arXiv subjects

N. Thomas

Publications and source records attributed to N. Thomas.

At least 55 records · Page 3Linked to original sources

arXiv2022

Analysis of Early Science observations with the CHaracterising ExOPlanets Satellite (CHEOPS) using pycheops

CHEOPS(CHaracterising ExOPlanet Satellite) is an ESA S-class mission that observes bright stars at high cadence from low-Earth orbit. The main aim of the mission is to characterize exoplanets that transit nearby stars using ultrahigh precision photometry. Here we report the analysis of transits observed by CHEOPS during its Early Science observing programme for four well-known exoplanets: GJ436b, HD106315b, HD97658b and GJ1132b. The analysis is done using pycheops, an open-source software package we have developed to easily and efficiently analyse CHEOPS light curve data using state-of-the-art techniques that are fully described herein. We show that the precision of the transit parameters measured using CHEOPS is comparable to that from larger space telescopes such as Spitzer Space Telescope and Kepler. We use the updated planet parameters from our analysis to derive new constraints on the internal structure of these four exoplanets.

astro-ph.EP↗

arXiv2022

Fundamental effective temperature measurements for eclipsing binary stars -- III. SPIRou near-infrared spectroscopy and CHEOPS photometry of the benchmark G0V star EBLM J0113+31

EBLM J0113+31 is moderately bright (V=10.1), metal-poor ([Fe/H]$\approx-0.3$) G0V star with a much fainter M dwarf companion on a wide, eccentric orbit (=14.3 d). We have used near-infrared spectroscopy obtained with the SPIRou spectrograph to measure the semi-amplitude of the M dwarf's spectroscopic orbit, and high-precision photometry of the eclipse and transit from the CHEOPS and TESS space missions to measure the geometry of this binary system. From the combined analysis of these data together with previously published observations we obtain the following model-independent masses and radii: $M_1 = 1.029 \pm 0.025 M_{\odot}$, $M_2 = 0.197 \pm 0.003 M_{\odot}$, $R_1 = 1.417 \pm 0.014 R_{\odot}$, $R_2 = 0.215 \pm 0.002 R_{\odot}$. Using $R_1$ and the parallax from Gaia EDR3 we find that this star's angular diameter is $θ= 0.0745 \pm 0.0007$ mas. The apparent bolometric flux of the G0V star corrected for both extinction and the contribution from the M dwarf ($<0.2$ per cent) is ${\mathcal F}_{\oplus,0} = (2.62\pm 0.05)\times10^{-9}$ erg.cm$^{-2}$.s$^{-1}$. Hence, this G0V star has an effective temperature $T_{\rm eff,1} = 6124{\rm\,K} \pm 40{\rm \,K\,(rnd.)} \pm 10 {\rm \,K\,(sys.)}$. EBLM J0113+31 is an ideal benchmark star that can be used for "end-to-end" tests of the stellar parameters measured by large-scale spectroscopic surveys, or stellar parameters derived from asteroseismology with PLATO. The techniques developed here can be applied to many other eclipsing binaries in order to create a network of such benchmark stars.

astro-ph.SR↗

arXiv2022

The atmosphere and architecture of WASP-189 b probed by its CHEOPS phase curve

Gas giants orbiting close to hot and massive early-type stars can reach dayside temperatures that are comparable to those of the coldest stars. These "ultra-hot Jupiters" have atmospheres made of ions and atomic species from molecular dissociation and feature strong day-to-night temperature gradients. Photometric observations at different orbital phases provide insights on the planet atmospheric properties. We analyse the photometric observations of WASP-189 acquired with the instrument CHEOPS to derive constraints on the system architecture and the planetary atmosphere. We implement a light curve model suited for asymmetric transit shape caused by the gravity-darkened photosphere of the fast-rotating host star. We also model the reflective and thermal components of the planetary flux, the effect of stellar oblateness and light-travel time on transit-eclipse timings, the stellar activity and CHEOPS systematics. From the asymmetric transit, we measure the size of the ultra-hot Jupiter WASP-189 b, $R_p=1.600^{+0.017}_{-0.016}\,R_J$, with a precision of 1%, and the true orbital obliquity of the planetary system $Ψ_p=89.6\pm1.2°$ (polar orbit). We detect no significant hotspot offset from the phase curve and obtain an eclipse depth $δ_\text{ecl}=96.5^{+4.5}_{-5.0}\,\text{ppm}$, from which we derive an upper limit on the geometric albedo: $A_g<0.48$. We also find that the eclipse depth can only be explained by thermal emission alone in the case of extremely inefficient energy redistribution. Finally, we attribute the photometric variability to the stellar rotation, either through superficial inhomogeneities or resonance couplings between the convective core and the radiative envelope.

astro-ph.EP↗

arXiv2022

CHEOPS geometric albedo of the hot Jupiter HD 209458b

We report the detection of the secondary eclipse of the hot Jupiter HD 209458b in optical/visible light using the CHEOPS space telescope. Our measurement of 20.4 +/- 3.3 ppm translates into a geometric albedo of A_g = 0.096 +/- 0.016. The previously estimated dayside temperature of about 1500 K implies that our geometric albedo measurement consists predominantly of reflected starlight and is largely uncontaminated by thermal emission. This makes the present result one of the most robust measurements of A_g for any exoplanet. Our calculations of the bandpass-integrated geometric albedo demonstrate that the measured value of A_g is consistent with a cloud-free atmosphere, where starlight is reflected via Rayleigh scattering by hydrogen molecules, and the water and sodium abundances are consistent with stellar metallicity. We predict that the bandpass-integrated TESS geometric albedo is too faint to detect and that a phase curve of HD 209458b observed by CHEOPS would have a distinct shape associated with Rayleigh scattering if the atmosphere is indeed cloud free.

astro-ph.EP↗

arXiv2022

Transit timing variations of AU Microscopii b and c

Here we report large-amplitude transit timing variations (TTVs) for AU\,Microcopii b and c as detected in combined TESS (2018, 2020) and CHEOPS (2020, 2021) transit observations. AU Mic is a young planetary system with a debris disk and two transiting warm Neptunes. A TTV on the order of several minutes was previously reported for AU Mic b, which was suggested to be an outcome of mutual perturbations between the planets in the system. In 2021, we observed AU Mic b (five transits) and c (three transits) with the CHEOPS space telescope to follow-up the TTV of AU Mic b and possibly detect a TTV for AU Mic c. When analyzing TESS and CHEOPS 2020--2021 measurements together, we find that a prominent TTV emerges with a full span of ~23 minutes between the two TTV extrema. Assuming that the period change results from a periodic process - such as mutual perturbations - we demonstrate that the times of transits in the summer of 2022 are expected to be 30--85 minutes later than predicted by the available linear ephemeris.

astro-ph.EP↗

arXiv2022

Spi-OPS: Spitzer and CHEOPS confirm the near-polar orbit of MASCARA-1 b and reveal a hint of dayside reflection

The light curves of tidally locked hot Jupiters transiting fast-rotating, early-type stars are a rich source of information about both the planet and star, with full-phase coverage enabling a detailed atmospheric characterisation of the planet. Although it is possible to determine the true spin-orbit angle $Ψ$, a notoriously difficult parameter to measure, from any transit asymmetry resulting from gravity darkening induced by the stellar rotation, the correlations that exist between the transit parameters have led to large disagreements in published values of $Ψ$ for some systems. We aimed to study these phenomena in the light curves of the ultra-hot Jupiter MASCARA-1 b. We obtained optical CHEOPS transit and occultation light curves of MASCARA-1 b, and analysed them jointly with a Spitzer/IRAC 4.5 $μ$m full-phase curve. When fitting the CHEOPS and Spitzer transits together, the degeneracies are greatly diminished and return results consistent with previously published Doppler tomography. Placing priors informed by the tomography achieves even better precision, allowing a determination of $Ψ=72.1^{+2.5}_{-2.4}$ deg. From the occultations and phase variations, we derived dayside and nightside temperatures of $3062^{+66}_{-68}$ K and $1720\pm330$ K, respectively. In addition, we could separately derive geometric albedo $A_g=0.171^{+0.066}_{-0.068}$ and spherical albedo $A_s=0.266^{+0.097}_{-0.100}$ from the CHEOPS data, and Bond albedo $A_B=0.057^{+0.083}_{-0.101}$ from the Spitzer phase curve. Where possible, priors informed by Doppler tomography should be used when fitting transits of fast-rotating stars, though multi-colour photometry may also unlock an accurate measurement of $Ψ$. Our approach to modelling the phase variations at different wavelengths provides a template for how to separate thermal emission from reflected light in spectrally resolved JWST phase curves.

astro-ph.EP↗

arXiv2021

The Gamow Explorer: A gamma-ray burst observatory to study the high redshift universe and enable multi-messenger astrophysics

The Gamow Explorer will use Gamma Ray Bursts (GRBs) to: 1) probe the high redshift universe (z > 6) when the first stars were born, galaxies formed and Hydrogen was reionized; and 2) enable multi-messenger astrophysics by rapidly identifying Electro-Magnetic (IR/Optical/X-ray) counterparts to Gravitational Wave (GW) events. GRBs have been detected out to z ~ 9 and their afterglows are a bright beacon lasting a few days that can be used to observe the spectral fingerprints of the host galaxy and intergalactic medium to map the period of reionization and early metal enrichment. Gamow Explorer is optimized to quickly identify high-z events to trigger follow-up observations with JWST and large ground-based telescopes. A wide field of view Lobster Eye X-ray Telescope (LEXT) will search for GRBs and locate them with arc-minute precision. When a GRB is detected, the rapidly slewing spacecraft will point the 5 photometric channel Photo-z Infra-Red Telescope (PIRT) to identify high redshift (z > 6) long GRBs within 100s and send an alert within 1000s of the GRB trigger. An L2 orbit provides > 95% observing efficiency with pointing optimized for follow up by the James Webb Space Telescope (JWST) and ground observatories. The predicted Gamow Explorer high-z rate is >10 times that of the Neil Gehrels Swift Observatory. The instrument and mission capabilities also enable rapid identification of short GRBs and their afterglows associated with GW events. The Gamow Explorer will be proposed to the 2021 NASA MIDEX call and if approved, launched in 2028.

astro-ph.HE↗

arXiv2021

The changing face of AU Mic b: stellar spots, spin-orbit commensurability, and Transit Timing Variations as seen by CHEOPS and TESS

AU Mic is a young planetary system with a resolved debris disc showing signs of planet formation and two transiting warm Neptunes near mean-motion resonances. Here we analyse three transits of AU Mic b observed with the CHaracterising ExOPlanet Satellite (CHEOPS), supplemented with sector 1 and 27 Transiting Exoplanet Survey Satellite (TESS) photometry, and the All-Sky Automated Survey (ASAS) from the ground. The refined orbital period of AU Mic b is 8.462995 \pm 0.000003 d, whereas the stellar rotational period is P_{rot}=4.8367 \pm 0.0006 d. The two periods indicate a 7:4 spin--orbit commensurability at a precision of 0.1%. Therefore, all transits are observed in front of one of the four possible stellar central longitudes. This is strongly supported by the observation that the same complex star-spot pattern is seen in the second and third CHEOPS visits that were separated by four orbits (and seven stellar rotations). Using a bootstrap analysis we find that flares and star spots reduce the accuracy of transit parameters by up to 10% in the planet-to-star radius ratio and the accuracy on transit time by 3-4 minutes. Nevertheless, occulted stellar spot features independently confirm the presence of transit timing variations (TTVs) with an amplitude of at least 4 minutes. We find that the outer companion, AU Mic c may cause the observed TTVs.

astro-ph.EP↗

arXiv2021

CHEOPS Precision Phase Curve of the Super-Earth 55 Cnc e

55 Cnc e is a transiting super-Earth (radius $1.88\rm\,R_\oplus$ and mass $8\rm\, M_\oplus$) orbiting a G8V host star on a 17-hour orbit. Spitzer observations of the planet's phase curve at 4.5 $μ$m revealed a time-varying occultation depth, and MOST optical observations are consistent with a time-varying phase curve amplitude and phase offset of maximum light. Both broadband and high-resolution spectroscopic analyses are consistent with either a high mean molecular weight atmosphere or no atmosphere for planet e. A long term photometric monitoring campaign on an independent optical telescope is needed to probe the variability in this system. We seek to measure the phase variations of 55 Cnc e with a broadband optical filter with the 30 cm effective aperture space telescope CHEOPS and explore how the precision photometry narrows down the range of possible scenarios. We observed 55 Cnc for 1.6 orbital phases in March of 2020. We designed a phase curve detrending toolkit for CHEOPS photometry which allows us to study the underlying flux variations of the 55 Cnc system. We detected a phase variation with a full-amplitude of $72 \pm 7$ ppm but do not detect a significant secondary eclipse of the planet. The shape of the phase variation resembles that of a piecewise-Lambertian, however the non-detection of the planetary secondary eclipse, and the large amplitude of the variations exclude reflection from the planetary surface as a possible origin of the observed phase variations. They are also likely incompatible with magnetospheric interactions between the star and planet but may imply that circumplanetary or circumstellar material modulate the flux of the system. Further precision photometry of 55 Cnc from CHEOPS will measure variations in the phase curve amplitude and shape over time this year.

astro-ph.EP↗

arXiv2021

The EBLM project -- VIII. First results for M-dwarf mass, radius and effective temperature measurements using CHEOPS light curves

The accuracy of theoretical mass, radius and effective temperature values for M-dwarf stars is an active topic of debate. Differences between observed and theoretical values have raised the possibility that current theoretical stellar structure and evolution models are inaccurate towards the low-mass end of the main sequence. To explore this issue we use the CHEOPS satellite to obtain high-precision light curves of eclipsing binaries with low mass stellar companions. We use these light curves combined with the spectroscopic orbit for the solar-type companion to measure the mass, radius and effective temperature of the M-dwarf star. Here we present the analysis of three eclipsing binaries. We use the pycheops data analysis software to fit the observed transit and eclipse events of each system. Two of our systems were also observed by the TESS satellite -- we similarly analyse these light curves for comparison. We find consistent results between CHEOPS and TESS, presenting three stellar radii and two stellar effective temperature values of low-mass stellar objects. These initial results from our on-going observing programme with CHEOPS show that we can expect to have ~24 new mass, radius and effective temperature measurements for very low mass stars within the next few years.

astro-ph.SR↗

arXiv2021

A transit survey to search for planets around hot subdwarfs: I. methods and performance tests on light curves from Kepler, K2, TESS, and CHEOPS

Context. Hot subdwarfs experienced strong mass loss on the Red Giant Branch (RGB) and are now hot and small He-burning objects. Aims. In this project we aim to perform a transit survey in all available light curves of hot subdwarfs from space-based telescopes (Kepler, K2, TESS, and CHEOPS), with our custom-made pipeline SHERLOCK, in order to determine the occurrence rate of planets around these stars, as a function of orbital period and planetary radius. Methods. In this first paper, we perform injection-and-recovery tests of synthetic transits for a selection of representative Kepler, K2 and TESS light curves, to determine which transiting bodies, in terms of object radius and orbital period, we will be able to detect with our tools. We also provide such estimates for CHEOPS data, which we analyze with the pycheops package. Results. Transiting objects with a radius $\lesssim$ 1.0 $R_{\Earth}$ can be detected in most of Kepler, K2 and CHEOPS targets for the shortest orbital periods (1 d and below), reaching values as small as $\sim$0.3 $R_{\Earth}$ in the best cases. Reaching sub-Earth-sized bodies is achieved only for the brightest TESS targets, and the ones observed during a significant number of sectors. We also give a series of representative results for farther and bigger planets, for which the performances strongly depend on the target magnitude, the length and the quality of the data. Conclusions. The TESS sample will provide the most important statistics for the global aim of measuring the planet occurrence rate around hot subdwarfs. The Kepler, K2 and CHEOPS data will allow us to search for planetary remnants, i.e. very close and small (possibly disintegrating) objects, which would have partly survived the engulfment in their red giant host.

astro-ph.EP↗

arXiv2020

The hot dayside and asymmetric transit of WASP-189b seen by CHEOPS

The CHEOPS space mission dedicated to exoplanet follow-up was launched in December 2019, equipped with the capacity to perform photometric measurements at the 20 ppm level. As CHEOPS carries out its observations in a broad optical passband, it can provide insights into the reflected light from exoplanets and constrain the short-wavelength thermal emission for the hottest of planets by observing occultations and phase curves. Here, we report the first CHEOPS observation of an occultation, namely, that of the hot Jupiter WASP-189b, a $M_P \approx 2 M_J$ planet orbiting an A-type star. We detected the occultation of WASP-189 b at high significance in individual measurements and derived an occultation depth of $dF = 87.9 \pm 4.3$ppm based on four occultations. We compared these measurements to model predictions and we find that they are consistent with an unreflective atmosphere heated to a temperature of $3435 \pm 27$K, when assuming inefficient heat redistribution. Furthermore, we present two transits of WASP-189b observed by CHEOPS. These transits have an asymmetric shape that we attribute to gravity darkening of the host star caused by its high rotation rate. We used these measurements to refine the planetary parameters, finding a $\sim25\%$ deeper transit compared to the discovery paper and updating the radius of WASP-189b to $1.619\pm0.021 R_J$. We further measured the projected orbital obliquity to be $λ= 86.4^{+2.9}_{-4.4}$deg, a value that is in good agreement with a previous measurement from spectroscopic observations, and derived a true obliquity of $Ψ= 85.4\pm4.3$deg. Finally, we provide reference values for the photometric precision attained by the CHEOPS satellite: for the V=6.6 mag star, and using a one-hour binning, we obtain a residual RMS between 10 and 17ppm on the individual light curves, and 5.7ppm when combining the four visits.

astro-ph.EP↗

arXiv2020

Ammonium salts are a reservoir of nitrogen on a cometary nucleus and possibly on some asteroids

The measured nitrogen-to-carbon ratio in comets is lower than for the Sun, a discrepancy which could be alleviated if there is an unknown reservoir of nitrogen in comets. The nucleus of comet 67P/Churyumov-Gerasimenko exhibits an unidentified broad spectral reflectance feature around 3.2 micrometers, which is ubiquitous across its surface. On the basis of laboratory experiments, we attribute this absorption band to ammonium salts mixed with dust on the surface. The depth of the band indicates that semivolatile ammonium salts are a substantial reservoir of nitrogen in the comet, potentially dominating over refractory organic matter and more volatile species. Similar absorption features appear in the spectra of some asteroids, implying a compositional link between asteroids, comets, and the parent interstellar cloud.

astro-ph.EP↗

arXiv2019

AMBITION -- Comet Nucleus Cryogenic Sample Return (White paper for ESA's Voyage 2050 programme)

This white paper proposes that AMBITION, a Comet Nucleus Sample Return mission, be a cornerstone of ESA's Voyage 2050 programme. We summarise some of the most important questions still open in cometary science after the successes of the Rosetta mission, many of which require sample analysis using techniques that are only possible in laboratories on Earth. We then summarise measurements, instrumentation and mission scenarios that can address these questions, with a recommendation that ESA select an ambitious cryogenic sample return mission. Rendezvous missions to Main Belt comets and Centaurs are compelling cases for M-class missions, expanding our knowledge by exploring new classes of comets. AMBITION would engage a wide community, drawing expertise from a vast range of disciplines within planetary science and astrophysics. With AMBITION, Europe will continue its leadership in the exploration of the most primitive Solar System bodies.

astro-ph.EP↗

arXiv2019

Quantum transport properties of industrial $^{28}$Si/$^{28}$SiO$_2$

We investigate the structural and quantum transport properties of isotopically enriched $^{28}$Si/$^{28}$SiO$_2$ stacks deposited on 300 mm Si wafers in an industrial CMOS fab. Highly uniform films are obtained with an isotopic purity greater than 99.92\%. Hall-bar transistors with an equivalent oxide thickness of 17 nm are fabricated in an academic cleanroom. A critical density for conduction of $1.75\times10^{11}$ cm$^{-2}$ and a peak mobility of 9800 cm$^2$/Vs are measured at a temperature of 1.7 K. The $^{28}$Si/$^{28}$SiO$_2$ interface is characterized by a roughness of $Δ=0.4$ nm and a correlation length of $Λ=3.4$ nm. An upper bound for valley splitting energy of 480 $μ$eV is estimated at an effective electric field of 9.5 MV/m. These results support the use of wafer-scale $^{28}$Si/$^{28}$SiO$_2$ as a promising material platform to manufacture industrial spin qubits.

cond-mat.mes-hall↗

arXiv2017

Tensile Strength of 67P/Churyumov-Gerasimenko Nucleus Material from Overhangs

We directly measure twenty overhanging cliffs on the surface of comet 67P/Churyumov-Gerasimenko extracted from the latest shape model and estimate the minimum tensile strengths needed to support them against collapse under the comet's gravity. We find extremely low strengths of around one Pa or less (one to five Pa, when scaled to a metre length). The presence of eroded material at the base of most overhangs, as well as the observed collapse of two features and implied previous collapse of another, suggests that they are prone to failure and that true material strengths are close to these lower limits (although we only consider static stresses and not dynamic stress from, for example, cometary activity). Thus, a tensile strength of a few pascals is a good approximation for the tensile strength of 67P's nucleus material, which is in agreement with previous work. We find no particular trends in overhang properties with size, over the $\sim10-100$ m range studied here, or location on the nucleus. There are no obvious differences, in terms of strength, height or evidence of collapse, between the populations of overhangs on the two cometary lobes, suggesting that 67P is relatively homogenous in terms of tensile strength. Low material strengths are supportive of cometary formation as a primordial rubble pile or by collisional fragmentation of a small (tens of km) body.

astro-ph.EP↗

arXiv2017

Thermal fracturing on comets. Applications to 67P/Churyumov-Gerasimenko

We simulate the stresses induced by temperature changes in a putative hard layer near the surface of comet 67P/Churyumov--Gerasimenko with a thermo-viscoelastic model. Such a layer could be formed by the recondensation or sintering of water ice (and dust grains), as suggested by laboratory experiments and computer simulations, and would explain the high compressive strength encountered by experiments on board the Philae lander. Changes in temperature from seasonal insolation variation penetrate into the comet's surface to depths controlled by the thermal inertia, causing the material to expand and contract. Modelling this with a Maxwellian viscoelastic response on a spherical nucleus, we show that a hard, icy layer with similar properties to Martian permafrost will experience high stresses: up to tens of MPa, which exceed its material strength (a few MPa), down to depths of centimetres to a metre. The stress distribution with latitude is confirmed qualitatively when taking into account the comet's complex shape but neglecting thermal inertia. Stress is found to be comparable to the material strength everywhere for sufficient thermal inertia ($\gtrsim50$ J m$^{-2}$ K$^{-1}$ s$^{-1/2}$) and ice content ($\gtrsim 45\%$ at the equator). In this case, stresses penetrate to a typical depth of $\sim0.25$ m, consistent with the detection of metre-scale thermal contraction crack polygons all over the comet. Thermal fracturing may be an important erosion process on cometary surfaces which breaks down material and weakens cliffs.

astro-ph.EP↗

arXiv2017

An Impacting Descent Probe for Europa and the other Galilean Moons of Jupiter

We present a study of an impacting descent probe that increases the science return of spacecraft orbiting or passing an atmosphere-less planetary body of the solar system, such as the Galilean moons of Jupiter. The descent probe is a carry-on small spacecraft (< 100 kg), to be deployed by the mother spacecraft, that brings itself onto a collisional trajectory with the targeted planetary body in a simple manner. A possible science payload includes instruments for surface imaging, characterisation of the neutral exosphere, and magnetic field and plasma measurement near the target body down to very low-altitudes (~1 km), during the probe's fast (~km/s) descent to the surface until impact. The science goals and the concept of operation are discussed with particular reference to Europa, including options for flying through water plumes and after-impact retrieval of very-low altitude science data. All in all, it is demonstrated how the descent probe has the potential to provide a high science return to a mission at a low extra level of complexity, engineering effort, and risk. This study builds upon earlier studies for a Callisto Descent Probe (CDP) for the former Europa-Jupiter System Mission (EJSM) of ESA and NASA, and extends them with a detailed assessment of a descent probe designed to be an additional science payload for the NASA Europa Mission.

astro-ph.EP↗