arXiv subjects

Paolo Olivero

Publications and source records attributed to Paolo Olivero.

18 recordsLinked to original sources

arXiv2026

Oxygen in diamond: thermal stability of ST1 spin centres and creation of oxygen-pair complexes

Little is known about oxygen-related defects in diamond. Recently, the promising room-temperature spin centre named ST1 was identified as an oxygen centre, but of still unknown atomic structure and thermal stability. In this work, we report on the optically active oxygen-related centres and the conditions for their formation, using ion implantation of oxygen in various conditions of depth and fluence. More specifically, we establish the temperature formation/stability range of the ST1 centre, which has a maximum at about 1100°C and is narrower than for NV centres. In these conditions, optically detected magnetic resonance (ODMR) on small ST1 ensembles was measured with a spin readout contrast of > 20% at 300K. In cathodoluminescence, the 535 nm ST1 peak is not observed. Besides, a broad peak centred at 460 nm is measured for implantation of O$_2$ molecular ions. For an annealing temperature of 1500°C, a different centre is formed (with ZPL at 584.5 nm) with an intensity increasing with a power law 1.5 < p < 1.9 dependence from the implantation fluence. This suggests that this centre contains two oxygen atoms. Besides, a new spectral feature associated to an intrinsic defect was also observed, with four prominent lines (especially at 594nm). Finally, the thermal formation and stability of oxygen centres in diamond presented here are important for the identification of the atomic structure of defects such as the ST1 and possible O$_2$V$_x$ complex by means of ab initio calculations. Indeed, the formation energies and charge states of defect centres are easier to compute than the full energy level scheme, which to date still remains unsuccessful regarding the ST1 centre.

cond-mat.mtrl-sci↗

arXiv2024

Creation, Control, and Modeling of NV Centers in Nanodiamonds

Sensing based on Nitrogen-Vacancy (NV) centers in nanodiamonds (NDs) offers significant potential across various applications. However, optimizing their quantum-optical properties remains challenging. This study focuses on enhancing and controlling the optical properties of NV centers in NDs through surface chemistry tuning and proton beam irradiation. Systematic thermal oxidations were performed to investigate the evolution of surface chemical groups using IR spectroscopy and their influence on optical properties using photoluminescence spectroscopy and PL decay measurements. Proton irradiation was explored over a wide range of fluences (10^14 to 10^17 cm^-2) to precisely control the NV center concentration, identifying conditions that maximize creation and emission intensity. Furthermore, NV center charge state control was achieved by analyzing the NV-/NV0 ratio with varying surface terminations and NV center concentrations. A novel predictive mathematical model was developed to evaluate the efficiencies of forming NV- and NV0. Although tested specifically with proton-irradiated NDs, this model has broad applicability, representing a significant advancement in predicting the outcomes of ion-beam-based color center generation in diamond.

physics.atom-ph↗

arXiv2024

3D Printing in Microfluidics: Experimental Optimization of Droplet Size and Generation Time through Flow Focusing, Phase, and Geometry Variation

Droplet-based microfluidics systems have become widely used in recent years thanks to their advantages, varying from the possibility of handling small fluid volumes to directly synthesizing and encapsulating various living forms for biological-related applications. The effectiveness of such systems mainly depends on the ability to control some of these system's parameters, such as produced droplet size and formation time, which represents a challenging task. This work reports an experimental study on tuning droplet size and generation time in a flow-focusing geometry fabricated with stereolithography 3D printing by exploring the interplay of phase and geometrical parameters. We produced droplets at different low flow rates of continuous and dispersed phases to assess the effect of each of these phases on the droplets' size and formation time. We observed that smaller droplets were produced for high viscosity oil and water phase, along with high flow rates. In addition, changing the microfluidics channels' width, and morphology of the orifice has shown a similar effect on droplet size, as shown in the case of high-viscosity solutions. The variation of the bifurcation angle shows a noticeable variation in terms of the achieved droplet size and formation time. We further investigated the impact of modifying the width ratio of the continuous and dispersed phases on droplet formation

physics.flu-dyn↗

arXiv2023

A comprehensive study of the effect of thermally induced surface terminations on nanodiamonds electrical properties

Nanodiamonds (NDs) gained increasing attention in multiple research areas due to the possibility of tuning their physical and chemical features by functionalizing their surface. This has a crucial impact on their electrical properties, which are essential in applications such as the development of innovative sensors and in the biomedical field. The great interest in electrical conduction in NDs has driven the scientific community to its extensive investigation. The role of various functionalities has been considered and different conduction mechanisms have been proposed. In this work, we reported on a systematic study of the modification of the electrical properties of differently sized NDs, as a function of different thermal treatments in air, hydrogen or inert atmosphere. Samples were electrically characterized in controlled humidity conditions to consider the influence of water on conductivity. NDs electrical properties were interpreted in connection with their surface chemistry and structural features, probed with infrared and Raman spectroscopies. The presence of surface graphite, hydrogen terminations or water adsorbed on hydrophilic oxygen-containing functional groups rendered NDs more conductive. These moieties indeed enabled different conduction mechanisms, which were respectively graphite-mediated conduction, water-induced transfer doping and Grotthus mechanism in surface-adsorbed water. The effect of particles size on conductivity has also been evaluated and discussed. Our experimental findings shed light on the link between surface modifications and electrical properties of NDs, providing at the same time an interpretative key to understanding the effect of particles dimensions.

physics.chem-ph↗

arXiv2022

4H-SiC Schottky diode radiation hardness assessment by IBIC microscopy

We report findings on the Ion Beam Induced Charge (IBIC) characterization of a 4H-SiC Schottky barrier diode (SBD), in terms of the modification of the Charge Collection Efficiency (CCE) distribution induced by 20 MeV C ions irradiations with fluences ranging from 20 to 200 ions/um2. The lateral IBIC microscopy with 4 MeV protons over the SBD cross section, carried out on the pristine diode evidenced the widening of the depletion layer extension as function of the applied bias and allowed the measurement of the minority carrier diffusion lengths. After the irradiation with C ions, lateral IBIC showed a significant modification of the CCE distribution, with a progressive shrinkage of the depletion layer as the fluence of the damaging C ions increases. A simple electrostatic model ruled out that the shrinkage is due to the implanted charge and ascribed the perturbation of the electrostatic landscape to radiation-induced defects with positive charge state.

cond-mat.mtrl-sci↗

arXiv2022

Magnesium-vacancy optical centers in diamond

We provide the first systematic characterization of the structural and photoluminescence properties of optically active defect centers fabricated upon implantation of 30-100 keV Mg+ ions in artificial diamond. The structural configurations of Mg-related defects were studied by the emission channeling technique for 27Mg implantations performed both at room-temperature and 800 °C, which allowed the identification of a major fraction of Mg atoms (~30-42%) in sites which are compatible with the split-vacancy structure of the MgV complex. A smaller fraction of Mg atoms (~13-17%) was found on substitutional sites. The photoluminescence emission was investigated both at the ensemble and individual defect level in a temperature range comprised between 5 K and 300 K, offering a detailed picture of the MgV-related emission properties and revealing the occurrence of previously unreported spectral features. The optical excitability of the MgV center was also studied as a function of the optical excitation wavelength enabling to identify the optimal conditions for photostable and intense emission. The results are discussed in the context of the preliminary experimental data and the theoretical models available in the literature, with appealing perspectives for the utilization of the tunable properties of the MgV center for quantum information processing applications.

cond-mat.mtrl-sci↗

arXiv2021

Spectral emission dependence of tin-vacancy centers in diamond from thermal processing and chemical functionalization

We report a systematic photoluminescence (PL) investigation of the spectral emission properties of individual optical defects fabricated in diamond upon ion implantation and annealing. Three spectral lines at 620 nm, 631 nm, and 647 nm are identified and attributed to the SnV center due to their occurrence in the PL spectra of the very same single-photon emitting defects. We show that the relative occurrence of the three spectral features can be modified by oxidizing the sample surface following thermal annealing. We finally report the relevant emission properties of each class of individual emitters, including the excited state emission lifetime and the emission intensity saturation parameters.

quant-ph↗

arXiv2021

Spectral features of Pb-related color centers in diamond

We report on the systematic characterization of the optical properties of diamond color centers based on Pb impurities. An ensemble photoluminescence analysis of their spectral emission was performed at different excitation wavelengths in the 405-520 nm range and at different temperatures in the 4-300 K range. The series of observed spectral features consist of different emission lines associated with Pb-related defects. Finally, a room-temperature investigation of single-photon emitters under 490.5 nm laser excitation is reported, revealing different spectral signatures with respect to those already reported under 514 nm excitation. This work represents a substantial progress with respect to previous studies on Pb-related color centers, both in the attribution of an articulated series of spectral features and in the understanding of the formation process of this type of defect, thus clarifying the potential of this system for high-impact applications in quantum technologies.

quant-ph↗

arXiv2020

Biocompatible technique for nanoscale magnetic field sensing with Nitrogen-Vacancy centers

The possibility of using Nitrogen-vacancy centers in diamonds to measure nanoscale magnetic fields with unprecedented sensitivity is one of the most significant achievements of quantum sensing. Here we present an innovative experimental set-up, showing an achieved sensitivity comparable to the state of the art ODMR protocols if the sensing volume is taken into account. The apparatus allows magnetic sensing in biological samples such as individual cells, as it is characterized by a small sensing volume and full bio-compatibility. The sensitivity at different optical powers is studied to extend this technique to the intercellular scale.

physics.app-ph↗

arXiv2020

Quantum micro-nano devices fabricated in diamond by femtosecond laser and ion irradiation

Diamond has attracted great interest as a quantum technology platform thanks to its optically active nitrogen vacancy center (NV). The NV's ground state spin can be read out optically exhibiting long spin coherence times of about 1 ms even at ambient temperatures. In addition, the energy levels of the NV are sensitive to external fields. These properties make NVs attractive as a scalable platform for efficient nanoscale resolution sensing based on electron spins and for quantum information systems. Diamond photonics enhances optical interaction with NVs, beneficial for both quantum sensing and information. Diamond is also compelling for microfluidic applications due to its outstanding biocompatibility, with sensing functionality provided by NVs. However, it remains a significant challenge to fabricate photonics, NVs and microfluidics in diamond. In this Report, an overview is provided of ion irradiation and femtosecond laser writing, two promising fabrication methods for diamond based quantum technological devices. The unique capabilities of both techniques are described, and the most important fabrication results of color center, optical waveguide and microfluidics in diamond are reported, with an emphasis on integrated devices aiming towards high performance quantum sensors and quantum information systems of tomorrow

physics.optics↗

arXiv2016

Creation and characterization of He-related color centers in diamond

Diamond is a promising material for the development of emerging applications in quantum optics, quantum information and quantum sensing. The fabrication and characterization of novel luminescent defects with suitable opto-physical properties is therefore of primary importance for further advances in these research fields. In this work we report on the investigation in the formation of photoluminescent (PL) defects upon MeV He implantation in diamond. Such color centers, previously reported only in electroluminescence and cathodoluminescence regime, exhibited two sharp emission lines at 536.5 nm and 560.5 nm, without significant phonon sidebands. A strong correlation between the PL intensities of the above-mentioned emission lines and the He implantation fluence was found in the 10^15-10^17 cm^{-2} fluence range. The PL emission features were not detected in control samples, i.e. samples that were either unirradiated or irradiated with different ion species (H, C). Moreover, the PL emission lines disappeared in samples that were He-implanted above the graphitization threshold. Therefore, the PL features are attributed to optically active defects in the diamond matrix associated with He impurities. The intensity of the 536.5 nm and 560.5 nm emission lines was investigated as a function of the annealing temperature of the diamond substrate. The emission was observed upon annealing at temperatures higher than 500°C, at the expenses of the concurrently decreasing neutral-vacancy-related GR1 emission intensity. Therefore, our findings indicate that the luminescence originates from the formation of a stable lattice defect. Finally, the emission was investigated under different laser excitations wavelengths (i.e. 532 nm and 405 nm) with the purpose of gaining a preliminary insight about the position of the related levels in the energy gap of diamond.

quant-ph↗

arXiv2015

An analytical model for the mechanical deformation of locally graphitized diamond

We propose an analytical model to describe the mechanical deformation of single-crystal diamond following the local sub-superficial graphitization obtained by laser beams or MeV ion microbeam implantation. In this case, a local mass-density variation is generated at specific depths within the irradiated micrometric regions, which in turn leads to swelling effects and the development of corresponding mechanical stresses. Our model describes the constrained expansion of the locally damaged material and correctly predicts the surface deformation, as verified by comparing analytical results with experimental profilometry data and Finite Element simulations. The model can be adopted to easily evaluate the stress and strain fields in locally graphitized diamond in the design of microfabrication processes involving the use of focused ion/laser beams, for example to predict the potential formation of cracks, or to evaluate the influence of stress on the properties of opto mechanical devices.

cond-mat.mtrl-sci↗

arXiv2014

Realization of a diamond based high density multi electrode array by means of deep ion beam lithography

In the present work we report about a parallel-processing ion beam fabrication technique whereby high-density sub-superficial graphitic microstructures can be created in diamond. Ion beam implantation is an effective tool for the structural modification of diamond: in particular ion-damaged diamond can be converted into graphite, therefore obtaining an electrically conductive phase embedded in an optically transparent and highly insulating matrix. The proposed fabrication process consists in the combination of Deep Ion Beam Lithography (DIBL) and Focused Ion Beam (FIB) milling. FIB micromachining is employed to define micro-apertures in the contact masks consisting of thin (<10 um) deposited metal layers through which ions are implanted in the sample. A prototypical single-cell biosensor was realized with the above described technique. The biosensor has 16 independent electrodes converging inside a circular area of 20 um diameter (typical neuroendocrine cells size) for the simultaneous recording of amperometric signals.

physics.ins-det↗

arXiv2013

A new diamond biosensor with integrated graphitic microchannels for detecting quantal exocytic events from chromaffin cells

The quantal release of catecholamines from neuroendocrine cells is a key mechanism which has been investigated with a broad range of materials and devices, among which carbon-based materials such as carbon fibers, diamond-like carbon, carbon nanotubes and nanocrystalline diamond. In the present work we demonstrate that a MeV-ion-microbeam lithographic technique can be successfully employed for the fabrication of an all-carbon miniaturized cellular bio-sensor based on graphitic micro-channels embedded in a single-crystal diamond matrix. The device was functionally characterized for the in vitro recording of quantal exocytic events from single chromaffin cells, with high sensitivity and signal-to-noise ratio, opening promising perspectives for the realization of monolithic all-carbon cellular biosensors.

physics.bio-ph↗

arXiv2013

Direct measurement and modelling of internal strains in ion-implanted diamond

We present a phenomenological model and Finite Element simulations to describe the depth variation of mass density and strain of ion-implanted single-crystal diamond. Several experiments are employed to validate the approach: firstly, samples implanted with 180 keV B ions at relatively low fluences are characterized using high-resolution X-ray diffraction (HR-XRD); secondly, the mass density variation of a sample implanted with 500 keV He ions well above its amorphization threshold is characterized with Electron Energy Loss Spectroscopy (EELS). At high damage densities, the experimental depth profiles of strain and density display a saturation effect with increasing damage and a shift of the damage density peak towards greater depth values with respect to those predicted by TRIM simulations, which are well accounted for in the model presented here. The model is then further validated by comparing TEM-measured and simulated thickness values of a buried amorphous carbon layer formed at different depths by implantation of 500 keV He ions through a variable-thickness mask to simulate the simultaneous implantation of ions at different energies.

cond-mat.mtrl-sci↗

arXiv2012

Spectroscopic measurement of the refractive index of ion-implanted diamond

We present the results of variable-angle spectroscopic ellipsometry and transmittance measurements to determine the variation of the complex refractive index of ion implanted single-crystal diamond. An increase is found in both real and imaginary parts at increasing damage densities. The index depth variation is determined in the whole wavelength range between 250 and 1690 nm. The dependence from the vacancy density is evaluated, highlighting a deviation from linearity in the high-damage-density regime. A considerable increase (up to 5%) in the real part of the index is observed, attributed to an increase in polarizability, thus offering new microfabrication possibilities for waveguides and other photonic structures in diamond.

cond-mat.mtrl-sci↗

arXiv2006

Coherent Population Trapping of Single Spins in Diamond Under Optical Excitation

Coherent population trapping is demonstrated in single nitrogen-vacancy centers in diamond under optical excitation. For sufficient excitation power, the fluorescence intensity drops almost to the background level when the laser modulation frequency matches the 2.88 GHz splitting of the ground states. The results are well described theoretically by a four-level model, allowing the relative transition strengths to be determined for individual centers. The results show that all-optical control of single spins is possible in diamond.

quant-ph↗

arXiv2006

Coherent Population Trapping in Diamond N-V Centers at Zero Magnetic Field

Coherent population trapping at zero magnetic field was observed for nitrogen-vacancy centers in diamond under optical excitation. This was measured as a reduction in photoluminescence when the detuning between two excitation lasers matched the 2.88 GHz crystal-field splitting of the color center ground states. This behavior is highly sensitive to strain, which modifies the excited states, and was unexpected following recent experiments demonstrating optical readout of single nitrogen-vacancy electron spins based on cycling transitions. These results demonstrate for the first time that three-level Lambda configurations suitable for proposed quantum information applications can be realized simultaneously for all four orientations of nitrogen-vacancy centers at zero magnetic field.

cond-mat.mes-hall↗