arXiv subjects

Nedjma Bendiab

Publications and source records attributed to Nedjma Bendiab.

At least 19 recordsLinked to original sources

arXiv2025

Laser patterning of the room temperature van der Waals ferromagnet 1$T$-CrTe$_2$

Lamellar crystalline materials, whose layers are bond by van der Waals forces, can be stacked to form ultrathin artificial heterostructures, and in particular vertical magnetic junctions when some of the stacked materials are (ferro)magnetic. Here, using the room temperature van der Waals ferromagnet 1$T$-CrTe$_2$, we report a method for patterning lateral magnetic junctions. Exploiting the heat-induced phase transformation of the material into Cr$_x$Te$_y$ compounds ($x/y>1/2$), we use local laser heating to imprint patterns at the micron-scale. Optimizing laser heat dissipation, we further demonstrate the crucial role of the substrate to control the phase transformation. If plain, unstructured poorly heat-conducting substrates allow for direct writing of magnetic patterns, structured $h$-BN layers can serve as heat stencils to draw potentially thinner patterns. Besides, $h$-BN encapsulation turns out to be heat-protective (in addition from protecting against oxidation as it is generally used for), allowing the demonstration of room temperature ferromagnetism in $<$7~nm-thick 1$T$-CrTe$_2$.

cond-mat.mtrl-sci↗

arXiv2023

Stability of the In-Plane Room Temperature van der Waals Ferromagnet Chromium Ditelluride and Its Conversion to Chromium-Interleaved CrTe$_2$ Compounds

Van der Waals magnetic materials are building blocks for novel kinds of spintronic devices and playgrounds for exploring collective magnetic phenomena down to the two-dimensional limit. Chromium-tellurium compounds are relevant in this perspective. In particular, the 1$T$ phase of CrTe$_2$ has been argued to have a Curie temperature above 300~K, a rare and desirable property in the class of lamellar materials, making it a candidate for practical applications. However, recent literature reveals a strong variability in the reported properties, including magnetic ones. Using electron microscopy, diffraction and spectroscopy techniques, together with local and macroscopic magnetometry approaches, our work sheds new light on the structural, chemical and magnetic properties of bulk 1$T$-CrTe$_2$ exfoliated in the form of flakes having a thickness ranging from few to several tens of nanometers. We unambiguously establish that 1$T$-CrTe$_2$ flakes are ferromagnetic above room temperature, have an in-plane easy axis of magnetization, low coercivity, and we confirm that their Raman spectroscopy signatures are two modes, $E_{2\text{g}}$ (103.5~cm$^{-1}$) and $A_{1\text{g}}$ (136.5~cm$^{-1}$). We also prove that thermal annealing causes a phase transformation to monoclinic Cr$_5$Te$_8$ and, to a lesser extent, to trigonal Cr$_5$Te$_8$. In sharp contrast with 1$T$-CrTe$_2$, none of these compounds have a Curie temperature above room temperature, and they both have perpendicular magnetic anisotropy. Our findings reconcile the apparently conflicting reports in the literature and open opportunities for phase-engineered magnetic properties.

cond-mat.mtrl-sci↗

arXiv2022

Possible high temperature superconducting transitions in disordered graphite obtained from room temperature deintercalated KC$_8$

Although progress with twisted graphene nano-devices is boosting the superconductivity that is the consequence of their Moiré flat electronic bands, the immense choice for future development is an obstacle for their optimisation. We report here that soft-chemistry deintercalation of KC$_8$ breaks down graphite stacking generating a strong disorder that includes stacking twists and variable local doping. We obtain a bulk graphite whose individual crystallites have different stackings with arbitrary twists and doping, scanning in the same sample a huge number of stacking configurations. We perform magnetisation measurements on batches with different synthesis conditions. The disorder weakens the huge diamagnetism of graphite, revealing several phase transitions. A "ferromagnetic-like" magnetisation appears with Curie temperatures T$_0$$\sim$450K, that has to be subtracted from the measured magnetisation. Depending on sample synthesis, anomalies towards diamagnetic states appear at T$_c$$\sim$110K (3 samples), $\sim$240K (4 samples), $\sim$320K (2 samples). Electrical resistivity measurements yield anomalies for the T$_c\sim$240K transition, with one sample showing a 90% drop. We discuss the possibility that these (diamagnetic and resistitive) anomalies could be due to superconductivity.

cond-mat.supr-con↗

arXiv2021

Nano-sheets of two-dimensional polymers with dinuclear (arene)ruthenium nodes, synthesised at a liquid/liquid interface

We developed a new class of mono- or few-layered two-dimensional polymers based on dinuclear (arene)ruthenium nodes, obtained by combining the imine condensation with an interfacial chemistry process, and use a modified Langmuir-Schaefer method to transfer them onto solid surfaces. Robust nano-sheets of 2D polymers including dinuclear complexes of heavy ruthenium atoms as nodes were synthesised. These nano-sheets, whose thickness is of a few tens of nanometers, were suspended onto solid porous membranes. Then, they were thoroughly characterised with a combination of local probes, including Raman scattering, Fourier transform infrared spectroscopy and transmission electron microscopy in imaging and diffraction mode.

cond-mat.mtrl-sci↗

arXiv2020

Fermi resonance in the Raman spectrum of graphene

We report the observation of an intense anomalous peak at 1608 cm$^{-1}$ in the Raman spectrum of graphene associated to the presence of chromium nanoparticles in contact with graphene. Bombardment with an electron beam demonstrates that this peak is distinct from the well studied D$'$ peak appearing as defects are created in graphene; the new peak is found non dispersive. We argue that the bonding of chromium atoms with carbon atoms softens the out-of-plane optical (ZO) phonon mode, in such a way that the frequency of its overtone decreases to $2ω_{\rm ZO}\simω_{\rm G}$, where $ω_{\rm G}$=1585~cm$^{-1}$ is the frequency of the Raman-active E$_{\rm 2g}$ mode. Thus, the observed new peak is attributed to the 2ZO mode which becomes Raman-active following a mechanism known as Fermi resonance. First-principles calculations on vibrational and anharmonic properties of the graphene/Cr interface support this scenario.

cond-mat.mes-hall↗

arXiv2020

How to induce superconductivity in epitaxial graphene $via$ remote proximity effect through an intercalated gold layer

Graphene holds promises for exploring exotic superconductivity with Dirac-like fermions. Making graphene a superconductor at large scales is however a long-lasting challenge. A possible solution relies on epitaxially-grown graphene, using a superconducting substrate. Such substrates are scarce, and usually destroy the Dirac character of the electronic band structure. Using electron diffraction (reflection high-energy, and low-energy), scanning tunneling microscopy and spectroscopy, atomic force microscopy, angle-resolved photoemission spectroscopy, Raman spectroscopy, and density functional theory calculations, we introduce a strategy to induce superconductivity in epitaxial graphene $via$ a remote proximity effect, from the rhenium substrate through an intercalated gold layer. Weak graphene-Au interaction, contrasting with the strong undesired graphene-Re interaction, is demonstrated by a reduced graphene corrugation, an increased distance between graphene and the underlying metal, a linear electronic dispersion and a characteristic vibrational signature, both latter features revealing also a slight $p$ doping of graphene. We also reveal that the main shortcoming of the intercalation approach to proximity superconductivity is the creation of a high density of point defects in graphene (10$^{14}$~cm$^{-2}$). Finally, we demonstrate remote proximity superconductivity in graphene/Au/Re(0001), at low temperature.

cond-mat.supr-con↗

arXiv2020

Anharmonicity in Raman-active phonon modes in atomically thin MoS$_2$

Phonon-phonon anharmonic effects have a strong influence on the phonon spectrum; most prominent manifestation of these effects are the softening (shift in frequency) and broadening (change in FWHM) of the phonon modes at finite temperature. Using Raman spectroscopy, we studied the temperature dependence of the FWHM and Raman shift of $\mathrm{E_{2g}^1}$ and $\mathrm{A_{1g}}$ modes for single-layer and natural bilayer MoS$_2$ over a broad range of temperatures ($8 < $T$ < 300$ K). Both the Raman shift and FWHM of these modes show linear temperature dependence for $T>100$ K, whereas they become independent of temperature for $T<100$ K. Using first-principles calculations, we show that three-phonon anharmonic effects intrinsic to the material can account for the observed temperature-dependence of the line-width of both the modes. It also plays an important role in determining the temperature-dependence of the frequency of the Raman modes. The observed evolution of the line-width of the A$_{1g}$ mode suggests that electron-phonon processes are additionally involved. From the analysis of the temperature-dependent Raman spectra of MoS$_2$ on two different substrates -- SiO$_2$ and hexagonal boron nitride, we disentangle the contributions of external stress and internal impurities to these phonon-related processes. We find that the renormalization of the phonon mode frequencies on different substrates is governed by strain and intrinsic doping. Our work establishes the role of intrinsic phonon anharmonic effects in deciding the Raman shift in MoS$_2$ irrespective of substrate and layer number.

cond-mat.mes-hall↗

arXiv2020

In-plane magnetic domains and Néel-like domain walls in thin flakes of the room temperature CrTe$_2$ van der Waals ferromagnet

The recent discovery of magnetic van der Waals materials has triggered a wealth of investigations in materials science, and now offers genuinely new prospects for both fundamental and applied research. Although the catalogue of van der Waals ferromagnets is rapidly expanding, most of them have a Curie temperature below 300 K, a notable disadvantage for potential applications. Combining element-selective x-ray magnetic imaging and magnetic force microscopy, we resolve at room temperature the magnetic domains and domains walls in micron-sized flakes of the CrTe$_2$ van der Waals ferromagnet. Flux-closure magnetic patterns suggesting in-plane six-fold symmetry are observed. Upon annealing the material above its Curie point (315 K), the magnetic domains disappear. By cooling back down the sample, a different magnetic domain distribution is obtained, indicating material stability and lack of magnetic memory upon thermal cycling. The domain walls presumably have Néel texture, are preferentially oriented along directions separated by 120 degrees, and have a width of several tens of nanometers. Besides microscopic mapping of magnetic domains and domain walls, the coercivity of the material is found to be of a few mT only, showing that the CrTe$_2$ compound is magnetically soft. The coercivity is found to increase as the volume of the material decreases.

cond-mat.mtrl-sci↗

arXiv2018

Coherence and density dynamics of excitons in a single-layer MoS$_2$ reaching the homogeneous limit

We measure the coherent nonlinear response of excitons in a single-layer of molybdenum disulphide embedded in hexagonal boron nitride, forming a $h$-BN/MoS$_2$/$h$-BN heterostructure. Using four-wave mixing microscopy and imaging, we correlate the exciton homogeneous and inhomogeneous broadenings. We find that the exciton dynamics is governed by microscopic disorder on top of the ideal crystal properties. Analyzing the exciton ultra-fast density dynamics using amplitude and phase of the response, we investigate the relaxation pathways of the resonantly driven exciton population. The surface protection via encapsulation provides stable monolayer samples with low disorder, avoiding surface contaminations and the resulting exciton broadening and modifications of the dynamics. We identify areas localized to a few microns where the optical response is totally dominated by homogeneous broadening. Across the sample of tens of micrometers, weak inhomogeneous broadening and strain effects are observed, attributed to the remaining interaction with the $h$-BN and imperfections in the encapsulation process.

cond-mat.mes-hall↗

arXiv2018

Weakly Trapped, Charged, and Free Excitons in Single-Layer MoS2 in the Presence of Defects, Strain, and Charged Impurities

Few- and single-layer MoS2 host substantial densities of defects. They are thought to influence the doping level, the crystal structure, and the binding of electron-hole pairs. We disentangle the concomitant spectroscopic expression of all three effects and identify to what extent they are intrinsic to the material or extrinsic to it, i.e., related to its local environment. We do so by using different sources of MoS2 -- a natural one and one prepared at high pressure and high temperature -- and different substrates bringing varying amounts of charged impurities and by separating the contributions of internal strain and doping in Raman spectra. Photoluminescence unveils various optically active excitonic complexes. We discover a defect-bound state having a low binding energy of 20 meV that does not appear sensitive to strain and doping, unlike charged excitons. Conversely, the defect does not significantly dope or strain MoS2. Scanning tunneling microscopy and density functional theory simulations point to substitutional atoms, presumably individual nitrogen atoms at the sulfur site. Our work shows the way to a systematic understanding of the effect of external and internal fields on the optical properties of two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2017

High-Yield Proximity-Induced Chemical Vapor Deposition of Graphene Over Millimeter-Sized Hexagonal Boron Nitride

We present a transfer-free preparation method for graphene on hexagonal boron nitride (h-BN) crystals by chemical vapor deposition of graphene via a catalytic proximity effect, i.e. activated by a Cu catalyst close-by . We demonstrate the full coverage by monolayer graphene of half-millimeter-sized hexagonal boron nitride crystals exfoliated on a copper foil prior to growth. We demonstrate that the proximity of the copper catalyst ensures high yield with the growth rate estimated between of 2μm/min to 5μm/min . Optical and electron microscopies together with confocal micro-Raman mapping confirm that graphene covers the top surface of h-BN crystals that we attribute to be a lateral growth from the supporting catalytic copper substrate. Structural and electron transport characterization of the in-situ grown graphene present an electronic mobility of about 20, 000cm2/(V.s). Comparison with graphene/h-BN stacks obtained by manual transferring of similar CVD graphene onto h-BN, confirms the better neutrality reached by the self-assembled structures.

cond-mat.mtrl-sci↗

arXiv2016

Deviation from the normal mode expansion in a coupled graphene-nanomechanical system

We optomechanically measure the vibrations of a nanomechanical system made of a graphene membrane suspended on a silicon nitride nanoresonator. When probing the thermal noise of the coupled nanomechanical device, we observe a significant deviation from the normal mode expansion. It originates from the heterogeneous character of mechanical dissipation over the spatial extension of coupled eigenmodes, which violates one of the fundamental prerequisite for employing this commonly used description of the nanoresonators' thermal noise. We subsequently measure the local mechanical susceptibility and demonstrate that the fluctuation-dissipation theorem still holds and permits a proper evaluation of the thermal noise of the nanomechanical system. Since it naturally becomes delicate to ensure a good spatial homogeneity at the nanoscale, this approach is fundamental to correctly describe the thermal noise of nanomechanical systems which ultimately impact their sensing capacity.

cond-mat.mes-hall↗

arXiv2014

Convergent Fabrication of a Nanoporous Two-Dimensional Carbon Network from an Aldol Condensation on Metal Surfaces

We report a convergent surface polymerization reaction scheme on Au(111), based on a triple aldol condensation, yielding a carbon-rich, covalent nanoporous two-dimensional network. The reaction is not self-poisoning and proceeds up to a full surface coverage. The deposited precursor molecules 1,3,5-tri(4'-acetylphenyl) first form supramolecular assemblies that are converted to the porous covalent network upon heating. The formation and structure of the network and of the intermediate steps are studied with scanning tunneling microscopy, Raman spectroscopy and density functional theory.

cond-mat.mtrl-sci↗

arXiv2014

Strain superlattices and macroscale suspension of Graphene induced by corrugated substrates

We investigate the organized formation of strain, ripples and suspended features in macroscopic CVD-prepared graphene sheets transferred onto a corrugated substrate made of an ordered arrays of silica pillars of variable geometries. Depending on the aspect ratio and sharpness of the corrugated array, graphene can conformally coat the surface, partially collapse, or lay, fakir-like, fully suspended between pillars over tens of micrometers. Upon increase of pillar density, ripples in collapsed films display a transition from random oriented pleats emerging from pillars to ripples linking nearest neighboring pillars organized in domains of given orientation. Spatially-resolved Raman spectroscopy, atomic force microscopy and electronic microscopy reveal uniaxial strain domains in the transferred graphene, which are induced and controlled by the geometry. We propose a simple theoretical model to explain the transition between suspended and collapsed graphene. For the arrays with high aspect ratio pillars, graphene membranes stays suspended over macroscopic distances with minimal interaction with pillars tip apex. It offers a platform to tailor stress in graphene layers and open perspectives for electron transport and nanomechanical applications.

cond-mat.mes-hall↗

arXiv2013

Time- and Space-Modulated Raman Signals in Graphene-based Optical Cavities

We present fabrication and optical characterization of micro-cavities made of multilayer graphene (MLG) cantilevers clamped by metallic electrodes and suspended over Si/Si02 substrate. Graphene cantilevers act as a semi-transparent mirrors closing an air-wedge optical cavity. This simple geometry implements a standing-wave optical resonator along with a mechanical one. Equal thickness interference fringes are observed in both Raman and Rayleigh backscattered signals with interfringe given by their specific wavelength.Chromatic dispersion within the cavity makes possible spatial modulation of graphene Raman lines and selective rejection of the silicon background signals. Electrostatic actuation of the multilayer graphene cantilever by gate voltage tunes the cavity length and induces space and time modulation of backscattered light including Raman lines. We demonstrate the potential of those systems for high sensitivity Raman measurements of generic molecular species grafted on multilayer graphene surface. The Raman signal of the molecular layer can be modulated both in time and in space in a similar fashion and show enhancement with respect to a collapsed membrane.

cond-mat.mes-hall↗

arXiv2012

Suppression of Multilayer Graphene Patches during CVD Graphene growth on Copper

By limiting the carbon segregation at the copper surface defects, a pulsed chemical vapor deposition method for single layer graphene growth is shown to inhibit the formation of few-layer regions, leading to a fully single-layered graphene homogeneous at the centimeter scale. Graphene field-effect devices obtained after transfer of pulsed grown graphene on oxidized silicon exhibit mobilities above 5000 cm^2.V^-1.s^-1.

cond-mat.mes-hall↗

arXiv2012

Local Optical Probe of Motion and Stress in a multilayer graphene NEMS

Nanoelectromechanical systems (NEMSs) are emerging nanoscale elements at the crossroads between mechanics, optics and electronics, with significant potential for actuation and sensing applications. The reduction of dimensions compared to their micronic counterparts brings new effects including sensitivity to very low mass, resonant frequencies in the radiofrequency range, mechanical non-linearities and observation of quantum mechanical effects. An important issue of NEMS is the understanding of fundamental physical properties conditioning dissipation mechanisms, known to limit mechanical quality factors and to induce aging due to material degradation. There is a need for detection methods tailored for these systems which allow probing motion and stress at the nanometer scale. Here, we show a non-invasive local optical probe for the quantitative measurement of motion and stress within a multilayer graphene NEMS provided by a combination of Fizeau interferences, Raman spectroscopy and electrostatically actuated mirror. Interferometry provides a calibrated measurement of the motion, resulting from an actuation ranging from a quasi-static load up to the mechanical resonance while Raman spectroscopy allows a purely spectral detection of mechanical resonance at the nanoscale. Such spectroscopic detection reveals the coupling between a strained nano-resonator and the energy of an inelastically scattered photon, and thus offers a new approach for optomechanics.

cond-mat.mes-hall↗

arXiv2011

First principles study of iron-based molecule grafted on graphene

Motivated by recent experimental studies on single molecular magnets grafted on graphene and single walled carbon nanotubes, we investigate the structural, electronic, and magnetic properties of an iron based magnetic molecule grafted on a graphene sheet using \textit{ab initio} calculations. In particular, the induced charge transfer and magnetization are described in terms of the coupling between the molecule and the graphene orbitals. This interaction and its effects on graphene electronic properties are determined and discussed in view of the potential utilization of graphene in spintronics.

cond-mat.mes-hall↗