arXiv subjects

Nathalie P. de Leon

Publications and source records attributed to Nathalie P. de Leon.

At least 37 records · Page 2Linked to original sources

arXiv2024

Methods for color center preserving hydrogen-termination of diamond

Chemical functionalization of diamond surfaces by hydrogen is an important method for controlling the charge state of near-surface fluorescent color centers, an essential process in fabricating devices such as diamond field-effect transistors and chemical sensors, and a required first step for realizing families of more complex terminations through subsequent chemical processing. In all these cases, termination is typically achieved using hydrogen plasma sources which can etch or damage the diamond as well as deposited materials or embedded colour centers. This work explores alternative methods for lower-damage hydrogenation of diamond surfaces, specifically the annealing of diamond samples in high-purity, non-explosive mixtures of nitrogen and hydrogen gas, and the exposure of samples to microwave hydrogen plasmas in the absence of intentional stage heating. The effectiveness of these methods are characterized by x-ray photoelectron spectroscopy, and comparison of the results to density-functional modelling of the surface hydrogenation energetics implicates surface oxygen ligands as the primary factor limiting the termination quality of annealed samples. Finally, photoluminescence spectroscopy is used to verify that both the annealing and reduced sample temperature plasma methods are non-destructive to near-surface ensembles of nitrogen-vacancy centers, in stark contrast to plasma treatments which use heated sample stages.

cond-mat.mtrl-sci↗

arXiv2024

Spin-photon entanglement of a single Er$^{3+}$ ion in the telecom band

Long-distance quantum communication using quantum repeaters is an enabling technology for secure communication, distributed quantum computing and quantum-enhanced sensing and metrology. As a building block of quantum repeaters, spin-photon entanglement has been demonstrated with both atomic and solid-state qubits. However, previously demonstrated qubits with long spin coherence do not directly emit photons into the low-loss telecom band that is needed for long-distance communication. Here, we demonstrate spin-photon entanglement using a single Er$^{3+}$ ion in a solid-state crystal, integrated into a silicon nanophotonic circuit. Direct emission into the telecom band enables an entanglement rate of 1.48 Hz over 15.6 km of optical fiber, with a fidelity of 73(3)$\%$. This opens the door to large-scale quantum networks based on scalable nanophotonic devices and many spectrally multiplexed Er$^{3+}$ ions.

quant-ph↗

arXiv2024

New opportunities in condensed matter physics for nanoscale quantum sensors

Nitrogen vacancy (NV) centre quantum sensors provide unique opportunities in studying condensed matter systems: they are quantitative, noninvasive, physically robust, offer nanoscale resolution, and may be used across a wide range of temperatures. These properties have been exploited in recent years to obtain nanoscale resolution measurements of static magnetic fields arising from spin order and current flow in condensed matter systems. Compared with other nanoscale magnetic-field sensors, NV centres have the unique advantage that they can probe quantities that go beyond average magnetic fields. Leveraging techniques from magnetic resonance, NV centres can perform high precision noise sensing, and have given access to diverse systems, such as fluctuating electrical currents in simple metals and graphene, as well as magnetic dynamics in yttrium iron garnet. In this review we summarise unique opportunities in condensed matter sensing by focusing on the connections between specific NV measurements and previously established physical characteristics that are more readily understood in the condensed matter community, such as correlation functions and order parameters that are inaccessible by other techniques, and we describe the technical frontier enabled by NV centre sensing.

cond-mat.mes-hall↗

arXiv2023

Diamond Surface Functionalization via Visible Light-Driven C-H Activation for Nanoscale Quantum Sensing

Nitrogen-vacancy centers in diamond are a promising platform for nanoscale nuclear magnetic resonance sensing. Despite significant progress towards using NV centers to detect and localize nuclear spins down to the single spin level, NV-based spectroscopy of individual, intact, arbitrary target molecules remains elusive. NV molecular sensing requires that target molecules are immobilized within a few nanometers of NV centers with long spin coherence time. The inert nature of diamond typically requires harsh functionalization techniques such as thermal annealing or plasma processing, limiting the scope of functional groups that can be attached to the surface. Solution-phase chemical methods can be more readily generalized to install diverse functional groups, but they have not been widely explored for single-crystal diamond surfaces. Moreover, realizing shallow NV centers with long spin coherence times requires highly ordered single-crystal surfaces, and solution-phase functionalization has not yet been shown to be compatible with such demanding conditions. In this work, we report a versatile strategy to directly functionalize C-H bonds on single-crystal diamond surfaces under ambient conditions using visible light. This functionalization method is compatible with charge stable NV centers within 10 nm of the surface with spin coherence times comparable to the state of the art. As a proof of principle, we use shallow ensembles of NV centers to detect nuclear spins from functional groups attached to the surface. Our approach to surface functionalization based on visible light-driven C-H bond activation opens the door to deploying NV centers as a broad tool for chemical sensing and single-molecule spectroscopy.

cond-mat.mtrl-sci↗

arXiv2023

Strong Purcell enhancement of an optical magnetic dipole transition

Engineering the local density of states with nanophotonic structures is a powerful tool to control light-matter interactions via the Purcell effect. At optical frequencies, control over the electric field density of states is typically used to couple to and manipulate electric dipole transitions. However, it is also possible to engineer the magnetic density of states to control magnetic dipole transitions. In this work, we experimentally demonstrate the optical magnetic Purcell effect using a single rare earth ion coupled to a nanophotonic cavity. We engineer a new single photon emitter, Er$^{3+}$ in MgO, where the electric dipole decay rate is strongly suppressed by the cubic site symmetry, giving rise to a nearly pure magnetic dipole optical transition. This allows the unambiguous determination of a magnetic Purcell factor $P_m=1040 \pm 30$. We further extend this technique to realize a magnetic dipole spin-photon interface, performing optical spin initialization and readout of a single Er$^{3+}$ electron spin. This work demonstrates the fundamental equivalence of electric and magnetic density of states engineering, and provides a new tool for controlling light-matter interactions for a broader class of emitters.

physics.optics↗

arXiv2023

\emph{Ab initio} study of (100) diamond surface spins

Unpaired electronic spins at diamond surfaces are ubiquitous and can lead to excess magnetic noise. They have been observed in several studies to date, but their exact chemical nature is still unknown. We propose a simple model to explain the existence and chemical stability of surface spins associated with the $sp^3$ dangling bond on the (100) diamond surface using density functional theory. We find that the (111) facet, which is naturally generated at a step edge of (100) crystalline diamond surface, can sterically protect a spinful defect. Our study reveals a mechanism for annihilation of these surface spins upon annealing, consistent with recent experimental results. We also demonstrate that the Fermi-contact term in the hyperfine coupling is not negligible between the surface spins and the surrounding nuclear spins, and thus \textit{ab initio} simulation can be used to devise a sensing protocol where the surface spins act as reporter spins to sense nuclear spins on the surface.

quant-ph↗

arXiv2023

Chemical profiles of the oxides on tantalum in state of the art superconducting circuits

Over the past decades, superconducting qubits have emerged as one of the leading hardware platforms for realizing a quantum processor. Consequently, researchers have made significant effort to understand the loss channels that limit the coherence times of superconducting qubits. A major source of loss has been attributed to two level systems that are present at the material interfaces. We recently showed that replacing the metal in the capacitor of a transmon with tantalum yields record relaxation and coherence times for superconducting qubits, motivating a detailed study of the tantalum surface. In this work, we study the chemical profile of the surface of tantalum films grown on c-plane sapphire using variable energy X-ray photoelectron spectroscopy (VEXPS). We identify the different oxidation states of tantalum that are present in the native oxide resulting from exposure to air, and we measure their distribution through the depth of the film. Furthermore, we show how the volume and depth distribution of these tantalum oxidation states can be altered by various chemical treatments. By correlating these measurements with detailed measurements of quantum devices, we can improve our understanding of the microscopic device losses.

cond-mat.mtrl-sci↗

arXiv2023

Disentangling Losses in Tantalum Superconducting Circuits

Superconducting qubits are a leading system for realizing large scale quantum processors, but overall gate fidelities suffer from coherence times limited by microwave dielectric loss. Recently discovered tantalum-based qubits exhibit record lifetimes exceeding 0.3 ms. Here we perform systematic, detailed measurements of superconducting tantalum resonators in order to disentangle sources of loss that limit state-of-the-art tantalum devices. By studying the dependence of loss on temperature, microwave photon number, and device geometry, we quantify materials-related losses and observe that the losses are dominated by several types of saturable two level systems (TLSs), with evidence that both surface and bulk related TLSs contribute to loss. Moreover, we show that surface TLSs can be altered with chemical processing. With four different surface conditions, we quantitatively extract the linear absorption associated with different surface TLS sources. Finally, we quantify the impact of the chemical processing at single photon powers, the relevant conditions for qubit device performance. In this regime we measure resonators with internal quality factors ranging from 5 to 15 x 10^6, comparable to the best qubits reported. In these devices the surface and bulk TLS contributions to loss are comparable, showing that systematic improvements in materials on both fronts will be necessary to improve qubit coherence further.

quant-ph↗

arXiv2023

Indistinguishable telecom band photons from a single erbium ion in the solid state

Atomic defects in the solid state are a key component of quantum repeater networks for long-distance quantum communication. Recently, there has been significant interest in rare earth ions, in particular Er$^{3+}$ for its telecom-band optical transition, but their application has been hampered by optical spectral diffusion precluding indistinguishable single photon generation. In this work we implant Er$^{3+}$ into CaWO$_4$, a material that combines a non-polar site symmetry, low decoherence from nuclear spins, and is free of background rare earth ions, to realize significantly reduced optical spectral diffusion. For shallow implanted ions coupled to nanophotonic cavities with large Purcell factor, we observe single-scan optical linewidths of 150 kHz and long-term spectral diffusion of 63 kHz, both close to the Purcell-enhanced radiative linewidth of 21 kHz. This enables the observation of Hong-Ou-Mandel interference between successively emitted photons with high visibility, measured after a 36 km delay line. We also observe spin relaxation times $T_1$ = 3.7 s and $T_2$ > 200 $μ$s, with the latter limited by paramagnetic impurities in the crystal instead of nuclear spins. This represents a significant step towards the construction of telecom-band quantum repeater networks with single Er$^{3+}$ ions.

quant-ph↗

arXiv2022

Hybrid Integration of GaP Photonic Crystal Cavities with Silicon-Vacancy Centers in Diamond by Stamp-Transfer

Optically addressable solid-state defects are emerging as one of the most promising qubit platforms for quantum networks. Maximizing photon-defect interaction by nanophotonic cavity coupling is key to network efficiency. We demonstrate fabrication of gallium phosphide 1-D photonic crystal waveguide cavities on a silicon oxide carrier and subsequent integration with implanted silicon-vacancy (SiV) centers in diamond using a stamp-transfer technique. The stamping process avoids diamond etching and allows fine-tuning of the cavities prior to integration. After transfer to diamond, we measure cavity quality factors ($Q$) of up to 8900 and perform resonant excitation of single SiV centers coupled to these cavities. For a cavity with $Q$ of 4100, we observe a three-fold lifetime reduction on-resonance, corresponding to a maximum potential cooperativity of $C = 2$. These results indicate promise for high photon-defect interaction in a platform which avoids fabrication of the quantum defect host crystal.

quant-ph↗

arXiv2022

Room-temperature photo-chromism of silicon vacancy centers in CVD diamond

The silicon-vacancy (SiV) center in diamond is typically found in three stable charge states, SiV0, SiV- and SiV2-, but studying the processes leading to their formation is challenging, especially at room temperature, due to their starkly different photo-luminescence rates. Here, we use confocal fluorescence microscopy to activate and probe charge interconversion between all three charge states under ambient conditions. In particular, we witness the formation of SiV0 via the two-step capture of diffusing, photo-generated holes, a process we expose both through direct SiV0 fluorescence measurements at low temperatures and confocal microscopy observations in the presence of externally applied electric fields. Further, we show that continuous red illumination induces the converse process, first transforming SiV0 into SiV-, then into SiV2-. Our results shed light on the charge dynamics of SiV and promise opportunities for nanoscale sensing and quantum information processing.

cond-mat.mtrl-sci↗

arXiv2022

A telecom O-band emitter in diamond

Color centers in diamond are promising platforms for quantum technologies. Most color centers in diamond discovered thus far emit in the visible or near-infrared wavelength range, which are incompatible with long-distance fiber communication and unfavorable for imaging in biological tissues. Here, we report the experimental observation of a new color center that emits in the telecom O-band, which we observe in silicon-doped bulk single crystal diamonds and microdiamonds. Combining absorption and photoluminescence measurements, we identify a zero-phonon line at 1221 nm and phonon replicas separated by 42 meV. Using transient absorption spectroscopy, we measure an excited state lifetime of around 270 ps and observe a long-lived baseline that may arise from intersystem crossing to another spin manifold.

cond-mat.mtrl-sci↗

arXiv2022

Probing itinerant carrier dynamics at the diamond surface using single nitrogen vacancy centers

Color centers in diamond are widely explored for applications in quantum sensing, computing, and networking. Their optical, spin, and charge properties have been extensively studied, while their interactions with itinerant carriers are relatively unexplored. Here we show that NV centers situated within 10 nm of the diamond surface can be converted to the neutral charge state via hole capture. By measuring the hole capture rate, we extract the capture cross section, which is suppressed by proximity to the diamond surface. The distance dependence is consistent with a carrier diffusion model, indicating that the itinerant carrier lifetime can be long, even at the diamond surface. Measuring dynamics of near-surface NV centers offers a new tool for characterizing the diamond surface and investigating charge transport in diamond devices.

cond-mat.mes-hall↗

arXiv2022

Neutral Silicon Vacancy Centers in Diamond via Photoactivated Itinerant Carriers

Neutral silicon vacancy (SiV0) centers in diamond are promising candidates for quantum network applications because of their exceptional optical properties and spin coherence. However, the stabilization of SiV0 centers requires careful Fermi level engineering of the diamond host material, making further technological development challenging. Here, we show that SiV0 centers can be efficiently stabilized by photoactivated itinerant carriers. Even in this nonequilibrium configuration, the resulting SiV0 centers are stable enough to allow for resonant optical excitation and optically detected magnetic resonance. Our results pave the way for on-demand generation of SiV0 centers as well as other emerging quantum defects in diamond.

quant-ph↗

arXiv2022

Nanoscale covariance magnetometry with diamond quantum sensors

Nitrogen vacancy (NV) centers in diamond are atom-scale defects with long spin coherence times that can be used to sense magnetic fields with high sensitivity and spatial resolution. Typically, the magnetic field projection at a single point is measured by averaging many sequential measurements with a single NV center, or the magnetic field distribution is reconstructed by taking a spatial average over an ensemble of many NV centers. In averaging over many single-NV center experiments, both techniques discard information. Here we propose and implement a new sensing modality, whereby two or more NV centers are measured simultaneously, and we extract temporal and spatial correlations in their signals that would otherwise be inaccessible. We analytically derive the measurable two-point correlator in the presence of environmental noise, quantum projection noise, and readout noise. We show that optimizing the readout noise is critical for measuring correlations, and we experimentally demonstrate measurements of correlated applied noise using spin-to-charge readout of two NV centers. We also implement a spectral reconstruction protocol for disentangling local and nonlocal noise sources, and demonstrate that independent control of two NV centers can be used to measure the temporal structure of correlations. Our covariance magnetometry scheme has numerous applications in studying spatiotemporal structure factors and dynamics, and opens a new frontier in nanoscale sensing.

quant-ph↗

arXiv2022

Neutral silicon vacancy centers in undoped diamond via surface control

Neutral silicon vacancy centers (SiV0) in diamond are promising candidates for quantum networks because of their long spin coherence times and stable, narrow optical transitions. However, stabilizing SiV0 requires high purity, boron doped diamond, which is not a readily available material. Here, we demonstrate an alternative approach via chemical control of the diamond surface. We use low-damage chemical processing and annealing in a hydrogen environment to realize reversible and highly stable charge state tuning in undoped diamond. The resulting SiV0 centers display optically detected magnetic resonance and bulk-like optical properties. Controlling the charge state tuning via surface termination offers a route for scalable technologies based on SiV0 centers, as well as charge state engineering of other defects.

quant-ph↗

arXiv2021

Biocompatible surface functionalization architecture for a diamond quantum sensor

Quantum metrology enables some of the most precise measurements. In the life sciences, diamond-based quantum sensing has enabled a new class of biophysical sensors and diagnostic devices that are being investigated as a platform for cancer screening and ultra-sensitive immunoassays. However, a broader application in the life sciences based on nanoscale nuclear magnetic resonance spectroscopy has been hampered by the need to interface highly sensitive quantum bit (qubit) sensors with their biological targets. Here, we demonstrate a new approach that combines quantum engineering with single-molecule biophysics to immobilize individual proteins and DNA molecules on the surface of a bulk diamond crystal that hosts coherent nitrogen vacancy qubit sensors. Our thin (sub-5 nm) functionalization architecture provides precise control over protein adsorption density and results in near-surface qubit coherence approaching 100 μs. The developed architecture remains chemically stable under physiological conditions for over five days, making our technique compatible with most biophysical and biomedical applications.

quant-ph↗

arXiv2021

Materials challenges for quantum technologies based on color centers in diamond

Emerging quantum technologies require precise control over quantum systems of increasing complexity. Defects in diamond, particularly the negatively charged nitrogen-vacancy (NV) center, are a promising platform with the potential to enable technologies ranging from ultra-sensitive nanoscale quantum sensors, to quantum repeaters for long distance quantum networks, to simulators of complex dynamical processes in many-body quantum systems, to scalable quantum computers. While these advances are due in large part to the distinct material properties of diamond, the uniqueness of this material also presents difficulties, and there is a growing need for novel materials science techniques for characterization, growth, defect control, and fabrication dedicated to realizing quantum applications with diamond. In this review we identify and discuss the major materials science challenges and opportunities associated with diamond quantum technologies.

quant-ph↗