arXiv subjects

Paul Martini

Publications and source records attributed to Paul Martini.

At least 73 records · Page 4Linked to original sources

arXiv2022

Phosphorus cluster cations formed in doped helium nanodroplets are different

Positively charged cluster ions of phosphorus were formed upon electron ionization of doped helium nanodroplets. The vapors of red phosphorus and a phosphate sample were picked up into neutral and charged helium nanodroplets. Independent on the conditions used, the cluster size distributions exhibit pronounced odd-even oscillations that are opposite to almost all experimental and theoretical patterns published in the literature. The low temperature environment of the superfluid He matrix quenches fragmentation and the charged phosphorus clusters resemble the structure of the neutral precursors.

physics.atm-clus↗

arXiv2022

The MegaMapper: A Stage-5 Spectroscopic Instrument Concept for the Study of Inflation and Dark Energy

In this white paper, we present the MegaMapper concept. The MegaMapper is a proposed ground-based experiment to measure Inflation parameters and Dark Energy from galaxy redshifts at $2<z<5$. In order to achieve path-breaking results with a mid-scale investment, the MegaMapper combines existing technologies for critical path elements and pushes innovative development in other design areas. To this aim, we envision a 6.5-m Magellan-like telescope, with a newly designed wide field, coupled with DESI spectrographs, and small-pitch robots to achieve multiplexing of at least 26,000. This will match the expected achievable target density in the redshift range of interest and provide a 10x capability over the existing state-of the art, without a 10x increase in project budget.

astro-ph.IM↗

arXiv2022

A Spectroscopic Road Map for Cosmic Frontier: DESI, DESI-II, Stage-5

In this white paper, we present an experimental road map for spectroscopic experiments beyond DESI. DESI will be a transformative cosmological survey in the 2020s, mapping 40 million galaxies and quasars and capturing a significant fraction of the available linear modes up to z=1.2. DESI-II will pilot observations of galaxies both at much higher densities and extending to higher redshifts. A Stage-5 experiment would build out those high-density and high-redshift observations, mapping hundreds of millions of stars and galaxies in three dimensions, to address the problems of inflation, dark energy, light relativistic species, and dark matter. These spectroscopic data will also complement the next generation of weak lensing, line intensity mapping and CMB experiments and allow them to reach their full potential.

astro-ph.CO↗

arXiv2022

Target Selection and Validation of DESI Quasars

The Dark Energy Spectroscopic Instrument (DESI) survey will measure large-scale structures using quasars as direct tracers of dark matter in the redshift range 0.9 2.1. We present several methods to select candidate quasars for DESI, using input photometric imaging in three optical bands (g, r, z) from the DESI Legacy Imaging Surveys and two infrared bands (W1, W2) from the Wide-field Infrared Explorer (WISE). These methods were extensively tested during the Survey Validation of DESI. In this paper, we report on the results obtained with the different methods and present the selection we optimized for the DESI main survey. The final quasar target selection is based on a Random Forest algorithm and selects quasars in the magnitude range 16.5 99% purity for a nominal effective exposure time of ~1000s. With a 310 per sq. deg. target density, the main selection allows DESI to select more than 200 QSOs per sq. deg. (including 60 quasars with z>2.1), exceeding the project requirements by 20%. The redshift distribution of the selected quasars is in excellent agreement with quasar luminosity function predictions.

astro-ph.CO↗

arXiv2022

DESI Bright Galaxy Survey: Final Target Selection, Design, and Validation

Over the next five years, the Dark Energy Spectroscopic Instrument (DESI) will use 10 spectrographs with 5000 fibers on the 4m Mayall Telescope at Kitt Peak National Observatory to conduct the first Stage-IV dark energy galaxy survey. At $z < 0.6$, the DESI Bright Galaxy Survey (BGS) will produce the most detailed map of the Universe during the dark energy dominated epoch with redshifts of >10 million galaxies over 14,000 deg$^2$. In this work, we present and validate the final BGS target selection and survey design. From the Legacy Surveys, BGS will target a $r < 19.5$ magnitude-limited sample (BGS Bright); a fainter $19.5 < r < 20.175$ sample, color-selected to have high redshift efficiency (BGS Faint); and a smaller low-z quasar sample. BGS will observe these targets using exposure times, scaled to achieve uniform completeness, and visit each point on the footprint three times. We use observations from the Survey Validation programs conducted prior to the main survey along with realistic simulations to show that BGS can complete its strategy and make optimal use of `bright' time. We demonstrate that BGS targets have stellar contamination <1% and that their densities do not depend strongly on imaging properties. We also confirm that BGS Bright will achieve >80% fiber assignment efficiency. Finally, we show that BGS Bright and Faint will achieve >95% redshift success rates with no significant dependence on observing conditions. BGS meets the requirements for an extensive range of scientific applications. BGS will yield the most precise Baryon Acoustic Oscillations and Redshift-Space Distortions measurements at $z < 0.4$. It also presents opportunities to exploit new methods that require highly complete and dense galaxy samples (e.g. N-point statistics, multi-tracers). BGS further provides a powerful tool to study galaxy populations and the relations between galaxies and dark matter.

astro-ph.CO↗

arXiv2022

Observational window effects on multi-object Reverberation Mapping

Contemporary reverberation mapping campaigns are employing wide-area photometric data and high-multiplex spectroscopy to efficiently monitor hundreds of active galactic nuclei (AGN). However, the interaction of the window function(s) imposed by the observation cadence with the reverberation lag and AGN variability time scales (intrinsic to each source over a range of luminosities) impact our ability to recover these fundamental physical properties. Time dilation effects due to the sample source redshift distribution introduces added complexity. We present comprehensive analysis of the implications of observational cadence, seasonal gaps and campaign baseline duration (i.e., the survey window function) for reverberation lag recovery. We find the presence of a significant seasonal gap dominates the efficacy of any given campaign strategy for lag recovery across the parameter space, particularly for those sources with observed-frame lags above 100 days. Using the OzDES survey as a baseline, we consider the implications of this analysis for the 4MOST/TiDES campaign providing concurrent follow-up of the LSST deep-drilling fields, as well as upcoming programs. We conclude that the success of such surveys will be critically limited by the seasonal visibility of some potential field choices, but show significant improvement from extending the baseline. Optimising the sample selection to fit the window function will improve survey efficacy.

astro-ph.GA↗

arXiv2022

The Robotic Multi-Object Focal Plane System of the Dark Energy Spectroscopic Instrument (DESI)

A system of 5,020 robotic fiber positioners was installed in 2019 on the Mayall Telescope, at Kitt Peak National Observatory. The robots automatically re-target their optical fibers every 10 - 20 minutes, each to a precision of several microns, with a reconfiguration time less than 2 minutes. Over the next five years, they will enable the newly-constructed Dark Energy Spectroscopic Instrument (DESI) to measure the spectra of 35 million galaxies and quasars. DESI will produce the largest 3D map of the universe to date and measure the expansion history of the cosmos. In addition to the 5,020 robotic positioners and optical fibers, DESI's Focal Plane System includes 6 guide cameras, 4 wavefront cameras, 123 fiducial point sources, and a metrology camera mounted at the primary mirror. The system also includes associated structural, thermal, and electrical systems. In all, it contains over 675,000 individual parts. We discuss the design, construction, quality control, and integration of all these components. We include a summary of the key requirements, the review and acceptance process, on-sky validations of requirements, and lessons learned for future multi-object, fiber-fed spectrographs.

astro-ph.IM↗

arXiv2021

OzDES Reverberation Mapping Program: Lag recovery reliability for 6-year CIV analysis

We present the statistical methods that have been developed to analyse the OzDES reverberation mapping sample. To perform this statistical analysis we have created a suite of customisable simulations that mimic the characteristics of each source in the OzDES sample. These characteristics include: the variability in the photometric and spectroscopic lightcurves, the measurement uncertainties, and the observational cadence. By simulating the sources in the OzDES sample that contain the CIV emission line, we developed a set of criteria that rank the reliability of a recovered time lag depending on the agreement between different recovery methods, the magnitude of the uncertainties, and the rate at which false positives were found in the simulations. These criteria were applied to simulated light curves and these results used to estimate the quality of the resulting Radius-Luminosity relation.We grade the results using three quality levels (gold, silver and bronze). The input slope of the R-L relation was recovered within $1σ$ for each of the three quality samples, with the gold standard having the lowest dispersion with a recovered a R-L relation slope of $0.454\pm 0.016$ with an input slope of 0.47. Future work will apply these methods to the entire OzDES sample of 771 AGN.

astro-ph.GA↗

arXiv2021

OzDES Reverberation Mapping Program: The first Mg II lags from five years of monitoring

Reverberation mapping is a robust method to measure the masses of supermassive black holes (SMBHs) outside of the local Universe. Measurements of the radius -- luminosity ($R-L$) relation using the Mg II emission line are critical for determining these masses near the peak of quasar activity at $z \approx 1 - 2$, and for calibrating secondary mass estimators based on Mg II that can be applied to large samples with only single-epoch spectroscopy. We present the first nine Mg II lags from our five-year Australian Dark Energy Survey (OzDES) reverberation mapping program, which substantially improves the number and quality of Mg II lag measurements. As the Mg II feature is somewhat blended with iron emission, we model and subtract both the continuum and iron contamination from the multi-epoch spectra before analyzing the Mg II line. We also develop a new method of quantifying correlated spectroscopic calibration errors based on our numerous, contemporaneous observations of F-stars. The lag measurements for seven of our nine sources are consistent with both the H$β$ and Mg II $R-L$ relations reported by previous studies. Our simulations verify the lag reliability of our nine measurements, and we estimate that the median false positive rate of the lag measurements is $4\%$.

astro-ph.GA↗

arXiv2021

Installation of the Dark Energy Spectroscopic Instrument at the Mayall 4-meter telescope

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. We describe the installation of the major elements of the instrument at the Mayall 4m telescope, completed in late 2019. The previous prime focus corrector, spider vanes, and upper rings were removed from the Mayall's Serrurier truss and replaced with the newly-constructed DESI ring, vanes, cage, hexapod, and optical corrector. The new corrector was optically aligned with the primary mirror using a laser tracker system. The DESI focal plane system was integrated to the corrector, with each of its ten 500-fiber-positioner petal segments installed using custom installation hardware and the laser tracker. Ten DESI spectrographs with 30 cryostats were installed in a newly assembled clean room in the Large Coude Room. The ten cables carrying 5000 optical fibers from the positioners in the focal plane were routed down the telescope through cable wraps at the declination and hour angle axes, and their integral slitheads were integrated with the ten spectrographs. The fiber view camera assembly was installed to the Mayall's primary mirror cell. Servers for the instrument control system replaced existing computer equipment. The fully integrated instrument has been commissioned and is ready to start its operations phase.

astro-ph.IM↗

arXiv2021

The DESI Sky Continuum Monitor System

The Dark Energy Spectroscopic Instrument (DESI) is an ongoing spectroscopic survey to measure the dark energy equation of state to unprecedented precision. We describe the DESI Sky Continuum Monitor System, which tracks the night sky brightness as part of a system that dynamically adjusts the spectroscopic exposure time to produce more uniform data quality and to maximize observing efficiency. The DESI dynamic exposure time calculator (ETC) will combine sky brightness measurements from the Sky Monitor with data from the guider system to calculate the exposure time to achieve uniform signal-to-noise ratio (SNR) in the spectra under various observing conditions. The DESI design includes 20 sky fibers, and these are split between two identical Sky Monitor units to provide redundancy. Each Sky Monitor unit uses an SBIG STXL-6303e CCD camera and supports an eight-position filter wheel. Both units have been completed and delivered to the Mayall Telescope at the Kitt Peak National Observatory. Commissioning results show that the Sky Monitor delivers the required performance necessary for the ETC.

astro-ph.IM↗

arXiv2021

Performance of Kitt Peak's Mayall 4-meter Telescope During DESI Commissioning

In preparation for the Dark Energy Spectroscopic Instrument (DESI), a new top end was installed on the Mayall 4-meter telescope at Kitt Peak National Observatory. The refurbished telescope and the DESI instrument were successfully commissioned on sky between 2019 October and 2020 March. Here we describe the pointing, tracking and imaging performance of the Mayall telescope equipped with its new DESI prime focus corrector, as measured by six guider cameras sampling the outer edge of DESI's focal plane. Analyzing ~500,000 guider images acquired during commissioning, we find a median delivered image FWHM of 1.1 arcseconds (in the r-band at 650 nm), with the distribution extending to a best-case value of ~0.6 arcseconds. The point spread function is well characterized by a Moffat profile with a power-law index of $β$ ~ 3.5 and little dependence of $β$ on FWHM. The shape and size of the PSF delivered by the new corrector at a field angle of 1.57 degrees are very similar to those measured with the old Mayall corrector on axis. We also find that the Mayall achieves excellent pointing accuracy (several arcseconds RMS) and minimal open-loop tracking drift (< 1 milliarcsecond per second), improvements on the telecope's pre-DESI performance. In the future, employing DESI's active focus adjustment capabilities will likely further improve the Mayall/DESI delivered image quality.

astro-ph.IM↗

arXiv2020

Discovery of a Candidate Binary Supermassive Black Hole in a Periodic Quasar from Circumbinary Accretion Variability

Binary supermassive black holes (BSBHs) are expected to be a generic byproduct from hierarchical galaxy formation. The final coalescence of BSBHs is thought to be the loudest gravitational wave (GW) siren, yet no confirmed BSBH is known in the GW-dominated regime. While periodic quasars have been proposed as BSBH candidates, the physical origin of the periodicity has been largely uncertain. Here we report discovery of a periodicity (P=1607$\pm$7 days) at 99.95% significance (with a global p-value of ~$10^{-3}$ accounting for the look elsewhere effect) in the optical light curves of a redshift 1.53 quasar, SDSS J025214.67-002813.7. Combining archival Sloan Digital Sky Survey data with new, sensitive imaging from the Dark Energy Survey, the total ~20-yr time baseline spans ~4.6 cycles of the observed 4.4-yr (restframe 1.7-yr) periodicity. The light curves are best fit by a bursty model predicted by hydrodynamic simulations of circumbinary accretion disks. The periodicity is likely caused by accretion rate modulation by a milli-parsec BSBH emitting GWs, dynamically coupled to the circumbinary accretion disk. A bursty hydrodynamic variability model is statistically preferred over a smooth, sinusoidal model expected from relativistic Doppler boost, a kinematic effect proposed for PG1302-102. Furthermore, the frequency dependence of the variability amplitudes disfavors Doppler boost, lending independent support to the circumbinary accretion variability hypothesis. Given our detection rate of one BSBH candidate from circumbinary accretion variability out of 625 quasars, it suggests that future large, sensitive synoptic surveys such as the Vera C. Rubin Observatory Legacy Survey of Space and Time may be able to detect hundreds to thousands of candidate BSBHs from circumbinary accretion with direct implications for Laser Interferometer Space Antenna.

astro-ph.GA↗

arXiv2020

Probing galaxy evolution in massive clusters using ACT and DES: splashback as a cosmic clock

We measure the projected number density profiles of galaxies and the splashback feature in clusters selected by the Sunyaev--Zeldovich (SZ) effect from the Advanced Atacama Cosmology Telescope (AdvACT) survey using galaxies observed by the Dark Energy Survey (DES). The splashback radius for the complete galaxy sample is consistent with theoretical measurements from CDM-only simulations, and is located at $2.4^{+0.3}_{-0.4}$ Mpc $h^{-1}$. We split the sample based on galaxy color and find significant differences in the profile shapes. Red galaxies and those in the green valley show a splashback-like minimum in their slope profile consistent with theoretical predictions, while the bluest galaxies show a weak feature that appears at a smaller radius. We develop a mapping of galaxies to subhalos in $N$-body simulations by splitting subhalos based on infall time onto the cluster halos. We find that the location of the steepest slope and differences in the shapes of the profiles can be mapped to differences in the average time of infall of galaxies of different colors. The minima of the slope in the galaxy profiles trace a discontinuity in the phase space of dark matter halos. By relating spatial profiles to infall time for galaxies of different colours, we can use splashback as a clock to understand galaxy quenching. We find that red galaxies have on average been in their clusters for over $3.2 ~\rm Gyrs$, green galaxies about $2.2 ~\rm Gyrs$, while blue galaxies have been accreted most recently and have not reached apocenter. Using the information from the complete radial profiles, we fit a simple quenching model and find that the onset of galaxy quenching in clusters occurs after a delay of about a gigayear, and that galaxies quench rapidly thereafter with an exponential timescale of $0.6$ Gyr.

astro-ph.GA↗

arXiv2020

The Sloan Digital Sky Survey Quasar Catalog: Sixteenth Data Release

We present the final Sloan Digital Sky Survey IV (SDSS-IV) quasar catalog from Data Release 16 of the extended Baryon Oscillation Spectroscopic Survey (eBOSS). This catalog comprises the largest selection of spectroscopically confirmed quasars to date. The full catalog includes two sub-catalogs: a "superset" of all SDSS-IV/eBOSS objects targeted as quasars containing 1,440,615 observations and a quasar-only catalog containing 750,414 quasars, including 225,082 new quasars appearing in an SDSS data release for the first time, as well as known quasars from SDSS-I/II/III. We present automated identification and redshift information for these quasars alongside data from visual inspections for 320,161 spectra. The quasar-only catalog is estimated to be 99.8% complete with 0.3% to 1.3% contamination. Automated and visual inspection redshifts are supplemented by redshifts derived via principal component analysis and emission lines. We include emission line redshifts for H$α$, H$β$, Mg II, C III], C IV, and Ly$α$. Identification and key characteristics generated by automated algorithms are presented for 99,856 Broad Absorption Line quasars and 35,686 Damped Lyman Alpha quasars. In addition to SDSS photometric data, we also present multi-wavelength data for quasars from GALEX, UKIDSS, WISE, FIRST, ROSAT/2RXS, XMM-Newton, and Gaia. Calibrated digital optical spectra for these quasars can be obtained from the SDSS Science Archive Server.

astro-ph.GA↗

arXiv2020

Dust Reverberation Mapping in Distant Quasars from Optical and Mid-Infrared Imaging Surveys

The size of the dust torus in Active Galactic Nuclei (AGN) and their high-luminosity counterparts, quasars, can be inferred from the time delay between UV/optical accretion disk continuum variability and the response in the mid-infrared (MIR) torus emission. This dust reverberation mapping (RM) technique has been successfully applied to $\sim 70$ $z\lesssim 0.3$ AGN and quasars. Here we present first results of our dust RM program for distant quasars covered in the SDSS Stripe 82 region combining $\sim 20$-yr ground-based optical light curves with 10-yr MIR light curves from the WISE satellite. We measure a high-fidelity lag between W1-band (3.4 $μ$m) and $g$ band for 587 quasars over $0.3\lesssim z\lesssim 2$ ($\left \sim 0.8$) and two orders of magnitude in quasar luminosity. They tightly follow (intrinsic scatter $\sim 0.17$ dex in lag) the IR lag-luminosity relation observed for $z<0.3$ AGN, revealing a remarkable size-luminosity relation for the dust torus over more than four decades in AGN luminosity, with little dependence on additional quasar properties such as Eddington ratio and variability amplitude. This study motivates further investigations in the utility of dust RM for cosmology, and strongly endorses a compelling science case for the combined 10-yr Vera C. Rubin Observatory Legacy Survey of Space and Time (optical) and 5-yr Nancy Grace Roman Space Telescope 2$μ$m light curves in a deep survey for low-redshift AGN dust RM with much lower luminosities and shorter, measurable IR lags. The compiled optical and MIR light curves for 7,384 quasars in our parent sample are made public with this work.

astro-ph.GA↗

arXiv2020

Dark Energy Survey Year 1 Results: Cosmological Constraints from Cluster Abundances and Weak Lensing

We perform a joint analysis of the counts and weak lensing signal of redMaPPer clusters selected from the Dark Energy Survey (DES) Year 1 dataset. Our analysis uses the same shear and source photometric redshifts estimates as were used in the DES combined probes analysis. Our analysis results in surprisingly low values for $S_8 =σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.65\pm 0.04$, driven by a low matter density parameter, $Ω_{\rm m}=0.179^{+0.031}_{-0.038}$, with $σ_8-Ω_{\rm m}$ posteriors in $2.4σ$ tension with the DES Y1 3x2pt results, and in $5.6σ$ with the Planck CMB analysis. These results include the impact of post-unblinding changes to the analysis, which did not improve the level of consistency with other data sets compared to the results obtained at the unblinding. The fact that multiple cosmological probes (supernovae, baryon acoustic oscillations, cosmic shear, galaxy clustering and CMB anisotropies), and other galaxy cluster analyses all favor significantly higher matter densities suggests the presence of systematic errors in the data or an incomplete modeling of the relevant physics. Cross checks with X-ray and microwave data, as well as independent constraints on the observable--mass relation from SZ selected clusters, suggest that the discrepancy resides in our modeling of the weak lensing signal rather than the cluster abundance. Repeating our analysis using a higher richness threshold ($λ\ge 30$) significantly reduces the tension with other probes, and points to one or more richness-dependent effects not captured by our model.

astro-ph.CO↗

arXiv2020

Quasar Accretion Disk Sizes from Continuum Reverberation Mapping in the DES Standard Star Fields

Measurements of the physical properties of accretion disks in active galactic nuclei are important for better understanding the growth and evolution of supermassive black holes. We present the accretion disk sizes of 22 quasars from continuum reverberation mapping with data from the Dark Energy Survey (DES) standard star fields and the supernova C fields. We construct continuum lightcurves with the \textit{griz} photometry that span five seasons of DES observations. These data sample the time variability of the quasars with a cadence as short as one day, which corresponds to a rest frame cadence that is a factor of a few higher than most previous work. We derive time lags between bands with both JAVELIN and the interpolated cross-correlation function method, and fit for accretion disk sizes using the JAVELIN Thin Disk model. These new measurements include disks around black holes with masses as small as $\sim10^7$ $M_{\odot}$, which have equivalent sizes at 2500Å\, as small as $\sim 0.1$ light days in the rest frame. We find that most objects have accretion disk sizes consistent with the prediction of the standard thin disk model when we take disk variability into account. We have also simulated the expected yield of accretion disk measurements under various observational scenarios for the Large Synoptic Survey Telescope Deep Drilling Fields. We find that the number of disk measurements would increase significantly if the default cadence is changed from three days to two days or one day.

astro-ph.GA↗