arXiv subjects

N. Vandewalle

Publications and source records attributed to N. Vandewalle.

At least 37 records · Page 2Linked to original sources

arXiv2009

Compaction dynamics of a magnetized powder

We have investigated experimentally the influence of a magnetic interaction between the grains on the compaction dynamics of a granular pile submitted to a series of taps. The granular material used to perform this study is a mixture of metallic and glass grains. The packing is immersed in an homogeneous external magnetic field. The magnetic field induces an interaction between the metallic grains that constitutes the tunable cohesion. The compaction characteristic time and the asymptotic packing fraction have been measured as a function of the Bond number which is the ratio between the cohesive magnetic force and the grain weight. These measurements have been performed for different fractions of metallic beads in the pile. When the pile is only made of metallic grains, the characteristic compaction time increases as the square root of the Bond number. While the asymptotic packing fraction decreases as the inverse of the Bond number. For mixtures, when the fraction of magnetized grains in the pile is increased, the characteristic time increases while the asymptotic packing fraction decreases. A simple mesoscopic model based on the formation of granular chains along the magnetic field direction is proposed to explain the observed macroscopic properties of the packings.

cond-mat.dis-nn↗

arXiv2008

Bouncing trimer: a random self-propelled particle, chaos and periodical motions

A trimer is an object composed of three centimetrical stainless steel beads equally distant and is predestined to show richer behaviours than the bouncing ball or the bouncing dimer. The rigid trimer has been placed on a plate of a electromagnetic shaker and has been vertically vibrated according to a sinusoidal signal. The horizontal translational and rotational motions of the trimer have been recorded for a range of frequencies between 25 and 100 Hz while the amplitude of the forcing vibration was tuned for obtaining maximal acceleration of the plate up to 10 times the gravity. Several modes have been detected like e.g. rotational and pure translational motions. These modes are found at determined accelerations of the plate and do not depend on the frequency. By recording the time delays between two successive contacts when the frequency and the amplitude are fixed, a mapping of the bouncing regime has been constructed and compared to that of the dimer and the bouncing ball. Period-2 and period-3 orbits have been experimentally observed. In these modes, according to observations, the contact between the trimer and the plate is persistent between two successive jumps. This persistence erases the memory of the jump preceding the contact. A model is proposed and allows to explain the values of the particular accelerations for which period-2 and period-3 modes are observed. Finally, numerical simulations allow to reproduce the experimental results. That allows to conclude that the friction between the beads and the plate is the major dissipative process.

nlin.CD↗

arXiv2008

Resonant and rolling droplet

When an oil droplet is placed on a quiescent oil bath, it eventually collapses into the bath due to gravity. The resulting coalescence may be eliminated when the bath is vertically vibrated. The droplet bounces periodically on the bath, and the air layer between the droplet and the bath is replenished at each bounce. This sustained bouncing motion is achieved when the forcing acceleration is higher than a threshold value. When the droplet has a sufficiently low viscosity, it significantly deforms : spherical harmonic \boldmath{$Y_{\ell}^m$} modes are excited, resulting in resonant effects on the threshold acceleration curve. Indeed, a lower acceleration is needed when $\ell$ modes with $m=0$ are excited. Modes $m \ne 0$ are found to decrease the bouncing ability of the droplet. When the mode $\ell=2$ and $m=1$ is excited, the droplet rolls on the vibrated surface without touching it, leading to a new self-propulsion mode.

physics.flu-dyn↗

arXiv2007

How long will a bubble be ?

A soap bubble is a metastable object that eventually breaks. Indeed, the soapy water film thins until rupture, due to drainage and evaporation. In our experimental investigations, floating bubbles at the surface of a liquid bath have been considered. Their lifetime has been measured and reported with respect to their radius. Large bubbles last longer than small ones. Moreover, small bubbles have more predictable lifetimes than large ones. We propose a general equation for that lifetime, based on the lubrication theory. The evaporation is shown to be an essential process which determines the bubble lifetime.

physics.flu-dyn↗

arXiv2007

Controlling the partial coalescence of a droplet on a vertically vibrated bath

A new method is proposed to stop the cascade of partial coalescences of a droplet laid on a liquid bath. The strategy consists in vibrating the bath in the vertical direction in order to keep small droplets bouncing. Since large droplets are not able to bounce, they partially coalesce until they reach a critical size. The system behaves as a low pass filter : droplets smaller than the critical size are selected. This size has been investigated as a function of the acceleration and the frequency of the bath vibration. Results suggest that the limit size for bouncing is related to the first mode of the droplet deformation.

physics.flu-dyn↗

arXiv2007

Effects of electromagnetic waves on the electrical properties of contacts between grains

A DC electrical current is injected through a chain of metallic beads. The electrical resistances of each bead-bead contacts are measured. At low current, the distribution of these resistances is large and log-normal. At high enough current, the resistance distribution becomes sharp and Gaussian due to the creation of microweldings between some beads. The action of nearby electromagnetic waves (sparks) on the electrical conductivity of the chain is also studied. The spark effect is to lower the resistance values of the more resistive contacts, the best conductive ones remaining unaffected by the spark production. The spark is able to induce through the chain a current enough to create microweldings between some beads. This explains why the electrical resistance of a granular medium is so sensitive to the electromagnetic waves produced in its vicinity.

cond-mat.soft↗

arXiv2007

About the lifetime of a bouncing droplet

When a droplet is gently laid onto the surface of the same liquid, it stays at rest for a moment before coalescence. The coalescence can be delayed and sometimes inhibited by injecting fresh air under the droplet. This can happen when the surface of the bath oscillates vertically, in this case the droplet basically bounces on the interface. The lifetime of the droplet has been studied with respect to the amplitude and the frequency of the excitation. The lifetime decreases when the acceleration increases. The thickness of the air film between the droplet and the bath has been investigated using interference fringes obtained when the system is illuminated by low pressure sodium lamps. Moreover, both the shape evolution and the motion of the droplet center of mass have been recorded in order to evidence the phase offset between the deformation and the trajectory. A short lifetime is correlated to a small air film thickness and to a large phase offset between the maximum of deformation and the minimum of the vertical position of the centre of mass.

nlin.CD↗

arXiv2006

Critical parameters for the partial coalescence of a droplet

The partial coalescence of a droplet onto a planar liquid/liquid interface is investigated experimentally by tuning the viscosities of both liquids. The problem mainly depends on four dimensionless parameters: the Bond number (gravity vs. surface tension), the Ohnesorge numbers (viscosity in both fluids vs. surface tension), and the density relative difference. The ratio between the daughter droplet size and the mother droplet size is investigated as a function of these dimensionless numbers. Global quantities such as the available surface energy of the droplet has been measured during the coalescence. The capillary waves propagation and damping are studied in detail. The relation between these waves and the partial coalescence is discussed. Additional viscous mechanisms are proposed in order to explain the asymmetric role played by both viscosities.

physics.flu-dyn↗

arXiv2006

Experimental study of the compaction dynamics for 2D anisotropic granular materials

We present an experimental study of the compaction dynamics for two-dimensional anisotropic granular systems. Compaction dynamics is measured at three different scales : (i) the macroscopic scale through the packing fraction $ρ$, (ii) the mesoscopic scale through both fractions of aligned grains $ϕ_{a}$ and ideally ordered grains $ϕ_{io}$, and (iii) the microscopic scale through both rotational and translational grain mobilities $μ_{r,t}$. The effect of the grain rotations on the compaction dynamics has been measured. At the macroscopic scale, we have observed a discontinuity in the late stages of the compaction curve. At the mesoscopic scale, we have observed the formation and the growth of domains made of aligned grains. From a microscopic point of view, measurements reveal that the beginning of the compaction process is essentially related to translational motion of the grains. The grains rotations drive mainly the process during the latest stages of compaction.

cond-mat.dis-nn↗

arXiv2004

Effect of friction in a toy model of granular compaction

We proposed a toy model of granular compaction which includes some resistance due to granular arches. In this model, the solid/solid friction of contacting grains is a key parameter and a slipping threshold Wc is defined. Realistic compaction behaviors have been obtained. Two regimes separated by a critical point Wc* of the slipping threshold have been emphasized : (i) a slow compaction with lots of paralyzed regions, and (ii) an inverse logarithmic dynamics with a power law scaling of grain mobility. Below the critical point Wc*, the physical properties of this frozen system become independent of Wc. Above the critical point Wc*, i.e. for low friction values, the packing properties behave as described by the classical Janssen theory for silos.

cond-mat.other↗

arXiv2004

Compaction of anisotropic granular materials : experiments and simulations

We present both experimental and numerical investigations of compaction in granular materials composed of rods. As a function of the aspect ratio of the particles, we have observed large variations of the asymptotic packing volume fraction in vertical tubes. The relevant parameter is the ratio between the rod length $\ell$ and the tube diameter $D$. Even the compaction dynamics remains unchanged for various particle lengths, a 3d/2d phase transition for grain orientations is observed for $\ell/D = 1$. A toy model for the compaction of needles on a lattice is also proposed. This toy model gives a complementary view of our experimental results and leads to behaviors similar to experimental ones.

cond-mat.stat-mech↗

arXiv2004

Rolling/Slipping Motion of Euler's Disk

We present an experimental study of the motion of a circular disk spun onto a table. With the help of a high speed video system, the temporal evolutions of (i) the inclination angle $α$, (ii) the angular velocity $ω$ and (iii) the precession rate $Ω$ are studied. The influence of the mass of the disk and the friction between the disk and the supporting surface are considered. %The motions of disks with different masses and over different surfaces are studied. The inclination angle $α$ and the angular velocity are observed to decrease according to a power law. We also show that the precession rate $Ω$ diverges as the disk stops. Exponents are measured very near the collapse as well as on long range times. Collapsing times have been also measured. The results are compared with previous theoretical and experimental works. The major source of energy dissipation is found to be the slipping of the disk on the plane.

cond-mat.stat-mech↗

arXiv2004

Networks of equities in financial markets

We review the recent approach of correlation based networks of financial equities. We investigate portfolio of stocks at different time horizons, financial indices and volatility time series and we show that meaningful economic information can be extracted from noise dressed correlation matrices. We show that the method can be used to falsify widespread market models by directly comparing the topological properties of networks of real and artificial markets.

cond-mat.stat-mech↗

arXiv2004

Block to granular-like transition in dense bubble flows

We have experimentally investigated 2-dimensional dense bubble flows underneath inclined planes. Velocity profiles and velocity fluctuations have been measured. A broad second-order phase transition between two dynamical regimes is observed as a function of the tilt angle $θ$. For low $θ$ values, a block motion is observed. For high $θ$ values, the velocity profile becomes curved and a shear velocity gradient appears in the flow.

cond-mat.soft↗

arXiv2003

Aging process of electrical contacts in granular matter

The electrical resistance decay of a metallic granular packing has been measured as a function of time. This measurement gives information about the size of the conducting cluster formed by the well connected grains. Several regimes have been encountered. Chronologically, the first one concerns the growth of the conducting cluster and is identified to belong to diffusion processes through a stretched exponential behavior. The relaxation time is found to be simply related to the initial injected power. This regime is followed by a reorganisation process due to thermal dilatation. For the long term behavior of the decay, an aging process occurs and enhances the electrical contacts between grains through microsoldering.

cond-mat.mtrl-sci↗

arXiv2003

Antibubbles: evidences of a critical pressure

We present experimental investigations of antibubbles. Such an unusual fluid object is a thin spherical air shell surrounding a liquid globule. We explain how to produce them and we study their stability. By overweighting antibubbles with a small amount of salt, they sink and pop at a definite depth. A critical depth related to a critical pressure has been found. A modified Laplace law describes the air shell thickness evolution with respect to pressure. This law combined with surfactant layers interaction allows to explain the critical depth for antibubble stability.

cond-mat.soft↗

arXiv2003

Long lasting instabilities in granular mixtures

We have performed experiments of axial segregation in the Oyama's drum. We have tested binary granular mixtures during very long times. The segregation patterns have been captured by a CCD camera and spatio-temporal graphs are created. We report the occurence of instabilities which can last several hours. We stress that those instabilities originate from the competition between axial and radial segregations. We put into evidence the occurence of giant fluctuations in the fraction of grain species along the surface during the unstable periods.

cond-mat.soft↗

arXiv2003

Limit current density in 2D metallic granular packings

The electrical properties 2D of packed metallic pentagons have been studied. The characterization of such metallic pentagon heaps (like $i-V$ measurements) has been achieved and has allowed to point out two distinct conduction regimes. They are separated by a transition line along which the system exhibits a memory effect behavior due to the irreversible improvement of electrical contacts between pentagons (hot spots). A limit current density has been found.

cond-mat.stat-mech↗