arXiv subjects

Nader Engheta

Publications and source records attributed to Nader Engheta.

At least 55 records · Page 3Linked to original sources

arXiv2020

A Fully Integrated Sensor-Brain-Machine Interface System for Restoring Somatosensation

Sensory feedback is critical to the performance of neural prostheses that restore movement control after neurological injury. Recent advances in direct neural control of paralyzed arms present new requirements for miniaturized, low-power sensor systems. To address this challenge, we developed a fully-integrated wireless sensor-brain-machine interface (SBMI) system for communicating key somatosensory signals, fingertip forces and limb joint angles, to the brain. The system consists of a tactile force sensor, an electrogoniometer, and a neural interface. The tactile force sensor features a novel optical waveguide on CMOS design for sensing. The electrogoniometer integrates an ultra low-power digital signal processor (DSP) for real-time joint angle measurement. The neural interface enables bidirectional neural stimulation and recording. Innovative designs of sensors and sensing interfaces, analog-to-digital converters (ADC) and ultra wide-band (UWB) wireless transceivers have been developed. The prototypes have been fabricated in 180nm standard CMOS technology and tested on the bench and in vivo. The developed system provides a novel solution for providing somatosensory feedback to next-generation neural prostheses.

q-bio.NC↗

arXiv2020

A single inverse-designed photonic structure that performs parallel computing

In the search for improved computational capabilities, conventional microelectronic computers are facing various problems arising from the miniaturization and concentration of active electronics devices (1-2). Therefore, researchers have been exploring several paths for the next generation of computing platforms, which could exploit various physical phenomena for solving mathematical problems at higher speeds and larger capacities. Among others, physical systems described by waves, such as photonic and quantum devices, have been utilized to compute the solution of mathematical problems (1-18). However, previous devices have not fully exploited the linearity of the wave equation, which as we show here, allows for the simultaneous parallel solution of several independent mathematical problems within the same device. In this Letter, we demonstrate, theoretically and experimentally, that a transmissive cavity filled with a judiciously tailored dielectric distribution and embedded in a multi-frequency feedback loop can calculate the solutions of an arbitrary number of mathematical problems simultaneously. We design, build, and test a computing structure at microwave frequencies that solves two independent integral equations with any two arbitrary inputs. We offer another design that can invert four arbitrary 5x5 matrices, confirming its functionality with numerical simulations. We believe our results presented here can provide "coincident computing" and pave the way for the design of low-power, ultrafast, parallel photonic analog computing devices for sensing and signal processing in embedded computing applications.

physics.optics↗

arXiv2020

Dependence of the Nonlinear-Optical Response of Materials on their Linear $ε$ and $μ$

We investigate, theoretically and numerically, the dependence of a material's nonlinear-optical response on the linear relative electric permittivity $ε$ and magnetic permeability $μ$. The conversion efficiency of low-order harmonic-generation processes, as well as the increase rate of Kerr-effect nonlinear phase shift and nonlinear losses from two-photon absorption (TPA), are seen to increase with decreasing $ε$ and/or increasing $μ$. We also discuss the rationale and physical insights behind this nonlinear response, particularly its enhancement in $ε$-near-zero (ENZ) media. This behavior is consistent with the experimental observation of intriguingly high effective nonlinear refractive index in degenerate semiconductors such as indium tin oxide [\textit{Alam et al., Science 352 (795), 2016}] (where the nonlinearity is attributed to a modification of the energy distribution of conduction-band electrons due to laser-induced electron heating) and aluminum zinc oxide [\textit{Caspani et al., Phys. Rev. Lett. 116 (233901), 2016}] at frequencies with vanishing real part of the linear permittivity. Such strong nonlinear response can pave the way for a new paradigm in nonlinear optics with much higher conversion efficiencies and therefore better miniaturization capabilities and power requirements for next-generation integrated nanophotonics.

physics.optics↗

arXiv2020

A Generalization of the Kramers-Kronig Relations for Linear Time-Varying Media

We explore the mathematical theory to rigorously describe the response of media with linear time-varying, generally dispersive, electromagnetic constitutive parameters. We show that even when the temporal inhomogeneity takes place on a time scale comparable or shorter than the driving fields' time period, one can still define a physically meaningful time-varying dispersion. Accordingly, a generalized set of Kramers-Kronig relations is investigated to link the real and imaginary parts of the time-varying frequency-dispersive spectra characterizing the medium's constitutive response. Among others, we study the case of a Lorentzian dielectric response with time-varying volumetric density of polarizable atoms and present the varying circuital equivalents of the governing differential equation, which in turn allow us to use the notion of generalized time-varying impedances/admittances of a time-dependent resistor, inductor and capacitor.

physics.optics↗

arXiv2020

On modifications of fundamental radiative processes in near-zero-index media of various dimensions

Spontaneous emission, stimulated emission and absorption are the three fundamental radiative processes describing light-matter interactions. Here, we theoretically study the behaviour of these fundamental processes inside an unbounded medium exhibiting a vanishingly small refractive index, i.e., a near-zero-index (NZI) host medium. We present a generalized framework to study these processes and find that the spatial dimension of the NZI medium has profound effects on the nature of the fundamental radiative processes. Our formalism highlights the role of the number of available optical modes as well as the ability of an emitter to couple to these modes as a function of the dimension and the class of NZI media. We demonstrate that the fundamental radiative processes are inhibited in 3D homogeneous lossless zero index materials but may be strongly enhanced in a zero index medium of reduced dimensionality. Our findings have implications in thermal, nonlinear and quantum optics as well as in designing quantum metamaterials at optical or microwave frequencies.

physics.optics↗

arXiv2018

Polaritonic hybrid-epsilon-near-zero modes: engineering strong optoelectronic coupling and dispersion in doped cadmium oxide bilayers

Polaritonic materials that support epsilon-near-zero (ENZ) modes offer the opportunity to design light-matter interactions at the nanoscale through phenomena like resonant perfect absorption and extreme sub-wavelength light concentration. To date, the utility of ENZ modes is limited in propagating polaritonic systems by a relatively flat spectral dispersion, which gives ENZ modes small group velocities and short propagation lengths. Here we overcome this constraint by coupling ENZ modes to surface plasmon polariton (SPP) modes in doped cadmium oxide ENZ-on-SPP bilayers. What results is a strongly coupled hybrid mode, characterized by strong anti-crossing and a large spectral splitting on the order of 1/3 of the mode frequency. The resonant frequencies, dispersion, and coupling of these polaritonic-hybrid-epsilon-near-zero (PH-ENZ) modes are controlled by tailoring the modal oscillator strength and the ENZ-SPP spectral overlap, which can potentially be utilized for actively tunable strong coupling at the nanoscale. PH-ENZ modes ultimately leverage the most desirable characteristics of both ENZ and SPP modes through simultaneous strong interior field confinement and mode propagation.

cond-mat.mes-hall↗

arXiv2017

Young's Double-Slit, Invisible Objects and the Role of Noise in an Optical Epsilon-near-Zero Experiment

Epsilon-near-zero (ENZ) media disclose the peculiarities of electrodynamics in the limit of infinite wavelength but non-zero frequency for experiments and applications. Theory suggests that wave interaction with obstacles and disturbances dramatically changes in this domain. To investigate the optics of those effects we fabricated a nanostructured 2D optical ENZ multilayer waveguide that is probed with wavelength-tuned laser light via a nanoscale wave launch configuration. In this experimental framework we directly optically measure wave propagation and diffraction in a realistic system with the level and scale of imperfection that is typical in nanooptics. As we scan the wavelength from 1.0 $μ$m to 1.7 $μ$m, we approach the ENZ regime, and observe the interference pattern of a micro-scale Young's double slit to steeply diverge. By evaluating multiple diffraction orders we experimentally determine the effective refractive index $n_{eff}$ and its zero-crossing as an intrinsic measured reference, which is in agreement with theoretical predictions. We further verify that the double-slit and specifically placed scattering objects become gradually invisible when approaching the ENZ regime. We also observe that light-matter-interaction intensifies towards ENZ and quantify how speckle noise, caused by tiny random imperfections, increasingly dominates the optical response and blue-shifts the cut-off frequency.

physics.optics↗

arXiv2017

Optical emission near a high-impedance mirror

Solid state light emitters rely on metallic contacts with high sheet-conductivity for effective charge injection. Unfortunately, such contacts also support surface plasmon polariton (SPP) excitations that dissipate optical energy into the metal and limit the external quantum efficiency. Here, inspired by the concept of radio-frequency (RF) high-impedance surfaces and their use in conformal antennas we illustrate how electrodes can be nanopatterned to simultaneously provide a high DC electrical conductivity and high-impedance at optical frequencies. Such electrodes do not support SPPs across the visible spectrum and greatly suppress dissipative losses while facilitating a desirable Lambertian emission profile. We verify this concept by studying the emission enhancement and photoluminescence lifetime for a dye emitter layer deposited on the electrodes.

physics.optics↗

arXiv2017

Ultra-light Å-scale Optimal Optical Reflectors

High-reflectance in many state-of-the-art optical devices is achieved with noble metals. However, metals are limited by losses, and for certain applications, by their high mass density. Using a combination of ab initio and optical transfer matrix calculations, we evaluate the behavior of graphene-based Å-scale metamaterials and find that they could act as nearly-perfect reflectors in the mid-long wave infrared (IR) range. The low density of states for electron-phonon scattering and interband excitations leads to unprecedented optical properties for graphene heterostructures, especially alternating atomic layers of graphene and hexagonal boron nitride, at wavelengths greater than $10~μ$m. At these wavelengths, these materials exhibit reflectivities exceeding 99.7% at a fraction of the weight of noble metals, as well as plasmonic mode confinement and quality factors that are greater by an order of magnitude compared to noble metals. These findings hold promise for ultra-compact optical components and waveguides for mid-IR applications. Moreover, unlike metals, the photonic properties of these heterostructures could be actively tuned via chemical and/or electrostatic doping, providing exciting possibilities for tunable devices.

cond-mat.mes-hall↗

arXiv2016

Dispersion Synthesis with Multi-Ordered Metatronic Filters

We propose the synthesis of frequency dispersion of layered structures based on the design of multi-ordered optical filters using nanocircuit concepts. Following the well known insertion loss method commonly employed in the design of electronic and microwave filters, here we theoretically show how we can tailor optical dispersion as we carry out the design of several low-pass, high-pass, band-pass and band-stop filters of different order with a (maximally flat) Butterworth response. We numerically demonstrate that these filters can be designed by combining metasurfaces made of one or two materials acting as optical lumped elements, and, hence, leading to simple, easy to apply, design rules. The theoretical results based on this circuital approach are validated with full-wave numerical simulations. The results presented here can be extended to virtually any frequency dispersion synthesis, filter design procedure and/or functionality, thus opening up exciting possibilities in the design of composite materials with on-demand dispersion and high-performance and compact optical filters using one or two materials.

physics.optics↗

arXiv2015

Nonradiating and radiating modes excited by quantum emitters in open epsilon-near-zero cavities

Controlling the emission and interaction properties of quantum emitters (QEs) embedded within an optical cavity is a key technique in engineering light-matter interactions at the nanoscale, as well as in the development of quantum information processing. State-of-the-art optical cavities are based on high Q photonics crystals and dielectric resonators. However, wealthier responses might be attainable with cavities carved in more exotic materials. Here, we theoretically investigate the emission and interaction properties of QEs embedded in open epsilon-near-zero (ENZ) cavities. Using analytical methods and numerical simulations, it is demonstrated that open ENZ cavities present the unique property of supporting nonradiating modes independently of the geometry of the external boundary of the cavity (shape, size, topology...). Moreover, the possibility of switching between radiating and nonradiating modes enables a dynamic control of both the emission by, and the interaction between, QEs. These phenomena provide unprecedented degrees of freedom in controlling and trapping fields within optical cavities, as well as in the design of cavity opto- and acousto-mechanical systems.

physics.optics↗

arXiv2015

Plasmonics without negative dielectrics

Plasmonic phenomena are exhibited in light-matter interaction involving materials whose real parts of permittivity functions attain negative values at operating wavelengths. However, such materials usually suffer from dissipative losses, thus limiting the performance of plasmon-based optical devices. Here, we utilize an alternative methodology that mimics a variety of plasmonic phenomena by exploiting the well-known structural dispersion of electromagnetic modes in bounded guided-wave structures filled with only materials with positive permittivity. A key issue in design of such structures is prevention of mode coupling, which can be achieved by implementing thin metallic wires at proper interfaces. This method, which is more suitable for lower frequencies, allows designers to employ conventional dielectrics and highly conductive metals for which the loss is low at these frequencies, while achieving plasmonic features. We demonstrate, numerically and analytically, that this platform can provide surface plasmon polaritons, local plasmonic resonance, plasmonic cloaking and epsilon-near-zero (ENZ)-based tunneling using conventional positive-dielectric materials.

cond-mat.mtrl-sci↗

arXiv2015

Geometry-Invariant Resonant Cavities

Resonant cavities are one of the basic building blocks in various disciplines of science and technology, with numerous applications ranging from abstract theoretical modeling to everyday life devices. The eigenfrequencies of conventional cavities are a function of its geometry, and, thus, the size and shape of a resonant cavity is selected in order to operate at a specific frequency. Here, we demonstrate theoretically the existence of geometry-invariant resonant cavities, i.e., resonators whose eigenfrequency is invariant with respect to geometrical deformations. This effect is obtained by exploiting the unusual properties of zero-index metamaterials, which enable decoupling of the time and spatial field variations. This new class of resonators may inspire alternative design concepts, and it might lead to the first generation of deformable resonant devices.

physics.optics↗

arXiv2015

Lateral forces on nanoparticles near a surface under circularly-polarized plane-wave illumination

Optical forces allow manipulation of small particles and control of nanophotonic structures with light beams. Here, we describe a counter-intuitive lateral optical force acting on particles placed above a substrate, under uniform plane wave illumination without any field gradients. We show that under circularly-polarized illumination, nanoparticles experience a lateral force as a result of dipolar, spin-sensitive scattering, with a magnitude comparable to other optical forces. To this end, we rigorously calculate the force experienced by a circularly polarized dipole radiating above a surface. Unlike for linearly-polarized dipoles, force components parallel to the surface can exist, caused by the recoil of unidirectional guided modes excited at the surface and/or by dipole-dipole interactions with the induced image dipole. These results were presented and discussed in conferences [1] and [2].

physics.optics↗

arXiv2015

$\mathcal{PT}$-Symmetry-Induced Wave Confinement and Guiding in Epsilon-Near-Zero Metamaterials

Inspired by the parity-time symmetry concept, we show that a judicious spatial modulation of gain and loss in epsilon-near-zero metamaterials can induce the propagation of exponentially-bound interface modes characterized by zero attenuation. With specific reference to a bi-layer configuration, via analytical studies and parameterization of the dispersion equation, we show that this waveguiding mechanism can be sustained in the presence of moderate gain/loss levels, and it becomes leaky (i.e., radiative) below a gain/loss threshold. Moreover, we explore a possible rod-based metamaterial implementation, based on realistic material constituents, which captures the essential features of the waveguiding mechanism, in good agreement with our theoretical predictions. Our results may open up new possibilities for the design of optical devices and reconfigurable nanophotonics platforms.

physics.optics↗

arXiv2014

"Static" Optics

In recent years, the concept of metamaterials has offered platforms for unconventional tailoring and manipulation of the light-matter interaction. Here, we explore the notion of "static optics", in which the electricity and magnetism are decoupled and their fields are statically distributed, while being temporally dynamic. This occurs when both the relative effective permittivity and permeability attain near-zero values at an operating frequency. We theoretically investigate some of the unprecedented wave features, such as unusual radiation characteristics of an emitter embedded in such epsilon-and-mu-near-zero (EMNZ) media. Using such static-optical medium one might in principle "open up" and "stretch" the space, and have regions behaving electromagnetically as "single points" despite being electrically large. We suggest a possible design for implementation of such structures using a single dielectric rod inserted in a waveguide operating near its cut-off frequency, providing the possibility of having electrically large "empty" volumes to behave as EMNZ static-optical media.

physics.optics↗

arXiv2014

All-Passive Nonreciprocal Metasurface

We introduce a systematic approach to design all-passive subwavelength high performance metasurfaces that exhibit nonreciprocal properties and achieve wave-flow isolation. Moreover we build upon those findings and propose a new paradigm for a quasi-2D metasurface that mimic the nonreciprocal property of Faraday rotation without using any magnetic or electric biasing. We envision that the proposed approaches may serve as a building block for all-passive time-reversal symmetry breaking with potential applications for future nonreciprocal systems and devices.

physics.optics↗

arXiv2014

Digital Metamaterials

Balancing the complexity and the simplicity has played an important role in the development of many fields in science and engineering. As Albert Einstein was once quoted to say: 'Everything must be made as simple as possible, but not one bit simpler'. The simplicity of an idea brings versatility of that idea into a broader domain, while its complexity describes the foundation upon which the idea stands. One of the well-known and powerful examples of such balance is in the Boolean algebra and its impact on the birth of digital electronics and digital information age. The simplicity of using only two numbers of '0' and '1' in describing an arbitrary quantity made the fields of digital electronics and digital signal processing powerful and ubiquitous. Here, inspired by the simplicity of digital electrical systems we propose to apply an analogous idea to the field of metamaterials, namely, to develop the notion of digital metamaterials. Specifically, we investigate how one can synthesize an electromagnetic metamaterial with desired materials parameters, e.g., with a desired permittivity, using only two elemental materials, which we call 'metamaterial bits' with two distinct permittivity functions, as building blocks. We demonstrate, analytically and numerically, how proper spatial mixtures of such metamaterial bits leads to 'metamaterial bytes' with material parameters different from the parameters of metamaterial bits. We also explore the role of relative spatial orders of such digital materials bits in constructing different parameters for the digital material bytes. We then apply this methodology to several design examples such as flat graded-index digital lens, cylindrical scatterers, digital constructs for epsilon-near-zero (ENZ) supercoupling, and digital hyperlens, highlighting the power and simplicity of this methodology and algorithm.

cond-mat.mtrl-sci↗