arXiv subjects

Ningtao Liu

Publications and source records attributed to Ningtao Liu.

6 recordsLinked to original sources

arXiv2026

Wafer-scale Demonstration of High-voltage beta-Ga2O3 MOSFETs with Excellent Uniformity and over 3kV Breakdown Voltages

This study demonstrates a wafer-scale growth of a 2-inch Si-doped $β$-Ga2O3 (100) epitaxial wafer and the realization of uniform, high-voltage lateral $β$-Ga2O3 MOSFET arrays. The 2-inch homoepitaxial $β$-Ga2O3 (100) film grown by MOCVD exhibit excellent crystalline uniformity with an average rocking curve FWHM of ~27.0 arcsec and a low surface roughness less than 1 nm, alongside a uniform net doping concentration on the value of 4.60 $\times$ 1E17 cm-3. The fabricated MOSFETs deliver a threshold voltage of -31.75 V, a drain-current on/off ratio over 1E9, a specific on-resistance of 126.52 mohm$\cdot$cm2 and breakdown voltage exceeding 3 kV. Statistical analysis across the entire wafer presents good device uniformity, with threshold voltages ranging from -28 V to -36 V, output current densities of 60-75 mA/mm, and a breakdown voltage over 3 kV. These results provide the demonstration using the 2-inch $β$-Ga2O3 epitaxial wafer to realize high-voltage $β$-Ga2O3 MOSFETs with wafer-scale performance uniformity for next-generation power device application.

cond-mat.mtrl-sci↗

arXiv2026

Deep Hierarchical Knowledge Loss for Fault Intensity Diagnosis

Fault intensity diagnosis (FID) plays a pivotal role in intelligent manufacturing while neglecting dependencies among target classes hinders its practical deployment. This paper introduces a novel and general framework with deep hierarchical knowledge loss (DHK) to achieve hierarchical consistent representation and prediction. We develop a novel hierarchical tree loss to enable a holistic mapping of same-attribute classes, leveraging tree-based positive and negative hierarchical knowledge constraints. We further design a focal hierarchical tree loss to enhance its extensibility and devise two adaptive weighting schemes based on tree height. In addition, we propose a group tree triplet loss with hierarchical dynamic margin by incorporating hierarchical group concepts and tree distance to model boundary structural knowledge across classes. The joint two losses significantly improve the recognition of subtle faults. Extensive experiments are performed on four real-world datasets from various industrial domains (three cavitation datasets from SAMSON AG and one publicly available dataset) for FID, all showing superior results and outperforming recent state-of-the-art FID methods.

eess.AS↗

arXiv2025

A Review of Machine Learning for Cavitation Intensity Recognition in Complex Industrial Systems

Cavitation intensity recognition (CIR) is a critical technology for detecting and evaluating cavitation phenomena in hydraulic machinery, with significant implications for operational safety, performance optimization, and maintenance cost reduction in complex industrial systems. Despite substantial research progress, a comprehensive review that systematically traces the development trajectory and provides explicit guidance for future research is still lacking. To bridge this gap, this paper presents a thorough review and analysis of hundreds of publications on intelligent CIR across various types of mechanical equipment from 2002 to 2025, summarizing its technological evolution and offering insights for future development. The early stages are dominated by traditional machine learning approaches that relied on manually engineered features under the guidance of domain expert knowledge. The advent of deep learning has driven the development of end-to-end models capable of automatically extracting features from multi-source signals, thereby significantly improving recognition performance and robustness. Recently, physical informed diagnostic models have been proposed to embed domain knowledge into deep learning models, which can enhance interpretability and cross-condition generalization. In the future, transfer learning, multi-modal fusion, lightweight network architectures, and the deployment of industrial agents are expected to propel CIR technology into a new stage, addressing challenges in multi-source data acquisition, standardized evaluation, and industrial implementation. The paper aims to systematically outline the evolution of CIR technology and highlight the emerging trend of integrating deep learning with physical knowledge. This provides a significant reference for researchers and practitioners in the field of intelligent cavitation diagnosis in complex industrial systems.

eess.SP↗

arXiv2025

Hierarchical knowledge guided fault intensity diagnosis of complex industrial systems

Fault intensity diagnosis (FID) plays a pivotal role in monitoring and maintaining mechanical devices within complex industrial systems. As current FID methods are based on chain of thought without considering dependencies among target classes. To capture and explore dependencies, we propose a hierarchical knowledge guided fault intensity diagnosis framework (HKG) inspired by the tree of thought, which is amenable to any representation learning methods. The HKG uses graph convolutional networks to map the hierarchical topological graph of class representations into a set of interdependent global hierarchical classifiers, where each node is denoted by word embeddings of a class. These global hierarchical classifiers are applied to learned deep features extracted by representation learning, allowing the entire model to be end-to-end learnable. In addition, we develop a re-weighted hierarchical knowledge correlation matrix (Re-HKCM) scheme by embedding inter-class hierarchical knowledge into a data-driven statistical correlation matrix (SCM) which effectively guides the information sharing of nodes in graphical convolutional neural networks and avoids over-smoothing issues. The Re-HKCM is derived from the SCM through a series of mathematical transformations. Extensive experiments are performed on four real-world datasets from different industrial domains (three cavitation datasets from SAMSON AG and one existing publicly) for FID, all showing superior results and outperform recent state-of-the-art FID methods.

cs.AI↗

arXiv2022

GRU-TV: Time- and velocity-aware GRU for patient representation on multivariate clinical time-series data

Electronic health records (EHRs) are usually highly dimensional, heterogeneous, and multimodal. Besides, the random recording of clinical variables results in high missing rates and uneven time intervals between adjacent records in the multivariate clinical time-series data extracted from EHRs. Current works using clinical time-series data for patient representation regard the patients' physiological status as a discrete process described by sporadically collected records. However, changes in the patient's physiological condition are continuous and dynamic processes. The perception of time and velocity of change is crucial for patient representation learning. In this study, we propose a time- and velocity-aware gated recurrent unit model (GRU-TV) for patient representation learning of clinical multivariate time-series data in a time-continuous manner. The neural ordinary differential equations (ODEs) and velocity perception mechanism are applied to perceive the time interval between adjacent records and changing rate of the patient's physiological status, respectively. Our experiments on two real clinical EHR datasets (PhysioNet2012, MIMIC-III) establish that GRU-TV is a robust model on computer-aided diagnosis (CAD) tasks, especially on sequences with high-variance time intervals.

cs.LG↗

arXiv2021

Chronological age estimation of lateral cephalometric radiographs with deep learning

The traditional manual age estimation method is crucial labor based on many kinds of the X-Ray image. Some current studies have shown that lateral cephalometric(LC) images can be used to estimate age. However, these methods are based on manually measuring some image features and making age estimates based on experience or scoring. Therefore, these methods are time-consuming and labor-intensive, and the effect will be affected by subjective opinions. In this work, we propose a saliency map-enhanced age estimation method, which can automatically perform age estimation based on LC images. Meanwhile, it can also show the importance of each region in the image for age estimation, which undoubtedly increases the method's Interpretability. Our method was tested on 3014 LC images from 4 to 40 years old. The MEA of the experimental result is 1.250, which is less than the result of the state-of-the-art benchmark because it performs significantly better in the age group with fewer data. Besides, our model is trained in each area with a high contribution to age estimation in LC images, so the effect of these different areas on the age estimation task was verified. Consequently, we conclude that the proposed saliency map enhancements chronological age estimation method of lateral cephalometric radiographs can work well in chronological age estimation task, especially when the amount of data is small. Besides, compared with traditional deep learning, our method is also interpretable.

eess.IV↗