Searcharxiv⌕ Search

arXiv subjects

Paul Martini

Publications and source records attributed to Paul Martini.

At least 55 records · Page 3Linked to original sources
arXiv2023

The Dark Energy Spectroscopic Instrument: One-dimensional power spectrum from first Lyman-$α$ forest samples with Fast Fourier Transform

We present the one-dimensional Lyman-$α$ forest power spectrum measurement using the first data provided by the Dark Energy Spectroscopic Instrument (DESI). The data sample comprises $26,330$ quasar spectra, at redshift $z > 2.1$, contained in the DESI Early Data Release and the first two months of the main survey. We employ a Fast Fourier Transform (FFT) estimator and compare the resulting power spectrum to an alternative likelihood-based method in a companion paper. We investigate methodological and instrumental contaminants associated to the new DESI instrument, applying techniques similar to previous Sloan Digital Sky Survey (SDSS) measurements. We use synthetic data based on log-normal approximation to validate and correct our measurement. We compare our resulting power spectrum with previous SDSS and high-resolution measurements. With relatively small number statistics, we successfully perform the FFT measurement, which is already competitive in terms of the scale range. At the end of the DESI survey, we expect a five times larger Lyman-$α$ forest sample than SDSS, providing an unprecedented precise one-dimensional power spectrum measurement.

astro-ph.CO↗
arXiv2023

First Detection of the BAO Signal from Early DESI Data

We present the first detection of the baryon acoustic oscillations (BAO) signal obtained using unblinded data collected during the initial two months of operations of the Stage-IV ground-based Dark Energy Spectroscopic Instrument (DESI). From a selected sample of 261,291 Luminous Red Galaxies spanning the redshift interval 0.4 < z < 1.1 and covering 1651 square degrees with a 57.9% completeness level, we report a ~5 sigma level BAO detection and the measurement of the BAO location at a precision of 1.7%. Using a Bright Galaxy Sample of 109,523 galaxies in the redshift range 0.1 < z < 0.5, over 3677 square degrees with a 50.0% completeness, we also detect the BAO feature at ~3 sigma significance with a 2.6% precision. These first BAO measurements represent an important milestone, acting as a quality control on the optimal performance of the complex robotically-actuated, fiber-fed DESI spectrograph, as well as an early validation of the DESI spectroscopic pipeline and data management system. Based on these first promising results, we forecast that DESI is on target to achieve a high-significance BAO detection at sub-percent precision with the completed 5-year survey data, meeting the top-level science requirements on BAO measurements. This exquisite level of precision will set new standards in cosmology and confirm DESI as the most competitive BAO experiment for the remainder of this decade.

astro-ph.CO↗
arXiv2023

Astrometric Calibration and Performance of the Dark Energy Spectroscopic Instrument Focal Plane

The Dark Energy Spectroscopic Instrument, consisting of 5020 robotic fiber positioners and associated systems on the Mayall telescope at Kitt Peak, Arizona, is carrying out a survey to measure the spectra of 40 million galaxies and quasars and produce the largest 3D map of the universe to date. The primary science goal is to use baryon acoustic oscillations to measure the expansion history of the universe and the time evolution of dark energy. A key function of the online control system is to position each fiber on a particular target in the focal plane with an accuracy of 11$μ$m rms 2-D. This paper describes the set of software programs used to perform this function along with the methods used to validate their performance.

astro-ph.IM↗
arXiv2023

OzDES Reverberation Mapping Program: Mg II Lags and R-L relation

The correlation between the broad line region radius and continuum luminosity ($R-L$ relation) of active galactic nuclei (AGN) is critical for single-epoch mass estimates of supermassive black holes (SMBHs). At $z \sim 1-2$, where AGN activity peaks, the $R-L$ relation is constrained by the reverberation mapping (RM) lags of the Mg II line. We present 25 Mg II lags from the Australian Dark Energy Survey (OzDES) RM project based on six years of monitoring. We define quantitative criteria to select good lag measurements and verify their reliability with simulations based on both the damped random walk stochastic model and the re-scaled, re-sampled versions of the observed lightcurves of local, well-measured AGN. Our sample significantly increases the number of Mg II lags and extends the $R-L$ relation to higher redshifts and luminosities. The relative iron line strength $\mathcal{R}_{\rm Fe}$ has little impact on the $R-L$ relation. The best-fit Mg II $R-L$ relation has a slope $α= 0.39 \pm 0.08$ with an intrinsic scatter $σ_{\rm rl} = 0.15^{+0.03}_{-0.02}$. The slope is consistent with previous measurements and shallower than the H$β$ $R-L$ relation. The intrinsic scatter of the new $R-L$ relation is substantially smaller than previous studies and comparable to the intrinsic scatter of the H$β$ $R-L$ relation. Our new $R-L$ relation will enable more precise single-epoch mass estimates and SMBH demographic studies at cosmic noon.

astro-ph.GA↗
arXiv2023

Performance of the Quasar Spectral Templates for the Dark Energy Spectroscopic Instrument

Millions of quasar spectra will be collected by the Dark Energy Spectroscopic Instrument (DESI), leading to a four-fold increase in the number of known quasars. High accuracy quasar classification is essential to tighten constraints on cosmological parameters measured at the highest redshifts DESI observes ($z>2.0$). We present the spectral templates for identification and redshift estimation of quasars in the DESI Year 1 data release. The quasar templates are comprised of two quasar eigenspectra sets, trained on spectra from the Sloan Digital Sky Survey. The sets are specialized to reconstruct quasar spectral variation observed over separate yet overlapping redshift ranges and, together, are capable of identifying DESI quasars from $0.05 < z <7.0$. The new quasar templates show significant improvement over the previous DESI quasar templates regarding catastrophic failure rates, redshift precision and accuracy, quasar completeness, and the contamination fraction in the final quasar sample.

astro-ph.IM↗
arXiv2023

The Alcock-Paczyński effect from Lyman-$α$ forest correlations: Analysis validation with synthetic data

The three-dimensional distribution of the Ly$α$ forest has been extensively used to constrain cosmology through measurements of the baryon acoustic oscillations (BAO) scale. However, more cosmological information could be extracted from the full shapes of the Ly$α$ forest correlations through the Alcock-Paczyński (AP) effect. In this work, we prepare for a cosmological analysis of the full shape of the Ly$α$ forest correlations by studying synthetic data of the extended Baryon Oscillation Spectroscopic Survey (eBOSS). We use a set of one hundred eBOSS synthetic data sets in order to validate such an analysis. These mocks undergo the same analysis process as the real data. We perform a full-shape analysis on the mean of the correlation functions measured from the one hundred eBOSS realizations, and find that our model of the Ly$α$ correlations performs well on current data sets. We show that we are able to obtain an unbiased full-shape measurement of $D_M/D_H(z_\mathrm{eff})$, where $D_M$ is the transverse comoving distance, $D_H$ is the Hubble distance, and $z_\mathrm{eff}$ is the effective redshift of the measurement. We test the fit over a range of scales, and decide to use a minimum separation of $r_\mathrm{min}=25\ h^{-1}\text{Mpc}$. We also study and discuss the impact of the main contaminants affecting Ly$α$ forest correlations, and give recommendations on how to perform such analysis with real data. While the final eBOSS Ly$α$ BAO analysis measured $D_M/D_H(z_\mathrm{eff}=2.33)$ with $4\%$ statistical precision, a full-shape fit of the same correlations could provide a $\sim2\%$ measurement.

astro-ph.CO↗
arXiv2023

Constraints on the cosmic expansion rate at redshift 2.3 from the Lyman-$α$ forest

We determine the product of the expansion rate and angular-diameter distance at redshift $z=2.3$ from the anisotropy of Lyman-$α$ (Ly$α$) forest correlations measured by the Sloan Digital Sky Survey (SDSS). Our result is the most precise from large-scale structure at $z>1$. In flat $Λ$CDM we determine the matter density to be $Ω_\mathrm{m}=0.36^{+0.03}_{-0.04}$ from Ly$α$ alone. This is a factor of two tighter than baryon acoustic oscillation results from the same data due to our use of a wide range of scales ($25<r<180$ $h^{-1}\text{Mpc}$). Using a nucleosynthesis prior, we measure the Hubble constant to be $H_0=63.2\pm2.5$ km/s/Mpc. In combination with other SDSS tracers, we find $H_0=67.2\pm0.9$ km/s/Mpc and measure the dark energy equation-of-state parameter to be $w=-0.90\pm0.12$. Our work opens a new avenue for constraining cosmology at high redshift.

astro-ph.CO↗
arXiv2023

The DESI One-Percent Survey: Exploring the Halo Occupation Distribution of Luminous Red Galaxies and Quasi-Stellar Objects with AbacusSummit

We present the first comprehensive Halo Occupation Distribution (HOD) analysis of the DESI One-Percent survey Luminous Red Galaxy (LRG) and Quasi-Stellar Object (QSO) samples. We constrain the HOD of each sample and test possible HOD extensions by fitting the redshift-space galaxy 2-point correlation functions in 0.15 < r < 32 Mpc/h in a set of fiducial redshift bins. We use AbacusSummit cubic boxes at Planck 2018 cosmology as model templates and forward model galaxy clustering with the AbacusHOD package. We achieve good fits with a standard HOD model with velocity bias, and we find no evidence for galaxy assembly bias or satellite profile modulation at the current level of statistical uncertainty. For LRGs in 0.4 < z < 0.6, we infer a satellite fraction of fsat = 11+-1%, a mean halo mass of log10 Mh = 13.40+0.02-0.02, and a linear bias of blin = 1.93+0.06-0.04. For LRGs in 0.6 < z < 0.8, we find fsat = 14+-1%, log10 Mh = 13.24+0.02-0.02, and blin = 2.08+0.03-0.03. For QSOs, we infer fsat = 3+8-2%, log10 Mh = 12.65+0.09-0.04, and blin = 2.63+0.37-0.26 in redshift range 0.8 < z < 2.1. Using these fits, we generate a large suite of high-fidelity galaxy mocks. We also study the redshift-evolution of the DESI LRG sample from z = 0.4 up to z = 1.1, revealing significant and interesting trends in mean halo mass, linear bias, and satellite fraction.

astro-ph.CO↗
arXiv2023

The Optical Corrector for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is currently measuring the spectra of 40\,million galaxies and quasars, the largest such survey ever made to probe the nature of cosmological dark energy. The 4-meter Mayall telescope at Kitt Peak National Observatory has been adapted for DESI, including the construction of a 3.2-degree diameter prime focus corrector that focuses astronomical light onto a 0.8-meter diameter focal surface with excellent image quality over the DESI bandpass of 360-980nm. The wide-field corrector includes six lenses, as large as 1.1-meters in diameter and as heavy as 237\,kilograms, including two counter-rotating wedged lenses that correct for atmospheric dispersion over Zenith angles from 0 to 60 degrees. The lenses, cells, and barrel assembly all meet precise alignment tolerances on the order of tens of microns. The barrel alignment is maintained throughout a range of observing angles and temperature excursions in the Mayall dome by use of a hexapod, which is itself supported by a new cage, ring, and truss structure. In this paper we describe the design, fabrication, and performance of the new corrector and associated structure, focusing on how they meet DESI requirements. In particular we describe the prescription and specifications of the lenses, design choices and error budgeting of the barrel assembly, stray light mitigations, and integration and test at the Mayall telescope. We conclude with some validation highlights that demonstrate the successful corrector on-sky performance, and list some lessons learned during the multi-year fabrication phase.

astro-ph.IM↗
arXiv2023

A framework to measure the properties of intergalactic metal systems with two-point flux statistics

The abundance, temperature, and clustering of metals in the intergalactic medium are important parameters for understanding their cosmic evolution and quantifying their impact on cosmological analysis with the Ly $α$ forest. The properties of these systems are typically measured from individual quasar spectra redward of the quasar's Ly $α$ emission line, yet that approach may provide biased results due to selection effects. We present an alternative approach to measure these properties in an unbiased manner with the two-point statistics commonly employed to quantify large-scale structure. Our model treats the observed flux of a large sample of quasar spectra as a continuous field and describes the one-dimensional, two-point statistics of this field with three parameters per ion: the abundance (column density distribution), temperature (Doppler parameter) and clustering (cloud-cloud correlation function). We demonstrate this approach on multiple ions (e.g., C IV, Si IV, Mg II) with early data from the Dark Energy Spectroscopic Instrument (DESI) and high-resolution spectra from the literature. Our initial results show some evidence that the C IV abundance is higher than previous measurements and evidence for abundance evolution over time. The first full year of DESI observations will have over an order of magnitude more quasar spectra than this study. In a future paper we will use those data to measure the growth of clustering and its impact on the Ly $α$ forest, as well as test other DESI analysis infrastructure such as the pipeline noise estimates and the resolution matrix.

astro-ph.CO↗
arXiv2023

Analysis of the impact of broad absorption lines on quasar redshift measurements with synthetic observations

Accurate quasar classifications and redshift measurements are increasingly important to precision cosmology experiments. Broad absorption line (BAL) features are present in 15-20\% of all quasars, and these features can introduce systematic redshift errors, and in extreme cases produce misclassifications. We quantitatively investigate the impact of BAL features on quasar classifications and redshift measurements with synthetic spectra that were designed to match observations by the Dark Energy Spectroscopic Instrument (DESI) survey. Over the course of five years, DESI aims to measure spectra for 40 million galaxies and quasars, including nearly three million quasars. Our synthetic quasar spectra match the signal-to-noise ratio and redshift distributions of the first year of DESI observations, and include the same synthetic quasar spectra both with and without BAL features. We demonstrate that masking the locations of the BAL features decreases the redshift errors by about 1\% and reduces the number of catastrophic redshift errors by about 80\%. We conclude that identifying and masking BAL troughs should be a standard part of the redshift determination step for DESI and other large-scale spectroscopic surveys of quasars.

astro-ph.CO↗
arXiv2023

Overview of the DESI Milky Way Survey

We describe the Milky Way Survey (MWS) that will be undertaken with the Dark Energy Spectroscopic Instrument (DESI) on the Mayall 4m telescope at the Kitt Peak National Observatory. Over the next 5 yr DESI MWS will observe approximately seven million stars at Galactic latitudes |b|>20 degrees, with an inclusive target selection scheme focused on the thick disk and stellar halo. MWS will also include several high-completeness samples of rare stellar types, including white dwarfs, low-mass stars within 100pc of the Sun, and horizontal branch stars. We summarize the potential of DESI to advance understanding of Galactic structure and stellar evolution. We introduce the final definitions of the main MWS target classes and estimate the number of stars in each class that will be observed. We describe our pipelines for deriving radial velocities, atmospheric parameters, and chemical abundances. We use ~500,000 spectra of unique stellar targets from the DESI Survey Validation program (SV) to demonstrate that our pipelines can measure radial velocities to ~1 km/s and [Fe/H] accurate to ~0.2 dex for typical stars in our main sample. We find the stellar parameter distributions from ~100 sq. deg of SV observations with >90% completeness on our main sample are in good agreement with expectations from mock catalogs and previous surveys.

astro-ph.GA↗
arXiv2023

DESI Observations of the Andromeda Galaxy: Revealing the Immigration History of our Nearest Neighbor

We present DESI observations of the inner halo of M31, which reveal the kinematics of a recent merger - a galactic immigration event - in exquisite detail. Of the 11,416 sources studied in 3.75 hour of on-sky exposure time, 7,438 are M31 sources with well measured radial velocities. The observations reveal intricate coherent kinematic structure in the positions and velocities of individual stars: streams, wedges, and chevrons. While hints of coherent structures have been previously detected in M31, this is the first time they have been seen with such detail and clarity in a galaxy beyond the Milky Way. We find clear kinematic evidence for shell structures in the Giant Stellar Stream, the Northeast Shelf and Western Shelf regions. The kinematics are remarkably similar to the predictions of dynamical models constructed to explain the spatial morphology of the inner halo. The results are consistent with the interpretation that much of the substructure in the inner halo of M31 is produced by a single galactic immigration event 1 - 2 Gyr ago. Significant numbers of metal-rich stars ([Fe/H]$>-0.5$) are present in all of the detected substructures, suggesting that the immigrating galaxy had an extended star formation history. We also investigate the ability of the shells and Giant Stellar Stream to constrain the gravitational potential of M31, and estimate the mass within a projected radius of 125 kpc to be ${\rm log_{10}}\, M_{\rm NFW}(<125\,{\rm kpc})/M_\odot = 11.80_{-0.10}^{+0.12}$. The results herald a new era in our ability to study stars on a galactic scale and the immigration histories of galaxies.

astro-ph.GA↗
arXiv2023

The Target-selection Pipeline for the Dark Energy Spectroscopic Instrument

In 2021 May, the Dark Energy Spectroscopic Instrument (DESI) began a 5 yr survey of approximately 50 million total extragalactic and Galactic targets. The primary DESI dark-time targets are emission line galaxies (ELGs), luminous red galaxies (LRGs) and quasars (QSOs). In bright time, DESI will focus on two surveys known as the Bright Galaxy Survey (BGS) and the Milky Way Survey (MWS). DESI also observes a selection of "secondary" targets for bespoke science goals. This paper gives an overview of the publicly available pipeline (desitarget) used to process targets for DESI observations. Highlights include details of the different DESI survey targeting phases, the targeting ID (TARGETID) used to define unique targets, the bitmasks used to indicate a particular type of target, the data model and structure of DESI targeting files, and examples of how to access and use the desitarget code base. This paper will also describe "supporting" DESI target classes, such as standard stars, sky locations, and random catalogs that mimic the angular selection function of DESI targets. The DESI target selection pipeline is complex and sizable; this paper attempts to summarize the most salient information required to understand and work with DESI targeting data.

astro-ph.IM↗
arXiv2022

The impact and mitigation of broad absorption line quasars in Lyman$-α$ forest correlations

Correlations in and with the flux transmission of the Lyman$-α$ (Ly$α$) forest in the spectra of high-redshift quasars are powerful cosmological tools, yet these measurements can be compromised if the intrinsic quasar continuum is significantly uncertain. One particularly problematic case is broad absorption line (BAL) quasars, which exhibit blueshifted absorption associated with many spectral features that are consistent with outflows of up to $\sim0.1c$. As these absorption features can both fall in the forest region and be difficult to distinguish from Ly$α$ absorption, cosmological analyses eliminate the 12 - 16% of quasars that exhibit BALs. In this paper we explore an alternate approach that includes BALs in the Ly$α$ auto correlation function, with the exception of the expected locations of the BAL absorption troughs. This procedure returns over 95% of the pathlength that is lost by the exclusion of BALs, as well as increases the density of sightlines. We show that including BAL quasars reduces the fractional uncertainty in the covariance matrix and correlation function and does not significantly change the shape of the correlation function relative to analyses that exclude BAL quasars. We also evaluate different definitions of BALs, masking strategies, and potential differences in the quasar continuum in the forest region for BALs with different amounts of absorption.

astro-ph.CO↗
arXiv2022

The effect of quasar redshift errors on Lyman-$α$ forest correlation functions

Using synthetic Lyman-$α$ forests from the Dark Energy Spectroscopic Instrument (DESI) survey, we present a study of the impact of errors in the estimation of quasar redshift on the Lyman-$α$ correlation functions. Estimates of quasar redshift have large uncertainties of a few hundred $\text{km s}^{-1}\,$ due to the broadness of the emission lines and the intrinsic shifts from other emission lines. We inject Gaussian random redshift errors into the mock quasar catalogues, and measure the auto-correlation and the Lyman-$α$-quasar cross-correlation functions. We find a smearing of the BAO feature in the radial direction, but changes in the peak position are negligible. However, we see a significant unphysical correlation for small separations transverse to the line of sight which increases with the amplitude of the redshift errors. We interpret this contamination as a result of the broadening of emission lines in the measured mean continuum, caused by quasar redshift errors, combined with the unrealistically strong clustering of the simulated quasars on small scales.

astro-ph.CO↗
arXiv2022

Atomic Gold Ions Clustered with Noble Gases: Helium, Neon, Argon, Krypton, and Xenon

High-resolution mass spectra of helium droplets doped with gold and ionized by electrons reveal He$_n$Au$^+$ cluster ions. Additional doping with heavy noble gases results in NenAu+, Ar$_n$Au$^+$, Kr$_n$Au$^+$, and Xe$_n$Au$^+$ cluster ions. The high stability predicted for covalently bonded Ar$_2$Au$^+$, Kr$_2$Au$^+$, and Xe$_2$Au$^+$ is reflected in their relatively high abundance. Surprisingly, the abundance of Ne$_2$Au$^+$ which is predicted to have zero covalent bonding character and no enhanced stability features a local maximum, too. The predicted size and structure of complete solvation shells surrounding ions with essentially non-directional bonding depends primarily on the ratio $σ$* of the ion-ligand $versus$ the ligand-ligand distance. For Au$^+$ solvated in helium and neon the ratio $σ$* is slightly below 1, favoring icosahedral packing in agreement with a maximum observed in the corresponding abundance distributions at $n$ = 12. He$_n$Au$^+$ appears to adopt two additional solvation shells of $I_h$ symmetry, containing 20 and 12 atoms, respectively. For Ar$_n$Au$^+$, with $σ$* $\approx$ 0.67, one would expect a solvation shell of octahedral symmetry, in agreement with an enhanced ion abundance at $n$ = 6. Another anomaly in the ion abundance at Ar$_9$Au$^+$ matches a local maximum in its computed dissociation energy.

physics.atm-clus↗
arXiv2022

Solvation of Silver Ions in Noble Gases He, Ne, Ar, Kr, and Xe

We use a novel technique to solvate silver cations in small clusters of noble gases. The technique involves formation of large, superfluid helium nanodroplets that are subsequently electron ionized, mass-selected by deflection in an electric field, and doped with silver atoms and noble gases (Ng) in pickup cells. Excess helium is then stripped from the doped nanodroplets by multiple collisions with helium gas at room temperature, producing cluster ions that contain no more than a few dozen noble gas atoms and just a few (or no) silver atoms. Under gentle stripping conditions helium atoms remain attached to the cluster ions, demonstrating their low vibrational temperature. Under harsher stripping conditions some of the heavier noble gas atoms will be evaporated as well, thus enriching stable clusters Ng$_n$Ag$_m^+$ at the expense of less stable ones. This results in local anomalies in the cluster ion abundance which is measured in a high-resolution time-of-flight mass spectrometer. Based on these data we identify specific "magic" sizes n of particularly stable ions. There is no evidence though for enhanced stability of Ng$_2$Ag$^+$, in contrast to the high stability of Ng$_2$Au$^+$ that derives from the covalent nature of the bond for heavy noble gases. "Magic" sizes are also identified for Ag$_2^+$ dimer ions complexed with He or Kr. Structural models will be tentatively proposed. A sequence of magic numbers $n$ = 12, 32, 44, indicative of three concentric solvation shells of icosahedral symmetry, is observed for He$_n$H$_2$O$^+$.

physics.atm-clus↗