arXiv subjects

Patrick Le Fevre

Publications and source records attributed to Patrick Le Fevre.

13 recordsLinked to original sources

arXiv2025

Emergence of a Bandgap in Nano-Scale Graphite: A Computational and Experimental Study

Bandgaps in layered materials are critical for enabling functionalities such as tunable photodetection, efficient energy conversion, and nonlinear optical responses, which are essential for next-generation photonic and quantum devices. Gap engineering could form heterostructures with complementary materials like transition metal dichalcogenides or perovskites for multi-functional devices. Graphite, conventionally regarded as a gapless material, exhibits a bandgap of ~100 meV in nano-scale patterned highly oriented pyrolytic graphite (HOPG), as revealed by angle-resolved photoemission spectroscopy (ARPES) and Raman measurements. Our state-of-the-art calculations, incorporating photoemission matrix element effects, predict this bandgap with remarkable accuracy and attribute it to mechanical distortions introduced during patterning. This work bridges theory and experiment, providing the direct evidence of a tunable bandgap in HOPG. Beyond its fundamental significance, this finding opens new possibilities for designing materials with tailored electronic properties, enabling advancements in terahertz devices and optoelectronics.

cond-mat.mtrl-sci↗

arXiv2023

Weak Electronic Correlations Observed in Magnetic Weyl Semimetal Mn$_3$Ge

Using angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations, we systematically studied the electronic band structure of Mn$_3$Ge in the vicinity of the Fermi level. We observe several bands crossing the Fermi level, confirming the metallic nature of the studied system. We further observe several flat bands along various high symmetry directions, consistent with the DFT calculations. The calculated partial density of states (PDOS) suggests a dominant Mn $3d$ orbital contribution to the total valence band DOS. With the help of orbital-resolved band structure calculations, we qualitatively identify the orbital information of the experimentally obtained band dispersions. Out-of-plane electronic band dispersions are explored by measuring the ARPES data at various photon energies. Importantly, our study suggests relatively weaker electronic correlations in Mn$_3$Ge compared to Mn$_3$Sn.

cond-mat.mtrl-sci↗

arXiv2023

Electronic structure evolution of the magnetic Weyl semimetal Co$_3$Sn$_2$S$_2$ with hole and electron doping

Co$_3$Sn$_2$S$_2$ has been established as a prototype of magnetic Weyl semimetal, exhibiting a ''giant'' anomalous Hall effect in its ferromagnetic phase. An attractive feature of this material is that Weyl points lie close to Fermi level, so that one can expect a high reactivity of the topological properties to hole or electron doping. We present here a direct observation with Angle Resolved Photoemission Spectroscopy of the evolution of the electronic structure under different types of substitutions : In for Sn (hole doping outside the kagome Co plane), Fe for Co (hole doping inside the kagome Co plane) and Ni for Co (electron doping inside the kagome Co plane). We observe clear shifts of selected bands, which are due both to doping and to the reduction of the magnetic splitting by doping. We discriminate between the two by studying the temperature evolution from ferromagnetic to paramagnetic state. We discuss these shifts with the help of DFT calculations using the Virtual Crystal Approximation. We find that these calculations reproduce rather well the evolution with In, but largely fail to capture the effect of Fe and Ni, where local behavior at the impurity site plays an important role.

cond-mat.str-el↗

arXiv2023

Intrinsic defects and mid-gap states in quasi-one-dimensional Indium Telluride

Recently, intriguing physical properties have been unraveled in anisotropic semiconductors, in which the in-plane electronic band structure anisotropy often originates from the low crystallographic symmetry. The atomic chain is the ultimate limit in material downscaling for electronics, a frontier for establishing an entirely new field of one-dimensional quantum materials. Electronic and structural properties of chain-like InTe are essential for better understanding of device applications such as thermoelectrics. Here, we use scanning tunneling microscopy/spectroscopy (STM/STS) measurements and density functional theory (DFT) calculations to directly image the in-plane structural anisotropy in tetragonal Indium Telluride (InTe). As results, we report the direct observation of one-dimensional In1+ chains in InTe. We demonstrate that InTe exhibits a band gap of about 0.40 +-0.02 eV located at the M point of the Brillouin zone. Additionally, line defects are observed in our sample, were attributed to In1+ chain vacancy along the c-axis, a general feature in many other TlSe-like compounds. Our STS and DFT results prove that the presence of In1+ induces localized gap state, located near the valence band maximum (VBM). This acceptor state is responsible for the high intrinsic p-type doping of InTe that we also confirm using angle-resolved photoemission spectroscopy.

cond-mat.mtrl-sci↗

arXiv2023

Evolution of the spectral lineshape at the magnetic transition in Sr2IrO4 and Sr3Ir2O7

Sr2IrO4 and Sr3Ir2O7 form two families of spin-orbit Mott insulators with quite different charge gaps and an antiferromagnetic (AF) ground state. This offers a unique opportunity to study the impact of long-range magnetic order in Mott insulators. It appears to play a different role in the two families, as there is almost no change of the resistivity at the magnetic transition TN in Sr2IrO4 and a large one in Sr3Ir2O7. We use angle-resolved photoemission to study the evolution of the spectral lineshape through the magnetic transition. We use Ru and La substitutions to tune TN and discriminate changes due to temperature from those due to magnetic order. We evidence a shift and a transfer of spectral weight in the gap at TN in Sr3Ir2O7, which is absent in Sr2IrO4. We assign this behavior to a significantly larger coherent contribution to the spectral lineshape in Sr3Ir2O7, which evolves strongly at TN. On the contrary, the Sr2IrO4 lineshape is dominated by the incoherent part, which is insensitive to TN. We compare these findings to theoretical expections of the Slater vs Mott antiferromagnetism within Dynamical Mean Field Theory.

cond-mat.str-el↗

arXiv2019

Evidence of Direct Electronic Band Gap in two-dimensional van der Waals Indium Selenide crystals

Metal mono-chalcogenide compounds offer a large variety of electronic properties depending on chemical composition, number of layers and stacking-order. Among them, the InSe has attracted much attention due to the promise of outstanding electronic properties, attractive quantum physics, and high photo-response. Metal mono-chalcogenide compounds offer a large variety of electronic properties depending on chemical composition, number of layers and stacking-order. Among them, the InSe has attracted much attention due to the promise of outstanding electronic properties, attractive quantum physics, and high photo-response. Precise experimental determination of the electronic structure of InSe is sorely needed for better understanding of potential properties and device applications. Here, combining scanning tunneling spectroscopy (STS) and two-photon photoemission spectroscopy (2PPE), we demonstrate that InSe exhibits a direct band gap of about 1.25 eV located at the Gamma point of the Brillouin zone (BZ). STS measurements underline the presence of a finite and almost constant density of states (DOS) near the conduction band minimum (CBM) and a very sharp one near the maximum of the valence band (VMB). This particular DOS is generated by a poorly dispersive nature of the top valence band, as shown by angle resolved photoemission spectroscopy (ARPES) investigation. technologies. In fact, a hole effective mass of about m/m0 = -0.95 gammaK direction) was measured. Moreover, using ARPES measurements a spin-orbit splitting of the deeper-lying bands of about 0.35 eV was evidenced. These findings allow a deeper understanding of the InSe electronic properties underlying the potential of III-VI semiconductors for electronic and photonic

cond-mat.mes-hall↗

arXiv2018

Van der Waals epitaxy of two-dimensional single-layer h-BN on graphite by molecular beam epitaxy: Electronic properties and band structure

We report on the controlled growth of h-BN/graphite by means of molecular beam epitaxy (MBE). X-ray photoelectron spectroscopy (XPS) suggests an interface without any reaction or intermixing, while the angle resolved photoemission spectroscopy (ARPES) measurements show that the h-BN layers are epitaxially aligned with graphite. A well-defined band structure is revealed by ARPES measurement, reflecting the high quality of the h-BN films. The measured valence band maximum (VBM) located at 2.8 eV below the Fermi level reveals the presence of undoped h-BN films (band gap ~ 6 eV). These results demonstrate that, although only weak van der Waals interactions are present between h-BN and graphite, a long range ordering of h-BN can be obtained even on polycrystalline graphite via van der Waals epitaxy, offering the prospect of large area, single layer h-BN.

cond-mat.mtrl-sci↗

arXiv2018

Electronic band structure of Two-Dimensional WS2/Graphene van der Waals Heterostructures

Combining single-layer two-dimensional semiconducting transition metal dichalcogenides (TMDs) with graphene layer in van der Waals heterostructures offers an intriguing means of controlling the electronic properties through these heterostructures. Here, we report the electronic and structural properties of transferred single layer WS2 on epitaxial graphene using micro-Raman spectroscopy, angle-resolved photoemission spectroscopy measurements (ARPES) and Density Functional Theory (DFT) calculations. The results show good electronic properties as well as well-defined band arising from the strong splitting of the single layer WS2 valence band at K points, with a maximum splitting of 0.44 eV. By comparing our DFT results with local and hybrid functionals, we find the top valence band of the experimental heterostructure is close to the calculations for suspended single layer WS2. . Our results provide an important reference for future studies of electronic properties of WS2 and its applications in valleytronic devices.

cond-mat.mtrl-sci↗

arXiv2018

Tunable Doping in Hydrogenated Single Layered Molybdenum Disulfide

Structural defects in the molybdenum disulfide (MoS2) monolayer are widely known for strongly altering its properties. Therefore, a deep understanding of these structural defects and how they affect MoS2 electronic properties is of fundamental importance. Here, we report on the incorporation of atomic hydrogen in mono-layered MoS2 to tune its structural defects. We demonstrate that the electronic properties of single layer MoS2 can be tuned from the intrinsic electron (n) to hole (p) doping via controlled exposure to atomic hydrogen at room temperature. Moreover, this hydrogenation process represents a viable technique to completely saturate the sulfur vacancies present in the MoS2 flakes. The successful incorporation of hydrogen in MoS2 leads to the modification of the electronic properties as evidenced by high resolution X-ray photoemission spectroscopy and density functional theory calculations. Micro-Raman spectroscopy and angle resolved photoemission spectroscopy measurements show the high quality of the hydrogenated MoS2 confirming the efficiency of our hydrogenation process. These results demonstrate that the MoS2 hydrogenation could be a significant and efficient way to achieve tunable doping of transition metal dichalcogenides (TMD) materials with non-TMD elements.

cond-mat.mtrl-sci↗

arXiv2016

Influence of the surface symmetry breaking on the magnetism, collapsing and three dimensional dispersion of Co pnictides ACo2As2 (A=Ba, Sr, Ca)

We use angle-resolved photoemission to study the three dimensional (3D) electronic structure of Co pnictides ACo2As2 with A=Ba, Sr, Ca or a mixture of Sr and Ca. These compounds are isostructural to Fe based superconductors, but have one more electron in the Co $3d$ orbitals. Going from Ba to Ca, they become more and more 3D, eventually forming a 'collapsed' tetragonal phase, where the distance between CoAs layers is markedly reduced. The observed periodicity of the 3D electronic structure matches in each case that expected from the distance between the planes in the bulk. However, the electronic structure is better fitted by a calculation corresponding to a slab with 2 CoAs layers than to the bulk structure. We attribute this to subtle modifications of the 2D electronic structure induced by the truncation of the 3D dispersion at the surface in the ARPES measurement. We further study how this affects the electronic properties. We show that, despite this distortion, the electronic structure of CaCo2As2 is essentially that expected for a collapsed phase. Electronic correlations produce a renormalization of the electronic structure by a factor 1.4, which is not affected by the transition to the collapsed state. On the other hand, a small shift of the Fermi level reduces the density of states in the eg bands and suppresses the magnetic transition expected in CaCo2As2. Our study evidences that observing the bulk periodicity is not sufficient to ensure bulk sensitivity. It further gives direct information on the role of 3D interactions, mostly governed by Co-As hybridization, among eg and t2g orbitals. It is also useful to better understand the electronic structure of Fe superconductors and the range of validity of ARPES measurements.

cond-mat.str-el↗

arXiv2016

Orbital-dependent Fermi Surface shrinking as a fingerprint of nematicity in FeSe

The large anisotropy in the electronic properties across a structural transition in several correlated systems has been identified as the key manifestation of electronic nematic order, breaking rotational symmetry. In this context, FeSe is attracting tremendous interest, since electronic nematicity develops over a wide range of temperatures, allowing accurate experimental investigation. Here we combine angle-resolved photoemission spectroscopy and theoretical calculations based on a realistic multi-orbital model to unveil the microscopic mechanism responsible for the evolution of the electronic structure of FeSe across the nematic transition. We show that the self-energy corrections due to the exchange of spin fluctuations between hole and electron pockets are responsible for an orbital-dependent shrinking of the Fermi Surface that affects mainly the $xz/yz$ parts of the Fermi surface. This result is consistent with our experimental observation of the Fermi Surface in the high-temperature tetragonal phase, that includes the $xy$ electron sheet that was not clearly resolved before. In the low-temperature nematic phase, we experimentally confirm the appearance of a large ($\sim$ 50meV) $xz/yz$ splittings. It can be well reproduced in our model by assuming a moderate splitting between spin fluctuations along the $x$ and $y$ crystallographic directions. Our mechanism shows how the full entanglement between orbital and spin degrees of freedom can make a spin-driven nematic transition equivalent to an effective orbital order.

cond-mat.str-el↗

arXiv2016

ARPES view of orbitally resolved quasiparticle lifetimes in iron pnictides

We study with ARPES the renormalization and quasiparticle lifetimes of the $d_{xy}$ and $d_{xz}$/$d_{yz}$ orbitals in two iron pnictides, LiFeAs and Ba(Fe$_{0.92}$Co$_{0.08}$)$_2$As$_2$ (Co8). We find that both quantities depend on orbital character rather than on the position on the Fermi Surface (for example hole or electron pocket). In LiFeAs, the renormalizations are larger for $d_{xy}$, while they are similar on both types of orbitals in Co8. The most salient feature, which proved robust against all the ARPES caveats we could think of, is that the lifetimes for $d_{xy}$ exhibit a markedly different behavior than those for $d_{xz}$/$d_{yz}$. They have smaller values near $E_F$ and exhibit larger $ω$ and temperature dependences. While the behavior of $d_{xy}$ is compatible with a Fermi liquid description, it is not the case for $d_{xz}$/$d_{yz}$. This situation should have important consequences for the physics of iron pnictides, which have not been considered up to now. More generally, it raises interesting questions on how a Fermi liquid regime can be established in a multiband system with small effective bandwidths.

cond-mat.str-el↗

arXiv2015

Direct evidence for minority spin gap in the Co2MnSi Heusler alloy

Half Metal Magnets are of great interest in the field of spintronics because of their potential full spin-polarization at the Fermi level and low magnetization damping. The high Curie temperature and predicted 0.7eV minority spin gap make the Heusler alloy Co2MnSi very promising for applications.We investigated the half-metallic magnetic character of this alloy using spin-resolved photoemission, ab initio calculation and ferromagnetic resonance. At the surface of Co2MnSi, a gap in the minority spin channel is observed, leading to 100% spin polarization. However, this gap is 0.3 eV below the Fermi level and a minority spin state is observed at the Fermi level. We show that a minority spin gap at the Fermi energy can nevertheless be recovered either by changing the stoichiometry of the alloy or by covering the surface by Mn, MnSi or MgO. This results in extremely small damping coefficients reaching values as low as 7x 10-4.

cond-mat.mtrl-sci↗