arXiv subjects

Patrizio Graziosi

Publications and source records attributed to Patrizio Graziosi.

29 records · Page 2Linked to original sources

arXiv2019

Impact of the scattering physics on the power factor of complex thermoelectric materials

We assess the impact of the scattering physics assumptions on the thermoelectric properties of five Co-based p-type half-Heusler alloys by considering full energy-dependent scattering times, versus the commonly employed constant scattering time. For this, we employ DFT bandstructures and a full numerical scheme that uses Fermi's Golden Rule to extract the momentum relaxation times of each state at every energy, momentum, and band. We consider electron-phonon scattering (acoustic and optical), as well as ionized impurity scattering, and evaluate the qualitative and quantitative differences in the power factors of the materials compared to the case where the constant scattering time is employed. We show that the thermoelectric power factors extracted from the two different methods differ in terms of i) their ranking between materials, ii) the carrier density where the peak power factor appears, and iii) their trends with temperature. We further show that the constant relaxation time approximation smoothens out the richness in the bandstructure features, thus limiting the possibilities of exploring this richness for material design and optimization. These details are more properly captured under full energy/momentum-dependent scattering time considerations. Finally, by mapping the conductivities extracted within the two schemes, we provide appropriate density-dependent constant relaxation times that could be employed as a fast first order approximation for extracting charge transport properties in the half-Heuslers we consider.

cond-mat.mtrl-sci↗

arXiv2019

Transient quantum isolation and critical behavior in the magnetization dynamics of half-metallic manganites

We combine time resolved pump-probe Magneto-Optical Kerr Effect and Photoelectron Spectroscopy experiments supported by theoretical analysis to determine the relaxation dynamics of delocalized electrons in half-metallic ferromagnetic manganite $La_{1-x}Sr_{x}MnO_{3}$. We observe that the half-metallic character of $La_{1-x}Sr_{x}MnO_{3}$ determines the timescale of both the electronic phase transition and the quenching of magnetization, revealing a quantum isolation of the spin system in double exchange ferromagnets extending up to hundreds of picoseconds. We demonstrate the use of time-resolved hard X-ray photoelectron spectroscopy (TR-HAXPES) as a unique tool to single out the evolution of strongly correlated electronic states across a second-order phase transition in a complex material.

cond-mat.str-el↗

arXiv2019

Controlling magnetoresistance by oxygen impurities in Mq3-based molecular spin valves

The understanding of magnetoresistance (MR) in organic spin valves (OSVs) based on molecular semiconductors is still incomplete after its demonstration more than a decade ago. While carrier concentration may play an essential role in spin transport in these devices, direct experimental evidence of its importance is lacking. We probed the role of charge carrier concentration by studying the interplay between MR and multilevel resistive switching in OSVs. The present work demonstrates that all salient features of these devices, particularly the intimate correlation between MR and resistance, can be accounted for by the impurity band model, based on oxygen migration. Finally, we highlight the critical importance of carrier concentration in determining spin transport and MR in OSVs and the role of interface-mediated oxygen migration in controlling the OSVs response.

physics.app-ph↗

arXiv2018

11,11,12,12-tetracyanonaphtho-2,6-quinodimethane in Contact with Ferromagnetic Electrodes for Organic Spintronics

Spinterface engineering has shown quite important roles in organic spintronics as it can improve spin injection or extraction. In this study, 11,11,12,12-tetracyanonaptho-2,6-quinodimethane (TNAP) is introduced as an interfacial layer for a prototype interface of Fe/TNAP. We report an element-specific investigation of the electronic and magnetic structures of Fe/TNAP system by use of near edge X-Ray absorption fine structure (NEXAFS) and X-ray magnetic circular dichroism (XMCD). Strong hybridization between TNAP and Fe and induced magnetization of N atoms in TNAP molecule are observed. XMCD sum rule analysis demonstrates that the adsorption of TNAP reduces the spin moment of Fe by 12%. In addition, induced magnetization in N K-edge of TNAP has also been found with other commonly used ferromagnets in organic spintronics, such as La0.7Sr0.3MnO3 and permalloy, which makes TNAP a very promising molecule for spinterface engineering in organic spintronics.

cond-mat.mtrl-sci↗

arXiv2018

Simulation study of ballistic spin-MOSFET devices with ferromagnetic channels based on some Heusler and oxide compounds

Newly emerged materials from the family of Heuslers and complex oxides exhibit finite bandgaps and ferromagnetic behavior with Curie temperatures much higher than even room temperature. In this work, using the semiclassical top-of-the-barrier FET model, we explore the operation of a spin-MOSFET that utilizes such ferromagnetic semiconductors as channel materials, in addition to ferromagnetic source/drain contacts. Such a device could retain the spin polarization of injected electrons in the channel, the loss of which limits the operation of traditional spin transistors with non-ferromagnetic channels. We examine the operation of four material systems that are currently considered some of the most prominent known ferromagnetic semiconductors, three Heusler-type alloys (Mn2CoAl, CrVZrAl, CoVZrAl) and one from the oxide family (NiFe2O4). We describe their bandstructures by using data from DFT calculations. We investigate under which conditions high spin polarization and significant ION/IOFF ratio, two essential requirements for the spin-MOSFET operation, are both achieved. We show that these particular Heusler channels, in their bulk form, do not have adequate bandgap to provide high ION/IOFF ratios, and have small magnetoconductance compared to state-of-the-art devices. However, with confinement into ultra-narrow sizes down to a few nanometers, and by engineering their spin dependent contact resistances, they could prove promising channel materials for the realization of spin-MOSFET transistor devices that offer combined logic and memory functionalities. Although the main compounds of interest in this paper are Mn2CoAl, CrVZrAl, CoVZrAl, and NiFe2O4 alone, we expect that the insight we provide is relevant to other classes of such materials as well.

physics.app-ph↗

arXiv2016

Proposal for a spin MOSFET based on spin gapless semiconductors

We propose a spintronic metal oxide semiconductor field effect transistor (spin MOSFET) where a spin gapless semiconductor (SGS) constitutes the channel and the drain is a ferromagnetic metal. SGS exhibit a non-zero band gap in only one of the spin sub-bands and feature complete spin polarization at finite temperature. We present an analytical model of the device and comment the properties relevant for devices applications. Our results boost SGS as a new paradigm for the spin MOSFET concept.

cond-mat.mtrl-sci↗

arXiv2014

Hybrid Interface States and Spin Polarization at Ferromagnetic Metal-Organic Heterojunctions: Interface Engineering for Efficient Spin Injection in Organic Spintronics

Ferromagnetic metal-organic semiconductor (FM-OSC) hybrid interfaces have shown to play an important role for spin injection in organic spintronics. Here, 11,11,12,12-tetracyanonaptho-2,6-quinodimethane (TNAP) is introduced as an interfacial layer in Co-OSCs heterojunction with an aim to tune the spin injection. The Co/TNAP interface is investigated by use of X-ray and ultraviolet photoelectron spectroscopy (XPS/UPS), near edge X-ray absorption fine structure (NEXAFS) and X-ray magnetic circular dichroism (XMCD). Hybrid interface states (HIS) are observed at Co/TNAP interface resulting from chemical interaction between Co and TNAP. The energy level alignment at Co/TNAP/OSCs interface is also obtained, and a reduction of the hole injection barrier is demonstrated. XMCD results confirm sizeable spin polarization at the Co/TNAP hybrid interface.

cond-mat.mtrl-sci↗

arXiv2013

A novel picture for charge transport interpretation in epitaxial manganite thin films

Transport characterizations of epitaxial La0.7Sr0.3MnO3 thin films in the thickness range 5-40 nm and 25-410 K temperature interval have been accurately collected. We show that taking into account polaronic effects allows to achieve the best ever fitting of the transport curves in the whole temperature range. The Current Carriers Density Collapse picture accurately accounts for the properties variation across the metal-insulator-transition. The electron-phonon coupling parameter estimations are in a good agreement with theoretical predictions. The results promote a clear and straightforward quantitative description of the manganite films involved in charge transport device applications.

cond-mat.str-el↗

arXiv2012

Conditions for the growth of smooth La0.7Sr0.3MnO3 thin films by pulsed electron ablation

We report on the optimisation of the growth conditions of manganite La0.7Sr0.3MnO3 (LSMO) thin films prepared by Channel Spark Ablation (CSA). CSA belongs to pulsed electron deposition methods and its energetic and deposition parameters are quite similar to those of pulsed laser deposition. The method has been already proven to provide manganite films with good magnetic properties, but the films were generally relatively rough (a few nm coarseness). Here we show that increasing the oxygen deposition pressure with respect to previously used regimes, reduces the surface roughness down to unit cell size while maintaining a robust magnetism. We analyse in detail the effect of other deposition parameters, like accelerating voltage, discharging energy, and temperature and provide on this basis a set of optimal conditions for the growth of atomically flat films. The thicknesses for which atomically flat surface was achieved is as high as about 10-20 nm, corresponding to films with room temperature magnetism. We believe such magnetic layers represent appealing and suitable electrodes for various spintronic devices.

cond-mat.mtrl-sci↗

arXiv2012

Hanle effect missing in a prototypical organic spintronic device

We investigate spin precession (Hanle effect) in the prototypical organic spintronic giant magnetoresistance (GMR) device La0.7Sr0.3MnO3(LSMO)/tris(8-hydroxyquinoline)(Alq3)/AlOx/Co. The Hanle effect is not observed in measurements taken by sweeping a magnetic field at different angles from the plane of the device. As possible explanations we discuss the tilting out of plane of the magnetization of the electrodes, exceptionally high mobility or hot spots. Our results call for a greater understanding of spin injection and transport in such devices.

cond-mat.mtrl-sci↗

arXiv2010

Unravelling the role of the interface for spin injection into organic semiconductors

Whereas spintronics brings the spin degree of freedom to electronic devices, molecular/organic electronics adds the opportunity to play with the chemical versatility. Here we show how, as a contender to commonly used inorganic materials, organic/molecular based spintronics devices can exhibit very large magnetoresistance and lead to tailored spin polarizations. We report on giant tunnel magnetoresistance of up to 300% in a (La,Sr)MnO3/Alq3/Co nanometer size magnetic tunnel junction. Moreover, we propose a spin dependent transport model giving a new understanding of spin injection into organic materials/molecules. Our findings bring a new insight on how one could tune spin injection by molecular engineering and paves the way to chemical tailoring of the properties of spintronics devices.

cond-mat.mtrl-sci↗