arXiv subjects

Nir Shlezinger

Publications and source records attributed to Nir Shlezinger.

At least 127 records · Page 7Linked to original sources

arXiv2022

Jointly Learned Symbol Detection and Signal Reflection in RIS-Aided Multi-user MIMO Systems

Reconfigurable Intelligent Surfaces (RISs) are regarded as a key technology for future wireless communications, enabling programmable radio propagation environments. However, the passive reflecting feature of RISs induces notable challenges on channel estimation, making coherent symbol detection a challenging task. In this paper, we consider the uplink of RIS-aided multi-user Multiple-Input Multiple-Output (MIMO) systems and propose a Machine Learning (ML) approach to jointly design the multi-antenna receiver and configure the RIS reflection coefficients, which does not require explicit full knowledge of the channel input-output relationship. Our approach devises a ML-based receiver, while the configurations of the RIS reflection patterns affecting the underlying propagation channel are treated as hyperparameters. Based on this system design formulation, we propose a Bayesian ML framework for optimizing the RIS hyperparameters, according to which the transmitted pilots are directly used to jointly tune the RIS and the multi-antenna receiver. Our simulation results demonstrate the capability of the proposed approach to provide reliable communications in non-linear channel conditions corrupted by Gaussian noise.

eess.SP↗

arXiv2022

Channel Estimation with Simultaneous Reflecting and Sensing Reconfigurable Intelligent Metasurfaces

Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as nearly passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including an inherent difficulty in estimating the underlying wireless channels. In this paper, we propose the concept of Hybrid RISs (HRISs), which do not solely reflect the impinging waveform in a controllable fashion, but are also capable of sensing and processing a portion of it via some active reception elements. We first present implementation details for this novel metasurface architecture and propose a simple model for its operation, when considered for wireless communications. As an indicative application of HRISs, we formulate and solve the individual channels identification problem for the uplink of multi-user HRIS-empowered systems. Our numerical results showcase that, in the high signal-to-noise regime, HRISs enable individual channel estimation with notably reduced amounts of pilots, compared to those needed when using a purely reflective RIS that can only estimate the cascaded channel.

eess.SP↗

arXiv2022

Uncertainty in Data-Driven Kalman Filtering for Partially Known State-Space Models

Providing a metric of uncertainty alongside a state estimate is often crucial when tracking a dynamical system. Classic state estimators, such as the Kalman filter (KF), provide a time-dependent uncertainty measure from knowledge of the underlying statistics, however, deep learning based tracking systems struggle to reliably characterize uncertainty. In this paper, we investigate the ability of KalmanNet, a recently proposed hybrid model-based deep state tracking algorithm, to estimate an uncertainty measure. By exploiting the interpretable nature of KalmanNet, we show that the error covariance matrix can be computed based on its internal features, as an uncertainty measure. We demonstrate that when the system dynamics are known, KalmanNet-which learns its mapping from data without access to the statistics-provides uncertainty similar to that provided by the KF; and while in the presence of evolution model-mismatch, KalmanNet pro-vides a more accurate error estimation.

eess.SP↗

arXiv2022

PhysFad: Physics-Based End-to-End Channel Modeling of RIS-Parametrized Environments with Adjustable Fading

Programmable radio environments parametrized by reconfigurable intelligent surfaces (RISs) are emerging as a new wireless communications paradigm, but currently used channel models for the design and analysis of signal-processing algorithms cannot include fading in a manner that is faithful to the underlying wave physics. To overcome this roadblock, we introduce a physics-based end-to-end model of RIS-parametrized wireless channels with adjustable fading (coined PhysFad) which is based on a first-principles coupled-dipole formalism. PhysFad naturally incorporates the notions of space and causality, dispersion (i.e., frequency selectivity) and the intertwinement of each RIS element's phase and amplitude response, as well as any arising mutual coupling effects including long-range mesoscopic correlations. PhysFad offers the to-date missing tuning knob for adjustable fading. We thoroughly characterize PhysFad and demonstrate its capabilities for a prototypical problem of RIS-enabled over-the-air channel equalization in rich-scattering wireless communications. We also share a user-friendly version of our code to help the community transition towards physics-based models with adjustable fading.

cs.IT↗

arXiv2022

Deep Task-Based Analog-to-Digital Conversion

Analog-to-digital converters (ADCs) allow physical signals to be processed using digital hardware. Their conversion consists of two stages: Sampling, which maps a continuous-time signal into discrete-time, and quantization, i.e., representing the continuous-amplitude quantities using a finite number of bits. ADCs typically implement generic uniform conversion mappings that are ignorant of the task for which the signal is acquired, and can be costly when operating in high rates and fine resolutions. In this work we design task-oriented ADCs which learn from data how to map an analog signal into a digital representation such that the system task can be efficiently carried out. We propose a model for sampling and quantization that facilitates the learning of non-uniform mappings from data. Based on this learnable ADC mapping, we present a mechanism for optimizing a hybrid acquisition system comprised of analog combining, tunable ADCs with fixed rates, and digital processing, by jointly learning its components end-to-end. Then, we show how one can exploit the representation of hybrid acquisition systems as deep network to optimize the sampling rate and quantization rate given the task by utilizing Bayesian meta-learning techniques. We evaluate the proposed deep task-based ADC in two case studies: the first considers symbol detection in multi-antenna digital receivers, where multiple analog signals are simultaneously acquired in order to recover a set of discrete information symbols. The second application is the beamforming of analog channel data acquired in ultrasound imaging. Our numerical results demonstrate that the proposed approach achieves performance which is comparable to operating with high sampling rates and fine resolution quantization, while operating with reduced overall bit rate.

eess.SP↗

arXiv2021

Learned Factor Graphs for Inference from Stationary Time Sequences

The design of methods for inference from time sequences has traditionally relied on statistical models that describe the relation between a latent desired sequence and the observed one. A broad family of model-based algorithms have been derived to carry out inference at controllable complexity using recursive computations over the factor graph representing the underlying distribution. An alternative model-agnostic approach utilizes machine learning (ML) methods. Here we propose a framework that combines model-based algorithms and data-driven ML tools for stationary time sequences. In the proposed approach, neural networks are developed to separately learn specific components of a factor graph describing the distribution of the time sequence, rather than the complete inference task. By exploiting stationary properties of this distribution, the resulting approach can be applied to sequences of varying temporal duration. Learned factor graph can be realized using compact neural networks that are trainable using small training sets, or alternatively, be used to improve upon existing deep inference systems. We present an inference algorithm based on learned stationary factor graphs, which learns to implement the sum-product scheme from labeled data, and can be applied to sequences of different lengths. Our experimental results demonstrate the ability of the proposed learned factor graphs to learn to carry out accurate inference from small training sets for sleep stage detection using the Sleep-EDF dataset, as well as for symbol detection in digital communications with unknown channels.

cs.LG↗

arXiv2021

Task-Based Graph Signal Compression

Graph signals arise in various applications, ranging from sensor networks to social media data. The high-dimensional nature of these signals implies that they often need to be compressed in order to be stored and transmitted. The common framework for graph signal compression is based on sampling, resulting in a set of continuous-amplitude samples, which in turn have to be quantized into a finite bit representation. In this work we study the joint design of graph signal sampling along with quantization, for graph signal compression. We focus on bandlimited graph signals, and show that the compression problem can be represented as a task-based quantization setup, in which the task is to recover the spectrum of the signal. Based on this equivalence, we propose a joint design of the sampling and recovery mechanisms for a fixed quantization mapping, and present an iterative algorithm for dividing the available bit budget among the discretized samples. Furthermore, we show how the proposed approach can be realized using graph filters combining elements corresponding the neighbouring nodes of the graph, thus facilitating distributed implementation at reduced complexity. Our numerical evaluations on both synthetic and real world data shows that the joint sampling and quantization method yields a compact finite bit representation of high-dimensional graph signals, which allows reconstruction of the original signal with accuracy within a small gap of that achievable with infinite resolution quantizers.

eess.SP↗

arXiv2021

Unsupervised Learned Kalman Filtering

In this paper we adapt KalmanNet, which is a recently pro-posed deep neural network (DNN)-aided system whose architecture follows the operation of the model-based Kalman filter (KF), to learn its mapping in an unsupervised manner, i.e., without requiring ground-truth states. The unsupervised adaptation is achieved by exploiting the hybrid model-based/data-driven architecture of KalmanNet, which internally predicts the next observation as the KF does. These internal features are then used to compute the loss rather than the state estimate at the output of the system. With the capability of unsupervised learning, one can use KalmanNet not only to track the hidden state, but also to adapt to variations in the state space (SS) model. We numerically demonstrate that when the noise statistics are unknown, unsupervised KalmanNet achieves a similar performance to KalmanNet with supervised learning. We also show that we can adapt a pre-trained KalmanNet to changing SS models without providing additional data thanks to the unsupervised capabilities.

eess.SP↗

arXiv2021

Task-Based Analog-to-Digital Converters

Obtaining digital representations of multivariate continuous-time (CT) signals is a challenge encountered in many signal processing systems. In practice, these signals are often acquired to extract some underlying information, i.e., for a specific task. Employing conventional task-agnostic analog-to-digital converters (ADCs), typically designed to minimize the mean squared error (MSE) in reconstructing the CT input signal, can be costly and energy-inefficient in such cases. In this work, we study task-based ADCs, which are designed to obtain a digital representation of a multivariate CT input process with the goal of recovering an underlying statistically related parameter vector, referred to as \emph{the task}. The proposed system employs analog filtering, uniform sampling, and scalar uniform quantization of the input process before recovering the task vector using a linear digital recovery filter. We optimize the analog and digital filters and derive closed-form expressions for the achievable MSE in recovering the task vector from a set of analog signals when utilizing ADCs with a fixed sampling rate and amplitude resolution. Based on our derivation, we provide guidelines for designing practical acquisition systems subject to a constraint on the bit rate. Our analysis proves that the intuitive approaches of either recovering the task vector solely in digital or designing the analog filter to estimate the task vector are inferior to the proposed joint design. We then consider the recovery of a set of matched filter outputs under a rate budget. We numerically verify our theoretical observations and demonstrate that task-based ADCs substantially outperform analog matched filtering as well as applying the matched filter solely in the digital domain. [...]

cs.IT↗

arXiv2021

Near-Field Wireless Power Transfer with Dynamic Metasurface Antennas

Radio frequency wireless power transfer (WPT) enables charging low-power mobile devices without relying on wired infrastructure. Current existing WPT systems are typically designed assuming far-field propagation, where the radiated energy is steered in given angles, resulting in limited efficiency and possible radiation in undesired locations. When large arrays at high frequencies, such as DMA, are employed, WPT might take place in the radiating near-field (Fresnel) region where spherical wave propagation holds, rather than plane wave propagation as in the far-field. In this paper, we study WPT systems charging multiple devices in the Fresnel region, where the energy transmitter is equipped with an emerging DMA, exploring how the antenna configuration can exploit the spherical wavefront to generate focused energy beams. In particular, after presenting a mathematical model for DMA-based radiating near-field WPT systems, we characterize the weighted sum-harvested energy maximization problem of the considered system, and we propose an efficient solution to jointly design the DMA weights and digital precoding vector. Simulation results show that our design generates focused energy beams that are capable of improving energy transfer efficiency in the radiating near-field with minimal energy pollution.

eess.SP↗

arXiv2021

Federated Learning: A Signal Processing Perspective

The dramatic success of deep learning is largely due to the availability of data. Data samples are often acquired on edge devices, such as smart phones, vehicles and sensors, and in some cases cannot be shared due to privacy considerations. Federated learning is an emerging machine learning paradigm for training models across multiple edge devices holding local datasets, without explicitly exchanging the data. Learning in a federated manner differs from conventional centralized machine learning, and poses several core unique challenges and requirements, which are closely related to classical problems studied in the areas of signal processing and communications. Consequently, dedicated schemes derived from these areas are expected to play an important role in the success of federated learning and the transition of deep learning from the domain of centralized servers to mobile edge devices. In this article, we provide a unified systematic framework for federated learning in a manner that encapsulates and highlights the main challenges that are natural to treat using signal processing tools. We present a formulation for the federated learning paradigm from a signal processing perspective, and survey a set of candidate approaches for tackling its unique challenges. We further provide guidelines for the design and adaptation of signal processing and communication methods to facilitate federated learning at large scale.

eess.SP↗

arXiv2021

Near-field Wireless Power Transfer for 6G Internet-of-Everything Mobile Networks: Opportunities and Challenges

Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming that the devices are located in the far-field region of the power radiating antenna, resulting in a relatively low energy transfer efficiency. However, with the transition of 6G systems to mmWave frequencies combined with the usage of large-scale antennas, future WPT devices are likely to operate in the radiating near-field (Fresnel) region. In this article, we provide an overview of the opportunities and challenges which arise from radiating near-field WPT. In particular, we discuss about the possibility to realize beam focusing in near-field radiating conditions, and highlight its possible implications for WPT in future {IoE} networks. Besides, we overview some of the design challenges and research directions which arise from this emerging paradigm, including its simultaneous operation with wireless communications, radiating waveform considerations, hardware aspects, and operation with typical antenna architectures.

eess.SP↗

arXiv2021

Efficient Epileptic Seizure Detection Using CNN-Aided Factor Graphs

We propose a computationally efficient algorithm for seizure detection. Instead of using a purely data-driven approach, we develop a hybrid model-based/data-driven method, combining convolutional neural networks with factor graph inference. On the CHB-MIT dataset, we demonstrate that the proposed method can generalize well in a 6 fold leave-4-patientout evaluation. Moreover, it is shown that our algorithm can achieve as much as 5% absolute improvement in performance compared to previous data-driven methods. This is achieved while the computational complexity of the proposed technique is a fraction of the complexity of prior work, making it suitable for real-time seizure detection.

eess.SP↗

arXiv2021

FRaC: FMCW-Based Joint Radar-Communications System via Index Modulation

Dual function radar communications (DFRC) systems are attractive technologies for autonomous vehicles, which utilize electromagnetic waves to constantly sense the environment while simultaneously communicating with neighbouring devices. An emerging approach to implement DFRC systems is to embed information in radar waveforms via index modulation (IM). Implementation of DFRC schemes in vehicular systems gives rise to strict constraints in terms of cost, power efficiency, and hardware complexity. In this paper, we extend IM-based DFRC systems to utilize sparse arrays and frequency modulated continuous waveforms (FMCWs), which are popular in automotive radar for their simplicity and low hardware complexity. The proposed FMCW-based radar-communications system (FRaC) operates at reduced cost and complexity by transmitting with a reduced number of radio frequency modules, combined with narrowband FMCW signalling. This is achieved via array sparsification in transmission, formulating a virtual multiple-input multiple-output array by combining the signals in one coherent processing interval, in which the narrowband waveforms are transmitted in a randomized manner. Performance analysis and numerical results show that the proposed radar scheme achieves similar resolution performance compared with a wideband radar system operating with a large receive aperture, while requiring less hardware overhead. For the communications subsystem, FRaC achieves higher rates and improved error rates compared to dual-function signalling based on conventional phase modulation.

eess.SP↗

arXiv2021

Beam Focusing for Near-Field Multi-User MIMO Communications

Large antenna arrays and high-frequency bands are two key features of future wireless communication systems. The combination of large-scale antennas with high transmission frequencies often results in the communicating devices operating in the near-field (Fresnel) region. In this paper, we study the potential of beam focusing, feasible in near-field operation, in facilitating high-rate multi-user downlink multiple-input multiple-output (MIMO) systems. As the ability to achieve beam focusing is dictated by the transmit antenna, we study near-field signaling considering different antenna structures, including fully-digital architectures, hybrid phase shifter-based precoders, and the emerging dynamic metasurface antenna (DMA) architecture for massive MIMO arrays. We first provide a mathematical model to characterize near-field wireless channels as well as the transmission pattern for the considered antenna architectures. Then, we formulate the beam focusing problem for the goal of maximizing the achievable sum-rate in multi-user networks. We propose efficient solutions based on the sum-rate maximization task for fully-digital, (phase shifters based-) hybrid and DMA architectures. Simulation results show the feasibility of the proposed beam focusing scheme for both single- and multi-user scenarios. In particular, the designed focused beams are such that users residing at the same angular direction can communicate reliably without interfering with each other, which is not achievable using conventional far-field beam steering.

eess.SP↗

arXiv2021

FedRec: Federated Learning of Universal Receivers over Fading Channels

Wireless communications is often subject to channel fading. Various statistical models have been proposed to capture the inherent randomness in fading, and conventional model-based receiver designs rely on accurate knowledge of this underlying distribution, which, in practice, may be complex and intractable. In this work, we propose a neural network-based symbol detection technique for downlink fading channels, which is based on the maximum a-posteriori probability (MAP) detector. To enable training on a diverse ensemble of fading realizations, we propose a federated training scheme, in which multiple users collaborate to jointly learn a universal data-driven detector, hence the name FedRec. The performance of the resulting receiver is shown to approach the MAP performance in diverse channel conditions without requiring knowledge of the fading statistics, while inducing a substantially reduced communication overhead in its training procedure compared to centralized training.

cs.IT↗

arXiv2021

Reconfigurable Intelligent Surfaces for Rich Scattering Wireless Communications: Recent Experiments, Challenges, and Opportunities

Recent advances in the fabrication and experimentation of Reconfigurable Intelligent Surfaces (RISs) have motivated the concept of the smart radio environment, according to which the propagation of information-bearing waveforms in the wireless medium is amenable to programmability. Although the vast majority of recent experimental research on RIS-empowered wireless communications gravitates around narrowband beamforming in quasi-free space, RISs are foreseen to revolutionize wideband wireless connectivity in dense urban as well as indoor scenarios, which are usually characterized as strongly reverberant environments exhibiting severe multipath conditions. In this article, capitalizing on recent physics-driven experimental explorations of RIS-empowered wave propagation control in complex scattering cavities, we identify the potential of the spatiotemporal control offered by RISs to boost wireless communications in rich scattering channels via two case studies. First, an RIS is deployed to shape the multipath channel impulse response, which is shown to enable higher achievable communication rates. Second, the RIS-tunable propagation environment is leveraged as an analog multiplexer to localize non-cooperative objects using wave fingerprints, even when they are outside the line of sight. Future research challenges and opportunities in the algorithmic design and experimentation of smart rich scattering wireless environments enabled by RISs for sixth Generation (6G) wireless communications are discussed.

cs.IT↗

arXiv2021

Meta-ViterbiNet: Online Meta-Learned Viterbi Equalization for Non-Stationary Channels

Deep neural networks (DNNs) based digital receivers can potentially operate in complex environments. However, the dynamic nature of communication channels implies that in some scenarios, DNN-based receivers should be periodically retrained in order to track temporal variations in the channel conditions. To this aim, frequent transmissions of lengthy pilot sequences are generally required, at the cost of substantial overhead. In this work we propose a DNN-aided symbol detector, Meta-ViterbiNet, that tracks channel variations with reduced overhead by integrating three complementary techniques: 1) We leverage domain knowledge to implement a model-based/data-driven equalizer, ViterbiNet, that operates with a relatively small number of trainable parameters; 2) We tailor a meta-learning procedure to the symbol detection problem, optimizing the hyperparameters of the learning algorithm to facilitate rapid online adaptation; and 3) We adopt a decision-directed approach based on coded communications to enable online training with short-length pilot blocks. Numerical results demonstrate that Meta-ViterbiNet operates accurately in rapidly-varying channels, outperforming the previous best approach, based on ViterbiNet or conventional recurrent neural networks without meta-learning, by a margin of up to 0.6dB in bit error rate in various challenging scenarios.

cs.IT↗