SearcharxivSearch

arXiv subjects

P. Scott Carney

Publications and source records attributed to P. Scott Carney.

17 recordsLinked to original sources

Computational refocusing in phase-resolved confocal microscopy

We demonstrate numerical refocusing in coherent confocal laser scanning microscopy based on synthetic optical holography. This physics-based approach implements a computational propagation on the complex signal recovered in synthetic holography consistent with the wave physics and the parameters of the microscope. An experimental demonstration is shown to restore an in-focus image of a test object from data acquired at several focal plane off-sets. Numerical refocusing can provide focused views on samples with large height variation with a potential application in confocal optical surface profiling.

physics.optics

Clausius-Mossotti Relation Revisited: Media with Electric and Magnetic Response

A reexamination of the Clausius-Mossotti relation in which material with both electric and magnetic responses yields surprising results. Materials with indices near zero and with real parts less than zero, that is the real part of both the permeability and permittivity are negative, are found to emerge from the interaction of electric and magnetic responses in a self-consistent theory. The new results point the way to artificial and natural materials with exotic responses. A simulation with 10^10 particles shows good agreement with the analytical results.

physics.optics

Metal-Dielectric-Enhanced Upconversion: Going "Meso"

A novel concept of a \textit{mesocavity}, based on a simple yet counter-intuitive idea of covering metal nanoparticles with unusually thick ($\gtrsim 100$ nm) high-index dielectric shells, is demonstrated in technologically relevant and largely sought-after case of an upconversion (UC) enhancement. For readily available combinations of materials and geometrical parameters of metal-dielectric core-shell mesocavity, record high values of UC enhancement of $\gtrsim 10^6$ can be achieved on the cavity surface. For emitter inside the high-index dielectric shell with refractive index $n=2.7$, the Lorentz local-field correction can provide an additional enhancement factor for UC of $\approx 92$, resulting in UC enhancement of $\gtrsim 10^8$, which is three orders of magnitude larger than it has ever been reported for individual particles. Our mesocavity concept facilitates a beneficial synergy of plasmonic and whispering gallery-mode resonance functionalities within an intermediary region between nanoscale ($\lesssim 100$ nm) and microscale ($\gtrsim 1$ $μ$m).

physics.optics

Clustering Diffused-Particle Method for Scattering from Large Ensembles of Electromagnetically Polarizable Particles

The Foldy-Lax equation is generalized for a medium which consists of particles with both electric and magnetic responses. The result is used to compute fields scattered from ensembles of particles. The computational complexity is reduced by hierarchical clustering techniques to enable simulations with on the order of 10^10 particles. With so many particles we are able to see the transition to bulk media behavior of the fields. For non-magnetic materials, the observable index, permittivity, and permeability of the effective bulk medium are in good agreement with the Clausius-Mossotti relation. The fields simulated for particles with both electric and magnetic responses are in good agreement with new analytical results for a generalized effective medium theory.

physics.optics

Extraordinary fluorescence enhancement in metal-dielectric core-shell nanoparticles

Contrary to a paradigm of metal-enhanced fluorescence, unusually thick dielectric coatings can be very favorable to achieve extreme values of averaged fluorescence enhancement factor $\bar F\gtrsim 3000$ for emitters located on the surface, or in the interior, of the shell of Au@dielectric spherical core-shell particles under realistic conditions, even for the emitters with 100% intrinsic quantum yield. Thick dielectric coatings facilitate high-quality transverse electric (TE) multipole ($\ell=7$) resonances which are shown as the major cause for the reported extraordinary values of $\bar F$.

physics.optics

Remarkable Predictive Power of the Modified Long Wavelength Approximation

The modified long-wavelength approximation (MLWA), a next order approximation beyond the Rayleigh limit, has been applied usually only to the dipole $\ell=1$ contribution and for the range of size parameters $x$ not exceeding $x\lesssim 1$ to estimate far- and near-field electromagnetic properties of plasmonic nanoparticles. Provided that the MLWA functional form for the $T$-matrix in a given channel $\ell$ is limited to the ratio $T\sim iR/(F+D-iR)$, where $F$ is the familiar size-independent Fröhlich term and $R\sim {\cal O}(x^{2\ell+1})$ is a radiative reaction term, there is a one-parameter freedom in selecting the dynamic depolarization term $D\sim {\cal O}(x^2)$ which preserves the fundamental feature of the MLWA that its predictions coincide with those of the Mie theory up to the order ${\cal O}(x^2)$. By exploiting this untapped design freedom, we demonstrate on a number of different metals (Ag, Al, Au, Mg), and using real material data, that the MLWA may surprisingly yield very accurate results for plasmonic spheres both for (i) $x$ up to $\gtrsim 1$ and beyond, and (ii) higher order multipoles ($\ell>1$), essentially doubling its expected range of validity. Because the MLWA obviates the need of using spherical Bessel and Hankel functions and allows for an intuitive description of (nano)particle properties in terms of a driven damped harmonic oscillator parameters, a significantly improved analysis and understanding of nanoparticle scattering and near-field properties can be achieved.

physics.optics

Composition-Aware Spectroscopic Tomography

Chemical imaging provides information about the distribution of chemicals within a target. When combined with structural information about the target, in situ chemical imaging opens the door to applications ranging from tissue classification to industrial process monitoring. The combination of infrared spectroscopy and optical microscopy is a powerful tool for chemical imaging of thin targets. Unfortunately, extending this technique to targets with appreciable depth is prohibitively slow. We combine confocal microscopy and infrared spectroscopy to provide chemical imaging in three spatial dimensions. Interferometric measurements are acquired at a small number of focal depths, and images are formed by solving a regularized inverse scattering problem. A low-dimensional signal model is key to our approach: we assume the target comprises a finite number of distinct chemical species. We establish conditions on the constituent spectra and the number of measurements needed for unique recovery of the target. Simulations illustrate imaging of cellular phantoms and sub-wavelength targets from noisy measurements.

eess.IV

Rapid infrared spectroscopic nano-imaging with nano-FTIR holography

Scattering-type scanning near-field optical microscopy (s-SNOM), and its derivate, Fourier transform infrared nanospectroscopy (nano-FTIR) are emerging techniques for infrared (IR) nanoimaging and spectroscopy with applications in diverse fields ranging from nanophotonics, chemical imaging and materials science. However, spectroscopic nanoimaging is still challenged by the limited acquisition rate of current nano-FTIR technology. Here we combine s-SNOM, nano-FTIR and synthetic optical holographic (SOH) to achieve infrared spectroscopic nanoimaging at unprecedented speed (8 spectroscopically resolved images in 20 min), which we demonstrate with a polymer composite sample. Beyond being fast, our method promises to enable nanoimaging in the long IR spectral range, which is covered by IR supercontinuum and synchrotron sources, but not by current quantum cascade laser technology.

physics.optics

STRATIFY: a comprehensive and versatile MATLAB code for a multilayered sphere

We present a computer code for calculating near- and far-field electromagnetic properties of multilayered spheres. STRATIFY is one-of-a-kind open-source package which allows for the efficient calculation of electromagnetic near-field, energy density, total electromagnetic energy, radiative and non-radiative decay rates of a dipole emitter located in any (non-absorbing) shell (including a host medium), and fundamental cross-sections of a multilayered sphere, all within a single program. The developed software is typically more than 50 times faster than freely available packages based on boundary-element-method. Because of its speed and broad applicability, our package is a valuable tool for analysis of numerous light scattering problems, including, but not limited to fluorescence enhancement, upconversion, downconversion, second harmonic generation, surface enhanced Raman spectroscopy. The software is available for download from GitLab https://gitlab.com/iliarasskazov/stratify

physics.optics

An intriguing branching of the maximum position of the absorption cross section in Mie theory explained

A potential control over the position of maxima of scattering and absorption cross-sections can be exploited to better tailor nanoparticles for specific light-matter interaction applications. Here we explain in detail the mechanism of an appreciable blue shift of the absorption cross-section peak relative to a metal spherical particle localized surface plasmon resonance (LSPR) and remaining scattering and extinction cross sections. Such a branching of cross sections maxima requires a certain threshold value of size parameter x~0.7 and is a prerequisite for obtaining high fluorescence enhancements, because the spectral region of high radiative rate enhancement becomes separated from the spectral region of high non-radiative rate enhancement. A consequence is that the maximum of the absorption cross section cannot be used as the definition of the LSPR position for x>0.7.

physics.optics

The critical role of shell in enhanced fluorescence of metal-dielectric core-shell nanoparticles

Large scale simulations are performed by means of the transfer-matrix method to reveal optimal conditions for metal-dielectric core-shell particles to induce the largest fluorescence on their surfaces. With commonly used plasmonic cores (Au and Ag) and dielectric shells (SiO2, Al2O3, ZnO), optimal core and shell radii are determined to reach maximum fluorescence enhancement for each wavelength within 550~850 nm (Au core) and 390~500 nm (Ag core) bands, in both air and aqueous hosts. The peak value of the maximum achievable fluorescence enhancement factors of core-shell nanoparticles, taken over entire wavelength interval, increases with the shell refractive index and can reach values up to 9 and 70 for Au and Ag cores, within 600~700 nm and 400~450 nm wavelength ranges, respectively, which is much larger than that for corresponding homogeneous metal nanoparticles. Replacing air by an aqueous host has a dramatic effect of nearly halving the sizes of optimal core-shell configurations at the peak value of the maximum achievable fluorescence. In the case of Au cores,the fluorescence enhancements for wavelengths within the first near-infrared biological window (NIR-I) between 700 and 900 nm can be improved twofold compared to homogeneous Au particle when the shell refractive index ns > 2. As a rule of thumb, the wavelength region of optimal fluorescence (maximal nonradiative decay) turns out to be red-shifted (blue-shifted) by as much as 50 nm relative to the localized surface plasmon resonance wavelength of corresponding optimized core-shell particle. Our results provide important design rules and general guidelines for enabling versatile platforms for imaging, light source, and biological applications.

physics.optics

High-resolution label-free imaging of tissue morphology with confocal phase microscopy

Label-free imaging approaches seek to simplify and augment histopathologic assessment by replacing the current practice of staining by dyes to visualize tissue morphology with quantitative optical measurements. Quantitative phase imaging (QPI) operates with visible/UV light and thus provides a resolution matched to current practice. Here we introduce and demonstrate confocal QPI for label-free imaging of tissue sections and assess its utility for manual histopathologic inspection. Imaging cancerous and normal adjacent human breast and prostate, we show that tissue structural organization can be resolved with high spatial detail comparable to conventional H&E stains. Our confocal QPI images are found to be free of halo, solving this common problem in QPI. We further describe and apply a virtual imaging system based on Finite-Difference Time-Domain (FDTD) calculations to quantitatively compare confocal with wide-field QPI methods and explore performance limits using numerical tissue phantoms.

physics.med-ph

Electromagnetic energy in multilayered spherical particles

We obtain exact analytic expressions for (i) the electromagnetic energy radial density within and outside a multilayered sphere and (ii) the total electromagnetic energy stored within its core and each of its shells. Explicit expressions for the special cases of lossless core and shell are also provided. The general solution is based on compact recursive transfer-matrix method and its validity includes also magnetic media. The theory is illustrated on the examples of electric field enhancement within various metallo-dielectric silica-gold multilayered spheres. User-friendly MATLAB code which includes the theoretical treatment, is available as a supplement to the paper.

physics.optics

Transient vibration imaging with time-resolved synthetic holographic confocal microscopy

We introduce a new modality for dynamic phase imaging in confocal microscopy based on synthetic optical holography. By temporal demultiplexing of the detector signal into a series of holograms, we record time-resolved phase images directly in the time domain at a bandwidth as determined by the photo detector and digitizer. We demonstrate our method by optical imaging of transient vibrations in an atomic force microscope cantilever with 100 ns time resolution, and observe the dynamic deformation of the cantilever surface after excitation with broadband mechanical pulses. Temporal Fourier transform of a single data set acquired in 4.2 minutes yields frequency and mode profile of all excited out-of-plane vibration modes with sub-picometer vertical sensitivity and sub-micrometer lateral resolution. Our method has the potential for transient and spectroscopic vibration imaging of micromechanical systems at nano- and picosecond scale time resolution.

physics.optics

Optimization of Anisotropic Photonic Density of States for Raman Cooling

Optical refrigeration of solids holds tremendous promise for applications in thermal management. It can be achieved through multiple mechanisms including inelastic anti-Stokes Brillouin and Raman scattering. However, engineering of these mechanisms remains relatively unexplored. The major challenge lies in the natural unfavorable imbalance in transition rates for Stokes and anti-Stokes scattering. We consider the influence of anisotropic photonic density of states on Raman scattering and derive expressions for cooling in such systems. We demonstrate optimization of the Raman cooling figure of merit considering all possible orientations for the material crystal and two example photonic crystals. We find that the anisotropic description of the photonic DoS and the optimization process is necessary to obtain the best Raman cooling efficiency for systems having lower symmetry. This general result applies to a wide array of other laser cooling methods in the presence of anisotropy.

physics.optics

Parity-Time Symmetry in Coherently Coupled Vertical Cavity Laser Arrays

We report parity-time (PT) symmetry breaking in electrically injected, coherently coupled, vertical cavity surface emitting laser arrays. We predict beam steering, mode evolution and mode hopping as a consequence of the non-Hermiticity of the array analyzed by temporal coupled mode theory with both asymmetric gain distribution and local frequency detuning. We present experimental confirmation of the predicted mode evolution, mode hopping and PT symmetry breaking with quantitative agreement with the theory.

physics.optics

Competition between extinction and enhancement in surface enhanced Raman spectroscopy

Conjugated metallic nanoparticles are a promising means to achieve ultrasensitive and multiplexed sensing in intact three-dimensional samples, especially for biological applications, via surface enhanced Raman scattering (SERS). We show that enhancement and extinction are linked and compete in a collection of metallic nanoparticles. Counterintuitively, the Raman signal vanishes when nanoparticles are excited at their plasmon resonance, while increasing nanoparticle concentrations at off-resonance excitation sometimes leads to decreased signal. We develop an effective medium theory that explains both phenomena. Optimal choices of excitation wavelength, individual particle enhancement factor and concentrations are indicated.

physics.optics