arXiv subjects

Nader Engheta

Publications and source records attributed to Nader Engheta.

At least 37 records · Page 2Linked to original sources

arXiv2022

Programmable wave-based analog computing machine: a metastructure that designs metastructures

The ability to perform mathematical computations using metastructures is an emergent paradigm that carries the potential of wave-based analog computing to the realm of near-speed-of-light, low-loss, compact devices. We theoretically introduce and experimentally verify the concept of a reconfigurable metastructure that performs analog complex mathematical computations using electromagnetic waves. Reconfigurable, RF-based components endow our device with the ability to perform stationary and non-stationary iterative algorithms. After demonstrating matrix inversion (stationary problem), we use the machine to tackle two major non-stationary problems: root finding with Newton's method and inverse design (constrained optimization) via the Lagrange multiplier method. The platform enables possible avenues for wave-based, analog computations for general linear algebraic problems and beyond in compact, ultrafast, and parallelized ways.

physics.app-ph↗

arXiv2022

Multiple actions of time-resolved short-pulsed metamaterials

Recently, it has been shown that temporal metamaterials based on impulsive modulations of the constitutive parameters (of duration much smaller than a characteristic electromagnetic timescale) may exhibit a nonlocal response that can be harnessed so as to perform elementary analog computing on an impinging wavepacket. These short-pulsed metamaterials can be viewed as the temporal analog of conventional (spatial) metasurfaces. Here, inspired by the analogy with cascaded metasurfaces, we leverage this concept and take it one step further, by showing that short-pulsed metamaterials can be utilized as elementary bricks for more complex computations. To this aim, we develop a simple, approximate approach to systematically model the multiple actions of time-resolved short-pulsed metamaterials. Via a number of representative examples, we illustrate the computational capabilities enabled by this approach, in terms of simple and composed operations, and validate it against a rigorous numerical solution. Our results indicate that the temporal dimension may provide new degrees of freedom and design approaches in the emerging field of computational metamaterials, in addition or as an alternative to conventional spatially variant platforms.

physics.optics↗

arXiv2022

Reconfigurable nonlinear optical element using tunable couplers and inverse-designed structure

In recent years, wave-based analog computing has been at the center of attention for providing ultra-fast and power-efficient signal processing enabled by wave propagation through artificially engineered structures. Building on these structures, various proposals have been put forward for performing computations with waves. Most of these proposals have been aimed at linear operations, such as vector-matrix multiplications. The weak and hardly controllable nonlinear response of electromagnetic materials imposes challenges in the design of wave-based structures for performing nonlinear operations. In the present work, first, by using the method of inverse design we propose a three-port device, which consists of a combination of linear and Kerr nonlinear materials, exhibiting the desired power-dependent transmission properties. Then, combining a proper arrangement of such devices with a collection of Mach-Zehnder interferometers (MZIs), we propose a reconfigurable nonlinear optical architecture capable of implementing a variety of nonlinear functions of the input signal. The proposed device may pave the way for wave-based reconfigurable nonlinear signal processing that can be combined with linear networks for full-fledged wave-based analog computing.

physics.optics↗

arXiv2022

Inverse-designed Metastructures Together with Reconfigurable Couplers to Compute Forward Scattering

Wave-based analog computing in the forms of inverse-designed metastructures and the meshes of Mach-Zehnder interferometers (MZI) have recently received considerable attention due to their capability in emulating linear operators, performing vector-matrix multiplication, inverting matrices, and solving integral and differential equations, via electromagnetic wave interaction and manipulation in such structures. Here, we combine these two platforms to propose a wave-based metadevice that can compute scattered fields in electromagnetic forward scattering problems. The proposed device consists of two sub-systems: a set of reconfigurable couplers with a proper feedback system and an inverse-designed inhomogeneous material block. The first sub-system computes the magnitude and phase of the dipole polarization induced in the scatterers when illuminated with a given incident wave (matrix inversion). The second sub-system computes the magnitude and phase of the scattered fields at given detection points (vector-matrix multiplication). We discuss the functionality of this metadevice, and through several examples, we theoretically evaluate its performance by comparing the simulation results of this device with full-wave numerical simulations and numerically evaluated matrix inversion. We also highlight that since the first section is reconfigurable, the proposed device can be used for different permittivity distributions of the scatterer and different incident excitations without changing the inverse-designed section. Our proposed device may provide a versatile platform for rapid computation in various scattering scenarios.

physics.optics↗

arXiv2022

Electrically switchable Casimir forces using transparent conductive oxides

Casimir forces between charge-neutral bodies originate from quantum vacuum fluctuations of electromagnetic fields, which exhibit a critical dependence on material's electromagnetic properties. Over the years, in-situ modulation of material's optical properties has been enabled through various means and has been widely exploited in a plethora of applications such as electro-optical modulation, transient color generation, bio- or chemical sensing, etc. Yet Casimir force modulation has been hindered by difficulty in achieving high modulation signals due to the broadband nature of the Casimir interaction. Here we propose and investigate two configurations that allow for in-situ modulation of Casimir forces through electrical gating of a metal-insulator-semiconductor (MIS) junction comprised of transparent conductive oxide (TCO) materials. By switching the gate voltage on and off, a force modulation of > 400 pN is predicted due to substantive charge carrier accumulation in the TCO layer, which can be easily measured using state-of-the-art force measurement techniques in an atomic force microscope (AFM). We further examine the influence of the oxide layer thickness on the force modulation, suggesting the importance of the fine control of the oxide layer deposition. Our work provides a promising pathway for modulating the Casimir effect in-situ with experimentally measurable force contrast.

physics.app-ph↗

arXiv2022

Mathematical Operations and Equation Solving with Reconfigurable Metadevices

Performing analog computations with metastructures is an emerging wave-based paradigm for solving mathematical problems. For such devices, one major challenge is their reconfigurability, especially without the need for a priori mathematical computations or computationally-intensive optimization. Their equation-solving capabilities are applied only to matrices with special spectral (eigenvalue) distribution. Here we report the theory and design of wave-based metastructures using tunable elements capable of solving integral/differential equations in a fully-reconfigurable fashion. We consider two architectures: the Miller architecture, which requires the singular-value decomposition, and an alternative intuitive direct-complex-matrix (DCM) architecture introduced here, which does not require a priori mathematical decomposition. As examples, we demonstrate, using system-level simulation tools, the solutions of integral and differential equations. We then expand the matrix inverting capabilities of both architectures toward evaluating the generalized Moore-Penrose matrix inversion. Therefore, we provide evidence that metadevices can implement generalized matrix inversions and act as the basis for the gradient descent method for solutions to a wide variety of problems. Finally, a general upper bound of the solution convergence time reveals the rich potential that such metadevices can offer for stationary iterative schemes.

physics.app-ph↗

arXiv2022

The Effect of Epsilon-Near-Zero (ENZ) Modes on the Casimir Interaction between Ultrathin Films

Vacuum fluctuation-induced interactions between macroscopic metallic objects result in an attractive force between them, a phenomenon known as the Casimir effect. This force is the result of both plasmonic and photonic modes. For very thin films, field penetration through the films will modify the allowed modes. Here, we investigate the Casimir interaction between two ultrathin films from the perspective of the force distribution over real frequencies for the first time and find pronounced repulsive contributions to the force due to the highly confined and nearly dispersion-free epsilon-near-zero (ENZ) modes that only exist in ultrathin films. These contributions are found to persistently occur around the ENZ frequency of the film and are irrespective of the inter-film separation. We further associate the ENZ modes with a striking thickness dependence in the averaged force density for conductive thin films, a metric signifying a thin-film's acceleration due to Casimir effect. Our results shed light on the role of the unique vacuum fluctuation modes existing in ultrathin ENZ materials, which may offer significant potential for engineering the motion of objects in nanomechanical systems.

quant-ph↗

arXiv2022

Radiative energy bandgap of nanostructures coupled with quantum emitters around the epsilon-near-zero (ENZ) frequency

Epsilon-near-zero (ENZ) materials have been demonstrated to exhibit unique electromagnetic properties. Here we propose the concept of radiative energy bandgap for an ENZ nanoparticle coupled with a quantum emitter (QE). The radiative emission of the coupled QE-nanoparticle can be significantly suppressed around the ENZ frequency and substantially enhanced otherwise, yielding an effective energy bandgap for radiation. This suppression is effectively invariant with respect to the particle size and is therefore an intrinsic property of the ENZ material. Our concept also heralds an alternative pathway to quench the emission from a QE, which may find potential application in quantum information storage.

physics.optics↗

arXiv2022

Solving integral equations in free-space with inverse-designed ultrathin optical metagratings

As standard microelectronic technology approaches fundamental limitations in speed and power consumption, novel computing strategies are strongly needed. Analog optical computing enables processing large amounts of data at a negligible energy cost and high speeds. Based on these principles, ultrathin optical metasurfaces have been recently explored to process large images in real-time, in particular for edge detection. By incorporating feedback, it has also been recently shown that metamaterials can be tailored to solve complex mathematical problems in the analog domain, although these efforts have so far been limited to guided-wave systems and bulky setups. Here, we present an ultrathin Si metasurface-based platform for analog computing that is able to solve Fredholm integral equations of the second kind using free-space visible radiation. A Si-based metagrating was inverse-designed to implement the scattering matrix synthesizing a prescribed Kernel corresponding to the mathematical problem of interest. Next, a semi-transparent mirror was incorporated into the sample to provide adequate feedback and thus perform the required Neumann series, solving the corresponding equation in the analog domain at the speed of light. Visible wavelength operation enables a highly compact, ultrathin device that can be interrogated from free-space, implying high processing speeds and the possibility of on-chip integration.

physics.optics↗

arXiv2021

Engineering Casimir interactions with epsilon-near-zero materials

In this paper we theoretically demonstrate the tunability of the Casimir force both in sign and magnitude between parallel plates coated with dispersive materials. We show that this force, existing between uncharged plates, can be tuned by carefully choosing the value of the plasma frequency (i.e., the epsilon-near-zero frequency) of the coating in the neighborhood of the resonance frequency of the cavity. The coating layer enables a continuous variation of the force between four limiting values when a coating is placed on each plate. We explore the consequences of such variation when pairs of electric and magnetic conductors (i.e. low and high impedance surfaces) are used as substrates on either side, showing that this continuous variation results in changes in the sign of the force, leading to both stable and unstable conditions, which could find interesting potential applications in nanomechanics including nanoparticle tweezing.

quant-ph↗

arXiv2021

Momentum considerations inside near-zero index materials

Near-zero-index (NZI) materials, i.e. materials having a phase refractive index close to zero, are known to enhance or inhibit light-matter interactions. Most theoretical derivations of fundamental radiative processes rely on energetic considerations and detailed balance equations, but not on momentum considerations. Because momentum exchange should also be incorporated into theoretical models, we investigate momentum inside the three categories of NZI materials, i.e. inside epsilon-and-mu near-zero (EMNZ), epsilon-near-zero (ENZ) and mu-near-zero (MNZ) materials. In the context of Abraham-Minkowski debate in dispersive materials, we show that Minkowski-canonical momentum of light is zero inside all categories of NZI materials while Abraham-kinetic momentum of light is zero in ENZ and MNZ materials but nonzero inside EMNZ materials. We theoretically demonstrate that momentum recoil, transfer momentum from the field to the atom and Doppler shift are inhibited in NZI materials. Fundamental radiative processes inhibition is also explained due to those momentum considerations inside three-dimensional NZI materials. Lastly, absence of diffraction pattern in slits experiments is seen as a consequence of zero Minkowski momentum. Those findings are appealing for a better understanding of fundamental light-matter interactions at the nanoscale as well as for lasing applications.

physics.optics↗

arXiv2021

Nonreciprocal ENZ-Dielectric Bilayers: Enhancement of Nonreciprocity from a Nonlinear Transparent Conducting Oxide Thin Film at Epsilon-Near-Zero (ENZ) Frequency

We envision the use of an indium tin oxide (ITO) thin film as part of a bi-layered silicon-photonics subwavelength device to boost nonlinearity-assisted all-passive nonreciprocal behavior. The asymmetric p-polarized oblique excitation of a mode near the epsilon-near-zero (ENZ) frequency, with highly-confined and enhanced normal electric field component and large absorption, allows to harness ITO's strong ultrafast nonlinear response for the generation of a notable nonreciprocal performance in the two-port element. Though limited by loss, we find the device's optimal operational point and the maximum nonreciprocal transmittance ratio attainable vs. light intensity -- including an apparent upper bound slightly over 2 --, and we perform exhaustive numerical simulations considering nonlinear processes of both anharmonic and thermal nature that validate our predictions, including steady-state and pulsed-laser excitations.

physics.optics↗

arXiv2021

Temporal metamaterials with gain and loss

Manipulation of wave-matter interactions in systems with loss and gain have opened new mechanisms to control wave propagation at will. Metamaterials and metasurfaces having spatially inhomogeneous loss and gain have been studied in the past few years by exploiting parity-time (PT) symmetry concepts inspired from quantum-physics. In this work we theoretically study the control of light-matter interactions in spatially unbounded metamaterials having a time-modulated permittivity whose imaginary part is temporally modulated to induce loss and gain, while the real part stays unchanged. We show both numerically and theoretically how such temporally modulated multistepped metamaterials with loss and gain can be equivalent to a temporal effective metamaterial having an effective permittivity modelled by a step function in time. Interestingly, it is shown how the amplitude of a monochromatic electromagnetic wave traveling inside such temporal metamaterials can experience spatiotemporal decay or amplification depending on the values of loss and gain added into the system, while its wavenumber is preserved. We envision that our findings may open new avenues in exploration of potential applications of temporal metamaterials in signal amplification and loss mitigation.

physics.optics↗

arXiv2021

Static-to-dynamic field conversion with time-varying media

In this Letter, we theoretically demonstrate that a uniform static electric field distribution can be partially converted to radiation fields when a portion of the medium undergoes a temporal change of its permittivity. An in-depth theoretical investigation of this phenomenon is developed for a dielectric block with a step-like temporal change located inside a waveguide charged with a DC voltage source. Closed analytical expressions are derived for the radiated electric and magnetic fields. The exchange of energy between the electrostatic and electromagnetic fields is discussed. The reconciliation between the seemingly contradictory temporal and spatial boundary conditions for the electric and magnetic fields at the interface of the time-varying dielectric block is analyzed and elucidated. Our findings may provide an alternative solution for generating electromagnetic radiation based on time-varying media.

physics.optics↗

arXiv2021

Spatiotemporal Isotropic-to-Anisotropic Meta-Atoms

Metamaterials and metasurfaces are designed by periodically arranged subwavelength geometries, allowing a tailored manipulation of the electromagnetic response of matter. Here, we exploit temporal variations of permittivity inside subwavelength geometries to propose the concept of spatiotemporal meta-atoms having time-dependent properties. We exploit isotropic-to-anisotropic temporal boundaries within spatially subwavelength regions where their permittivity is rapidly changed in time. In so doing, it is shown how resulting scattered waves travel in directions that are different from the direction of the impinging wave, and depend on the values of the chosen anisotropic permittivity tensor. To provide a full physical insight of their performance, multiple scenarios are studied numerically such as the effect of using different values of permittivity tensor, different geometries of the spatiotemporal meta-atom and time duration of the induced isotropic-to-anisotropic temporal boundary. The intrinsic asymmetric response of the proposed spatiotemporal meta-atoms is also studied demonstrating, both theoretically and numerically, its potential for an at-will manipulation of scattered waves in real time. These results may open new paradigms for controlling wave-matter interactions and may pave the way for the next generation of metamaterials and metasurfaces by unleashing their potential using four-dimensional (4D) unit cells.

physics.optics↗

arXiv2021

Nonreciprocal guided waves in presence of swift electron beams

Breaking the reciprocity of electromagnetic interactions is of paramount importance in photonic and microwave technologies, as it enables unidirectional power flows and other unique electromagnetic phenomena. Here we explore a method to break the reciprocity of electromagnetic guided waves utilizing an electron beam with a constant velocity. By introducing an effective dynamic conductivity for the beam, we theoretically demonstrate how nonreciprocal guided waves and a one-way propagating regime can be achieved through the interaction of swift electrons with electromagnetic waves in two-dimensional (2D) parallel-plate and three-dimensional (3D) circular-cylindrical waveguides. Unlike the conventional electron beam structures such as traveling wave tubes and electron accelerators, here the goal is neither to generate and/or amplify the wave nor to accelerate electrons. Instead, we study the salient features of nonreciprocity and unidirectionality of guided waves in such structures. The relevant electromagnetic properties such as the modal dispersion, the field distributions, the operating frequency range, and the nonreciprocity strength and its dependence on the electron velocity and number density are presented and discussed. Moreover, we compare the dispersion characteristics of waves in such structures with some electric-current-based scenarios in materials reported earlier. This broadband tunable magnet-free method offers a unique opportunity to have a switchable strong nonreciprocal response in optoelectronics, nanophotonics, and THz systems.

physics.optics↗

arXiv2021

Time-Varying Materials in Presence of Dispersion: Plane-Wave Propagation in a Lorentzian Medium with Temporal Discontinuity

We study the problem of a temporal discontinuity in the permittivity of an unbounded medium with Lorentzian dispersion. More specifically, we tackle the situation in which a monochromatic plane wave forward-travelling in a (generally lossy) Lorentzian-like medium scatters from the temporal "half-space interface" that results from an abrupt temporal change in its plasma frequency (while keeping its resonance frequency constant). In order to achieve momentum preservation across the temporal discontinuity, we show how, unlike in the well-known problem of a nondispersive discontinuity, the second-order nature of the dielectric function now gives rise to two shifted frequencies. As a consequence, whereas in the nondispersive scenario the continuity of the electric displacement D and the magnetic induction B suffice to find the amplitude of the new forward and backward wave, we now need two extra temporal boundary conditions. That is, two forward and two backward plane waves are now instantaneously generated in response to a forward-only plane wave. We also include a transmission-line equivalent with lumped circuit elements that describes the dispersive time-discontinuous scenario under consideration.

physics.optics↗

arXiv2021

Temporal Brewster angle

Controlling amplitude, phase and polarization of electromagnetic waves is key for a full manipulation of wave-matter interactions. The Brewster angle is one of the important features in this context. Here, we exploit metamaterial concepts with a time-modulated permittivity to propose the temporal equivalent of the spatial Brewster angle, a concept we call temporal Brewster angle. We consider temporal boundaries (as the temporal equivalent of the spatial boundaries between two media) by rapidly changing the permittivity of the medium, where a wave travels, from isotropic to an anisotropic permittivity tensor. It is theoretically shown that when the incidence angle coincides with that of the temporal Brewster angle a forward (temporal transmission) wave is produced while the backward (temporal reflection) is eliminated. We provide a closed-form analytical expression of the temporal Brewster angle and demonstrate its performance both theoretically and numerically. Our findings may provide a fresh view on how to control electromagnetic wave propagation and wave-matter interactions in real time using temporal metamaterials.

physics.optics↗