Searcharxiv⌕ Search

arXiv subjects

Patrick Dondl

Publications and source records attributed to Patrick Dondl.

At least 37 records · Page 2Linked to original sources
arXiv2021

Approximation of Integral Fractional Laplacian and Fractional PDEs via sinc-Basis

Fueled by many applications in random processes, imaging science, geophysics, etc., fractional Laplacians have recently received significant attention. The key driving force behind the success of this operator is its ability to capture non-local effects while enforcing less smoothness on functions. In this paper, we introduce a spectral method to approximate this operator employing a sinc basis. Using our scheme, the evaluation of the operator and its application onto a vector has complexity of $\mathcal O(N\log(N))$ where $N$ is the number of unknowns. Thus, using iterative methods such as CG, we provide an efficient strategy to solve fractional partial differential equations with exterior Dirichlet conditions on arbitrary Lipschitz domains. Our implementation works in both $2d$ and $3d$. We also recover the FEM rates of convergence on benchmark problems. We further illustrate the efficiency of our approach by applying it to fractional Allen-Cahn and image denoising problems.

math.NA↗
arXiv2021

A proof of Taylor scaling for curvature-driven dislocation motion through random arrays of obstacles

We prove Taylor scaling for dislocation lines characterized by line-tension and moving by curvature under the action of an applied shear stress in a plane containing a random array of obstacles. Specifically, we show--in the sense of optimal scaling--that the critical applied shear stress for yielding, or percolation-like unbounded motion of the dislocation, scales in proportion to the square root of the obstacle density. For sufficiently small obstacle densities, Taylor scaling dominates the linear-scaling that results from purely energetic considerations and, therefore, characterizes the dominant rate-limiting mechanism in that regime.

math.AP↗
arXiv2021

Surface lattice Green's functions for high-entropy alloys

We study the surface elastic response of pure Ni, the random alloy FeNiCr and an average FeNiCr alloy in terms of the surface lattice Green's function. We propose a scheme for computing per-site Green's function and study their per-site variations. The average FeNiCr alloy accurately reproduces the mean Green's function of the full random alloy. Variation around this mean is largest near the edge of the surface Brillouin-zone and decays as $q^{-2}$ with wavevector $q$ towards the $Γ$-point. We also present expressions for the continuum surface Green's function of anisotropic solids of finite and infinite thickness and show that the atomistic Green's function approaches continuum near the $Γ$-point. Our results are a first step towards efficient contact calculations and Peierls-Nabarro type models for dislocations in high-entropy alloys.

cond-mat.mtrl-sci↗
arXiv2021

An Efficient Model for Scaffold-Mediated Bone Regeneration

We present a three dimensional, time dependent model for bone regeneration in the presence of porous scaffolds to bridge critical size bone defects. Our approach uses homogenized quantities, thus drastically reducing computational cost compared to models resolving the microstructural scale of the scaffold. Using abstract functional relationships instead of concrete effective material properties, our model can incorporate the homogenized material tensors for a large class of scaffold microstructure designs. We prove an existence and uniqueness theorem for solutions based on a fixed point argument. We include the cases of mixed boundary conditions and multiple, interacting signalling molecules, both being important for application. Furthermore we present numerical simulations showing good agreement with experimental findings.

math.AP↗
arXiv2021

Viscosity Solutions for Doubly-Nonlinear Evolution Equations

We extend the theory of viscosity solutions to treat scalar-valued doubly-nonlinear evolution equations. Such equations arise naturally in many mechanical models including a dry friction. After providing a suitable definition for discontinuous viscosity solutions in this setting, we show that Perron's construction is still available, i.e., we prove an existence result. Moreover, we will prove comparison principles and stability results for these problems. The theoretical considerations are accompanied by several examples, e.g., we prove the existence of a solution to a rate-independent level-set mean curvature flow. Finally, we discuss in detail a rate-independent ordinary differential equation stemming from a problem with non-convex energy. We show that the solution obtained by maximal minimizing movements and the solution obtained by the vanishing viscosity method coincide with the upper and lower Perron solutions and show the emergence of a rate-independent hysteresis loop.

math.AP↗
arXiv2020

Infinite pinning

In this work, we address the occurrence of infinite pinning in a random medium. We suppose that an initially flat interface starts to move through the medium due to some constant driving force. The medium is assumed to contain random obstacles. We model their positions by a Poisson point process and their strengths are not bounded. We determine a necessary condition on its distribution so that regardless of the driving force the interface gets pinned.

math.AP↗
arXiv2020

Connected Coulomb Columns: Analysis and Numerics

We consider a version of Gamow's liquid drop model with a short range attractive perimeter-penalizing potential and a long-range Coulomb interaction of a uniformly charged mass in $\R^3$. Here we constrain ourselves to minimizing among the class of shapes that are columnar, i.e., constant in one spatial direction. Using the standard perimeter in the energy would lead to non-existence for any prescribed cross-sectional area due to the infinite mass in the constant spatial direction. In order to heal this defect we use a connected perimeter instead. We prove existence of minimizers for this connected isoperimetric problem with long-range interaction and study the shapes of minimizers in the small and large cross section regimes. For an intermediate regime we use an Ohta-Kawasaki phase field model with connectedness constraint to study the shapes of minimizers numerically.

math.AP↗
arXiv2020

Pinning of interfaces in a random medium with zero mean

We consider a discrete and a continuum model for the propagation of a curvature sensitive interface in a time independent random medium. In both cases we suppose that the medium contains obstacles that act on the propagation of the interface with an inhibitory or an acceleratory force. We show that the interface remains bounded for all times even when a small constant external driving force is applied. This phenomenon has already been known when only inhibitory obstacles are present. In this work we extend this result to the case of, for example, a random medium of random zero mean forcing.

math.AP↗
arXiv2020

Bounds on Precipitate Hardening of Line and Surface Defects in Solids

The yield behavior of crystalline solids is determined by the motion of defects like dislocations, twin boundaries and coherent phase boundaries. These solids are hardened by introducing precipitates -- small particles of a second phase. It is generally observed that the motion of line defects like dislocations are strongly inhibited or pinned by precipitates while the motion of surface defects like twin and phase boundaries are minimally affected. In this article, we provide insight why line defects are more susceptible to the effect of precipitates than surface defects. Based on mathematical models that describe both types of motion, we show that for small concentrations of a nearly periodic arrangement of precipitates, the critical force that is required for a surface defect to overcome a precipitate is smaller than that required for a line defect. In particular, the critical forces for surface and line defects scale with the radius of precipitates to the second and first power, respectively.

math.AP↗
arXiv2019

Pinning of Interfaces by Localized Dry Friction

We consider a model for the evolution of an interface in a heterogeneous environment governed by a parabolic equation. The heterogeneity is introduced as obstacles exerting a localized dry friction. Our main result establishes the emergence of a rate-independent hysteresis for suitable randomly distributed obstacles, i.e., interfaces are pinned by the obstacles until a certain critical applied driving force is exceeded. The treatment of such a model in the context of pinning and depinning requires a comparison principle. We prove this property and hence the existence of viscosity solutions. Moreover, under reasonable assumptions, we show that viscosity solutions are equivalent to weak solutions.

math.AP↗
arXiv2018

Norm-Resolvent Convergence in Perforated Domains

For several different boundary conditions (Dirichlet, Neumann, Robin), we prove norm-resolvent convergence for the operator $-Δ$ in the perforated domain $Ω\setminus \bigcup_{ i\in 2\varepsilon\mathbb Z^d }B_{a_\varepsilon}(i),$ $a_\varepsilon\ll\varepsilon,$ to the limit operator $-Δ+μ_ι$ on $L^2(Ω)$, where $μ_ι\in\mathbb C$ is a constant depending on the choice of boundary conditions. This is an improvement of previous results [Cioranescu & Murat. A Strange Term Coming From Nowhere, Progress in Nonlinear Differential Equations and Their Applications, 31, (1997)], [S. Kaizu. The Robin Problems on Domains with Many Tiny Holes. Pro c. Japan Acad., 61, Ser. A (1985)], which show strong resolvent convergence. In particular, our result implies Hausdorff convergence of the spectrum of the resolvent for the perforated domain problem.

math.AP↗
arXiv2018

Optimizing Bone Scaffold Porosity Distributions

We consider a simple one-dimensional time-dependent model for bone regeneration in the presence of a bio-resorbable polymer scaffold. Within the framework of the model, we optimize the effective mechanical stiffness of the polymer scaffold together with the regenerated bone matrix. The result of the optimization procedure is a scaffold porosity distribution which maximizes the stiffness of the scaffold-bone system over the regeneration time, such that the propensity for mechanical failure is reduced.

q-bio.TO↗
arXiv2018

Simultaneous elastic shape optimization for a domain splitting in bone tissue engineering

This paper deals with the simulateneous optimization of a subset $\mathcal{O}_0$ of some domain $Ω$ and its complement $\mathcal{O}_1 = Ω\setminus \overline{\mathcal{O}}_0$ both considered as separate elastic objects subject to a set of loading scenarios. If one asks for a configuration which minimizes the maximal elastic cost functional both phases compete for space since elastic shapes usually get mechanically more stable when being enlarged. Such a problem arises in biomechanics where a bioresorbable polymer scaffold is implanted in place of lost bone tissue and in a regeneration phase new bone tissue grows in the scaffold complement via osteogenesis. In fact, the polymer scaffold should be mechanically stable to bear loading in the early stage regeneration phase and at the same time the new bone tissue grown in the complement of this scaffold should as well bear the loading. Here, this optimal subdomain splitting problem with appropriate elastic cost functionals is introduced and existence of optimal two phase configurations is established for a regularized formulation. Furthermore, based on a phase field approximation a finite element discretization is derived. Numerical experiments are presented for the design of optimal periodic scaffold microstructure.

math.NA↗
arXiv2018

Keeping it together: a phase field version of path-connectedness and its implementation

We describe the implementation of a topological constraint in finite element simulations of phase field models which ensures path-connectedness of preimages of intervals in the phase field variable. Two main applications of our method are presented. First, a discrete steepest decent of a phase field version of a bending energy with spontaneous curvature and additional surface area penalty is shown, which leads to disconnected surfaces without our topological constraint but connected surfaces with the constraint. The second application is the segmentation of an image into a connected component and its exterior. Numerically, our constraint is treated using a suitable geodesic distance function which is computed using Dijkstra's algorithm.

math.NA↗
arXiv2018

A gradient system with a wiggly energy and relaxed EDP-convergence

If gradient systems depend on a microstructure, we want to derive a macroscopic gradient structure describing the effective behavior of the microscopic effects. We introduce a notion of evolutionary Gamma-convergence that relates the microscopic energy and the microscopic dissipation potential with their macroscopic limits via Gamma-convergence. This new notion generalizes the concept of EDP-convergence, which was introduced in arXiv:1507.06322, and is called "relaxed EDP-convergence". Both notions are based on De Giorgi's energy-dissipation principle, however the special structure of the dissipation functional in terms of the primal and dual dissipation potential is, in general, not preserved under Gamma-convergence. By investigating the kinetic relation directly and using general forcings we still derive a unique macroscopic dissipation potential. The wiggly-energy model of James et al serves as a prototypical example where this nontrivial limit passage can be fully analyzed.

math.AP↗
arXiv2017

Uniform Regularity and Convergence of Phase-Fields for Willmore's Energy

We investigate the convergence of phase fields for the Willmore problem away from the support of a limiting measure $μ$. For this purpose, we introduce a suitable notion of essentially uniform convergence. This mode of convergence is a natural generalisation of uniform convergence that precisely describes the convergence of phase fields in three dimensions. More in detail, we show that, in three space dimensions, points close to which the phase fields stay bounded away from a pure phase lie either in the support of the limiting mass measure $μ$ or contribute a positive amount to the limiting Willmore energy. Thus there can only be finitely many such points. As an application, we investigate the Hausdorff limit of level sets of sequences of phase fields with bounded energy. We also obtain results on boundedness and $L^p$-convergence of phase fields and convergence from outside the interval between the wells of a double-well potential. For minimisers of suitable energy functionals, we deduce uniform convergence of the phase fields from essentially uniform convergence.

math.AP↗