Searcharxiv⌕ Search

arXiv subjects

N. Vandewalle

Publications and source records attributed to N. Vandewalle.

At least 19 recordsLinked to original sources

Emergence of Stigmergic Transport in Granular Environments

We show that stigmergic path formation emerges in a deformable environment through the interplay between environmental memory and geometrical crowding. Using experiments with robotic random walkers together with a minimal stochastic model, we demonstrate the onset of persistent self-reinforced transport pathways above a critical packing fraction $ϕ_c$, where environmental memory enhances walker mobility. As the jamming transition $ϕ_J$ is approached, increasing crowding progressively suppresses this transport enhancement despite the persistence of environmental memory. The resulting non-monotonic behavior reveals an optimal transport regime well below jamming. More generally, our work establishes how active agents can collectively build transport networks through purely mechanical interactions with a deformable substrate.

cond-mat.stat-mech↗

Multiple droplets dynamics on cylindrical fiber

We investigate the descent of a single droplet on a vertical fiber and its role in generating additional droplets. As the droplet slides, it deposits a non-uniform liquid film whose thickness decreases along the fiber. The thicker portion near the release point undergoes a Rayleigh-Plateau instability, leading to the formation of a new droplet. This newly formed droplet initially accelerates by accumulating fluid from the film ahead, then shifts to a decelerating phase once fluid loss at its rear dominates. Ultimately, it merges with the original droplet. This refeeding allows the droplet to travel further. Successive generations of droplets can similarly arise, governed by the evolving film thickness. We develop theoretical models that capture each phase of motion and discuss the experimental and theoretical aspects of this cascading cycle of droplet generation.

physics.flu-dyn↗

GRASPion: an Open-Source, Programmable Brainbot for Active Matter Research

We present the GRASPion, a compact, open-source bristlebot designed for the controlled study of active matter systems. Built around a low-cost Arduino-compatible board and modular 3D-printed components, the GRASPion combines ease of use, programmability, and mechanical versatility. It features dual vibrating motors for self-propulsion, integrated sensors for local interaction, and customizable firmware enabling various motion modes, from ballistic to diffusive regimes. The robot is equipped with onboard IR communication, color and proximity sensors, and a magnetometer, allowing for real-time interaction and complex collective behaviors. With a runtime exceeding 90 minutes and reproducible fabrication, the GRASPion provides a robust and scalable platform for both educational and research applications in out-of-equilibrium physics. This article details the mechanical and electronic design and software architecture of the GRASPion, and illustrates its capabilities through prototypical experiments relevant to active matter.

cond-mat.soft↗

Brainbots as smart autonomous active particles with programmable motion

We present an innovative robotic device designed to provide controlled motion for studying active matter. Motion is driven by an internal vibrator powered by a small rechargeable battery. The system integrates acoustic and magnetic sensors along with a programmable microcontroller. Unlike conventional vibrobots, the motor induces horizontal vibrations, resulting in cycloidal trajectories that have been characterized and optimized. Portions of these orbits can be utilized to create specific motion patterns. As a proof of concept, we demonstrate how this versatile system can be exploited to develop active particles with varying dynamics, ranging from ballistic motion to run-and-tumble diffusive behavior.

cs.RO↗

Magnetoelastic instability in soft thin films

Ferromagnetic particles are incorporated in a thin soft elastic matrix. A lamella, made of this smart material, is studied experimentally and modeled. We show herein that thin films can be actuated using an external magnetic field applied through the system. The system is found to be switchable since subcritical pitchfork bifurcation is discovered in the beam shape when the magnetic field orientation is modified. Strong magnetoelastic effects can be obtained depending on both field strength and orientation. Our results provide versatile ways to contribute to many applications from the microfabrication of actuators to soft robotics. As an example, we created a small synthetic octopus piloted by an external magnetic field.

cond-mat.soft↗

Rotation of a ice disc during the melting on a solid plate

Ice discs were released at the surface of a thermalized aluminium plate. The fusion of the ice creates a lubrication film between the ice disc and the plate. The disc becomes very mobile. The situation is isomorphe to the Leidenfrost effect reported for liquid droplet evaporating at the surface of a plate which temperature is over the boiling temperature of the liquid. For the ice discs, we observe that, while the ice discs were melting, they were rotating. The ice disc rotates starts rotating. The rotation speed increases with the temperature of the plate and with the load put on the ice disc. A model is proposed to explain the spontaneous rotation of the ice disc. We claim that the rotation is due to the viscous entrainment of the ice disc by the liquid that flows around the ice disc.

physics.flu-dyn↗

Rotation of a melting ice at the surface of a pool

Large circular ice blocks up to 80 m of diameter have been observed on frozen river around the world. This rare event has been reported in a publication in 1993. This fascinating self-fashioned object slowly rotates at about 1$^o$ per second. In this paper, we report a model experiment consisting in a 85 mm of diameter ice disc at the surface of a thermalised pool. The rotation speed has been found to increase with the bath temperature. Using particle image velocimetry technique, we evidence the presence of a vortex below the ice block. This vortex results from the descending flow of high density water at 4$^o$C. The vorticity of the vortex induces the rotation of the ice block. This mechanism is generic of any vertical flow that generates a vortex which induces the rotation of a floating object.

physics.flu-dyn↗

Flow of magnetic repelling grains in a two-dimensional silo

During a typical silo discharge, the material flow rate is determined by the contact forces between the grains. Here, we report an original study concerning the discharge of a two-dimensional silo filled with repelling magnetic grains. This non-contact interaction leads to a different dynamics from the one observed with conventional granular materials. We found that, although the flow rate dependence on the aperture size follows roughly the power-law with an exponent $3/2$ found in non-repulsive systems, the density and velocity profiles during the discharge are totally different. New phenomena must be taken into account. Despite the absence of contacts, clogging and intermittence were also observed for apertures smaller than a critical size determined by the effective radius of the repulsive grains.

cond-mat.soft↗

Strings of droplets propelled by coherent waves

Bouncing walking droplets possess fascinating properties due to their peculiar wave/particule interaction. In order to study such walkers in a 1d system, we considered the case of one or more droplets in an annular cavity. We show that, in this geometry, walking droplets form a string of synchronized bouncing droplets that share a common coherent wave propelling the group at a speed faster than single walkers. The formation of this coherent wave and the collective behavior of droplets is captured by a model.

physics.flu-dyn↗

Toward Bernal Random Loose Packing through freeze-thaw cycling

We study the effect of freeze-thaw cycling on the packing fraction of equal spheres immersed in water. The water located between the grains experiences a dilatation during freezing and a contraction during melting. After several cycles, the packing fraction converges to a particular value $η_{\infty} = 0.595$ independently of its initial value $η_0$. This behavior is well reproduced by numerical simulations. Moreover, the numerical results allow to analyze the packing structural configuration. With a Voronoï partition analysis, we show that the piles are fully random during the whole process and are characterized by two parameters: the average Voronoï volume $μ_v$ (related to the packing fraction $η$) and the standard deviation $σ_v$ of Voronoï volumes. The freeze-thaw driving modify the volume standard deviation $σ_v$ to converge to a particular disordered state with a packing fraction corresponding to the Random Loose Packing fraction $η_{BRLP}$ obtained by Bernal during his pioneering experimental work. Therefore, freeze-thaw cycling is found to be a soft and spatially homogeneous driving method for disordered granular materials.

cond-mat.dis-nn↗

Resonant and antiresonant bouncing droplets

When placed onto a vibrating liquid bath, a droplet may adopt a permanent bouncing behavior, depending on both the forcing frequency and the forcing amplitude. The relationship between the droplet deformations and the bouncing mechanism is studied experimentally and theoretically through an asymmetric and dissipative bouncing spring model. Antiresonance effects are evidenced. Experiments and theoretical predictions show that both resonance at specific frequencies and antiresonance at Rayleigh frequencies play crucial roles in the bouncing mechanism. In particular, we show that they can be exploited for droplet size selection.

cond-mat.soft↗

Customizing mesoscale self-assembly with 3D printing

Self-assembly due to capillary forces is a common method for generating 2D mesoscale structures from identical floating particles at the liquid-air interface. Designing building blocks to obtain a desired mesoscopic structure is a scientific challenge. We show herein that it is possible to shape the particles with a low cost 3D printer, for composing specific mesoscopic structures. Our method is based on the creation of capillary multipoles inducing either attractive or repulsive forces. Since capillary interactions can be downscaled, our method opens new ways to low cost microfabrication.

cond-mat.soft↗

Magnetic ghosts and monopoles

While the physics of equilibrium systems composed of many particles is well known, the interplay between small-scale physics and global properties is still a mystery for athermal systems. Non-trivial patterns and metastable states are often reached in those systems. We explored the various arrangements adopted by magnetic beads along chains and rings. Here, we show that it is possible to create mechanically stable defects in dipole arrangements keeping the memory of dipole frustration. Such defects, nicknamed "ghost junctions", seem to act as macroscopic magnetic monopoles, in a way reminiscent of spin ice systems.

cond-mat.stat-mech↗

A fountain of droplets

A vessel is plunged upside down into a pool of 50 cSt silicone oil. An air bell is then created. This bell is vertically shaken at 60 Hz that leads to the oscillation of the air/oil interface. The edges of the immersed vessel generate surface waves that propagate towards the center of the bell. When the amplitude of the oscillation increases, wave amplitude increases. We study the influence of the angle between successive sides on the wave patterns. Two kinds of vessel have been studied: a triangular and a square prism. The shape of the air/oil meniscus depends on the angle between the sides of the considered prism. As the amplitude of the oscillation is increased, the triple line, which is the contact line between the solid and the air/oil interface, moves up and down. Above a given acceleration that depends on the immersion depth and on the shape vessel, wave goes under the corner edge of the bell. During the oscillation, the wave generates at the edges presents a singularity that leads eventually to a jet and a drop ejection. A drop is ejected at each oscillation. More complicated ejection can be produced with further increase of the amplitude. This is a sample arXiv article illustrating the use of fluid dynamics videos.

physics.flu-dyn↗

Freezing Splashes

We have studied the splashing dynamics of water drops impacting granular layers. Depending on the drop kinetic energy, various shapes are observed for the resulting craters. Experimental parameters that have been considered are : the size of the millimetric droplets; the height of the free fall, ranging from 1.5 cm to 100 cm; and the diameter of the grains. As the drop is impacting the granular layer, energy is dissipated and a splash of grain occurs. Meanwhile, surface tension, inertia and viscosity compete, leading to strong deformations of the drop which depend on the experimental conditions. Just after the drop enters into contact with the granular bed, imbibition takes place and increases the apparent viscosity of the fluid. The drop motion is stopped by this phenomenon. Images and fast-video recordings of the impacts allowed to find scaling laws for the crater morphology and size. This abstract is related to a fluid dynamics video for the APS DFD gallery of fluid motion 2010.

physics.flu-dyn↗

Effect of an electric field on an intermittent granular flow

Granular gravity driven flows of glass beads have been observed in a silo with a flat bottom. A DC high electric field has been applied perpendicularly to the silo to tune the cohesion. The outlet mass flow has been measured. An image subtraction technique has been applied to visualize the flow geometry and a spatiotemporal analysis of the flow dynamics has been performed. The outlet mass flow is independent of voltage, but a transition from funnel flow to rathole flow is observed. This transition is of probabilistic nature and an intermediate situation exists between the funnel and the rathole situations. At a given voltage, two kinds of flow dynamics can occur : a continuous flow or an intermittent flow. The electric field increases the probability to observe an intermittent flow.

cond-mat.soft↗

Faraday instability on a network

Faraday waves are generated at the air/liquid interface inside an array of square cells. As the free surface inside each cell is destabilizing due to the oscillations, the shape of the free surface is drastically changing. Depending on the value of the frequency f of oscillations, different patterns are observed inside each cell. For well defined f values, neighboring cells are observed to interact and a general organization is noticed. In such a situation, initially disordered structures lead to a general pattern covering the entire liquid pool and a spatial order appears all over the cell array. This abstract is related to a fluid dynamics video for the gallery of fluid motion 2009.

physics.flu-dyn↗

Antibubbles in a cyclone eyewall

A negative bubble, coined antibubble, is composed by a thin air shell that is immersed in a soapy mixture. A large vortex is generated in the liquid using a mixer. An antibubble is then created close to the surface. The antibubble is fastly attracted by the vortex. It rotates arount the core and comes closer and closer. When the stress is large enough, the vortex deforms the antibubble that winds around the eye vortex. The antibubble looks like a spiral. Under some conditions, the antibubble splits into several antibubbles that are ejected out of the eye vortex while the largest part is still trapped the vortex. This latter is elongated and is absorbed to the bottom of the tank before popping. fluid dynamics video

physics.flu-dyn↗