arXiv subjects

Paul Miller

Publications and source records attributed to Paul Miller.

10 recordsLinked to original sources

arXiv2025

Epitaxial formation of ultrathin HfO2 on graphene by sequential oxidation

We demonstrate the formation of epitaxial, ultrathin hafnia (HfO2) on graphene. Monoclinic hafnia (m-HfO2) forms as the end of a series of sequential oxidation reactions. Starting from Hf metal grown epitaxially on graphene, oxidation leads first to an amorphous suboxide (a-HfOx), then to a crystalline, hexagonal suboxide (h-HfOx) in epitaxial relationship with the substrate, and finally to m-HfO2 that is also epitaxial. We use scanning transmission electron microscopy to characterize the epitaxial relationships and to investigate the structure of h-HfOx. We propose a series of displacive transformations that relate the different crystalline phases and are consistent with the observed epitaxial relationships with the graphene substrate. ReaxFF based reactive molecular dynamics simulations confirm our model of the oxide phase sequencing, and illustrate the role of graphene in promoting oxide crystallization. Our results suggest a way to achieve heteroepitaxial integration of high-performance, crystalline dielectrics with two dimensional (2D) semiconductors with an atomically sharp interface, which is also relevant to hafnia phase engineering.

cond-mat.mtrl-sci↗

arXiv2024

Hard-label based Small Query Black-box Adversarial Attack

We consider the hard label based black box adversarial attack setting which solely observes predicted classes from the target model. Most of the attack methods in this setting suffer from impractical number of queries required to achieve a successful attack. One approach to tackle this drawback is utilising the adversarial transferability between white box surrogate models and black box target model. However, the majority of the methods adopting this approach are soft label based to take the full advantage of zeroth order optimisation. Unlike mainstream methods, we propose a new practical setting of hard label based attack with an optimisation process guided by a pretrained surrogate model. Experiments show the proposed method significantly improves the query efficiency of the hard label based black-box attack across various target model architectures. We find the proposed method achieves approximately 5 times higher attack success rate compared to the benchmarks, especially at the small query budgets as 100 and 250.

cs.LG↗

arXiv2023

Large Eddy Simulation of Non-stationary Hurricane Boundary Layer Winds

Recent extreme tropical cyclones caused extensive damages to critical civil infrastructure globally. To better capture the unique hurricane wind characteristics, a large eddy simulation (LES) Hurricane Boundary Layer (HBL) model is developed by considering the variation of meso-scale kinematic and thermodynamic conditions. An asymmetric model is adopted to obtain the gradient wind velocity using the National Hurricane Center data. The meso-scale thermal conditions are obtained by extracting the hourly air temperature and relative humidity profiles from generated proxy soundings. Measurements recorded at the Aransas County airport during Hurricane Harvey and that at the City of Naples during Irma are used to validate the developed LES model. Research results show that the simulated 10-minute average wind speed and direction are consistent with the observations. The developed model can well predict the high wind turbulences, which are around 20% in Hurricane Harvey and 26% in Hurricane Irma. The 3-s gust wind speeds reach 62.4 m/s at 10-m elevation during Hurricane Harvey and 53.5 m/s at 15-m elevation during Hurricane Irma, close to the field observed data of 61.3 m/s and 54.2 m/s, respectively. The simulated 3-s gust factors are close to the observation except at some moments with significant variations because of the poorly understood physical phenomena. The simulated wind spectrum in longitudinal and lateral directions agrees well with the observed results. In summary, the developed LES-based HBL model can capture the main characteristics of hurricane structure and turbulence characteristics and is applicable for modeling civil infrastructure exposed to hurricanes.

physics.flu-dyn↗

arXiv2023

An Open-Source Multi-functional Testing Platform for Optical Phase Change Materials

Owing to their unique tunable optical properties, chalcogenide phase change materials are increasingly being investigated for optics and photonics applications. However, in situ characterization of their phase transition characteristics is a capability that remains inaccessible to many researchers. In this article, we introduce a multi-functional silicon microheater platform capable of in situ measurement of structural, kinetic, optical, and thermal properties of these materials. The platform can be fabricated leveraging industry-standard silicon foundry manufacturing processes. We fully open-sourced this platform, including complete hardware design and associated software codes.

physics.optics↗

arXiv2021

Ultra-compact nonvolatile phase shifter based on electrically reprogrammable transparent phase change materials

Energy-efficient programmable photonic integrated circuits (PICs) are the cornerstone of on-chip classical and quantum optical technologies. Optical phase shifters constitute the fundamental building blocks which enable these programmable PICs. Thus far, carrier modulation and thermo-optical effect are the chosen phenomena for ultrafast and low-loss phase shifters, respectively; however, the state and information they carry are lost once the power is turned off-they are volatile. The volatility not only compromises energy efficiency due to their demand for constant power supply, but also precludes them from emerging applications such as in-memory computing. To circumvent this limitation, we introduce a novel phase shifting mechanism that exploits the nonvolatile refractive index modulation upon structural phase transition of Sb$_{2}$Se$_{3}$, a bi-stable transparent phase change material. A zero-static power and electrically-driven phase shifter was realized on a foundry-processed silicon-on-insulator platform, featuring record phase modulation up to 0.09 $\pi$/$\mu$m and a low insertion loss of 0.3 dB/$\pi$, which can be further improved upon streamlined design. We also pioneered a one-step partial amorphization scheme to enhance the speed and energy efficiency of PCM devices. A diverse cohort of programmable photonic devices were demonstrated based on the ultra-compact PCM phase shifter.

physics.optics↗

arXiv2020

Using Machine Learning to Identify the Most At-Risk Students in Physics Classes

Machine learning algorithms have recently been used to predict students' performance in an introductory physics class. The prediction model classified students as those likely to receive an A or B or students likely to receive a grade of C, D, F or withdraw from the class. Early prediction could better allow the direction of educational interventions and the allocation of educational resources. However, the performance metrics used in that study become unreliable when used to classify whether a student would receive an A, B or C (the ABC outcome) or if they would receive a D, F or withdraw (W) from the class (the DFW outcome) because the outcome is substantially unbalanced with between 10\% to 20\% of the students receiving a D, F, or W. This work presents techniques to adjust the prediction models and alternate model performance metrics more appropriate for unbalanced outcome variables. These techniques were applied to three samples drawn from introductory mechanics classes at two institutions ($N=7184$, $1683$, and $926$). Applying the same methods as the earlier study produced a classifier that was very inaccurate, classifying only 16\% of the DFW cases correctly; tuning the model increased the DFW classification accuracy to 43\%. Using a combination of institutional and in-class data improved DFW accuracy to 53\% by the second week of class. As in the prior study, demographic variables such as gender, underrepresented minority status, first-generation college student status, and low socioeconomic status were not important variables in the final prediction models.

physics.ed-ph↗

arXiv2020

Exploring the Structure of Misconceptions in the Force and Motion Conceptual Evaluation with Modified Module Analysis

Investigating student learning and understanding of conceptual physics is a primary research area within Physics Education Research (PER). Multiple quantitative methods have been employed to analyze commonly used mechanics conceptual inventories: the Force Concept Inventory (FCI) and the Force and Motion Conceptual Evaluation (FMCE). Recently, researchers have applied network analytic techniques to explore the structure of the incorrect responses to the FCI identifying communities of incorrect responses which could be mapped on to common misconceptions. In this study, the method used to analyze the FCI, Modified Module Analysis (MMA), was applied to a large sample of FMCE pretest and post-test responses ($N_{pre}=3956$, $N_{post}=3719$). The communities of incorrect responses identified were consistent with the item groups described in previous works. As in the work with the FCI, the network was simplified by only retaining nodes selected by a substantial number of students. Retaining nodes selected by 20\% of the students produced communities associated with only four misconceptions. The incorrect response communities identified for men and women were substantially different, as was the change in these communities from pretest to post-test. The 20% threshold was far more restrictive than the 4% threshold applied to the FCI in the prior work which generated similar structures. Retaining nodes selected by 5% or 10% of students generated a large number of complex communities. The communities identified at the 10\% threshold were generally associated with common misconceptions producing a far richer set of incorrect communities than the FCI; this may indicate that the FMCE is a superior instrument for characterizing the breadth of student misconceptions about Newtonian mechanics.

physics.ed-ph↗

arXiv2019

Feature2Vec: Distributional semantic modelling of human property knowledge

Feature norm datasets of human conceptual knowledge, collected in surveys of human volunteers, yield highly interpretable models of word meaning and play an important role in neurolinguistic research on semantic cognition. However, these datasets are limited in size due to practical obstacles associated with exhaustively listing properties for a large number of words. In contrast, the development of distributional modelling techniques and the availability of vast text corpora have allowed researchers to construct effective vector space models of word meaning over large lexicons. However, this comes at the cost of interpretable, human-like information about word meaning. We propose a method for mapping human property knowledge onto a distributional semantic space, which adapts the word2vec architecture to the task of modelling concept features. Our approach gives a measure of concept and feature affinity in a single semantic space, which makes for easy and efficient ranking of candidate human-derived semantic properties for arbitrary words. We compare our model with a previous approach, and show that it performs better on several evaluation tasks. Finally, we discuss how our method could be used to develop efficient sampling techniques to extend existing feature norm datasets in a reliable way.

cs.CL↗

arXiv2018

Using Sparse Semantic Embeddings Learned from Multimodal Text and Image Data to Model Human Conceptual Knowledge

Distributional models provide a convenient way to model semantics using dense embedding spaces derived from unsupervised learning algorithms. However, the dimensions of dense embedding spaces are not designed to resemble human semantic knowledge. Moreover, embeddings are often built from a single source of information (typically text data), even though neurocognitive research suggests that semantics is deeply linked to both language and perception. In this paper, we combine multimodal information from both text and image-based representations derived from state-of-the-art distributional models to produce sparse, interpretable vectors using Joint Non-Negative Sparse Embedding. Through in-depth analyses comparing these sparse models to human-derived behavioural and neuroimaging data, we demonstrate their ability to predict interpretable linguistic descriptions of human ground-truth semantic knowledge.

cs.CL↗

arXiv2012

Belief change with noisy sensing in the situation calculus

Situation calculus has been applied widely in artificial intelligence to model and reason about actions and changes in dynamic systems. Since actions carried out by agents will cause constant changes of the agents' beliefs, how to manage these changes is a very important issue. Shapiro et al. [22] is one of the studies that considered this issue. However, in this framework, the problem of noisy sensing, which often presents in real-world applications, is not considered. As a consequence, noisy sensing actions in this framework will lead to an agent facing inconsistent situation and subsequently the agent cannot proceed further. In this paper, we investigate how noisy sensing actions can be handled in iterated belief change within the situation calculus formalism. We extend the framework proposed in [22] with the capability of managing noisy sensings. We demonstrate that an agent can still detect the actual situation when the ratio of noisy sensing actions vs. accurate sensing actions is limited. We prove that our framework subsumes the iterated belief change strategy in [22] when all sensing actions are accurate. Furthermore, we prove that our framework can adequately handle belief introspection, mistaken beliefs, belief revision and belief update even with noisy sensing, as done in [22] with accurate sensing actions only.

cs.AI↗