arXiv subjects

Norbert Koch

Publications and source records attributed to Norbert Koch.

16 recordsLinked to original sources

arXiv2025

Optimizing carrier balance in CsPbBr3 nanocrystal LEDs: The role of alkyl ligands and polar electron transport layers

The study of lead halide perovskite nanocrystal based light-emitting diodes (LEDs) has advanced significantly, with notable improvements in stability and optical properties. However, optimizing charge carrier injection and transport remains a challenge. Efficient electroluminescence requires a balanced transport of both holes and electrons within the emitting material. Here, we investigate cubic CsPbBr\textsubscript{3} nanocrystals passivated with oleylamine and oleic acid, comparing them to ligand-exchanged nanocrystals with didodecyldimethylammonium bromide (DDABr). Nuclear magnetic resonance spectroscopy and transmission electron microscopy confirm successful ligand exchange, revealing reduced ligand coverage in DDABr-treated nanocrystals. Photoelectron spectroscopy, spectroelectrochemistry, and single-carrier devices indicate improved hole injection in DDABr-capped nanocrystals. Density functional theory calculations further reveal the influence of ligand type and coverage on energy levels, with oleic acid introducing localized states in native nanocrystals. Additionally, incorporation of a polar electron transport layer (ETL) enhances LED performance by over an order of magnitude in DDABr-capped nanocrystals, driven by improved charge balance arising from the spontaneous orientation polarization (SOP) of the ETL. These findings highlight the critical role of ligand selection, passivation degree, and charge transport control by the adjacent organic transport layers in optimizing LED efficiency.

cond-mat.mtrl-sci↗

arXiv2025

Phenothiazine-Based Self-Assembled Monolayer with Thiophene Head Groups Minimizes Buried Interface Losses in Tin Perovskite Solar Cells

Self-assembled monolayers (SAMs) have revolutionized the fabrication of lead-based perovskite solar cells, but they remain underexplored in tin perovskite systems. PEDOT is the material of choice for hole-selective layers in tin perovskite solar cells (TPSCs), but presents challenges for both performance and stability. MeO-2PACz, the only SAM reported for Sn perovskites, enables device fabrication but consistently underperforms when compared to PEDOT. In this work, we identify that MeO-2PACz's limitations arise from excessively strong interactions with perovskite surface and poor lattice matching, leading to poor interface quality. To overcome these issues, we design, synthesize, and characterize a novel SAM-forming molecule called Th-2EPT. Th-2EPT optimizes coordination strength and improves lattice compatibility, contributing to the creation of a high-quality buried interface and dramatically suppressing non-radiative recombination. We used Density Functional Theory (DFT) to evaluate coordination strength and lattice compatibility, complemented by nanosecond-resolution optical characterization techniques to confirm significantly reduced interfacial recombination and enhanced carrier lifetimes in Th-2EPT-Perovskite films. With Th-2EPT, we demonstrated the first SAM-based tin perovskite solar cells to outperform PEDOT-based devices, delivering a record power conversion efficiency (PCE) of 8.2% with a DMSO-free solvent system.

cond-mat.mtrl-sci↗

arXiv2024

Surface doping of rubrene single crystals by molecular electron donors and acceptors

The surface molecular doping of organic semiconductors can play an important role in the development of organic electronic or optoelectronic devices. Single-crystal rubrene remains a leading molecular candidate for applications in electronics due to its high hole mobility. In parallel, intensive research into the fabrication of flexible organic electronics requires the careful design of functional interfaces to enable optimal device characteristics. To this end, the present work seeks to understand the effect of surface molecular doping on the electronic band structure of rubrene single crystals. Our angle-resolved photoemission measurements reveal that the Fermi level moves in the band gap of rubrene depending on the direction of surface electron-transfer reactions with the molecular dopants, yet the valence band dispersion remains essentially unperturbed. This indicates that surface electron-transfer doping of a molecular single crystal can effectively modify the near-surface charge density, while retaining good charge-carrier mobility.

cond-mat.mtrl-sci↗

arXiv2023

Interface Modification for Energy Levels Alignment and Charge Extraction in CsPbI$_3$ Perovskite Solar Cells

In perovskite solar cells (PSCs) energy levels alignment and charge extraction at the interfaces are the essential factors directly affecting the device performance. In this work, we present a modified interface between all-inorganic CsPbI$_3$ perovskite and its hole selective contact (Spiro-OMeTAD), realized by a dipole molecule trioctylphosphine oxide (TOPO), to align the energy levels. On a passivated perovskite film, by n-Octyl ammonium Iodide (OAI), we created an upward surface band-bending at the interface by TOPO treatment. This improved interface by the dipole molecule induces a better energy level alignment and enhances the charge extraction of holes from the perovskite layer to the hole transport material. Consequently, a Voc of 1.2 V and high-power conversion efficiency (PCE) of over 19% were achieved for inorganic CsPbI$_3$ perovskite solar cells. Further, to demonstrate the effect of the TOPO dipole molecule, we present a layer-by-layer charge extraction study by transient surface photovoltage technique (trSPV) accomplished by charge transport simulation.

cond-mat.mtrl-sci↗

arXiv2022

Quantum Efficiency Enhancement of Lead-Halide Perovskite Nanocrystal LEDs by Organic Lithium Salt Treatment

Surface-defect passivation is key to achieving high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance cation vacancies, while, on the other side, the excess halides are believed to stabilise the colloids. Here, we report an organic lithium salt, viz. LiTFSI, as a halide-free surface passivation on perovskite nanocrystals. We show that the treatment LiTFSI has multiple beneficial effects on lead halide perovskite nanocrystals and LEDs derived from them. We obtain higher photoluminescence quantum yield and longer exciton lifetime, and a radiation pattern that is more favourable for light outcoupling. The ligand-induced dipoles on the nanocrystal surface shift their energy levels toward lower hole-injection barrier. Overall, these effects add up to a four- to seven-fold boost of the external quantum efficiency in proof-of-concept LED structures, depending on the color of the used lead halide perovskite nanocrystal emitters.

physics.app-ph↗

arXiv2021

Two-dimensional plasmonic polarons in n-doped monolayer MoS2

We report experimental and theoretical evidence of strong electron-plasmon interaction in n-doped single-layer MoS2. Angle-resolved photoemission spectroscopy (ARPES) measurements reveal the emergence of distinctive signatures of polaronic coupling in the electron spectral function. Calculations based on many-body perturbation theory illustrate that electronic coupling to two-dimensional (2D) carrier plasmons provides an exhaustive explanation of the experimental spectral features and their energies. These results constitute compelling evidence of the formation of plasmon-induced polaronic quasiparticles, suggesting that highly-doped transition-metal dichalcogenides may provide a new platform to explore strong-coupling phenomena between electrons and plasmons in 2D.

cond-mat.str-el↗

arXiv2021

Temperature-dependent electronic ground state charge transfer in van der Waals heterostructures

Electronic charge rearrangement between components of a heterostructure is the fundamental principle to reach the electronic ground state. It is acknowledged that the density of states distribution of the components governs the amount of charge transfer, but a notable dependence on temperature has not yet been considered, particularly for weakly interacting systems. Here, we experimentally observe that the amount of ground state charge transfer in a van der Waals heterostructure formed by monolayer MoS2 sandwiched between graphite and a molecular electron acceptor layer increases by a factor of three when going from 7 K to room temperature. State-of-the-art electronic structure calculations of the full heterostructure that account for nuclear thermal fluctuations reveal intra-component electron-phonon coupling and inter-component electronic coupling as the key factors determining the amount of charge transfer. This conclusion is rationalized by a model applicable to multi-component van der Waals heterostructures.

cond-mat.mtrl-sci↗

arXiv2019

Microstructure and Elastic Constants of Transition Metal Dichalcogenide Monolayers from Friction and Shear Force Microscopy

Optical and electrical properties of two-dimensional transition metal dichalcogenides (TMDCs) grown by chemical vapor deposition (CVD) are strongly determined by their microstructure. Consequently, the visualization of spatial structural variations is of paramount importance for future applications. Here we demonstrate how grain boundaries, crystal orientation, and strain fields can unambiguously be identified with combined lateral force microscopy (LFM) and transverse shear microscopy (TSM) for CVD-grown tungsten disulfide (WS2) monolayers, on length scales that are relevant for optoelectronic applications. Further, angle-dependent TSM measurements enable us to acquire the fourth-order elastic constants of monolayer WS2 experimentally. Our results facilitate high-throughput and nondestructive microstructure visualization of monolayer TMDCs, insights into their elastic properties, thus providing an accessible tool to support the development of advanced optoelectronic devices based on such two-dimensional semiconductors.

cond-mat.mtrl-sci↗

arXiv2019

Theory of optically induced F\"orster Coupling in van der Waals coupled Heterostuctures

We investigate the impact of optically induced F\"orster coupling in van der Waals heterostructures consisting of graphene and a monolayer transition metal dichalcogenide (TMD). In particular, we predict the corresponding dephasing rates and a fast energy transfer between the TMD layer and graphene being in the picosecond range. Exemplary we find a transition rate of thermalized excitons of about 4 ps$^{-1}$ in a MoSe$_2$-graphene stack at room temperature. This timescale is in good agreement with the recently measured exciton lifetime in this heterostructure.

cond-mat.mes-hall↗

arXiv2018

Dynamically switching the surface electronic and electrostatic properties of indium tin oxide electrodes with photochromic monolayers

The chemical modification of electrodes with organic materials is a common approach to tune the electronic and electrostatic landscape between interlayers in optoelectronic devices, thus facilitating charge injection at the electrode/semiconductor interfaces and improving their performance. The use of photochromic molecules for the surface modification allows dynamic control of the electronic and electrostatic properties of the electrode and thereby enables additional functionalities in such devices. Here, we show that the electronic properties of a transparent indium tin oxide (ITO) electrode are reversibly and dynamically modified by depositing organic photochromic switches (diarylethenes) in the form of self-assembled monolayers (SAMs). By combining a range of surface characterization and density functional theory calculations, we present a detailed picture of the SAM binding onto ITO, the packing density of molecules, their orientation, as well as the work function modification of the ITO surface due to the SAM deposition. Upon illumination with ultraviolet and green light, we observe a reversible shift of the frontier occupied levels by 0.7 eV, and concomitantly a reversible work function change of ca. 60 meV. Our results prove the viability of dynamic switching of the electronic properties of the electrode with external light stimuli, which could be used to fabricate ITO-based photo-switchable optoelectronic devices.

physics.chem-ph↗

arXiv2018

Pulsed thermal deposition of binary and ternary transition metal dichalcogenide monolayers and heterostructures

Application of transition metal dichalcogenides (TMDC) in photonic, optoelectronic or valleytronic devices requires the growth of continuous monolayers, heterostructures and alloys of different materials in a single process. We present a facile pulsed thermal deposition method which provides precise control over layer thickness and stoichiometry of two-dimensional systems. The versatility of the method is demonstrated on ternary monolayers of Mo$_{1-x}$W$_{x}$S$_{2}$ and on heterostructures combining metallic TaS$_{2}$ and semiconducting MoS$_{2}$ layers. The fabricated ternary monolayers cover the entire composition range of $x$ = 0...1 without phase separation. Band gap engineering and control over the spin-orbit coupling strength is demonstrated by absorption and photoluminescence spectroscopy. Vertical heterostructures are grown without intermixing. The formation of clean and atomically abrupt interfaces is evidenced by high-resolution transmission electron microscopy. Since both the metal components as well as the chalcogenides are thermally evaporated complex alloys and heterostructures can thus be prepared.

cond-mat.mtrl-sci↗

arXiv2018

Direct observation of state-filling at hybrid tin oxide/organic interfaces

Electroluminescence (EL) spectra from hybrid charge transfer excitons at metal oxide/organic type-II heterojunctions exhibit pronounced bias-induced spectral shifts. The reasons for this phenomenon have been discussed controversially and arguments for both electric field-induced effects as well as filling of trap states at the oxide surface have been put forward. Here, we combine the results from EL and photovoltaic measurements to eliminate the disguising effects of the series resistance. For SnOx combined with the conjugated polymer MeLPPP, we find a one-to-one correspondence between the blueshift of the EL peak and the increase of the quasi-Fermi level splitting at the hybrid heterojunction, which we unambiguously assign to state filling. Our data is resembled best by a model considering the combination an exponential density of states with a doped semiconductor.

cond-mat.mtrl-sci↗

arXiv2018

Modulation of the Work Function by the Atomic Structure of Strong Organic Electron Acceptors on H-Si(111)

Advances in hybrid organic/inorganic architectures for optoelectronics can be achieved by understanding how the atomic and electronic degrees of freedom cooperate or compete to yield the desired functional properties. Here we show how work-function changes are modulated by the structure of the organic components in model hybrid systems. We consider two cyano-quinodimethane derivatives (F4-TCNQ and F6-TCNNQ), which are strong electron-acceptor molecules, adsorbed on H-Si(111). From systematic structure searches employing range-separated hybrid HSE06 functional including many body van der Waals contributions, we predict that despite their similar composition, these molecules adsorb with significantly different densely-packed geometries in the first layer, due to strong intermolecular interaction. F6-TCNNQ shows a much stronger intralayer interaction (primarily due to van der Waals contributions) than F4-TCNQ in multilayered structures. The densely-packed geometries induce a large interface-charge rearrangement that result in a work-function increase of 1.11 and 1.76 eV for F4-TCNQ and F6-TCNNQ, respectively. Nuclear fluctuations at room temperature produce a wide distribution of work-function values, well modeled by a normal distribution with {\sigma}=0.17 eV. We corroborate our findings with experimental evidence of pronounced island formation for F6-TCNNQ on H-Si(111) and with the agreement of trends between predicted and measured work-function changes.

cond-mat.mtrl-sci↗

arXiv2018

High Open Circuit Voltages in pin-Type Perovskite Solar Cells through Strontium Addition

The incorporation of even small amounts of strontium (Sr) into lead-based quadruple cation hybrid perovskite solar cells results in a systematic increase of the open circuit voltage (Voc) in pin-type perovskite solar cells. We demonstrate via transient and absolute photoluminescence (PL) experiments how the incorporation of Sr significantly reduces the non-radiative recombination losses in the neat perovskite layer and specifically at the perovskite/C60 interface. We show that Sr segregates at the perovskite surface, where it induces important changes of morphology and energetics. Notably, the Sr-enriched surface exhibits a wider band gap and a more n-type character, accompanied with significantly stronger surface band bending. As a result, we observe a significant increase of the quasi-Fermi level splitting in the neat perovskite by reduced surface recombination and more importantly, a strong reduction of losses attributed to non-radiative recombination at the interface to the C60 electron-transporting layer. The resulting solar cells exhibited a Voc of 1.18 V, which could be further improved to nearly 1.23 V through addition of a thin polymer interlayer, bringing the non-radiative voltage loss to only 110 meV. Our work shows that simply adding a small amount of Sr to the precursor solutions induces a beneficial surface modification in the perovskite, without requiring any post treatment, resulting in high efficiency solar cells with power conversion efficiency (PCE) up to 20.3%. Our results demonstrate very high Voc values and efficiencies in Sr-containing quadruple cation perovskite pin solar cells and highlight the imperative importance of addressing and minimizing the recombination losses at the interface between perovskite and charge transporting layer.

physics.app-ph↗

arXiv2018

Stark Effect of Hybrid Charge Transfer States at Planar ZnO/Organic Interfaces

We investigate the bias-dependence of the hybrid charge transfer state emission at planar heterojunctions between the metal oxide acceptor ZnO and three donor molecules. The electroluminescence peak energy linearly increases with the applied bias, saturating at high fields. Variation of the organic layer thickness and deliberate change of the ZnO conductivity through controlled photo-doping allow us to confirm that this bias-induced spectral shifts relate to the internal electric field in the organic layer rather than the filling of states at the hybrid interface. We show that existing continuum models overestimate the hole delocalization and propose a simple electrostatic model in which the linear and quadratic Stark effects are explained by the electrostatic interaction of a strongly polarizable molecular cation with its mirror image.

cond-mat.soft↗

arXiv2013

Space Charge Transfer in Hybrid Inorganic/Organic Systems

We discuss density functional theory calculations of hybrid inorganic/organic systems (HIOS) that explicitly include the global effects of doping (i.e. position of the Fermi level) and the formation of a space-charge layer. For the example of tetrafluoro-tetracyanoquinodimethane (F4TCNQ) on the ZnO(000$\bar{1}$) surface we show that the adsorption energy and electron transfer depend strongly on the ZnO doping. The associated work function changes are large, for which the formation of space-charge layers is the main driving force. The prominent doping effects are expected to be quite general for charge-transfer interfaces in HIOS and important for device design.

cond-mat.mtrl-sci↗