arXiv subjects

Olivier Boulade

Publications and source records attributed to Olivier Boulade.

8 recordsLinked to original sources

arXiv2026

Characterization of IBEX LmAPD detectors at CEA for future low-noise NIR astronomy instruments

Future near-infrared (NIR) astronomy missions dedicated to photon-starved science cases, in particular an all-sky astrometric survey extending the legacy of Gaia into the NIR, as identified within the ESA Voyage~2050 programme, require large-format detectors combining sub-electron effective read noise with very low dark current. Linear-mode avalanche photodiodes (LmAPDs) based on HgCdTe meet this need by multiplying the photo-generated charge by an avalanche gain before the readout stage, thereby reducing the relative contribution of the read noise. We report the first electro-optical characterization of an IBEX detector, a $2048\times2048$, \SI{15}{\micro\meter}-pitch HgCdTe LmAPD array developed by Leonardo with the European Space Agency and operated at \SI{80}{\kelvin} on a dedicated bench at CEA-IRFU. We first discuss the central difficulty of characterizing an APD array, the degeneracy between avalanche gain, quantum efficiency (QE), and conversion gain in the measured response, and we then separate the measurements into two categories. Among the quantities that are directly measurable without assumptions, we report a signal-to-noise ratio for a CDS measurement that exceeds that of a Euclid-type H2RG above \SI{8}{\volt} pixel bias under identical low-flux conditions, a photo-response non-uniformity stable at the $\sim$10\% level, and a quantum efficiency-to-excess-noise ratio (QEFR) of \num{0.40} at \SI{10.5}{\volt}. Among the quantities derived under an explicit set of assumptions, we obtain a conversion gain corresponding to a sense-node capacitance of \SI{27}{\femto\farad}, a quantum efficiency of $46\pm12\%$ at \SI{2.5}{\volt}, and an excess noise factor $F=1.15\pm0.14$ at \SI{10.5}{\volt}. These results establish IBEX as a promising European large-format detector for future ultra-low-flux NIR instruments.

astro-ph.IM↗

arXiv2025

UNIONS: The Ultraviolet Near-Infrared Optical Northern Survey

The Ultraviolet Near-Infrared Optical Northern Survey (UNIONS) is a "collaboration of collaborations" that is using the Canada-France-Hawai'i Telescope, the Pan-STARRS telescopes, and the Subaru Observatory to obtain $ugriz$ images of a core survey region of 6250 deg$^2$ of the northern sky. The $10σ$ point source depth of the data, as measured within a 2-arcsecond diameter aperture, are $[u,g,r,i,z] = [23.7, 24.5, 24.2, 23.8, 23.3]$\ in AB magnitudes. UNIONS is addressing some of the most fundamental questions in astronomy, including the properties of dark matter, the growth of structure in the Universe from the very smallest galaxies to large-scale structure, and the assembly of the Milky Way. It is set to become the major ground-based legacy survey for the northern hemisphere for the next decade and provides an essential northern complement to the static-sky science of the Vera C. Rubin Observatory's Legacy Survey of Space and Time. UNIONS supports the core science mission of the {\it Euclid} space mission by providing the data necessary in the northern hemisphere for the calibration of the wavelength dependence of the {\it Euclid} point-spread function and derivation of photometric redshifts in the North Galactic Cap. This region contains the highest quality sky for {\it Euclid}, with low backgrounds from the zodiacal light, stellar density, extinction, and emission from Galactic cirrus. Here, we describe the UNIONS survey components, science goals, data products, and the current status of the overall program.

astro-ph.GA↗

arXiv2024

The detectability of high-redshift gamma-ray bursts near-infrared afterglows with CAGIRE

Context. Transient sky astronomy is entering a new era with the advent of the SVOM mission (Space Variable Objects Monitor), which was successfully launched on the 26th of June, 2024. The primary goal of SVOM is to monitor the hard X-ray sky searching for gamma-ray bursts (GRBs). On top of its on-board follow-up capabilities, SVOM will be backed by its ground segment composed of several facilities, of which the near-infrared imager CAGIRE. Mounted on the robotic telescope COLIBRI, it will be a unique instrument, able to perform fast follow-up of GRB afterglows in J and H bands, an ideal combination to catch high-redshift (z>6) and/or obscured GRBs. Aims. This paper aims at estimating the performances of CAGIRE for GRB near-infrared afterglow detection based on the characteristics of the detector and the specificities of the COLIBRI telescope. Quickly fading GRB afterglows pose challenges that should be addressed by adapting observing strategies to the capabilities of CAGIRE. Methods. We use an end-to-end image simulator to produce realistic CAGIRE images, taking into account results from the characterization of the ALFA detector used by CAGIRE. We implemented a GRB afterglow generator that simulates infrared lightcurves and spectra based on published observation of distant GRBs (z>6). Results. We retrieved the photometry of 9 GRB afterglows in various scenarios covered by CAGIRE. Catching afterglows as early as two minutes after burst allows the identification of a nIR counterpart in the brightest 4 events. When artificially redshifted even further away, these events remain detectable by CAGIRE up to z=9.6 in J band, and z=13.3 in H band, indicating the potential of CAGIRE to be a pioneer in the identification of the most distant GRBs to date.

astro-ph.HE↗

arXiv2024

Toward a universal characterization methodology for conversion gain measurement of CMOS APS: application to Euclid and SVOM

With the expanding integration of infrared instruments in astronomical missions, accurate per-pixel flux estimation for near-infrared hybrid detectors has become critical to the success of these missions. Based on CPPM's involvement in both SVOM/Colibri and Euclid missions, this study introduces universally applicable methods and framework for characterizing IR hybrid detectors and decorrelating their intrinsic properties. The characterization framework, applied to the ALFA detector and \Euclid's H2RG, not only validates the proposed methods but also points out subtle behaviors inherent to each detector.

astro-ph.IM↗

arXiv2023

CAGIRE: a wide-field NIR imager for the COLIBRI 1.3 meter robotic telescope

The use of high energy transients such as Gamma Ray Bursts (GRBs) as probes of the distant universe relies on the close collaboration between space and ground facilities. In this context, the Sino-French mission SVOM has been designed to combine a space and a ground segment and to make the most of their synergy. On the ground, the 1.3 meter robotic telescope COLIBRI, jointly developed by France and Mexico, will quickly point the sources detected by the space hard X-ray imager ECLAIRs, in order to detect and localise their visible/NIR counterpart and alert large telescopes in minutes. COLIBRI is equipped with two visible cameras, called DDRAGO-blue and DDRAGO-red, and an infrared camera, called CAGIRE, designed for the study of high redshift GRBs candidates. Being a low-noise NIR camera mounted at the focus of an alt-azimutal robotic telescope imposes specific requirements on CAGIRE. We describe here the main characteristics of the camera: its optical, mechanical and electronics architecture, the ALFA detector, and the operation of the camera on the telescope. The instrument description is completed by three sections presenting the calibration strategy, an image simulator incorporating known detector effects, and the automatic reduction software for the ramps acquired by the detector. This paper aims at providing an overview of the instrument before its installation on the telescope.

astro-ph.IM↗

arXiv2022

Flux reconstruction for the NIR camera CAGIRE at the focus of the Colibrí telescope

CAGIRE is the near infrared camera of the Colibrí robotic telescope, designed for the follow-up of SVOM alerts. It is based on the ALFA 2k x 2k detector, from the LYNRED French Company, operating in "Up the Ramp" mode. An observation consists in a series of short (1-2 minutes) exposures during which the pixels are read out every 1.3 second, while continuously accumulating charges proportionally to the received flux. We discuss here the preprocessing of CAGIRE data and a method that can be used to recover the flux received by each pixel from the slope of the ramp.

astro-ph.IM↗

arXiv2012

Impacts of The Radiation Environment At L2 On Bolometers Onboard The Herschel Space Observatory

We present the effects of cosmic rays on the detectors onboard the Herschel satellite. We describe in particular the glitches observed on the two types of cryogenic far- infrared bolometer inside the two instruments PACS and SPIRE. The glitch rates are also reported since the launch together with the SREM radiation monitors aboard Herschel and Planck spacecrafts. Both have been injected around the Lagrangian point L2 on May 2009. This allows probing the radiation environment around this orbit. The impacts on the observation are finally summarized.

astro-ph.IM↗

arXiv2006

The Herschel/PACS 2560 bolometers imaging camera

The development program of the flight model imaging camera for the PACS instrument on-board the Herschel spacecraft is nearing completion. This camera has two channels covering the 60 to 210 microns wavelength range. The focal plane of the short wavelength channel is made of a mosaic of 2x4 3-sides buttable bolometer arrays (16x16 pixels each) for a total of 2048 pixels, while the long wavelength channel has a mosaic of 2 of the same bolometer arrays for a total of 512 pixels. The 10 arrays have been fabricated, individually tested and integrated in the photometer. They represent the first filled arrays of fully collectively built bolometers with a cold multiplexed readout, allowing for a properly sampled coverage of the full instrument field of view. The camera has been fully characterized and the ground calibration campaign will take place after its delivery to the PACS consortium in mid 2006. The bolometers, working at a temperature of 300 mK, have a NEP close to the BLIP limit and an optical bandwidth of 4 to 5 Hz that will permit the mapping of large sky areas. This paper briefly presents the concept and technology of the detectors as well as the cryocooler and the warm electronics. Then we focus on the performances of the integrated focal planes (responsivity, NEP, low frequency noise, bandwidth).

astro-ph↗