arXiv subjects

Musa Furkan Keskin

Publications and source records attributed to Musa Furkan Keskin.

At least 91 records · Page 5Linked to original sources

arXiv2024

Enhancing Sensing-Assisted Communications in Cluttered Indoor Environments through Background Subtraction

Integrated sensing and communications (ISAC) is poised to be a native technology for the forthcoming Sixth Generation (6G) era, with an emphasis on its potential to enhance communications performance through the integration of sensing information, i.e., sensing-assisted communications (SAC). Nevertheless, existing research on SAC has predominantly confined its focus to scenarios characterized by minimal clutter and obstructions, largely neglecting indoor environments, particularly those in industrial settings, where propagation channels involve high clutter density. To address this research gap, background subtraction is proposed on the monostatic sensing echoes, which effectively addresses clutter removal and facilitates detection and tracking of user equipments (UEs) in cluttered indoor environments with SAC. A realistic evaluation of the introduced SAC strategy is provided, using ray tracing (RT) data with the scenario layout following Third Generation Partnership Project (3GPP) indoor factory (InF) channel models. Simulation results show that the proposed approach enables precise predictive beamforming largely unaffected by clutter echoes, leading to significant improvements in effective data rate over the existing SAC benchmarks and exhibiting performance very close to the ideal case where perfect knowledge of UE location is available.

eess.SP↗

arXiv2024

Deceptive Jamming in WLAN Sensing

Joint Communication and Sensing (JCAS) is taking its first shape in WLAN sensing under IEEE 802.11bf, where standardized WLAN signals and protocols are exploited to enable radar-like sensing. However, an overlooked problem in JCAS, and specifically in WLAN Sensing, is the sensitivity of the system to a deceptive jammer, which introduces phantom targets to mislead the victim radar receiver. Standardized waveforms and sensing parameters make the system vulnerable to physical layer attacks. Moreover, orthogonal frequency-division multiplexing (OFDM) makes deceptive jamming even easier as it allows digitally generated artificial range/Doppler maps. This paper studies deceptive jamming in JCAS, with a special focus on WLAN Sensing. The provided mathematical models give insights into how to design jamming signals and their impact on the sensing system. Numerical analyses illustrate various distortions caused by deceptive jamming, while the experimental results validate the need for meticulous JCAS design to protect the system against physical layer attacks in the form of deceptive jamming.

eess.SP↗

arXiv2023

Modeling and Analysis of OFDM-based 5G/6G Localization under Hardware Impairments

Localization is envisioned as a key enabler to satisfy the requirements of communication and context-aware services in the fifth/sixth generation (5G/6G) communication systems. User localization can be achieved based on delay and angle estimation using uplink/downlink pilot signals. However, hardware impairments (HWIs) (such as phase noise and mutual coupling) distort the signals at both the transmitter and receiver sides and thus affect the localization performance. While this impact can be ignored at lower frequencies with less severe HWIs, and less stringent localization requirements, modeling and analysis efforts are needed for high-frequency bands to assess degradation in localization accuracy due to HWIs. In this work, we model various types of impairments for a mmWave multiple-input-multiple-output communication system and conduct a misspecified Cramér-Rao bound analysis to evaluate HWI-induced performance losses in terms of angle/delay estimation and the resulting 3D position/orientation estimation error. We also investigate the effect of individual and overall HWIs on communication in terms of symbol error rate (SER). Our extensive simulation results demonstrate that each type of HWI leads to a different level of degradation in angle and delay estimation performance, and the prominent impairment factors on delay estimation will have a dominant negative effect on SER.

eess.SP↗

arXiv2023

6G Localization and Sensing in the Near Field: Features, Opportunities, and Challenges

The far-field channel model has historically been used in wireless communications due to the simplicity of mathematical modeling and convenience for algorithm design. With the need for high data rates, low latency, and ubiquitous connectivity in the sixth generation (6G) of communication systems, new technology enablers such as extremely large antenna arrays (ELAAs), reconfigurable intelligent surfaces (RISs), and distributed multiple-input-multiple-output (D-MIMO) systems will be adopted. These enablers not only aim to improve communication services but also have an impact on localization and sensing (L&S), which are expected to be fundamentally built-in functionalities in future wireless systems. Despite appearing in different scenarios and supporting different frequency bands, such enablers share the so-called near-field (NF) features, which will provide extra geometric information conducive to L&S. In this work, we describe the NF features, namely, the spherical wave model, spatial non-stationarity, and beam squint effect. After discussing how L&S see NF differently from communication, the opportunities and open research challenges are provided.

cs.IT↗

arXiv2023

Multi-RIS-Enabled 3D Sidelink Positioning

Positioning is expected to be a core function in intelligent transportation systems (ITSs) to support communication and location-based services, such as autonomous driving, traffic control, etc. With the advent of low-cost reflective reconfigurable intelligent surfaces (RISs) to be deployed in beyond 5G/6G networks, extra anchors with high angular resolutions can boost signal quality and makes high-precision positioning with extended coverage possible in ITS scenarios. However, the passive nature of the RIS requires a signal source such as a base station (BS), which limits the positioning service in extreme situations, such as tunnels or dense urban areas, where 5G/6G BSs are not accessible. In this work, we show that with the assistance of (at least) two RISs and sidelink communication between two user equipments (UEs), these UEs can be localized even without any BSs involvement. A two-stage 3D sidelink positioning algorithm is proposed, benchmarked by the derived Cramér-Rao bounds. The effects of multipath and RIS profile designs on positioning performance are evaluated, and several scenarios with different RIS and UE locations are discussed for localizability analysis. Simulation results demonstrate the promising positioning accuracy of the proposed BS-free sidelink communication system in challenging ITS scenarios. Additionally, we propose and evaluate several solutions to eliminate potential blind areas where positioning performance is poor, such as removing clock offset via round-trip communication, adding geometrical prior or constraints, as well as introducing more RISs.

eess.SP↗

arXiv2023

V2X Sidelink Positioning in FR1: Scenarios, Algorithms, and Performance Evaluation

In this paper, we investigate sub-6 GHz V2X sidelink positioning scenarios in 5G vehicular networks through a comprehensive end-to-end methodology encompassing ray-tracing-based channel modeling, novel theoretical performance bounds, high-resolution channel parameter estimation, and geometric positioning using a round-trip-time (RTT) protocol. We first derive a novel, approximate Cramér-Rao bound (CRB) on the connected road user (CRU) position, explicitly taking into account multipath interference, path merging, and the RTT protocol. Capitalizing on tensor decomposition and ESPRIT methods, we propose high-resolution channel parameter estimation algorithms specifically tailored to dense multipath V2X sidelink environments, designed to detect multipath components (MPCs) and extract line-of-sight (LoS) parameters. Finally, using realistic ray-tracing data and antenna patterns, comprehensive simulations are conducted to evaluate channel estimation and positioning performance, indicating that sub-meter accuracy can be achieved in sub-6 GHz V2X with the proposed algorithms.

eess.SP↗

arXiv2023

Integrated Sensing and Communications with MIMO-OTFS

Orthogonal time frequency space (OTFS) is a promising alternative to orthogonal frequency division multiplexing (OFDM) for high-mobility communications. We propose a novel multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system based on OTFS modulation. We begin by deriving new sensing and communication signal models for the proposed MIMO-OTFS ISAC system that explicitly capture inter-symbol interference (ISI) and inter-carrier interference (ICI) effects. We then develop a generalized likelihood ratio test (GLRT) based multi-target detection and delay-Doppler-angle estimation algorithm for MIMO-OTFS radar sensing that can simultaneously mitigate and exploit ISI/ICI effects, to prevent target masking and surpass standard unambiguous detection limits in range/velocity. Moreover, considering two operational modes (search/track), we propose an adaptive MIMO-OTFS ISAC transmission strategy. For the search mode, we introduce the concept of delay-Doppler (DD) multiplexing, enabling omnidirectional probing of the environment and large virtual array at the OTFS radar receiver. For the track mode, we pursue a directional transmission approach and design an OTFS ISAC optimization algorithm in spatial and DD domains, seeking the optimal trade-off between radar signal-to-noise ratio (SNR) and achievable rate. Simulation results verify the effectiveness of the proposed sensing algorithm and reveal valuable insights into OTFS ISAC trade-offs under varying communication channel characteristics.

eess.SP↗

arXiv2023

Performance of RIS-Aided Nearfield Localization under Beams Approximation from Real Hardware Characterization

The technology of reconfigurable intelligent surfaces (RIS) has been showing promising potential in a variety of applications relying on Beyond-5G networks. Reconfigurable intelligent surface (RIS) can indeed provide fine channel flexibility to improve communication quality of service (QoS) or restore localization capabilities in challenging operating conditions, while conventional approaches fail (e.g., due to insufficient infrastructure, severe radio obstructions). In this paper, we tackle a general low-complexity approach for optimizing the precoders that control such reflective surfaces under hardware constraints. More specifically, it allows the approximation of any desired beam pattern using a pre-characterized look-up table of feasible complex reflection coefficients for each RIS element. The proposed method is first evaluated in terms of beam fidelity for several examples of RIS hardware prototypes. Then, by means of a theoretical bounds analysis, we examine the impact of RIS beams approximation on the performance of near-field downlink positioning in non-line-of-sight conditions, while considering several RIS phase profiles (incl. directional, random and localization-optimal designs). Simulation results in a canonical scenario illustrate how the introduced RIS profile optimization scheme can reliably produce the desired RIS beams under realistic hardware limitations. They also highlight its sensitivity to both the underlying hardware characteristics and the required beam kinds in relation to the specificity of RIS-aided localization applications.

eess.SP↗

arXiv2023

Uplink Joint Positioning and Synchronization in Cell-Free Deployments with Radio Stripes

Radio stripes (RSs) is an emerging technology in beyond 5G and 6G wireless networks to support the deployment of cell-free architectures. In this paper, we investigate the potential use of RSs to enable joint positioning and synchronization in the uplink channel at sub-6 GHz bands. The considered scenario consists of a single-antenna user equipment (UE) that communicates with a network of multiple-antenna RSs distributed over a wide area. The UE is assumed to be unsynchronized to the RSs network, while individual RSs are time- and phase-synchronized. We formulate the problem of joint estimation of position, clock offset, and phase offset of the UE and derive the corresponding maximum-likelihood (ML) estimator, both with and without exploiting carrier phase information. To gain fundamental insights into the achievable performance, we also conduct a Fisher information analysis and inspect the theoretical lower bounds numerically. Simulation results demonstrate that promising positioning and synchronization performance can be obtained in cell-free architectures supported by RSs, revealing at the same time the benefits of carrier phase exploitation through phase-synchronized RSs.

eess.SP↗

arXiv2023

ESPRIT-Oriented Precoder Design for mmWave Channel Estimation

We consider the problem of ESPRIT-oriented precoder design for beamspace angle-of-departure (AoD) estimation in downlink mmWave multiple-input single-output communications. Standard precoders (i.e., directional/sum beams) yield poor performance in AoD estimation, while Cramer-Rao bound-optimized precoders undermine the so-called shift invariance property (SIP) of ESPRIT. To tackle this issue, the problem of designing ESPRIT-oriented precoders is formulated to jointly optimize over the precoding matrix and the SIP-restoring matrix of ESPRIT. We develop an alternating optimization approach that updates these two matrices under unit-modulus constraints for analog beamforming architectures. Simulation results demonstrate the validity of the proposed approach while providing valuable insights on the beampatterns of the ESPRIT-oriented precoders.

eess.SP↗

arXiv2022

Model-Driven End-to-End Learning for Integrated Sensing and Communication

Integrated sensing and communication (ISAC) is envisioned to be one of the pillars of 6G. However, 6G is also expected to be severely affected by hardware impairments. Under such impairments, standard model-based approaches might fail if they do not capture the underlying reality. To this end, data-driven methods are an alternative to deal with cases where imperfections cannot be easily modeled. In this paper, we propose a model-driven learning architecture for joint single-target multi-input multi-output (MIMO) sensing and multi-input single-output (MISO) communication. We compare it with a standard neural network approach under complexity constraints. Results show that under hardware impairments, both learning methods yield better results than the model-based standard baseline. If complexity constraints are further introduced, model-driven learning outperforms the neural-network-based approach. Model-driven learning also shows better generalization performance for new unseen testing scenarios.

eess.SP↗

arXiv2022

RIS-Enabled and Access-Point-Free Simultaneous Radio Localization and Mapping

In the upcoming sixth generation (6G) of wireless communication systems, reconfigurable intelligent surfaces~(RISs) are regarded as one of the promising technological enablers, which can provide programmable signal propagation. Therefore, simultaneous radio localization and mapping(SLAM) with RISs appears as an emerging research direction within the 6G ecosystem. In this paper, we propose a novel framework of RIS-enabled radio SLAM for wireless operation without the intervention of access points (APs). We first design the RIS phase profiles leveraging prior information for the user equipment~(UE), such that they uniformly illuminate the angular sector where the UE is probabilistically located. Second, we modify the marginal Poisson multi-Bernoulli SLAM filter and estimate the UE state and landmarks, which enables efficient mapping of the radio propagation environment. Third, we derive the theoretical Cramér-Rao lower bounds on the estimators for the channel parameters and the UE state. We finally evaluate the performance of the proposed method under scenarios with a limited number of transmissions, taking into account the channel coherence time. Our results demonstrate that the RIS enables solving the radio SLAM problem with zero APs, and that the consideration of the Doppler shift contributes to improving the UE speed estimates.

eess.SP↗

arXiv2022

Spatial Signal Design for Positioning via End-to-End Learning

This letter considers the problem of end-to-end learning for joint optimization of transmitter precoding and receiver processing for mmWave downlink positioning. Considering a multiple-input single-output (MISO) scenario, we propose a novel autoencoder (AE) architecture to estimate user-equipment(UE) position with multiple base-stations (BSs) and demonstrate that end-to-end learning can match model-based design, both for angle of departure (AoD) and position estimation, under ideal conditions without model deficits and outperform it in the presence of hardware impairments.

eess.SP↗

arXiv2022

On the Impact of Phase Noise on Monostatic Sensing in OFDM ISAC Systems

Phase noise (PN) can become a major bottleneck for integrated sensing and communications (ISAC) systems towards 6G wireless networks. In this paper, we consider an OFDM ISAC system with oscillator imperfections and investigate the impact of PN on monostatic sensing performance by performing a misspecified Cramér-Rao bound (MCRB) analysis. Simulations are carried out under a wide variety of operating conditions with regard to SNR, oscillator type (free-running oscillators (FROs) and phase-locked loops (PLLs)), 3-dB bandwidth of the oscillator spectrum, PLL loop bandwidth and target range. The results provide valuable insights on when PN leads to a significant degradation in range and/or velocity accuracy, establishing important guidelines for hardware and algorithm design in 6G ISAC systems.

eess.SP↗

arXiv2022

RIS-Enabled SISO Localization under User Mobility and Spatial-Wideband Effects

Reconfigurable intelligent surface (RIS) is a promising technological enabler for the 6th generation (6G) of wireless systems with applications in localization and communication. In this paper, we consider the problem of positioning a single-antenna user in 3D space based on the received signal from a single-antenna base station and reflected signal from an RIS by taking into account the mobility of the user and spatial-wideband (WB) effects. To do so, we first derive the spatial-WB channel model under the far-field assumption, for orthogonal frequency-division multiplexing signal transmission with the user having a constant velocity. We derive the Cramer Rao bounds to serve as a benchmark. Furthermore, we devise a low-complexity estimator that attains the bounds in high signal-to-noise ratios. Our estimator neglects the spatial-WB effects and deals with the user mobility by estimating the radial velocities and compensating for their effects in an iterative fashion. We show that the spatial-WB effects can degrade the localization accuracy for large RIS sizes and large signal bandwidths as the direction of arrival or departure deviate from the RIS normal. In particular, for a 64X64 RIS, the proposed estimator is resilient against the spatial-WB effects up to 140 MHz bandwidth. Regarding user mobility, our results suggest that the velocity of the user influences neither the bounds nor the accuracy of our estimator. Specifically, we observe that the state of the user with a high speed (42 m/s) can be estimated virtually with the same accuracy as a static user.

eess.SP↗

arXiv2022

Positioning and Sensing in 6G: Gaps, Challenges, and Opportunities

Among the key differentiators of 6G compared to 5G will be the increased emphasis on radio based positioning and sensing. These will be utilized not only for conventional location-aware services and for enhancing communication performance, but also to support new use case families with extreme performance requirements. This paper presents a unified vision from stakeholders across the value chain in terms of both opportunities and challenges for 6G positioning and sensing, as well as use cases, performance requirements, and gap analysis. Combined, this motivates the technical advances in 6G and guides system design.

eess.SP↗

arXiv2022

Analysis of V2X Sidelink Positioning in sub-6 GHz

Radio positioning is an important part of joint communication and sensing in beyond 5G communication systems. Existing works mainly focus on the mmWave bands and under-utilize the sub-6 GHz bands, even though it is promising for accurate positioning, especially when the multipath is uncomplicated, and meaningful in several important use cases. In this paper, we analyze V2X sidelink positioning and propose a new performance bound that can predict the positioning performance in the presence of severe multipath. Simulation results using ray-tracing data demonstrate the possibility of sidelink positioning, and the efficacy of the new performance bound and its relation with the complexity of the multipath.

eess.SP↗

arXiv2022

RIS-aided Near-Field Localization under Phase-Dependent Amplitude Variations

We investigate the problem of reconfigurable intelligent surface (RIS)-aided near-field localization of a user equipment (UE) served by a base station (BS) under phase-dependent amplitude variations at each RIS element. Through a misspecified Cramér-Rao bound (MCRB) analysis and a resulting lower bound (LB) on localization, we show that when the UE is unaware of amplitude variations (i.e., assumes unit-amplitude responses), severe performance penalties can arise, especially at high signal-to-noise ratios (SNRs). Leveraging Jacobi-Anger expansion to decouple range-azimuth-elevation dimensions, we develop a low-complexity approximated mismatched maximum likelihood (AMML) estimator, which is asymptotically tight to the LB. To mitigate performance loss due to model mismatch, we propose to jointly estimate the UE location and the RIS amplitude model parameters. The corresponding Cramér-Rao bound (CRB) is derived, as well as an iterative refinement algorithm, which employs the AMML method as a subroutine and alternatingly updates individual parameters of the RIS amplitude model. Simulation results indicate fast convergence and performance close to the CRB. The proposed method can successfully recover the performance loss of the AMML under a wide range of RIS parameters and effectively calibrate the RIS amplitude model online with the help of a user that has an a-priori unknown location.

eess.SP↗