arXiv subjects

Musa Furkan Keskin

Publications and source records attributed to Musa Furkan Keskin.

At least 55 records · Page 3Linked to original sources

arXiv2025

Joint Design of Radar Receive Filter and Unimodular ISAC Waveform with Sidelobe Level Control

Integrated sensing and communication (ISAC) has been considered a key feature of next-generation wireless networks. This paper investigates the joint design of the radar receive filter and dual-functional transmit waveform for the multiple-input multiple-output (MIMO) ISAC system. While optimizing the mean square error (MSE) of the radar receive spatial response and maximizing the achievable rate at the communication receiver, besides the constraints of full-power radar receiving filter and unimodular transmit sequence, we control the maximum range sidelobe level, which is often overlooked in existing ISAC waveform design literature, for better radar imaging performance. To solve the formulated optimization problem with convex and nonconvex constraints, we propose an inexact augmented Lagrangian method (ALM) algorithm. For each subproblem in the proposed inexact ALM algorithm, we custom-design a block successive upper-bound minimization (BSUM) scheme with closed-form solutions for all blocks of variable to enhance the computational efficiency. Convergence analysis shows that the proposed algorithm is guaranteed to provide a stationary and feasible solution. Extensive simulations are performed to investigate the impact of different system parameters on communication and radar imaging performance. Comparison with the existing works shows the superiority of the proposed algorithm.

eess.SP↗

arXiv2025

Sensing with Mobile Devices through Radio SLAM: Models, Methods, Opportunities, and Challenges

The integration of sensing and communication (ISAC) is a cornerstone of 6G, enabling simultaneous environmental awareness and communication. This paper explores radio SLAM (simultaneous localization and mapping) as a key ISAC approach, using radio signals for mapping and localization. We analyze radio SLAM across different frequency bands, discussing trade-offs in coverage, resolution, and hardware requirements. We also highlight opportunities for integration with sensing, positioning, and cooperative networks. The findings pave the way for standardized solutions in 6G applications such as autonomous systems and industrial robotics.

eess.SP↗

arXiv2025

UNILoc: Unified Localization Combining Model-Based Geometry and Unsupervised Learning

Accurate mobile device localization is critical for emerging 5G/6G applications such as autonomous vehicles and augmented reality. In this paper, we propose a unified localization method that integrates model-based and machine learning (ML)-based methods to reap their respective advantages by exploiting available map information. In order to avoid supervised learning, we generate training labels automatically via optimal transport (OT) by fusing geometric estimates with building layouts. Ray-tracing based simulations are carried out to demonstrate that the proposed method significantly improves positioning accuracy for both line-of-sight (LoS) users (compared to ML-based methods) and non-line-of-sight (NLoS) users (compared to model-based methods). Remarkably, the unified method is able to achieve competitive overall performance with the fully-supervised fingerprinting, while eliminating the need for cumbersome labeled data measurement and collection.

eess.SP↗

arXiv2025

RIS-Enabled NLoS Near-Field Joint Position and Velocity Estimation under User Mobility

In the context of single-base station (BS) non-line-of-sight (NLoS) single-epoch localization with the aid of a reflective reconfigurable intelligent surface (RIS), this paper introduces a novel three-step algorithm that jointly estimates the position and velocity of a mobile user equipment (UE), while compensating for the Doppler effects observed in near-field (NF) at the RIS elements over the short transmission duration of a sequence of downlink (DL) pilot symbols. First, a low-complexity initialization procedure is proposed, relying in part on far-field (FF) approximation and a static user assumption. Then, an alternating optimization procedure is designed to iteratively refine the velocity and position estimates, as well as the channel gain. The refinement routines leverage small angle approximations and the linearization of the RIS response, accounting for both NF and mobility effects. We evaluate the performance of the proposed algorithm through extensive simulations under diverse operating conditions with regard to signal-to-noise ratio (SNR), UE mobility, uncontrolled multipath and RIS-UE distance. Our results reveal remarkable performance improvements over the state-of-the-art (SoTA) mobility-agnostic benchmark algorithm, while indicating convergence of the proposed algorithm to respective theoretical bounds on position and velocity estimation.

eess.SP↗

arXiv2025

Hybrid Codebook Design for Localization Using Electromagnetically Reconfigurable Fluid Antenna System

Electromagnetically reconfigurable fluid antenna systems (ER-FAS) introduce additional degrees of freedom in the electromagnetic (EM) domain by dynamically steering per-antenna radiation patterns, thereby enhancing power efficiency in wireless links. Unlike prior works on spatially reconfigurable FAS, which adjust element positions, ER-FAS provides direct control over each element's EM characteristics to realize on-demand beam-pattern shaping. While existing studies have exploited ER-FAS to boost spectral efficiency, this paper explores its application for downlink localization. We consider a multiple-input single-output (MISO) system in which a multi-antenna ER-FAS at the base station serves a single-antenna user equipment (UE). We consider two reconfigurability paradigms: (i) a synthesis model where each antenna generates desired beampatterns from a finite set of EM basis functions, and (ii) a finite-state selection model in which each antenna selects a pattern from a predefined set of patterns. For both paradigms, we formulate the joint baseband (BB) and EM precoder design to minimize the UE position error bound. In the synthesis case we derive low-dimensional closed-form expressions for both the BB and EM precoders. For the finite-state model we obtain closed-form BB structures and propose a low-complexity block-coordinate-descent algorithm for EM pattern selection. Analytical bounds and extensive simulations show that the proposed hybrid designs for ER-FAS substantially improve UE positioning accuracy over traditional non-reconfigurable arrays.

eess.SP↗

arXiv2025

Cross-layer Integrated Sensing and Communication: A Joint Industrial and Academic Perspective

Integrated sensing and communication (ISAC) enables radio systems to simultaneously sense and communicate with their environment. This paper, developed within the Hexa-X-II project funded by the European Union, presents a comprehensive cross-layer vision for ISAC in 6G networks, integrating insights from physical-layer design, hardware architectures, AI-driven intelligence, and protocol-level innovations. We begin by revisiting the foundational principles of ISAC, highlighting synergies and trade-offs between sensing and communication across different integration levels. Enabling technologies (such as multiband operation, massive and distributed MIMO, non-terrestrial networks, reconfigurable intelligent surfaces, and machine learning) are analyzed in conjunction with hardware considerations including waveform design, synchronization, and full-duplex operation. To bridge implementation and system-level evaluation, we introduce a quantitative cross-layer framework linking design parameters to key performance and value indicators. By synthesizing perspectives from both academia and industry, this paper outlines how deeply integrated ISAC can transform 6G into a programmable and context-aware platform supporting applications from reliable wireless access to autonomous mobility and digital twinning.

eess.SP↗

arXiv2025

Uplink Cell-Free Massive MIMO OFDM with Phase Noise-Aware Channel Estimation: Separate and Shared Local Oscillators

Cell-free massive multiple-input multiple-output (mMIMO) networks enhance coverage and spectral efficiency (SE) by distributing antennas across access points (APs) with phase coherence between APs. However, the use of cost-efficient local oscillators (LOs) introduces phase noise (PN) that compromises phase coherence, even with centralized processing. Sharing an LO across APs can reduce costs in specific configurations but cause correlated PN between APs, leading to correlated interference that affects centralized combining. This can be improved by exploiting the PN correlation in channel estimation. This paper presents an uplink orthogonal frequency division multiplexing (OFDM) signal model for PN-impaired cell-free mMIMO, addressing gaps in single-carrier signal models. We evaluate mismatches from applying single-carrier methods to OFDM systems, showing how they underestimate the impact of PN and produce over-optimistic achievable SE predictions. Based on our OFDM signal model, we propose two PN-aware channel and common phase error estimators: a distributed estimator for uncorrelated PN with separate LOs and a centralized estimator with shared LOs. We introduce a deep learning-based channel estimator to enhance the performance and reduce the number of iterations of the centralized estimator. The simulation results show that the distributed estimator outperforms mismatched estimators with separate LOs, whereas the centralized estimator enhances distributed estimators with shared LOs.

eess.SP↗

arXiv2025

Near-Field RIS-Assisted Localization Under Mutual Coupling

Reconfigurable intelligent surfaces (RISs) have the potential to significantly enhance the performance of integrated sensing and communication (ISAC) systems, particularly in line-of-sight (LoS) blockage scenarios. However, as larger RISs are integrated into ISAC systems, mutual coupling (MC) effects between RIS elements become more pronounced, leading to a substantial degradation in performance, especially for localization applications. In this paper, we first conduct a misspecified and standard Cramér-Rao bound analysis to quantify the impact of MC on localization performance, demonstrating severe degradations in accuracy, especially when MC is ignored. Building on this, we propose a novel joint user equipment localization and RIS MC parameter estimation (JLMC) method in near-field wireless systems. Our two-stage MC-aware approach outperforms classical methods that neglect MC, significantly improving localization accuracy and overall system performance. Simulation results validate the effectiveness and advantages of the proposed method in realistic scenarios.

eess.SP↗

arXiv2025

Pilot-Based End-to-End Radio Positioning and Mapping for ISAC: Beyond Point-Based Landmarks

Integrated sensing and communication enables simultaneous communication and sensing tasks, including precise radio positioning and mapping, essential for future 6G networks. Current methods typically model environmental landmarks as isolated incidence points or small reflection areas, lacking detailed attributes essential for advanced environmental interpretation. This paper addresses these limitations by developing an end-to-end cooperative uplink framework involving multiple base stations and users. Our method uniquely estimates extended landmark objects and incorporates obstruction-based outlier removal to mitigate multi-bounce signal effects. Validation using realistic ray-tracing data demonstrates substantial improvements in the richness of the estimated environmental map.

eess.SP↗

arXiv2025

Bridging the Gap via Data-Aided Sensing: Can Bistatic ISAC Converge to Genie Performance?

We investigate data-aided iterative sensing in bistatic OFDM ISAC systems, focusing on scenarios with co-located sensing and communication receivers. To enhance target detection beyond pilot-only sensing methods, we propose a multi-stage bistatic OFDM receiver, performing iterative sensing and data demodulation to progressively refine ISAC channel and data estimates. Simulation results demonstrate that the proposed data-aided scheme significantly outperforms pilot-only benchmarks, particularly in multi-target scenarios, substantially narrowing the performance gap compared to a genie-aided system with perfect data knowledge. Moreover, the proposed approach considerably expands the bistatic ISAC trade-off region, closely approaching the probability of detection-achievable rate boundary established by its genie-aided counterpart.

eess.SP↗

arXiv2025

Joint Localization and Synchronization in Downlink Distributed MIMO

We investigate joint localization and synchronization in the downlink of a distributed multiple-input-multiple-output (D-MIMO) system, aiming to estimate the position and phase offset of a single-antenna user equipment (UE) using downlink transmissions of multiple phase-synchronized, multi-antenna access points (APs). We propose two transmission protocols: sequential (P1) and simultaneous (P2) AP transmissions, together with the ML estimators that either leverage (coherent estimator) or disregard phase information (non-coherent estimator). Simulation results reveal that downlink D-MIMO holds significant potential for high-accuracy localization while showing that P2 provides superior localization performance and reduced transmission latency.

eess.SP↗

arXiv2025

Optimized Vehicular Antenna Placement for Phase-Coherent Positioning

Distributed multi-antenna systems are an important enabling technology for future intelligent transportation systems (ITS), showing promising performance in vehicular communications and near-field (NF) localization applications. This work investigates optimal deployments of phase-coherent sub-arrays on a vehicle for NF localization in terms of a Cramér-Rao lower bound (CRLB)-based metric. Sub-array placements consider practical geometrical constraints on a three-dimensional vehicle model accounting for self-occlusions. Results show that, for coherent NF localization of the vehicle, the aperture spanned by the sub-arrays should be maximized and a larger number of sub-arrays results in more even coverage over the vehicle orientations under a fixed total number of antenna elements, contrasting with the outcomes of incoherent localization. Moreover, while coherent NF processing significantly enhances accuracy, it also leads to more intricate cost functions, necessitating computationally more complex algorithms than incoherent processing.

eess.SP↗

arXiv2025

RIS-Enabled Self-Localization with FMCW Radar

In the upcoming vehicular networks, reconfigurable intelligent surfaces (RISs) are considered as a key enabler of user self-localization without the intervention of the access points (APs). In this paper, we investigate the feasibility of RIS-enabled self-localization with no APs. We first develop a digital signal processing (DSP) unit for estimating the geometric parameters such as the angle, distance, and velocity and for RIS-enabled self-localization. Second, we set up an experimental testbed consisting of a Texas Instrument frequency modulated continuous wave (FMCW) radar for the user and SilversIMA module for the RIS. Our results confirm the validity of the developed DSP unit and demonstrate the feasibility of RIS-enabled self-localization.

eess.SP↗

arXiv2025

Privacy Preservation in MIMO-OFDM Localization Systems: A Beamforming Approach

We investigate an uplink MIMO-OFDM localization scenario where a legitimate base station (BS) aims to localize a user equipment (UE) using pilot signals transmitted by the UE, while an unauthorized BS attempts to localize the UE by eavesdropping on these pilots, posing a risk to the UE's location privacy. To enhance legitimate localization performance while protecting the UE's privacy, we formulate an optimization problem regarding the beamformers at the UE, aiming to minimize the Cramér-Rao bound (CRB) for legitimate localization while constraining the CRB for unauthorized localization above a threshold. A penalty dual decomposition optimization framework is employed to solve the problem, leading to a novel beamforming approach for location privacy preservation. Numerical results confirm the effectiveness of the proposed approach and demonstrate its superiority over existing benchmarks.

eess.SP↗

arXiv2025

Joint Near-Field Sensing and Visibility Region Detection with Extremely Large Aperture Arrays

In this paper, we consider near-field localization and sensing with an extremely large aperture array under partial blockage of array antennas, where spherical wavefront and spatial non-stationarity are accounted for. We propose an Ising model to characterize the clustered sparsity feature of the blockage pattern, develop an algorithm based on alternating optimization for joint channel parameter estimation and visibility region detection, and further estimate the locations of the user and environmental scatterers. The simulation results confirm the effectiveness of the proposed algorithm compared to conventional methods.

eess.SP↗

arXiv2025

Integrated 6G TN and NTN Localization: Challenges, Opportunities, and Advancements

The rapid evolution of cellular networks has introduced groundbreaking technologies, including large and distributed antenna arrays and reconfigurable intelligent surfaces in terrestrial networks (TNs), as well as aerial and space-based nodes in non-terrestrial networks (NTNs). These advancements enable applications beyond traditional communication, such as high-precision localization and sensing. While integrating TN and NTN enablers will lead to unparalleled opportunities for seamless global localization, such integration attempts are expected to face several challenges. To understand these opportunities and challenges, we first examine the distinctive characteristics of the key 6G enablers, evaluating their roles in localization from both technical and practical perspectives. Next, to identify developments driving TN-NTN localization, we review the latest standardization and industrial innovation progress. Finally, we discuss the opportunities and challenges of TN-NTN integration, illustrating its potential through two numerical case studies.

eess.SP↗

arXiv2025

Location and Map-Assisted Wideband Phase and Time Calibration Between Distributed Antennas

Distributed massive multiple-input multiple-output networks utilize a large number of distributed access points (APs) to serve multiple user equipments (UEs), offering significant potential for both communication and localization. However, these networks require frequent phase and time calibration between distributed antennas due to oscillator phase drifts, crucial for reciprocity-based coherent beamforming and accurate localization. While this calibration is typically performed through bi-directional measurements between antennas, it can be simplified to unidirectional measurement under perfect knowledge of antenna locations. This paper extends a recent phase calibration narrowband line-of-sight (LoS) model to a phase and time calibration wideband orthogonal frequency division multiplexing model, including both LoS and reflection paths and allowing for joint phase and time calibrations. We explore different scenarios, considering whether or not prior knowledge of antenna locations and the map is available. For each case, we introduce a practical maximum likelihood estimator and conduct Cramer-Rao lower bound (CRLB) analyses to benchmark performance. Simulations validate our estimators against the CRLB in these scenarios.

eess.SP↗

arXiv2025

OFDM-based JCAS under Attack: The Dual Threat of Spoofing and Jamming in WLAN Sensing

This study reveals the vulnerabilities of Wireless Local Area Networks (WLAN) sensing, under the scope of joint communication and sensing (JCAS), focusing on target spoofing and deceptive jamming techniques. We use orthogonal frequency-division multiplexing (OFDM) to explore how adversaries can exploit WLAN's sensing capabilities to inject false targets and disrupt normal operations. Unlike traditional methods that require sophisticated digital radio-frequency memory hardware, we demonstrate that much simpler software-defined radios can effectively serve as deceptive jammers in WLAN settings. Through comprehensive modeling and practical experiments, we show how deceptive jammers can manipulate the range-Doppler map (RDM) by altering signal integrity, thereby posing significant security threats to OFDM-based JCAS systems. Our findings comprehensively evaluate jammer impact on RDMs and propose several jamming strategies that vary in complexity and detectability.

cs.CR↗