arXiv subjects

Oswin Aichholzer

Publications and source records attributed to Oswin Aichholzer.

At least 55 records · Page 3Linked to original sources

arXiv2020

A superlinear lower bound on the number of 5-holes

Let $P$ be a finite set of points in the plane in general position, that is, no three points of $P$ are on a common line. We say that a set $H$ of five points from $P$ is a $5$-hole in $P$ if $H$ is the vertex set of a convex $5$-gon containing no other points of $P$. For a positive integer $n$, let $h_5(n)$ be the minimum number of 5-holes among all sets of $n$ points in the plane in general position. Despite many efforts in the last 30 years, the best known asymptotic lower and upper bounds for $h_5(n)$ have been of order $Ω(n)$ and $O(n^2)$, respectively. We show that $h_5(n) = Ω(n\log^{4/5}{n})$, obtaining the first superlinear lower bound on $h_5(n)$. The following structural result, which might be of independent interest, is a crucial step in the proof of this lower bound. If a finite set $P$ of points in the plane in general position is partitioned by a line $\ell$ into two subsets, each of size at least 5 and not in convex position, then $\ell$ intersects the convex hull of some 5-hole in $P$. The proof of this result is computer-assisted.

math.CO↗

arXiv2019

On the edge-vertex ratio of maximal thrackles

A drawing of a graph in the plane is a thrackle if every pair of edges intersects exactly once, either at a common vertex or at a proper crossing. Conway's conjecture states that a thrackle has at most as many edges as vertices. In this paper, we investigate the edge-vertex ratio of maximal thrackles, that is, thrackles in which no edge between already existing vertices can be inserted such that the resulting drawing remains a thrackle. For maximal geometric and topological thrackles, we show that the edge-vertex ratio can be arbitrarily small. When forbidding isolated vertices, the edge-vertex ratio of maximal geometric thrackles can be arbitrarily close to the natural lower bound of 1/2. For maximal topological thrackles without isolated vertices, we present an infinite family with an edge-vertex ratio of 5/6.

cs.DM↗

arXiv2019

On the 2-colored crossing number

Let $D$ be a straight-line drawing of a graph. The rectilinear 2-colored crossing number of $D$ is the minimum number of crossings between edges of the same color, taken over all possible 2-colorings of the edges of $D$. First, we show lower and upper bounds on the rectilinear 2-colored crossing number for the complete graph $K_n$. To obtain this result, we prove that asymptotic bounds can be derived from optimal and near-optimal instances with few vertices. We obtain such instances using a combination of heuristics and integer programming. Second, for any fixed drawing of $K_n$, we improve the bound on the ratio between its rectilinear 2-colored crossing number and its rectilinear crossing number.

cs.CG↗

arXiv2019

Transformed flips in triangulations and matchings

Plane perfect matchings of $2n$ points in convex position are in bijection with triangulations of convex polygons of size $n+2$. Edge flips are a classic operation to perform local changes both structures have in common. In this work, we use the explicit bijection from Aichholzer et al. (2018) to determine the effect of an edge flip on the one side of the bijection to the other side, that is, we show how the two different types of edge flips are related. Moreover, we give an algebraic interpretation of the flip graph of triangulations in terms of elements of the corresponding Temperley-Lieb algebra.

math.CO↗

arXiv2019

Packing Short Plane Spanning Graphs in Complete Geometric Graphs

Given a set of points in the plane, we want to establish a connection network between these points that consists of several disjoint layers. Motivated by sensor networks, we want that each layer is spanning and plane, and that no edge is very long (when compared to the minimum length needed to obtain a spanning graph). We consider two different approaches: first we show an almost optimal centralized approach to extract two graphs. Then we show a constant factor approximation for a distributed model in which each point can compute its adjacencies using only local information. In both cases the obtained layers are plane

cs.CG↗

arXiv2019

Flip distances between graph orientations

Flip graphs are a ubiquitous class of graphs, which encode relations induced on a set of combinatorial objects by elementary, local changes. Skeletons of associahedra, for instance, are the graphs induced by quadrilateral flips in triangulations of a convex polygon. For some definition of a flip graph, a natural computational problem to consider is the flip distance: Given two objects, what is the minimum number of flips needed to transform one into the other? We consider flip graphs on orientations of simple graphs, where flips consist of reversing the direction of some edges. More precisely, we consider so-called $α$-orientations of a graph $G$, in which every vertex $v$ has a specified outdegree $α(v)$, and a flip consists of reversing all edges of a directed cycle. We prove that deciding whether the flip distance between two $α$-orientations of a planar graph $G$ is at most two is \NP-complete. This also holds in the special case of perfect matchings, where flips involve alternating cycles. This problem amounts to finding geodesics on the common base polytope of two partition matroids, or, alternatively, on an alcoved polytope. It therefore provides an interesting example of a flip distance question that is computationally intractable despite having a natural interpretation as a geodesic on a nicely structured combinatorial polytope. We also consider the dual question of the flip distance betwe en graph orientations in which every cycle has a specified number of forward edges, and a flip is the reversal of all edges in a minimal directed cut. In general, the problem remains hard. However, if we restrict to flips that only change sinks into sources, or vice-versa, then the problem can be solved in polynomial time. Here we exploit the fact that the flip graph is the cover graph of a distributive lattice. This generalizes a recent result from Zhang, Qian, and Zhang.

math.CO↗

arXiv2018

Bishellable drawings of $K_n$

The Harary--Hill conjecture, still open after more than 50 years, asserts that the crossing number of the complete graph $K_n$ is $ H(n) = \frac 1 4 \left\lfloor\frac{\mathstrut n}{\mathstrut 2}\right\rfloor \left\lfloor\frac{\mathstrut n-1}{\mathstrut 2}\right\rfloor \left\lfloor\frac{\mathstrut n-2}{\mathstrut 2}\right\rfloor \left\lfloor\frac{\mathstrut n-3}{\mathstrut 2}\right \rfloor$. Ábrego et al. introduced the notion of shellability of a drawing $D$ of $K_n$. They proved that if $D$ is $s$-shellable for some $s\geq\lfloor\frac{n}{2}\rfloor$, then $D$ has at least $H(n)$ crossings. This is the first combinatorial condition on a drawing that guarantees at least $H(n)$ crossings. In this work, we generalize the concept of $s$-shellability to bishellability, where the former implies the latter in the sense that every $s$-shellable drawing is, for any $b \leq s-2$, also $b$-bishellable. Our main result is that $(\lfloor \frac{n}{2} \rfloor\!-\!2)$-bishellability of a drawing $D$ of $K_n$ also guarantees, with a simpler proof than for $s$-shellability, that $D$ has at least $H(n)$ crossings. We exhibit a drawing of $K_{11}$ that has $H(11)$ crossings, is 3-bishellable, and is not $s$-shellable for any $s\geq5$. This shows that we have properly extended the class of drawings for which the Harary-Hill Conjecture is proved. Moreover, we provide an infinite family of drawings of $K_n$ that are $(\lfloor \frac{n}{2} \rfloor\!-\!2)$-bishellable, but not $s$-shellable for any $s\geq\lfloor\frac{n}{2}\rfloor$.

math.CO↗

arXiv2018

Perfect k-colored matchings and (k+2)-gonal tilings

We derive a simple bijection between geometric plane perfect matchings on $2n$ points in convex position and triangulations on $n+2$ points in convex position. We then extend this bijection to monochromatic plane perfect matchings on periodically $k$-colored vertices and $(k+2)$-gonal tilings of convex point sets. These structures are related to a generalization of Temperley-Lieb algebras and our bijections provide explicit one-to-one relations between matchings and tilings. Moreover, for a given element of one class, the corresponding element of the other class can be computed in linear time.

math.CO↗

arXiv2018

Balanced Islands in Two Colored Point Sets in the Plane

Let $S$ be a set of $n$ points in general position in the plane, $r$ of which are red and $b$ of which are blue. In this paper we prove that there exist: for every $α\in \left [ 0,\frac{1}{2} \right ]$, a convex set containing exactly $\lceil αr\rceil$ red points and exactly $\lceil αb \rceil$ blue points of $S$; a convex set containing exactly $\left \lceil \frac{r+1}{2}\right \rceil$ red points and exactly $\left \lceil \frac{b+1}{2}\right \rceil$ blue points of $S$. Furthermore, we present polynomial time algorithms to find these convex sets. In the first case we provide an $O(n^4)$ time algorithm and an $O(n^2\log n)$ time algorithm in the second case. Finally, if $\lceil αr\rceil+\lceil αb\rceil$ is small, that is, not much larger than $\frac{1}{3}n$, we improve the running time to $O(n \log n)$.

cs.CG↗

arXiv2018

Folding Polyominoes into (Poly)Cubes

We study the problem of folding a polyomino $P$ into a polycube $Q$, allowing faces of $Q$ to be covered multiple times. First, we define a variety of folding models according to whether the folds (a) must be along grid lines of $P$ or can divide squares in half (diagonally and/or orthogonally), (b) must be mountain or can be both mountain and valley, (c) can remain flat (forming an angle of $180^\circ$), and (d) must lie on just the polycube surface or can have interior faces as well. Second, we give all the inclusion relations among all models that fold on the grid lines of $P$. Third, we characterize all polyominoes that can fold into a unit cube, in some models. Fourth, we give a linear-time dynamic programming algorithm to fold a tree-shaped polyomino into a constant-size polycube, in some models. Finally, we consider the triangular version of the problem, characterizing which polyiamonds fold into a regular tetrahedron.

cs.CG↗

arXiv2017

Flip Distance Between Triangulations of a Simple Polygon is NP-Complete

Let T be a triangulation of a simple polygon. A flip in T is the operation of removing one diagonal of T and adding a different one such that the resulting graph is again a triangulation. The flip distance between two triangulations is the smallest number of flips required to transform one triangulation into the other. For the special case of convex polygons, the problem of determining the shortest flip distance between two triangulations is equivalent to determining the rotation distance between two binary trees, a central problem which is still open after over 25 years of intensive study. We show that computing the flip distance between two triangulations of a simple polygon is NP-complete. This complements a recent result that shows APX-hardness of determining the flip distance between two triangulations of a planar point set.

cs.CG↗

arXiv2017

Geodesic Order Types

The geodesic between two points $a$ and $b$ in the interior of a simple polygon~$P$ is the shortest polygonal path inside $P$ that connects $a$ to $b$. It is thus the natural generalization of straight line segments on unconstrained point sets to polygonal environments. In this paper we use this extension to generalize the concept of the order type of a set of points in the Euclidean plane to geodesic order types. In particular, we show that, for any set $S$ of points and an ordered subset $\mathcal{B} \subseteq S$ of at least four points, one can always construct a polygon $P$ such that the points of $\mathcal{B}$ define the geodesic hull of~$S$ w.r.t.~$P$, in the specified order. Moreover, we show that an abstract order type derived from the dual of the Pappus arrangement can be realized as a geodesic order type.

cs.CG↗

arXiv2017

Packing Plane Spanning Trees and Paths in Complete Geometric Graphs

We consider the following question: How many edge-disjoint plane spanning trees are contained in a complete geometric graph $GK_n$ on any set $S$ of $n$ points in general position in the plane? We show that this number is in $Ω(\sqrt{n})$. Further, we consider variants of this problem by bounding the diameter and the degree of the trees (in particular considering spanning paths).

cs.CG↗

arXiv2016

An Optimal Algorithm for Reconstructing Point Set Order Types from Radial Orderings

Let $P$ be a set of $n$ labeled points in the plane. The radial system of $P$ describes, for each $p\in P$, the order in which a ray that rotates around $p$ encounters the points in $P \setminus \{p\}$. This notion is related to the order type of $P$, which describes the orientation (clockwise or counterclockwise) of every ordered triple in $P$. Given only the order type, the radial system is uniquely determined and can easily be obtained. The converse, however, is not true. Indeed, let $R$ be the radial system of $P$, and let $T(R)$ be the set of all order types with radial system $R$ (we define $T(R) = \emptyset$ for the case that $R$ is not a valid radial system). Aichholzer et al. (Reconstructing Point Set Order Types from Radial Orderings, in ISAAC 2014) show that $T(R)$ may contain up to $n-1$ order types. They also provide polynomial-time algorithms to compute $T(R)$ when only $R$ is given. We describe a new algorithm for finding $T(R)$. The algorithm constructs the convex hulls of all possible point sets with the radial system $R$. After that, orientation queries on point triples can be answered in constant time. A representation of this set of convex hulls can be found in $O(n)$ queries to the radial system, using $O(n)$ additional processing time. This is optimal. Our results also generalize to abstract order types.

cs.CG↗

arXiv2015

Representing Directed Trees as Straight Skeletons

The straight skeleton of a polygon is the geometric graph obtained by tracing the vertices during a mitered offsetting process. It is known that the straight skeleton of a simple polygon is a tree, and one can naturally derive directions on the edges of the tree from the propagation of the shrinking process. In this paper, we ask the reverse question: Given a tree with directed edges, can it be the straight skeleton of a polygon? And if so, can we find a suitable simple polygon? We answer these questions for all directed trees where the order of edges around each node is fixed.

cs.CG↗

arXiv2015

Modem Illumination of Monotone Polygons

We study a generalization of the classical problem of the illumination of polygons. Instead of modeling a light source we model a wireless device whose radio signal can penetrate a given number $k$ of walls. We call these objects $k$-modems and study the minimum number of $k$-modems sufficient and sometimes necessary to illuminate monotone and monotone orthogonal polygons. We show that every monotone polygon with $n$ vertices can be illuminated with $\big\lceil \frac{n-2}{2k+3} \big\rceil$ $k$-modems. In addition, we exhibit examples of monotone polygons requiring at least $\lceil \frac {n-2} {2k+3}\rceil$ $k$-modems to be illuminated. For monotone orthogonal polygons with $n$ vertices we show that for $k=1$ and for even $k$, every such polygon can be illuminated with $\big\lceil \frac{n-2}{2k+4} \big\rceil$ $k$-modems, while for odd $k\geq3$, $\big\lceil \frac{n-2}{2k+6} \big\rceil$ $k$-modems are always sufficient. Further, by presenting according examples of monotone orthogonal polygons, we show that both bounds are tight.

cs.CG↗

arXiv2014

Flips in combinatorial pointed pseudo-triangulations with face degree at most four

In this paper we consider the flip operation for combinatorial pointed pseudo-triangulations where faces have size 3 or 4, so-called combinatorial 4-PPTs. We show that every combinatorial 4-PPT is stretchable to a geometric pseudo-triangulation, which in general is not the case if faces may have size larger than 4. Moreover, we prove that the flip graph of combinatorial 4-PPTs is connected and has diameter $O(n^2)$, even in the case of labeled vertices with fixed outer face. For this case we provide an $Ω(n\log n)$ lower bound.

math.CO↗

arXiv2014

On $k$-Gons and $k$-Holes in Point Sets

We consider a variation of the classical Erdős-Szekeres problems on the existence and number of convex $k$-gons and $k$-holes (empty $k$-gons) in a set of $n$ points in the plane. Allowing the $k$-gons to be non-convex, we show bounds and structural results on maximizing and minimizing their numbers. Most noteworthy, for any $k$ and sufficiently large $n$, we give a quadratic lower bound for the number of $k$-holes, and show that this number is maximized by sets in convex position.

cs.DM↗