments. Meeting these demands requires an integrated approach that combines multiple positioning technologies, including wireless-based systems, perception-based technologies, and motion-based sensors. This paper presents a comprehensive survey of wireless-based positioning for vehicular applications, with a focus on satellite-based positioning (such as global navigation satellite systems (GNSS) and low-Earth-orbit (LEO) satellites), cellular-based positioning (5G and beyond), and IEEE-based technologies (including Wi-Fi, ultrawideband (UWB), Bluetooth, and vehicle-to-vehicle (V2V) communications). First, the survey reviews a wide range of vehicular positioning use cases, outlining their specific performance requirements. Next, it explores the historical development, standardization, and evolution of each wireless positioning technology, providing an in-depth categorization of existing positioning solutions and algorithms, and identifying open challenges and contemporary trends. Finally, the paper examines sensor fusion techniques that integrate these wireless systems with onboard perception and motion sensors to enhance positioning accuracy and resilience in real-world conditions. This survey thus offers a holistic perspective on the historical foundations, current advancements, and future directions of wireless-based positioning for vehicular applications, addressing a critical gap in the literature.

eess.SP↗

6G OFDM Communications with High Mobility Transceivers and Scatterers via Angle-Domain Processing and Deep Learning

High-mobility communications, which are crucial for next-generation wireless systems, cause the orthogonal frequency division multiplexing (OFDM) waveform to suffer from strong intercarrier interference (ICI) due to the Doppler effect. In this work, we propose a novel receiver architecture for OFDM that leverages the angular domain to separate multipaths. A block-type pilot is sent to estimate direction-of-arrivals (DoAs), propagation delays, and channel gains of the multipaths. Subsequently, a decision-directed (DD) approach is employed to estimate and iteratively refine the Dopplers. Two different approaches are investigated to provide initial Doppler estimates: an error vector magnitude (EVM)-based method and a deep learning (DL)-based method. Simulation results reveal that the DL-based approach allows for constant bit error rate (BER) performance up to the maximum 6G speed of 1000 km/h.

eess.SP↗

Monostatic ISAC Without Full Buffers: Revisiting Spatial Trade-Offs Under Bursty Traffic

This work investigates the spatial trade-offs arising from the design of the transmit beamformer in a monostatic integrated sensing and communication (ISAC) base station (BS) under bursty traffic, a crucial aspect necessitated by the integration of communication and sensing functionalities in next-generation wireless systems. In this setting, the BS does not always have data available for transmission. This study compares different ISAC policies and reveals the presence of multiple effects influencing ISAC performance: signal-to-noise ratio (SNR) boosting of data-aided strategies compared to pilot-based ones, saturation of the probability of detection in data-aided strategies due to the non-full-buffer assumption, and, finally, directional masking of sensing targets due to the relative position between target and user. Simulation results demonstrate varying impact of these effects on ISAC trade-offs under different operating conditions, thus guiding the design of efficient ISAC transmission strategies.

eess.SP↗

Distributed Integrated Sensing, Localization, and Communications over LEO Satellite Constellations

Low Earth orbit (LEO) satellite constellations are rapidly becoming essential enablers of next-generation wireless systems, offering global broadband access, high-precision localization, and reliable sensing beyond terrestrial coverage. However, the inherent limitations of individual LEO satellites, including restricted power, limited antenna aperture, and constrained onboard processing, hinder their ability to meet the growing demands of 6G applications. To address these challenges, this article introduces the concept of distributed integrated sensing, localization, and communication (DISLAC) over LEO constellations, inspired by distributed multiple input multiple output architectures. By enabling inter-satellite cooperation through inter-satellite links, DISLAC jointly exploits communication, localization, and sensing functionalities, achieving synergistic gains in throughput, positioning accuracy, and sensing robustness through shared resources and cooperative design. We present illustrative case studies that quantify these benefits and analyze key system-level considerations, including synchronization, antenna reconfigurability, and inter-satellite link design. The article concludes by outlining open research directions to advance the practical deployment of DISLAC in future non-terrestrial networks.

eess.SP↗

Phase-Coherent D-MIMO ISAC: Multi-Target Estimation and Spectral Efficiency Trade-Offs

We investigate distributed multiple-input multiple-output (D-MIMO) integrated sensing and communication (ISAC) systems, in which multiple phase-synchronized access points (APs) jointly serve user equipments (UEs) while cooperatively detecting and estimating multiple static targets. To achieve high-accuracy multi-target estimation, we propose a two-stage sensing framework combining non-coherent and coherent maximum-likelihood (ML) estimation. In parallel, adaptive AP mode-selection strategies are introduced to balance communication and sensing performance: a communication-centric scheme that maximizes downlink spectral efficiency (SE) and a sensing-centric scheme that selects geometrically diverse receive APs to enhance sensing coverage. Simulation results confirm the SE-sensing trade-off, where appropriate power allocation between communication and sensing and larger array apertures alleviate performance degradation, achieving high SE with millimeter-level sensing precision. We further demonstrate that the proposed AP-selection strategy reveals an optimal number of receive APs that maximizes sensing coverage without significantly sacrificing SE.

eess.SP↗

Semantic Communication for Rate-Limited Closed-Loop Distributed Communication-Sensing-Control Systems

The growing integration of distributed integrated sensing and communication (ISAC) with closed-loop control in intelligent networks demands efficient information transmission under stringent bandwidth constraints. To address this challenge, this paper proposes a unified framework for goal-oriented semantic communication in distributed SCC systems. Building upon Weaver's three-level model, we establish a hierarchical semantic formulation with three error levels (L1: observation reconstruction, L2: state estimation, and L3: control) to jointly optimize their corresponding objectives. Based on this formulation, we propose a unified goal-oriented semantic compression and rate adaptation framework that is applicable to different semantic error levels and optimization goals across the SCC loop. A rate-limited multi-sensor LQR system is used as a case study to validate the proposed framework. We employ a GRU-based AE for semantic compression and a PPO-based rate adaptation algorithm that dynamically allocates transmission rates across sensors. Results show that the proposed framework effectively captures task-relevant semantics and adapts its resource allocation strategies across different semantic levels, thereby achieving level-specific performance gains under bandwidth constraints.

eess.SY↗

Observation Compression in Rate-Limited Closed-Loop Distributed ISAC Systems: From Signal Reconstruction to Control

In closed-loop distributed multi-sensor integrated sensing and communication (ISAC) systems, performance often hinges on transmitting high-dimensional sensor observations over rate-limited networks. In this paper, we first present a general framework for rate-limited closed-loop distributed ISAC systems, and then propose an autoencoder-based observation compression method to overcome the constraints imposed by limited transmission capacity. Building on this framework, we conduct a case study using a closed-loop linear quadratic regulator (LQR) system to analyze how the interplay among observation, compression, and state dimensions affects reconstruction accuracy, state estimation error, and control performance. In multi-sensor scenarios, our results further show that optimal resource allocation initially prioritizes low-noise sensors until the compression becomes lossless, after which resources are reallocated to high-noise sensors.

eess.SP↗

Sparse OFDM Design for Interference and Ambiguity Mitigation in Multi-Static ISAC

The sixth-generation (6G) wireless networks promises the integration of radar-like sensing capabilities into communication infrastructure. In this paper, we investigate a multi-static sensing framework where half-duplex base stations (BSs) are assigned as either transmitter or sensing receiver nodes. We propose a randomized sparse resource allocation scheme based on orthogonal frequency division multiplexing (OFDM) waveform design tailored for the multi-static scenario to simultaneously mitigate inter-BS interference (IBI) and sensing ambiguities. The waveform design also ensures robustness against inter-symbol interference (ISI) and intercarrier interference (ICI) via a judicious choice of subcarrier spacing according to the deployment of BSs. The potential ambiguity caused by sparse signaling is addressed through controlled irregularity in both time and frequency domains, with a negligible noise floor elevation. Simulation results demonstrate the effectiveness and resilience of the proposed design in the presence of multiple targets and clutter.

eess.SP↗

POLO: Phase-Only Localization in Uplink Distributed MIMO Systems

We propose a low-complexity localization framework for uplink distributed MIMO (D-MIMO) systems, targeting the challenge of minimizing the highly spiky maximum-likelihood (ML) cost function that arises in sparsely deployed phasecoherent access points (APs) with narrowband transmission. In such systems, ML-based localization typically relies on dense grid search, incurring prohibitive computational complexity. To address this, we introduce phase-only localization (POLO), an approach that leverages differential carrier-phase measurements from selected APs to generate a compact set of candidate user positions. The ML cost function is then evaluated only at these candidates, reducing complexity significantly. A key challenge is to devise an AP selection mechanism that reduces the number of candidate points while maintaining reliable coverage. We propose two variants: POLO-I, which selects three APs to provide closed-form candidate positions with low computational cost, and POLO-II, which selects four APs using an alternative strategy that enhances coverage at marginally higher runtime. Comprehensive analytical and simulation results show that POLO achieves a favorable coverage-complexity trade-off, reducing cost by orders of magnitude relative to exhaustive grid search with only marginal loss in coverage. By characterizing this tradeoff under diverse AP configurations, we also provide practical guidelines for selecting between POLO-I and POLO-II depending on latency and coverage requirements.

eess.SP↗

UNILocPro: Unified Localization Integrating Model-Based Geometry and Channel Charting

In this paper, we propose a unified localization framework (called UNILocPro) that integrates model-based localization and channel charting (CC) for mixed line-of-sight (LoS)/non-line-of-sight (NLoS) scenarios. Specifically, based on LoS/NLoS identification, an adaptive activation between the model-based and CC-based methods is conducted. Aiming for unsupervised learning, information obtained from the model-based method is utilized to train the CC model, where a pairwise distance loss (involving a new dissimilarity metric design), a triplet loss (if timestamps are available), a LoS-based loss, and an optimal transport (OT)-based loss are jointly employed such that the global geometry can be well preserved. To reduce the training complexity of UNILocPro, we propose a low-complexity implementation (called UNILoc), where the CC model is trained with self-generated labels produced by a single pre-training OT transformation, which avoids iterative Sinkhorn updates involved in the OT-based loss computation. Extensive numerical experiments demonstrate that the proposed unified frameworks achieve significantly improved positioning accuracy compared to both model-based and CC-based methods. Notably, UNILocPro with timestamps attains performance on par with fully-supervised fingerprinting despite operating without labelled training data. It is also shown that the low-complexity UNILoc can substantially reduce training complexity with only marginal performance degradation.

eess.SP↗

Pilot Distortion Design for ToA Obfuscation in Uplink OFDM Communication

We study uplink orthogonal frequency-division multiplexing (OFDM) pilot distortion to deliberately obfuscate time-of-arrival (ToA) estimation at a single base station while preserving communication performance. We design a complex per-subcarrier distortion vector that increases sidelobes of the mismatched ambiguity function (MAF) relative to its mainlobe, using two objectives: the sidelobe-to-peak level ratio and the integrated sidelobe level. The design is subject to a transmit-power budget and a proximity (dissimilarity) constraint around the communication-optimal pilot. Communication impact is quantied by a capacity-motivated lower bound obtained from the linear minimum mean-squared error error covariance with a mismatched channel estimate. The resulting generalized fractional program is solved with Dinkelbach's transform and a difference-of-convex update that yields a closed-form Karush-Kuhn-Tucker step. Simulations on a single-input single-output OFDM link show that the optimized distortions raise MAF sidelobes and degrade delay estimation, as validated by a mismatched maximum-likelihood ToA estimator, while incurring only marginal capacity loss over a broad signal-to-noise ratio range. The method requires no protocol changes or artificial path injection and provides a signal-level mechanism to control ToA observability under communication constraints.

eess.SP↗

Probabilistic Constellation Shaping for OFDM ISAC Signals Under Temporal-Frequency Filtering

Integrated sensing and communications (ISAC) is considered an innovative technology in sixth-generation (6G) wireless networks, where utilizing orthogonal frequency division multiplexing (OFDM) communication signals for sensing provides a cost-effective solution for implementing ISAC. However, the sensing performance of matched and mismatched filtering schemes can be significantly deteriorated due to the signaling randomness induced by finite-alphabet modulations with nonconstant modulus, such as quadrature amplitude modulation (QAM) constellations. Therefore, improving sensing performance without significantly compromising communication capability (i.e., maintaining randomness), remains a challenging task. To that end, we propose a unified probabilistic constellation shaping (PCS) framework that is compatible with both matched and mismatched filtering schemes, by maximizing the communication rate while imposing constraints on mean square error (MSE) of sensing channel state information (CSI), power, and probability distribution. Specifically, the MSE of sensing CSI is leveraged to optimize sensing capability, which is illustrated to be a more comprehensive metric compared to the output SNR after filtering (SNRout) and integrated sidelobes ratio (ISLR). Additionally, the internal relationships among these three sensing metrics are explicitly analyzed. Finally, both simulations and field measurements validate the efficiency of proposed PCS approach in achieving a flexible S&C trade-off, as well as its credibility in enhancing 6G wireless transmission in real-world scenarios.

eess.SP↗

Integrating Phase-Coherent Multistatic Imaging in Downlink D-MIMO Networks

This paper addresses the challenge of integrating multistatic coherent imaging functionalities in the downlink (DL) of a phase-coherent distributed multiple input multiple output (D-MIMO) communication network. During DL, the D-MIMO access points (APs) jointly precode the transmitted signals to maximize the spectral efficiency (SE) at the users (UEs) locations. However, imaging requires that \textit{(i)} a fraction of the APs work as receivers for sensing and \textit{(ii)} the transmitting APs emit AP-specific and orthogonal signals to illuminate the area to be imaged and allow multistatic operation. In these settings, our contribution is twofold. We propose a novel distributed integrated sensing and communication (D-ISAC) system that superposes a purposely designed AP-specific signal for imaging to the legacy UE-specific communication one, with a tunable trade-off factor. We detail both the imaging waveform design according to the \textit{extended orthogonality condition} and the space-frequency precoder design. Then, we propose an optimized selection strategy for the receiving APs, in order to maximize imaging performance under half-duplex constraints. Extensive numerical results prove the feasibility and benefits of our proposal, materializing the potential of joint multistatic imaging and communications in practical D-MIMO deployments.

eess.SP↗

Frugal RIS-aided 3D Localization with CFO under LoS and NLoS Conditions

In this paper, we investigate 3-D localization and frequency synchronization with multiple reconfigurable intelligent surfaces (RISs) in the presence of carrier frequency offset (CFO) for a stationary user equipment (UE). In line with the 6G goals of sustainability and efficiency, we focus on a frugal communication scenario with minimal spatial and spectral resources (i.e., narrowband single-input single-ouput system), considering both the presence and blockage of the line-of-sight (LoS) path between the base station (BS) and the UE. We design a generalized likelihood ratio test (GLRT)-based LoS detector, channel parameter estimation and localization algorithms, with varying complexity. To verify the efficiency of our estimators, we compare the root mean-squared error (RMSE) to the Cramér- Rao bound (CRB) of the unknown parameters. We also evaluate the sensitivity of our algorithms to the presence of uncontrolled multi-path components (MPC) and various levels of CFO. Simulation results showcase the effectiveness of the proposed algorithms under minimal hardware and spectral requirements, and a wide range of operating conditions, thereby confirming the viability of RIS-aided frugal localization in 6G scenarios.

eess.SP↗

Integrated Cellular and LEO-based Positioning and Synchronization under User Mobility

This paper investigates the localization, synchronization, and speed estimation of a mobile user equipment (UE) leveraging integrated terrestrial and non-terrestrial networks (NTNs), in particular low Earth orbit (LEO) satellites. We focus on a minimal setup in which the UE received signal from only one base station (BS) and one LEO satellite. We derive a generic signal model accounting for mobility, clock and frequency offsets, based on which a hierarchy of simplified models are proposed and organized by computational complexity. Estimation algorithms are developed for each model to facilitate efficient and accurate parameter recovery. Rigorous simulations validate the effectiveness of the proposed models, demonstrating their suitability across diverse scenarios. The findings highlight how the trade-off between complexity and performance can be optimized for varying deployment environments and application requirements, offering valuable insights for 6G positioning and synchronization systems under user mobility.

eess.SP↗