arXiv subjects

Nikolai Dontschuk

Publications and source records attributed to Nikolai Dontschuk.

16 recordsLinked to original sources

arXiv2026

Accurate noise spectroscopy using quantum sensing ensembles

Noise spectroscopy with quantum sensors is a powerful tool for characterising the properties of the sensor environment and detecting critical magnetic phenomena. While replacing single sensors with large ensembles promises substantial gains in measurement sensitivity and field of view, the output becomes difficult to interpret when there is a variable coupling to targets across the sensing ensemble. In this work we present an analysis procedure for accessing the true source noise spectrum using ensemble coherence from dynamical decoupling measurements. We show that sequence timing plays a dual role in ensemble noise spectroscopy, setting both the frequency selectivity and the weighted collection of signal across the ensemble, and demonstrate how incorporation of the coupling distribution allows accurate parameter extraction of the noise. We apply this procedure to a model system, shallow nitrogen-vacancy centres in diamond, and show that consistent information about the spectral character of MHz-range surface noise can be obtained from two sensing ensembles featuring distinct depth distributions. Our results pave the way for using large quantum sensor ensembles for quantitative, broadband noise spectroscopy, with straightforward extension to other solid-state and molecular sensing platforms.

cond-mat.mes-hall↗

arXiv2026

Ion Concentration and Voltage Imaging with Fluorescent Nanodiamonds

The nitrogen-vacancy (NV) center in diamond exists in different charge states with distinct photoluminescence properties, which are sensitive to the nanoscale electrochemical environment. Hence, the NV charge state is emerging as a powerful all-optical platform for nanoscale sensing and imaging. Although significant progress has been made in engineering near-surface NV centers in bulk diamond, controlling the NV charge state in fluorescent nanodiamonds (FNDs) has proven challenging, limiting the sensitivity and reliability of FND-based charge state sensing. Here, we demonstrate reliable, reversible switching between the fluorescent NV$^0$ and non-fluorescent NV$^+$ charge states in sub-30 nm FNDs via surface oxidation and hydrogenation, respectively, for single particles and particle powder. In aqueous electrochemical cells, we demonstrate voltage and ion concentration imaging based on the NV charge state in self-assembled FND layers on transparent substrates. Applied voltages reliably modulate the FND PL with a sensitivity of up to 16 mV Hz$^{-1/2}$. Importantly, FND PL is also modulated by local changes in salt concentration with a sensitivity of up to 1.8% per millimolar NaCl, enabling all-optical imaging of ion concentration gradients at the microscale. Our results represent a significant step toward realizing fast, stable, and scalable nanoscale charge- and voltage-imaging technologies with sub-micrometer spatial resolution.

cond-mat.mes-hall↗

arXiv2026

Solution gate control of shallow silicon vacancy charge states in diamond

Silicon-vacancy (SiV) centers in diamond combine near-infrared emission with solid-state robustness, but their performance hinges on isolating favorable defect charge states. We demonstrate static and dynamic control of ultra-shallow (<15 nm) SiV ensembles in type IIa diamond. By combining low-energy ion implantation with tailored oxygen and hydrogen terminations, we map regimes that maximise the fluorescent SiV- population over dark charge states. We then realize reversible SiV- to SiV0 conversion using aqueous electrolytic gating with sub-200 mV biases and low optical powers. Our results enable low-power electrical control of SiV ensembles for integrated quantum photonics and biologically compatible voltage imaging in the near-infrared.

cond-mat.mtrl-sci↗

arXiv2025

The properties of the nitrogen-vacancy center in milled chemical vapor deposition nanodiamonds

Fluorescent nanodiamonds (FNDs) containing negatively charged nitrogen-vacancy (NV-) centers are vital for many emerging quantum sensing applications from magnetometry to intracellular sensing in biology. However, developing a scalable fabrication method for FNDs hosting color centers with consistent bulk-like photoluminescence (PL) and spin coherence properties remains a highly desired but unrealized goal. Here, we investigate optimized ball milling of single-crystal diamonds produced via chemical vapor deposition (CVD) and containing 2 ppm of substitutional nitrogen and 0.3 ppm of NV- to achieve this goal. The NV charge state, PL lifetime, and spin properties of bulk CVD diamond samples are directly compared to milled CVD FNDs and commercial high-pressure high-temperature (HPHT) FNDs. We find that on average, the relative contribution of the NV- charge state to the total NV PL is lower and the NV PL lifetime is longer in CVD FNDs compared to HPHT FNDs, both likely due to the lower Ns0 concentration in CVD FNDs. The CVD bulk and CVD FNDs on average show similar average T1 spin relaxation times of 3.2 $\pm$ 0.7 ms and 4.7 $\pm$ 1.6 ms, respectively, compared to 0.17 $\pm$ 0.01 ms for commercial HPHT FNDs. Our results demonstrate that ball milling of CVD diamonds enables the large-scale fabrication of NV ensembles in FNDs with bulk-like T1 spin relaxation properties.

cond-mat.mes-hall↗

arXiv2025

All-optical electric field sensing with nanodiamond-doped polymer thin films

The nitrogen-vacancy (NV) center is a photoluminescent defect in diamond that exists in different charge states, NV$^-$ and NV$^0$, that are sensitive to the NV's nanoscale environment. Here, we show that photoluminescence (PL) from NV centers in fluorescent nanodiamonds (FNDs) can be employed for all-optical voltage sensing based on electric field-induced NV charge state modulation. More than 95% of FNDs integrated into a capacitor device show a transient increase in NV$^-$ PL intensity of up to 31% within 0.1 ms after application of an external voltage, accompanied by a simultaneous decrease in NV$^0$ PL. The change in NV$^-$ PL increases with increasing applied voltage from 0 to 100 V, corresponding to an electric field of 0 to 625 kV cm$^ {-1}$ in our devices. The electric field sensitivity of a single FND is 19 V cm$^{-1}$ Hz$^ {-1/2}$. We investigate the NV charge state photodynamics on the millisecond timescale and find that the change in NV PL strongly depends on the rate of photoexcitation. We propose a model that qualitatively explains the observed changes in NV PL based on an electric field-induced redistribution of photoexcited electrons from substitutional nitrogen defects to NV centers, leading to a transient conversion of NV$^0$ to NV$^-$ centers upon application of an external voltage. Our results contribute to the development of FNDs as reliable, all-optical, nanoscale electric field sensors in solid-state systems.

cond-mat.mes-hall↗

arXiv2025

Robust quantification of the diamond nitrogen-vacancy center charge state via photoluminescence spectroscopy

Nitrogen vacancy (NV) centers in diamond are at the heart of many emerging quantum technologies, all of which require control over the NV charge state. Hence, methods for quantification of the relative photoluminescence (PL) intensities of the NV$^0$ and NV$^-$ charge state, i.e., a charge state ratio, are vital. Several approaches to quantify NV charge state ratios have been reported but are either limited to bulk-like NV diamond samples or yield qualitative results. We propose an NV charge state quantification protocol based on the determination of sample- and experimental setup-specific NV$^0$ and NV$^-$ reference spectra. The approach employs blue (400-470 nm) and green (480-570 nm) excitation to infer pure NV$^0$ and NV$^-$ spectra, which are then used to quantify NV charge state ratios in subsequent experiments via least squares fitting. We test our dual excitation protocol (DEP) for a bulk diamond NV sample, 20 and 100 nm nanodiamond particles and compare results with those obtained via other commonly used techniques such as zero-phonon line fitting and non-negative matrix factorization. We find that DEP can be employed across different samples and experimental setups and yields consistent and quantitative results for NV charge state ratios that are in agreement with our understanding of NV photophysics. By providing robust NV charge state quantification across sample types and measurement platforms, DEP will support the development of NV-based quantum technologies.

cond-mat.mes-hall↗

arXiv2024

Impact of surface treatments on the electron affinity of nitrogen-doped ultrananocrystalline diamond

In recent years, various forms of nanocrystalline diamond (NCD) have emerged as an attractive group of diamond/graphite mixed-phase materials for a range of applications from electron emission sources to electrodes for neural interfacing. To tailor their properties for different uses, NCD surfaces can be terminated with various chemical functionalities, in particular hydrogen and oxygen, which shift the band edge positions and electron affinity values. While the band edge positions of chemically terminated single crystal diamond are well understood, the same is not true for nanocrystalline diamond, which has uncontrolled crystallographic surfaces with a variety of chemical states as well as graphitic grain boundary regions. In this work, the relative band edge positions of as-grown, hydrogen terminated, and oxygen terminated nitrogen-doped ultrananocrystalline diamond (N-UNCD) are determined using ultraviolet photoelectron spectroscopy (UPS), while the band bending is investigated using photoelectrochemical measurements. In contrast to the widely reported negative electrode affinity of hydrogen terminated single crystal diamond, our work demonstrates that hydrogen terminated N-UNCD exhibits a positive electron affinity owing to the increased surface and bulk defect densities. These findings elucidate the marked differences in electrochemical properties of hydrogen and oxygen terminated N-UNCD, such as the dramatic changes in electrochemical capacitance.

physics.app-ph↗

arXiv2024

Methods for color center preserving hydrogen-termination of diamond

Chemical functionalization of diamond surfaces by hydrogen is an important method for controlling the charge state of near-surface fluorescent color centers, an essential process in fabricating devices such as diamond field-effect transistors and chemical sensors, and a required first step for realizing families of more complex terminations through subsequent chemical processing. In all these cases, termination is typically achieved using hydrogen plasma sources which can etch or damage the diamond as well as deposited materials or embedded colour centers. This work explores alternative methods for lower-damage hydrogenation of diamond surfaces, specifically the annealing of diamond samples in high-purity, non-explosive mixtures of nitrogen and hydrogen gas, and the exposure of samples to microwave hydrogen plasmas in the absence of intentional stage heating. The effectiveness of these methods are characterized by x-ray photoelectron spectroscopy, and comparison of the results to density-functional modelling of the surface hydrogenation energetics implicates surface oxygen ligands as the primary factor limiting the termination quality of annealed samples. Finally, photoluminescence spectroscopy is used to verify that both the annealing and reduced sample temperature plasma methods are non-destructive to near-surface ensembles of nitrogen-vacancy centers, in stark contrast to plasma treatments which use heated sample stages.

cond-mat.mtrl-sci↗

arXiv2021

Electrical Control of Quantum Emitters in a Van der Waals Heterostructure

Controlling and manipulating individual quantum systems in solids underpins the growing interest in development of scalable quantum technologies. Recently, hexagonal boron nitride has garnered significant attention in quantum photonic applications due to its ability to host optically stable quantum emitters. However, the large band gap of hBN and the lack of efficient doping inhibits electrical triggering and limits opportunities to study electrical control of emitters. Here, we show an approach to electrically modulate quantum emitters in n hBN graphene van der Waals heterostructure. We show that quantum emitters in hBN can be reversibly activated and modulated by applying a bias across the device. Notably, a significant number of quantum emitters are intrinsically dark, and become optically active at non-zero voltages. To explain the results, we provide a heuristic electrostatic model of this unique behaviour. Finally, employing these devices we demonstrate a nearly coherent source with linewidths of 160 MHz. Our results enhance the potential of hBN for tuneable solid state quantum emitters for the growing field of quantum information science.

physics.optics↗

arXiv2020

Imaging domain reversal in an ultrathin van der Waals ferromagnet

The recent isolation of two-dimensional van der Waals magnetic materials has uncovered rich physics that often differs from the magnetic behaviour of their bulk counterparts. However, the microscopic details of fundamental processes such as the initial magnetization or domain reversal, which govern the magnetic hysteresis, remain largely unknown in the ultrathin limit. Here we employ a widefield nitrogen-vacancy (NV) microscope to directly image these processes in few-layer flakes of magnetic semiconductor vanadium triiodide (VI$_3$). We observe complete and abrupt switching of most flakes at fields $H_c\approx0.5-1$ T (at 5 K) independent of thickness down to two atomic layers, with no intermediate partially-reversed state. The coercive field decreases as the temperature approaches the Curie temperature ($T_c\approx50$ K), however, the switching remains abrupt. We then image the initial magnetization process, which reveals thickness-dependent domain wall depinning fields well below $H_c$. These results point to ultrathin VI$_3$ being a nucleation-type hard ferromagnet, where the coercive field is set by the anisotropy-limited domain wall nucleation field. This work illustrates the power of widefield NV microscopy to investigate magnetization processes in van der Waals ferromagnets, which could be used to elucidate the origin of the hard ferromagnetic properties of other materials and explore field- and current-driven domain wall dynamics.

cond-mat.mes-hall↗

arXiv2019

Laser modulation of superconductivity in a cryogenic widefield nitrogen-vacancy microscope

Microscopic imaging based on nitrogen-vacancy (NV) centres in diamond, a tool increasingly used for room-temperature studies of condensed matter systems, has recently been extended to cryogenic conditions. However, it remains unclear whether the technique is viable for imaging temperature-sensitive phenomena below 10 K given the inherent laser illumination requirements, especially in a widefield configuration. Here we realise a widefield NV microscope with a field of view of 100 $μ$m and a base temperature of 4 K, and use it to image Abrikosov vortices and transport currents in a superconducting Nb film. We observe the disappearance of vortices upon increase of laser power and their clustering about hot spots upon decrease, indicating that laser powers as low as 1 mW (4 orders of magnitude below the NV saturation) are sufficient to locally quench the superconductivity of the film ($T_c = 9$ K). This significant local heating is confirmed by resistance measurements, which reveal the presence of large temperature gradients (several K) across the film. We then investigate the effect of such gradients on transport currents, where the current path is seen to correlate with the temperature profile even in the fully superconducting phase. In addition to highlighting the role of temperature inhomogeneities in superconductivity phenomena, this work establishes that, under sufficiently low laser power conditions, widefield NV microscopy enables imaging over mesoscopic scales down to 4 K with a submicrometer spatial resolution, providing a new platform for real-space investigations of a range of systems from topological insulators to van der Waals ferromagnets.

cond-mat.supr-con↗

arXiv2019

Imaging graphene field-effect transistors on diamond using nitrogen-vacancy microscopy

The application of imaging techniques based on ensembles of nitrogen-vacancy (NV) sensors in diamond to characterise electrical devices has been proposed, but the compatibility of NV sensing with operational gated devices remains largely unexplored. Here we fabricate graphene field-effect transistors (GFETs) directly on the diamond surface and characterise them via NV microscopy. The current density within the gated graphene is reconstructed from NV magnetometry under both mostly p- and n-type doping, but the exact doping level is found to be affected by the measurements. Additionally, we observe a surprisingly large modulation of the electric field at the diamond surface under an applied gate potential, seen in NV photoluminescence and NV electrometry measurements, suggesting a complex electrostatic response of the oxide-graphene-diamond structure. Possible solutions to mitigate these effects are discussed.

cond-mat.mes-hall↗

arXiv2018

Origins of diamond surface noise probed by correlating single spin measurements with surface spectroscopy

The nitrogen vacancy (NV) center in diamond exhibits spin-dependent fluorescence and long spin coherence times under ambient conditions, enabling applications in quantum information processing and sensing. NV centers near the surface can have strong interactions with external materials and spins, enabling new forms of nanoscale spectroscopy. However, NV spin coherence degrades within 100 nanometers of the surface, suggesting that diamond surfaces are plagued with ubiquitous defects. Prior work on characterizing near-surface noise has primarily relied on using NV centers themselves as probes; while this has the advantage of exquisite sensitivity, it provides only indirect information about the origin of the noise. Here we demonstrate that surface spectroscopy methods and single spin measurements can be used as complementary diagnostics to understand sources of noise. We find that surface morphology is crucial for realizing reproducible chemical termination, and use these insights to achieve a highly ordered, oxygen-terminated surface with suppressed noise. We observe NV centers within 10 nm of the surface with coherence times extended by an order of magnitude.

cond-mat.mtrl-sci↗

arXiv2018

Evidence for Primal sp2 Defects at the Diamond Surface: Candidates for Electron Trapping and Noise Sources

Diamond materials are central to an increasing range of advanced technological demonstrations, from high power electronics, to nano-scale quantum bio-imaging with unprecedented sensitivity. However, the full exploitation of diamond for these applications is often limited by the uncontrolled nature of the diamond material surface, which suffers from Fermi-level pinning and hosts a significant density of electro-magnetic noise sources. These issues occur despite the oxide-free and air-stable nature of the diamond crystal surface, which should be an ideal candidate for functionalization and chemical-engineering. In this work we reveal a family of previously unidentified and near-ubiquitous primal surface defects which we assign to differently reconstructed surface vacancies. The density of these defects is quantified with X-ray absorption spectroscopy, their energy structures are elucidated by ab initio calculations, and their effect on near-surface quantum probes is measured directly. Subsequent ab-initio calculation of band-bending from these defects suggest they are the source of Fermi-level pinning at most diamond surfaces. Finally, an investigation is conducted on a broad range of post-growth surface treatments and concludes that none of them can reproducibly reduce this defect density below the Fermi-pinning threshold, making this defect a prime candidate as the source for decoherence-limiting noise in near-surface quantum probes.

cond-mat.mes-hall↗

arXiv2017

High precision single qubit tuning via thermo-magnetic field control

Precise control of the resonant frequency of a spin qubit is of fundamental importance to quantum sensing protocols. We demonstrate a control technique on a single nitrogen-vacancy (NV) centre in diamond where the applied magnetic field is modified by fine-tuning a permanent magnet's magnetisation via temperature control. Through this control mechanism, nanoscale cross-relaxation spectroscopy of both electron and nuclear spins in the vicinity of the NV centre are performed. We then show that through maintaining the magnet at a constant temperature an order of magnitude improvement in the stability of the NV qubit frequency can be achieved. This improved stability is tested in the polarisation of a small ensemble of nearby $^{13}$C spins via resonant cross-relaxation and the lifetime of this polarisation explored. The effectiveness and relative simplicity of this technique may find use in the realisation of portable spectroscopy and/or hyperpolarisation systems.

quant-ph↗

arXiv2016

Quantum imaging of current flow in graphene

Since its first isolation in 2004, graphene has been found to host a plethora of unusual electronic transport phenomena, making it a fascinating system for fundamental studies in condensed-matter physics as well as offering tremendous opportunities for future electronic and sensing devices. However, to fully realise these goals a major challenge is the ability to non-invasively image charge currents in monolayer graphene structures and devices. Typically, electronic transport in graphene has been investigated via resistivity measurements, however, such measurements are generally blind to spatial information critical to observing and studying landmark transport phenomena such as electron guiding and focusing, topological currents and viscous electron backflow in real space, and in realistic imperfect devices. Here we bring quantum imaging to bear on the problem and demonstrate high-resolution imaging of current flow in graphene structures. Our method utilises an engineered array of near-surface, atomic-sized quantum sensors in diamond, to map the vector magnetic field and reconstruct the vector current density over graphene geometries of varying complexity, from mono-ribbons to junctions, with spatial resolution at the diffraction limit and a projected sensitivity to currents as small as 1 μA. The measured current maps reveal strong spatial variations corresponding to physical defects at the sub-μm scale. The demonstrated method opens up an important new avenue to investigate fundamental electronic and spin transport in graphene structures and devices, and more generally in emerging two-dimensional materials and thin film systems.

cond-mat.mes-hall↗