arXiv subjects

Nir Shlezinger

Publications and source records attributed to Nir Shlezinger.

At least 145 records · Page 8Linked to original sources

arXiv2021

LoRD-Net: Unfolded Deep Detection Network with Low-Resolution Receivers

The need to recover high-dimensional signals from their noisy low-resolution quantized measurements is widely encountered in communications and sensing. In this paper, we focus on the extreme case of one-bit quantizers, and propose a deep detector entitled LoRD-Net for recovering information symbols from one-bit measurements. Our method is a model-aware data-driven architecture based on deep unfolding of first-order optimization iterations. LoRD-Net has a task-based architecture dedicated to recovering the underlying signal of interest from the one-bit noisy measurements without requiring prior knowledge of the channel matrix through which the one-bit measurements are obtained. The proposed deep detector has much fewer parameters compared to black-box deep networks due to the incorporation of domain-knowledge in the design of its architecture, allowing it to operate in a data-driven fashion while benefiting from the flexibility, versatility, and reliability of model-based optimization methods. LoRD-Net operates in a blind fashion, which requires addressing both the non-linear nature of the data-acquisition system as well as identifying a proper optimization objective for signal recovery. Accordingly, we propose a two-stage training method for LoRD-Net, in which the first stage is dedicated to identifying the proper form of the optimization process to unfold, while the latter trains the resulting model in an end-to-end manner. We numerically evaluate the proposed receiver architecture for one-bit signal recovery in wireless communications and demonstrate that the proposed hybrid methodology outperforms both data-driven and model-based state-of-the-art methods, while utilizing small datasets, on the order of merely $\sim 500$ samples, for training.

eess.SP↗

arXiv2021

Model-Based Machine Learning for Communications

We present an introduction to model-based machine learning for communication systems. We begin by reviewing existing strategies for combining model-based algorithms and machine learning from a high level perspective, and compare them to the conventional deep learning approach which utilizes established deep neural network (DNN) architectures trained in an end-to-end manner. Then, we focus on symbol detection, which is one of the fundamental tasks of communication receivers. We show how the different strategies of conventional deep architectures, deep unfolding, and DNN-aided hybrid algorithms, can be applied to this problem. The last two approaches constitute a middle ground between purely model-based and solely DNN-based receivers. By focusing on this specific task, we highlight the advantages and drawbacks of each strategy, and present guidelines to facilitate the design of future model-based deep learning systems for communications.

eess.SP↗

arXiv2020

UVeQFed: Universal Vector Quantization for Federated Learning

Traditional deep learning models are trained at a centralized server using labeled data samples collected from end devices or users. Such data samples often include private information, which the users may not be willing to share. Federated learning (FL) is an emerging approach to train such learning models without requiring the users to share their possibly private labeled data. In FL, each user trains its copy of the learning model locally. The server then collects the individual updates and aggregates them into a global model. A major challenge that arises in this method is the need of each user to efficiently transmit its learned model over the throughput limited uplink channel. In this work, we tackle this challenge using tools from quantization theory. In particular, we identify the unique characteristics associated with conveying trained models over rate-constrained channels, and propose a suitable quantization scheme for such settings, referred to as universal vector quantization for FL (UVeQFed). We show that combining universal vector quantization methods with FL yields a decentralized training system in which the compression of the trained models induces only a minimum distortion. We then theoretically analyze the distortion, showing that it vanishes as the number of users grows. We also characterize the convergence of models trained with the traditional federated averaging method combined with UVeQFed to the model which minimizes the loss function. Our numerical results demonstrate the gains of UVeQFed over previously proposed methods in terms of both distortion induced in quantization and accuracy of the resulting aggregated model.

cs.LG↗

arXiv2020

Serial Quantization for Sparse Time Sequences

Sparse signals are encountered in a broad range of applications. In order to process these signals using digital hardware, they must be first sampled and quantized using an analog-to-digital convertor (ADC), which typically operates in a serial scalar manner. In this work, we propose a method for serial quantization of sparse time sequences (SQuaTS) inspired by group testing theory, which is designed to reliably and accurately quantize sparse signals acquired in a sequential manner using serial scalar ADCs. Unlike previously proposed approaches which combine quantization and compressed sensing (CS), our SQuaTS scheme updates its representation on each incoming analog sample and does not require the complete signal to be observed and stored in analog prior to quantization. We characterize the asymptotic tradeoff between accuracy and quantization rate of SQuaTS as well as its computational burden. We also propose a variation of SQuaTS, which trades rate for computational efficiency. Next, we show how SQuaTS can be naturally extended to distributed quantization scenarios, where a set of jointly sparse time sequences are acquired individually and processed jointly. Our numerical results demonstrate that SQuaTS is capable of achieving substantially improved representation accuracy over previous CS-based schemes without requiring the complete set of analog signal samples to be observed prior to its quantization, making it an attractive approach for acquiring sparse time sequences.

cs.IT↗

arXiv2020

Over-the-Air Federated Learning from Heterogeneous Data

Federated learning (FL) is a framework for distributed learning of centralized models. In FL, a set of edge devices train a model using their local data, while repeatedly exchanging their trained updates with a central server. This procedure allows tuning a centralized model in a distributed fashion without having the users share their possibly private data. In this paper, we focus on over-the-air (OTA) FL, which has been suggested recently to reduce the communication overhead of FL due to the repeated transmissions of the model updates by a large number of users over the wireless channel. In OTA FL, all users simultaneously transmit their updates as analog signals over a multiple access channel, and the server receives a superposition of the analog transmitted signals. However, this approach results in the channel noise directly affecting the optimization procedure, which may degrade the accuracy of the trained model. We develop a Convergent OTA FL (COTAF) algorithm which enhances the common local stochastic gradient descent (SGD) FL algorithm, introducing precoding at the users and scaling at the server, which gradually mitigates the effect of the noise. We analyze the convergence of COTAF to the loss minimizing model and quantify the effect of a statistically heterogeneous setup, i.e. when the training data of each user obeys a different distribution. Our analysis reveals the ability of COTAF to achieve a convergence rate similar to that achievable over error-free channels. Our simulations demonstrate the improved convergence of COTAF over vanilla OTA local SGD for training using non-synthetic datasets. Furthermore, we numerically show that the precoding induced by COTAF notably improves the convergence rate and the accuracy of models trained via OTA FL.

cs.LG↗

arXiv2020

BiLiMO: Bit-Limited MIMO Radar via Task-Based Quantization

Recent years have witnessed growing interest in reduced cost radar systems operating with low power. Multiple-input multiple-output (MIMO) radar technology is known to achieve high performance sensing by probing with multiple orthogonal waveforms. However, implementing a low cost low power MIMO radar is challenging. One of the reasons for this difficulty stems from the increased cost and power consumption required by analog-to-digital convertors (ADCs) in acquiring the multiple waveforms at the radar receiver. In this work we study reduced cost MIMO radar receivers restricted to operate with low resolution ADCs. We design bit-limited MIMO radar (BiLiMO) receivers which are capable of accurately recovering their targets while operating under strict resolution constraints. This is achieved by applying an additional analog filter to the acquired waveforms, and designing the overall hybrid analog-digital system to facilitate target identification using task-based quantization methods. In particular, we exploit the fact that the target parameters can be recovered from a compressed representation of the received waveforms. We thus tune the acquisition system to recover this representation with minimal distortion, from which the targets can be extracted in digital, and characterize the achievable error in identifying the targets. Our numerical results demonstrate that the proposed BiLiMO receiver operating with a bit budget of one bit per sample achieves target recovery performance which approaches that of costly MIMO radars operating with unlimited resolution ADCs, while substantially outperforming MIMO receivers operating only in the digital domain under the same bit limitations.

eess.SP↗

arXiv2020

ViterbiNet: A Deep Learning Based Viterbi Algorithm for Symbol Detection

Symbol detection plays an important role in the implementation of digital receivers. In this work, we propose ViterbiNet, which is a data-driven symbol detector that does not require channel state information (CSI). ViterbiNet is obtained by integrating deep neural networks (DNNs) into the Viterbi algorithm. We identify the specific parts of the Viterbi algorithm that are channel-model-based, and design a DNN to implement only those computations, leaving the rest of the algorithm structure intact. We then propose a meta-learning based approach to train ViterbiNet online based on recent decisions, allowing the receiver to track dynamic channel conditions without requiring new training samples for every coherence block. Our numerical evaluations demonstrate that the performance of ViterbiNet, which is ignorant of the CSI, approaches that of the CSI-based Viterbi algorithm, and is capable of tracking time-varying channels without needing instantaneous CSI or additional training data. Moreover, unlike conventional Viterbi detection, ViterbiNet is robust to CSI uncertainty, and it can be reliably implemented in complex channel models with constrained computational burden. More broadly, our results demonstrate the conceptual benefit of designing communication systems to that integrate DNNs into established algorithms.

cs.LG↗

arXiv2020

eSampling: Energy Harvesting ADCs

Analog-to-digital converters (ADCs) allow physical signals to be processed using digital hardware. The power consumed in conversion grows with the sampling rate and quantization resolution, imposing a major challenge in power-limited systems. A common ADC architecture is based on sample-and-hold (S/H) circuits, where the analog signal is being tracked only for a fraction of the sampling period. In this paper, we propose the concept of eSampling ADCs, which harvest energy from the analog signal during the time periods where the signal is not being tracked. This harvested energy can be used to supplement the ADC itself, paving the way to the possibility of zero-power consumption and power-saving ADCs. We analyze the tradeoff between the ability to recover the sampled signal and the energy harvested, and provide guidelines for setting the sampling rate in the light of accuracy and energy constraints. Our analysis indicates that eSampling ADCs operating with up to 12 bits per sample can acquire bandlimited analog signals such that they can be perfectly recovered without requiring power from the external source. Furthermore, our theoretical results reveal that eSampling ADCs can in fact save power by harvesting more energy than they consume. To verify the feasibility of eSampling ADCs, we present a circuit-level design using standard complementary metal oxide semiconductor (CMOS) 65 nm technology. An eSampling 8-bit ADC which samples at 40 MHZ is designed on a Cadence Virtuoso platform. Our experimental study involving Nyquist rate sampling of bandlimited signals demonstrates that such ADCs are indeed capable of harvesting more energy than that spent during analog-to-digital conversion, without affecting the accuracy.

eess.SP↗

arXiv2020

Spatial Modulation for Joint Radar-Communications Systems: Design, Analysis, and Hardware Prototype

Dual-function radar-communications (DFRC) systems implement radar and communication functionalities on a single platform. Jointly designing these subsystems can lead to substantial gains in performance as well as size, cost, and power consumption. In this paper, we propose a DFRC system, which utilizes generalized spatial modulation (GSM) to realize coexisting radar and communications waveforms. Our proposed GSM-based scheme, referred to as spatial modulation based communication-radar (SpaCoR) system, allocates antenna elements among the subsystems based on the transmitted message, thus achieving increased communication rates by embedding additional data bits in the antenna selection. We formulate the resulting signal models, and present a dedicated radar processing scheme. To evaluate the radar performance, we characterize the statistical properties of the transmit beam pattern. Then, we present a hardware prototype of the proposed DFRC system, demonstrating the feasibility of the scheme. Our results show that the proposed GSM system achieves improved communication performance compared to techniques utilizing fixed allocations operating at the same data rate. For the radar subsystem, our experiments show that the spatial agility induced by the GSM transmission improves the angular resolution and reduces the sidelobe level in the transmit beam pattern compared to using fixed antenna allocations.

eess.SP↗

arXiv2020

Dynamic Metasurface Antennas for 6G Extreme Massive MIMO Communications

Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in shaping the propagation environment. This article presents an alternative application of metasurfaces for wireless communications as active reconfigurable antennas with advanced analog signal processing capabilities for next generation transceivers. We review the main characteristics of metasurfaces used for radiation and reception, and analyze their main advantages as well as their effect on the ability to reliably communicate in wireless networks. As current studies unveil only a portion of the potential of metasurfaces, we detail a list of exciting research and implementation challenges which arise from the application of metasurface antennas for wireless transceivers.

eess.SP↗

arXiv2020

DeepSIC: Deep Soft Interference Cancellation for Multiuser MIMO Detection

Digital receivers are required to recover the transmitted symbols from their observed channel output. In multiuser multiple-input multiple-output (MIMO) setups, where multiple symbols are simultaneously transmitted, accurate symbol detection is challenging. A family of algorithms capable of reliably recovering multiple symbols is based on interference cancellation. However, these methods assume that the channel is linear, a model which does not reflect many relevant channels, as well as require accurate channel state information (CSI), which may not be available. In this work we propose a multiuser MIMO receiver which learns to jointly detect in a data-driven fashion, without assuming a specific channel model or requiring CSI. In particular, we propose a data-driven implementation of the iterative soft interference cancellation (SIC) algorithm which we refer to as DeepSIC. The resulting symbol detector is based on integrating dedicated machine-learning (ML) methods into the iterative SIC algorithm. DeepSIC learns to carry out joint detection from a limited set of training samples without requiring the channel to be linear and its parameters to be known. Our numerical evaluations demonstrate that for linear channels with full CSI, DeepSIC approaches the performance of iterative SIC, which is comparable to the optimal performance, and outperforms previously proposed ML-based MIMO receivers. Furthermore, in the presence of CSI uncertainty, DeepSIC significantly outperforms model-based approaches. Finally, we show that DeepSIC accurately detects symbols in non-linear channels, where conventional iterative SIC fails even when accurate CSI is available.

eess.SP↗

arXiv2020

Joint Radar-Communications Strategies for Autonomous Vehicles

Self-driving cars constantly asses their environment in order to choose routes, comply with traffic regulations, and avoid hazards. To that aim, such vehicles are equipped with wireless communications transceivers as well as multiple sensors, including automotive radars. The fact that autonomous vehicles implement both radar and communications motivates designing these functionalities in a joint manner. Such dual function radar-communications (DFRC) designs are the focus of a large body of recent works. These approaches can lead to substantial gains in size, cost, power consumption, robustness, and performance, especially when both radar and communications operate in the same range, which is the case in vehicular applications. This article surveys the broad range of DFRC strategies and their relevance to autonomous vehicles. We identify the unique characteristics of automotive radar technologies and their combination with wireless communications requirements of self-driving cars. Then, we map the existing DFRC methods along with their pros and cons in the context of autonomous vehicles, and discuss the main challenges and possible research directions for realizing their full potential.

cs.IT↗

arXiv2020

RF Chain Reduction for MIMO Systems: A Hardware Prototype

Radio frequency (RF) chain circuits play a major role in digital receiver architectures, allowing passband communication signals to be processed in baseband. When operating at high frequencies, these circuits tend to be costly. This increased cost imposes a major limitation on future multiple-input multiple-output (MIMO) communication technologies. A common approach to mitigate the increased cost is to utilize hybrid architectures, in which the received signal is combined in analog into a lower dimension, thus reducing the number of RF chains. In this work we study the design and hardware implementation of hybrid architectures via minimizing channel estimation error. We first derive the optimal solution for complex-gain combiners and propose an alternating optimization algorithm for phase-shifter combiners. We then present a hardware prototype implementing analog combining for RF chain reduction. The prototype consists of a specially designed configurable combining board as well as a dedicated experimental setup. Our hardware prototype allows evaluating the effect of analog combining in MIMO systems using actual communication signals. The experimental study, which focuses on channel estimation accuracy in MIMO channels, demonstrates that using the proposed prototype, the achievable channel estimation performance is within a small gap in a statistical sense from that obtained using a costly receiver in which each antenna is connected to a dedicated RF chain.

eess.SP↗

arXiv2020

The Rate Distortion Function of Asynchronously Sampled Memoryless Cyclostationary Gaussian Processes

Man-made communications signals are typically modelled as continuous-time (CT) wide-sense cyclostationary (WSCS) processes. As modern processing is digital, it operates on sampled versions of the CT signals. When sampling is applied to a CT WSCS process, the statistics of the resulting discrete-time (DT) process depends on the relationship between the sampling interval and the period of the statistics of the CT process: When these two parameters have a common integer factor, then the DT process is WSCS. This situation is referred to as synchronous sampling. When this is not the case, which is referred to as asynchronous sampling, the resulting DT process is wide-sense almost cyclostationary (WSACS). In this work, we study the fundamental tradeoff of sources codes applied to sampled CT WSCS processes, namely, their rate-distortion function (RDF). We note that RDF characterization for the case of synchronous sampling directly follows from classic information-theoretic tools utilizing ergodicity and the law of large numbers; however, when sampling is asynchronous, the resulting process is not information stable. In such cases, commonly used information-theoretic tools are inapplicable to RDF analysis, which poses a major challenge. Using the information spectrum framework, we show that the RDF for asynchronous sampling in the low distortion regime can be expressed as the limit superior of a sequence of RDFs in which each element corresponds to the RDF of a synchronously sampled WSCS process (but their limit is not guaranteed to exist). The resulting characterization allows us to introduce novel insights on the relationship between sampling synchronization and RDF. For example, we demonstrate that, differently from stationary processes, small differences in the sampling rate and the sampling time offset can notably affect the RDF of sampled CT WSCS processes.

cs.IT↗

arXiv2020

Multi-Carrier Agile Phased Array Radar

Modern radar systems are expected to operate reliably in congested environments. A candidate technology for meeting these demands is frequency agile radar (FAR), which randomly changes its carrier frequencies. FAR is known to improve the electronic counter-countermeasures (ECCM) performance while facilitating operation in congested setups. To enhance the target recovery performance of FAR in complex electromagnetic environments, we propose two radar schemes extending FAR to multi-carrier waveforms. The first is Wideband Multi-carrier Agile Radar (WMAR), which transmits/receives wideband waveforms simultaneously with every antenna. To mitigate the demanding hardware requirements associated with wideband waveforms used by WMAR, we next propose multi-Carrier AgilE phaSed Array Radar (CAESAR). CAESAR uses narrowband monotone waveforms, thus facilitating ease of implementation of the system, while introducing {\em spatial agility}. We characterize the transmitted and received signals of the proposed schemes, and develop an algorithm for recovering the targets, based on concepts from compressed sensing to estimate the range-Doppler parameters of the targets. We then derive conditions which guarantee their accurate reconstruction. Our numerical study demonstrates that both multi-carrier schemes improve performance compared to FAR while maintaining its practical benefits. We also demonstrate that the performance of CAESAR, which uses monotone waveforms, is within a small gap from the wideband radar.

eess.SP↗

arXiv2020

Data-Driven Symbol Detection via Model-Based Machine Learning

The design of symbol detectors in digital communication systems has traditionally relied on statistical channel models that describe the relation between the transmitted symbols and the observed signal at the receiver. Here we review a data-driven framework to symbol detection design which combines machine learning (ML) and model-based algorithms. In this hybrid approach, well-known channel-model-based algorithms such as the Viterbi method, BCJR detection, and multiple-input multiple-output (MIMO) soft interference cancellation (SIC) are augmented with ML-based algorithms to remove their channel-model-dependence, allowing the receiver to learn to implement these algorithms solely from data. The resulting data-driven receivers are most suitable for systems where the underlying channel models are poorly understood, highly complex, or do not well-capture the underlying physics. Our approach is unique in that it only replaces the channel-model-based computations with dedicated neural networks that can be trained from a small amount of data, while keeping the general algorithm intact. Our results demonstrate that these techniques can yield near-optimal performance of model-based algorithms without knowing the exact channel input-output statistical relationship and in the presence of channel state information uncertainty.

eess.SP↗

arXiv2020

Task-Based Quantization with Application to MIMO Receivers

Multiple-input multiple-output (MIMO) systems are required to communicate reliably at high spectral bands using a large number of antennas, while operating under strict power and cost constraints. In order to meet these constraints, future MIMO receivers are expected to operate with low resolution quantizers, namely, utilize a limited number of bits for representing their observed measurements, inherently distorting the digital representation of the acquired signals. The fact that MIMO receivers use their measurements for some task, such as symbol detection and channel estimation, other than recovering the underlying analog signal, indicates that the distortion induced by bit-constrained quantization can be reduced by designing the acquisition scheme in light of the system task, i.e., by {\em task-based quantization}. In this work we survey the theory and design approaches to task-based quantization, presenting model-aware designs as well as data-driven implementations. Then, we show how one can implement a task-based bit-constrained MIMO receiver, presenting approaches ranging from conventional hybrid receiver architectures to structures exploiting the dynamic nature of metasurface antennas. This survey narrows the gap between theoretical task-based quantization and its implementation in practice, providing concrete algorithmic and hardware design principles for realizing task-based MIMO receivers.

cs.IT↗

arXiv2020

Joint Transmit Beamforming for Multiuser MIMO Communication and MIMO Radar

Future wireless communication systems are expected to explore spectral bands typically used by radar systems, in order to overcome spectrum congestion of traditional communication bands. Since in many applications radar and communication share the same platform, spectrum sharing can be facilitated by joint design as dual function radar-communications system. In this paper, we propose a joint transmit beamforming model for a dual-function multiple-input-multiple-output (MIMO) radar and multiuser MIMO communication transmitter sharing the spectrum and an antenna array. The proposed dual-function system transmits the weighted sum of independent radar waveform and communication symbols, forming multiple beams towards the radar targets and the communication receivers, respectively. The design of the weighting coefficients is formulated as an optimization problem whose objective is the performance of the MIMO radar transmit beamforming, while guaranteeing that the signal-to-interference-plus-noise ratio (SINR) at each communication user is higher than a given threshold. Despite the non-convexity of the proposed optimization problem, it can be relaxed into a convex one, which can be solved in polynomial time, and we prove that the relaxation is tight. Then, we propose a reduced complexity design based on zero-forcing the inter-user interference and radar interference. Unlike previous works, which focused on the transmission of communication symbols to synthesize a radar transmit beam pattern, our method provides more degrees of freedom for MIMO radar and is thus able to obtain improved radar performance, as demonstrated in our simulation study. Furthermore, the proposed dual-function scheme approaches the radar performance of the radar-only scheme, i.e., without spectrum sharing, under reasonable communication quality constraints.

eess.SP↗