arXiv subjects

Oliver A. Williams

Publications and source records attributed to Oliver A. Williams.

25 records · Page 2Linked to original sources

arXiv2014

Polishing of {100} and {111} single crystal diamond through the use of Chemical Mechanical Polishing

Diamond is one of the hardest and most difficult to polish materials. In this paper, the polishing of {111} and {100} single crystal diamond surfaces by standard Chemical Mechanical Polishing, as used in the silicon industry, is demonstrated. A Logitech Tribo Chemical Mechanical Polishing system with Logitech SF1 Syton and a polyurethane/polyester polishing pad was used. A reduction in roughness from 0.92 to 0.23 nm root mean square (RMS) and 0.31 to 0.09 nm RMS for {100} and {111} samples respectively was observed.

cond-mat.mtrl-sci↗

arXiv2014

Superconducting nano-mechanical diamond resonators

In this work we present the fabrication and characterization of superconducting nano-mechanical resonators made from nanocrystalline boron doped diamond (BDD). The oscillators can be driven and read out in their superconducting state and show quality factors as high as 40,000 at a resonance frequency of around 10 MHz. Mechanical damping is studied for magnetic fields up to 3 T where the resonators still show superconducting properties. Due to their simple fabrication procedure, the devices can easily be coupled to other superconducting circuits and their performance is comparable with state-of-the-art technology.

cond-mat.mes-hall↗

arXiv2013

Chemical mechanical polishing of thin film diamond

The demonstration that Nanocrystalline Diamond (NCD) can retain the superior Young's modulus (1,100 GPa) of single crystal diamond twinned with its ability to be grown at low temperatures (<450 °C) has driven a revival into the growth and applications of NCD thin films. However, owing to the competitive growth of crystals the resulting film has a roughness that evolves with film thickness, preventing NCD films from reaching their full potential in devices where a smooth film is required. To reduce this roughness, films have been polished using Chemical Mechanical Polishing (CMP). A Logitech Tribo CMP tool equipped with a polyurethane/polyester polishing cloth and an alkaline colloidal silica polishing fluid has been used to polish NCD films. The resulting films have been characterised with Atomic Force Microscopy, Scanning Electron Microscopy and X-ray Photoelectron Spectroscopy. Root mean square roughness values have been reduced from 18.3 nm to 1.7 nm over 25 μm$^2$, with roughness values as low as 0.42 nm over ~ 0.25 μm$^2$. A polishing mechanism of wet oxidation of the surface, attachment of silica particles and subsequent shearing away of carbon has also been proposed.

cond-mat.mtrl-sci↗

arXiv2013

Observation of conduction electron spin resonance in boron doped diamond

We observe the electron spin resonance of conduction electrons in boron doped (6400 ppm) superconducting diamond (Tc =3.8 K). We clearly identify the benchmarks of conduction electron spin resonance (CESR): the nearly temperature independent ESR signal intensity and its magnitude which is in good agreement with that expected from the density of states through the Pauli spin-susceptibility. The temperature dependent CESR linewidth weakly increases with increasing temperature which can be understood in the framework of the Elliott-Yafet theory of spin-relaxation. An anomalous and yet unexplained relation is observed between the g-factor, CESR linewidth, and the resistivity using the empirical Elliott-Yafet relation.

cond-mat.mtrl-sci↗

arXiv2013

A detailed analysis of the Raman spectra in superconducting boron doped nanocrystalline diamond

The light scattering properties of superconducting (Tc=3.8 K) heavily boron doped nanocrystalline diamond has been investigated by Raman spectroscopy using visible excitations. Fano type interference of the zone-center phonon line and the electronic continuum was identified. Lineshape analysis reveals Fano lineshapes with a significant asymmetry (q=-2). An anomalous wavelength dependence and small value of the Raman scattering amplitude is observed in agreement with previous studies.

cond-mat.mtrl-sci↗

arXiv2011

The Diamond SQUID

Diamond is an electrical insulator in its natural form. However, when doped with boron above a critical level (~0.25 at.%) it can be rendered superconducting at low temperatures with high critical fields. Here we present the realization of a micrometer scale superconducting quantum interference device $μ$-SQUID made from nanocrystalline boron doped diamond (BDD) films. Our results demonstrate that $μ$-SQUIDs made from superconducting diamond can be operated in magnetic fields as large as 4T independent on the field direction. This is a decisive step towards the detection of quantum motion in a diamond based nanomechanical oscillator.

cond-mat.mes-hall↗

arXiv2010

Nanostructures made from superconducting boron doped diamond

We report on the transport properties of nanostructures made from boron-doped superconducting diamond. Starting from nanocrystalline superconducting boron-doped diamond thin films, grown by Chemical Vapor Deposition, we pattern by electron-beam lithography devices with dimensions in the nanometer range. We show that even for such small devices, the superconducting properties of the material are well preserved: for wires of width less than $100\, nm$, we measure critical temperatures in the Kelvin range and critical field in the Tesla range.

cond-mat.mes-hall↗