SearcharxivSearch

arXiv subjects

Patrick Jenny

Publications and source records attributed to Patrick Jenny.

17 recordsLinked to original sources

Viscous spectral energy coupling across scales in generalised Newtonian fluids

We investigate the spectral energy dynamics of turbulent flows with variable viscosity using direct numerical simulation of homogeneous isotropic turbulence of generalised Newtonian fluids described by the Carreau constitutive model, covering both shear-thinning and shear-thickening regimes. The spectral evolution equations for the variable viscosity Navier-Stokes system show that the viscous term becomes nonlinear and gives rise to a convolution product in spectral space, formally analogous to that of the convective term. Unlike the constant viscosity case, where it acts as a purely local dissipation mechanism, the variable viscosity term carries both conservative (transfer) and non-conservative (dissipation) contributions entangled in the convolution product. We present novel computations of the viscous \mtm coupling $\hat{V}(\k, \kP)$, which does not satisfy a detailed conservation property analogous to that of the convective term. The viscous coupling maps reveal two distinct spectral regions: a sign-definite non-conservative region near $\kP \approx \bm{0}$, and a transfer-like dipole near $\kP \approx \k$ in shear-thickening fluids. The dipole satisfies the approximate antisymmetry $\hat{V}(\k, \kP) \approx -\hat{V}(\kP, \k)$, which is the defining signature of a conservative energy transfer. This demonstrates that energy transfer across scales, a role traditionally attributed exclusively to the convective nonlinearity, can arise from any nonlinear term in the momentum equation. The viscous energy transfer participates in the forward cascade alongside the convective transfer, eventually taking over the latter in the dissipation range. Its presence is connected to the emergence of power-law spectral decay replacing the classical exponential cutoff in shear-thickening fluids.

physics.flu-dyn

Weak and Higgs physics from the lattice

The manifestly gauge-invariant and non-perturbatively complete lattice formulation of the weak interactions and the Brout-Englert-Higgs effect is connected to the usual perturbative description in phenomenology via the Fr\"ohlich-Morchio-Strocchi mechanism. However, slight differences between the two have been observed, which can potentially be accounted for by augmenting perturbation theory. We report on our ongoing lattice investigations of these additional effects using a setup with two generations of leptons coupled vectorially to the gauge-Higgs system. We explore the spectrum, inner structure in terms of weak (quasi-)PDFs, and spectral functions of the system to eventually compare cross sections to experimental results.

hep-lat

The influence of energy-containing scales on the distribution of spectral energy transfers

We present computations of individual mode-to-mode energy transfers from direct numerical simulations of homogeneous isotropic turbulence. Unlike previous approaches based on shell-filtered velocity fields, this method distinguishes between the energy exchanged by each pair of modes within a triad. We introduce a potential function based on the energy content of the modes involved and show that it predicts the distribution of intense energy transfers in the vicinity of the sampling mode considered. By performing simulations with forcing applied at intermediate wavenumbers, we demonstrate that the region of most intense transfers is determined by the spectral location of the energy-containing scales rather than by the local or nonlocal character of the triad. Direct energy exchanges with the energy-containing range are suppressed by geometric constraints from the divergence-free condition, but persist as residuals when the sampling mode is close to the energy-containing scales. The comparison with an estimator derived from EDQNM theory shows good agreement and recovers the forward, scale-local nature of energy transfer consistent with the cascade picture.

physics.flu-dyn

Polydisperse collision kernels in droplet-laden turbulence with implications for rain formation

The collision kernel of droplets in warm clouds is a crucially important quantity for the parameterization of precipitation in weather and climate models. Nevertheless, its accurate representation remains a challenge, specifically in the bottleneck range $15\,\mu\text{m}<r<40\,\mu\text{m}$ within which turbulence is believed to substantially contribute to droplet growth. In this work, we address this problem by performing direct numerical simulations of polydisperse inertial particles suspended in three-dimensional turbulence at Reynolds number up to $Re_\lambda=418$. Collision statistics are compiled for droplet pairs across the Stokes number range $St\in[0.02,2]$, yielding comprehensive bidisperse maps of collision kernels, radial relative velocities, and radial distribution functions at contact. Our analysis reveals that polydispersity enhances collisions between light droplets through differential sampling, but attenuates collisions at larger Stokes numbers by rapidly reducing the spatial overlap of droplet clusters. By benchmarking existing models, we show that dominant bidisperse errors arise from overpredicted cross-species clustering. In light of these results, we propose an adapted model for the bidisperse radial distribution function, as well as a novel parameterization for the associated collision kernel, applicable to the smallest droplets in the bottleneck range with small settling velocities. Finally, we study the broadening of the droplet size distribution due to collision-coalescence and demonstrate that droplet growth is markedly accelerated in parcels of large local dissipation rate, supporting the hypothesis that turbulent intermittency may help overcome the bottleneck barrier.

physics.flu-dyn

Demonstration of a mechanical external biventricular assist device for resuscitative thoracotomy

Resuscitative thoracotomy, a high-risk procedure involving open heart massage, serves as a last resort for life-threatening conditions like penetrating chest wounds, severe blunt trauma, or surgery-related cardiac arrest. However, its success rate remains low, even with highly trained specialists. This research investigates the potential of an external biventricular assist device (BiVAD). By replacing open heart massage with our BiVAD device during resuscitative thoracotomy, we aim to achieve sufficient cardiac output, maintain physiological pressure levels, and potentially improve patient survival in these critical situations. The proposed BiVAD system features a simple 3D printed patch design for direct cardiac attachment, an actuation device, and a vacuum pump. The straightforward design allows quick application in emergency situations. The BiVAD system was tested in a hydraulic mock circulation, utilizing a silicone heart. Three actuation modes were tested for proof-of-concept: manual patch actuation, standard cardiac hand massage, and utilizing full capabilities of our BiVAD patch system with actuation device operation. Overall performance was assessed on ventricular pressure and flow rate data. Focusing on achieving the optimal cardiac output of 1.5 L/min (critical for patient survival), we tested our patch system against cardiac hand massage at a fixed rate of 60 bpm. Notably, our BiVAD system not only achieved to operate in the range of required cardiac output but also significantly reduced peak pressure in both ventricles compared to standard cardiac hand massage. This initial evaluation using a silicone heart model demonstrates the potential of our BiVAD system to achieve sufficient cardiac output while reducing peak pressure compared to cardiac hand massage. Further development holds promise for effective cardiac support in resuscitative thoracotomy.

physics.med-ph

Non-Linear Super-Stencils for Turbulence Model Corrections

Accurate simulation of turbulent flows remains a challenge due to the high computational cost of direct numerical simulations (DNS) and the limitations of traditional turbulence models. This paper explores a novel approach to augmenting standard models for Reynolds-Averaged Navier-Stokes (RANS) simulations using a Non-Linear Super-Stencil (NLSS). The proposed method introduces a fully connected neural network that learns a mapping from the local mean flow field to a corrective force term, which is added to a standard RANS solver in order to align its solution with high-fidelity data. A procedure is devised to extract training data from reference DNS and large eddy simulations (LES). To reduce the complexity of the non-linear mapping, the dimensionless local flow data is aligned with the local mean velocity, and the local support domain is scaled by the turbulent integral length scale. After being trained on a single periodic hill case, the NLSS-corrected RANS solver is shown to generalize to different periodic hill geometries and different Reynolds numbers, producing significantly more accurate solutions than the uncorrected RANS simulations.

physics.flu-dyn

Dissecting inertial clustering and sling dynamics in high-Reynolds number particle-laden turbulence

In this work, we aim to deepen the understanding of inertial clustering and the role of sling events in high-Reynolds number ($Re$) particle-laden turbulence. To this end, we perform one-way coupled particle tracking in flow fields obtained from direct numerical simulations (DNS) of forced homogeneous isotropic turbulence. Additionally, we examine the impact of filtering utilized in large eddy simulations (LES) by applying a sharp spectral filter to the DNS fields. Our analysis reveals that while instantaneous clustering through the centrifuge mechanism explains clustering at early times, the path history effect--the sampling of fluid flow along particle trajectories--becomes important later on. The filtered fields expose small-scale fractal clustering that cannot be predicted by the instantaneous flow field. We show that there exists a filter-effective Stokes number that governs the degree of fractal clustering and preferential sampling, revealing scale-similarity in the spatial distributions and fractal dimensions. Sling events are prevalent throughout our simulations and impose prominent patterns on the particle fields. In pursuit of investigating the sling dynamics, we compute the relative velocity, ensemble-averaged over proximal neighboring particles, to identify particles undergoing caustics. As postulated in recent theories, we find that in fully resolved, high-$Re$ turbulence, sling events occur in thin sheets of high strain, situated between turbulent vortices. This behavior is driven by rare, extreme events of compressive straining, manifested by fluctuations of the flow velocity gradients that propagate back and forth the positive branch of the Vieillefosse line.

physics.flu-dyn

Sparse data assimilation for under-resolved large-eddy simulations

The need for accurate and fast scale-resolving simulations of fluid flows, where turbulent dispersion is a crucial physical feature, is evident. Large-eddy simulations (LES) are computationally more affordable than direct numerical simulations, but their accuracy depends on sub-grid scale models and the quality of the computational mesh. In order to compensate related errors, a data assimilation approach for LES is devised in this work. The presented method is based on variational assimilation of sparse time-averaged velocity reference data. Working with the time-averaged LES momentum equation allows to employ a stationary discrete adjoint method. Therefore, a stationary corrective force in the unsteady LES momentum equation is iteratively updated within the gradient-based optimization framework in conjunction with the adjoint gradient. After data assimilation, corrected anisotropic Reynolds stresses are inferred from the stationary corrective force. Ultimately, this corrective force that acts on the mean velocity is replaced by a term that scales the velocity fluctuations through nudging of the corrected anisotropic Reynolds stresses. Efficacy of the proposed framework is demonstrated for turbulent flow over periodic hills and around a square cylinder. Coarse meshes are leveraged to further enhance the speed of the optimization procedure. Time- and spanwise-averaged velocity reference data from high-fidelity simulations is taken from the literature. Our results demonstrate that adjoint-based assimilation of averaged velocity enables the optimization of the mean flow, vortex shedding frequency (i.e., Strouhal number), and anisotropic Reynolds stresses. This highlights the superiority of scale-resolving simulations such as LES over simulations based on the (unsteady) Reynolds-averaged equations.

physics.flu-dyn

Spectral adjoint-based assimilation of sparse data in unsteady simulations of turbulent flows

The URANS equations provide a computationally efficient tool to simulate unsteady turbulent flows for a wide range of applications. To account for the errors introduced by the turbulence closure model, recent works have adopted data assimilation (DA) to enhance their predictive capabilities. Recognizing the challenges posed by the computational cost of 4DVar DA for unsteady flows, we propose a 3DVar DA framework that incorporates a time-discrete Fourier transform of the URANS equations, facilitating the use of the stationary discrete adjoint method in Fourier space. Central to our methodology is the introduction of a corrective, divergence-free, and unsteady forcing term, derived from a Fourier series expansion, into the URANS equations. This term aims at mitigating discrepancies in the modeled divergence of Reynolds stresses, allowing for the tuning of stationary parameters across different Fourier modes. Our implementation is built upon an extended version of the coupled URANS solver in OpenFOAM, enhanced to compute adjoint variables and gradients. This design choice ensures straightforward applicability to various flow setups and solvers, eliminating the need for specialized harmonic solvers. A gradient-based optimizer is employed to minimize discrepancies between simulated results and sparse velocity reference data. The effectiveness of our approach is demonstrated through its application to flow around a two-dimensional circular cylinder at a Reynolds number of 3900. Our results highlight the method's ability to reconstruct mean flow accurately and improve the vortex shedding frequency through the assimilation of zeroth mode data. Additionally, the assimilation of first mode data further enhances the simulation's capability to capture low-frequency dynamics of the flow, and finally, it runs efficiently by leveraging a coarse mesh.

physics.flu-dyn

Variational assimilation of sparse time-averaged data for efficient adjoint-based optimization of unsteady RANS simulations

Data assimilation (DA) plays a crucial role in extracting valuable information from flow measurements in fluid dynamics problems. Often only time-averaged data is available, which poses challenges for DA in the context of unsteady flow problems. Recent works have shown promising results in optimizing Reynolds-averaged Navier-Stokes (RANS) simulations of stationary flows using sparse data through variational data assimilation, enabling the reconstruction of mean flow profiles. In this study we perform three-dimensional variational data assimilation of sparse time-averaged data into an unsteady RANS (URANS) simulation by means of a stationary divergence-free forcing term in the URANS equations. Efficiency and speed of our method are enhanced by employing coarse URANS simulations and leveraging the stationary discrete adjoint method for the time-averaged URANS equations. The data assimilation codes were developed in-house using OpenFOAM for the URANS simulations as well as for the solution of the adjoint problem, and Python for the gradient-based optimization. Our results demonstrate that data assimilation of sparse time-averaged velocity measurements not only enables accurate mean flow reconstruction, but also improves the flow dynamics, specifically the vortex shedding frequency. To validate the efficacy of our approach, we applied it to turbulent flows around cylinders of various shapes at Reynolds numbers ranging from 3000 to 22000. Our findings indicate that data points near the cylinder play a crucial role in improving the vortex shedding frequency, while additional data points further downstream are necessary to also reconstruct the time-averaged velocity field in the wake region.

physics.flu-dyn

A variational data assimilation approach for sparse velocity reference data in coarse RANS simulations through a corrective forcing term

The Reynolds-averaged Navier-Stokes (RANS) equations provide a computationally efficient method for solving fluid flow problems in engineering applications. However, the use of closure models to represent turbulence effects can reduce their accuracy. To address this issue, recent research has explored data-driven techniques such as data assimilation and machine learning. An efficient variational data assimilation (DA) approach is presented to enhance steady-state eddy viscosity based RANS simulations. To account for model deficiencies, a corrective force term is introduced in the momentum equation. In the case of only velocity reference data, this term can be represented by a potential field and is divergence-free. The DA implementation relies on the discrete adjoint method and approximations for efficient gradient evaluation. The implementation is based on a two-dimensional coupled RANS solver in OpenFOAM, which is extended to allow the computation of the adjoint velocity and pressure as well as the adjoint gradient. A gradient-based optimizer is used to minimize the difference between the simulation results and the reference data. To evaluate this approach, it is compared with alternative data assimilation methods for canonical stationary two-dimensional turbulent flow problems. For the data assimilation, sparsely distributed reference data from averaged high-fidelity simulation results are used. The results suggest that the proposed method achieves the optimization goal more efficiently compared to applying data assimilation for obtaining the eddy viscosity, or a field modifying the eddy viscosity, directly. The method works well for different reference data configurations and runs efficiently by leveraging coarse meshes.

physics.flu-dyn

Vector boson scattering from the lattice

We study vector-boson scattering of the physical, gauge-invariant states in a reduced standard-model setup on the lattice for various parameter sets. To this end, the phase shift in the scalar channel is determined using a Lüscher-type analysis. The results can be readily interpreted in terms of the Higgs properties and a reunitarized Fröhlich-Morchio-Strocchi analysis at Born level. The only deviation appears for a Higgs mass below the elastic threshold, where we find a negative scattering length indicative of the bound-state nature of the physical scalar degree of freedom. We assess the possible implications for an experimental detection of the effect.

hep-lat

A unified stochastic particle method based on the Bhatnagar-Gross-Krook model for polyatomic gases and its combination with DSMC

Simulating hypersonic flow around a space vehicle is challenging because of the multiscale and nonequilibrium nature inherent in these flows. To effectively deal with such flows, a novel particle particle hybrid scheme combining the stochastic particle Bhatnagar-Gross-Krook (BGK) method with Direct Simulation Monte Carlo (DSMC) was developed recently, but only for monatomic gases [Fei et. al., J. Comput. Phys. 2021]. Here this work is extended to the particle-particle hybrid method for polyatomic gases. In the near continuum regime, employing the Ellipsoidal Statistical BGK model proposed by Y. Dauvois, et. al. [Eur. J. Mech. B Fluids, 2021] with discrete levels of vibrational energy, the stochastic particle BGK method is first established following the idea of the unified stochastic particle BGK (USPBGK) scheme. In the fluid limit, it has been proven to be of second order temporal and spatial accuracy. Then, the USPBGK scheme with rotational and vibrational energies is combined with DSMC to construct a hybrid method for polyatomic gases. The present hybrid scheme is validated with numerical tests of homogenous relaxation, 1D shock structure and 2D hypersonic flows past a wedge and a cylinder. Compared to traditional stochastic particle methods, the proposed hybrid method can achieve higher accuracy at a much lower computational cost. Therefore, it is a more efficient tool to study multiscale hypersonic flows.

physics.flu-dyn

Modeling multiple scattering transient of an ultrashort laser pulse by spherical particles

The multiple scattering of an ultrashort laser pulse by a turbid dispersive medium (namely a cloud of bubbles in water) is investigated by means of Monte Carlo simulations. The theory of Gouesbet and Gréhan [Part. Part. Syst. Charact. 17 213-224 (2000)] is used to derive an energetic model of the scattering transient. The spreading and extinction of the pulse is decoupled from the transient of scattering to describe each phenomenon individually. The transient of scattering is modeled with the Lorenz-Mie Theory, thus also valid for a relative refractive index lower than one, contrary to the Debye series expansion which does not converge close to the critical angle. To this aim, the Scattering Impulse Response Function (SIRF) allows to detect the different modes of scattering transient in time and direction. The present approach is more generic and can simulate clouds of air bubbles in water. Two Monte-Carlo approaches are proposed. The first is a pure Monte Carlo approach where the delay due to the scattering is randomly drawn at each event, while the second is based on the transport of the whole scattering signal. They are both embedded in the Monte Carlo code Scatter3D [JOSA A 24, 2206-2219 (2007)]. Both models produce equivalent trends and are validated against published numerical results. They are applied to the multiple scattering of ultra short pulse by a cloud of bubble in water in the forward direction. The pulse spread due to the propagation in water is computed for a wide range of traveled distances and pulse durations, and the optimal pulse duration is given to minimize the pulse spread at a given distance. The main result is that the scattered photons exit the turbid medium earlier than the ballistic photons and produce a double peak related to the refraction in the bubble. This demonstrates the possibility to develop new diagnostics to characterize dynamic bubbly flows.

physics.comp-ph

Modeling tissue perfusion in terms of 1d-3d embedded mixed-dimension coupled problems with distributed sources

We present a new method for modeling tissue perfusion on the capillary scale. The microvasculature is represented by a network of one-dimensional vessel segments embedded in the extra-vascular space. Vascular and extra-vascular space exchange fluid over the vessel walls. This exchange is modeled by distributed sources using smooth kernel functions for the extra-vascular domain. It is shown that the proposed method may significantly improve the approximation of the exchange flux, in comparison with existing methods for mixed-dimension embedded problems. Furthermore, the method exhibits better convergence rates of the relevant quantities due to the increased regularity of the extra-vascular pressure solution. Numerical experiments with a vascular network from the rat cortex show that the error in the approximation of the exchange flux for coarse grid resolution may be decreased by a factor of $3$. This may open the way for computing on larger network domains, where a fine grid resolution cannot be achieved in practical simulations due to constraints in computational resources, for example in the context of uncertainty quantification.

physics.comp-ph

The stochastic counterpart of conservation laws with heterogeneous conductivity fields: application to deterministic problems and uncertainty quantification

Conservation laws in the form of elliptic and parabolic partial differential equations (PDEs) are fundamental to the modeling of many problems such as heat transfer and flow in porous media. Many of such PDEs are stochastic due to the presence of uncertainty in the conductivity field. Based on the relation between stochastic diffusion processes and PDEs, Monte Carlo (MC) methods are available to solve these PDEs. These methods are especially relevant for cases where we are interested in the solution in a small subset of the domain. The existing MC methods based on the stochastic formulation require restrictively small time steps for high variance conductivity fields. Moreover, in many applications the conductivity is piecewise constant and the existing methods are not readily applicable in these cases. Here we provide an algorithm to solve one-dimensional elliptic problems that bypasses these two limitations. The methodology is demonstrated using problems governed by deterministic and stochastic PDEs. It is shown that the method provides an efficient alternative to compute the statistical moments of the solution to a stochastic PDE at any point in the domain. A variance reduction scheme is proposed for applying the method for efficient mean calculations.

physics.comp-ph

Temporal Markov Processes for Transport in Porous Media: Random Lattice Networks

Monte Carlo (MC) simulations of transport in random porous networks indicate that for high variances of the log-normal permeability distribution, the transport of a passive tracer is non-Fickian. Here we model this non-Fickian dispersion in random porous networks using discrete temporal Markov models. We show that such temporal models capture the spreading behavior accurately. This is true despite the fact that the slow velocities are strongly correlated in time, and some studies have suggested that the persistence of low velocities would render the temporal Markovian model inapplicable. Compared to previously proposed temporal stochastic differential equations with case specific drift and diffusion terms, the models presented here require fewer modeling assumptions. Moreover, we show that discrete temporal Markov models can be used to represent dispersion in unstructured networks, which are widely used to model porous media. A new method is proposed to extend the state space of temporal Markov models to improve the model predictions in the presence of extremely low velocities in particle trajectories and extend the applicability of the model to higher temporal resolutions. Finally, it is shown that by combining multiple transitions, temporal models are more efficient for computing particle evolution compared to correlated CTRW with spatial increments that are equal to the lengths of the links in the network.

physics.comp-ph