arXiv subjects

Paulo V. Santos

Publications and source records attributed to Paulo V. Santos.

At least 19 recordsLinked to original sources

arXiv2025

Ground state exciton-polariton condensation by coherent Floquet driving

The on-demand selective population transfer between states in multilevel quantum systems is a challenging problem with implications for a wide-range of physical platforms including photon and exciton-polariton Bose- Einstein condensates (BECs). Here, we introduce an universal strategy for this selective transfer based on a strong time-periodic energy modulation, which is experimentally demonstrated by using a GHz acoustic wave to control the gain and loss of confined modes of an exciton-polariton BEC in a microcavity. The harmonic acoustic field shifts the energy of the excitonic BEC component relative to the photonic ones, which generates a dynamic population transfer within a multimode BEC that can be controlled by the acoustic amplitude. In this way, the full BEC population can be selectively transferred to the ground state to yield a single-level emission consisting of a spectral frequency comb with GHz repetition rates as well as picosecond-scale correlations. A theoretical model reproduces the observed time evolution and reveals a dynamical interplay between bosonic stimulation and the adiabatic Landau-Zener-like population transfer. Our approach provides a new avenue for the Floquet engineering of light-matter systems and enables tunable single- or multi-wavelength ultrafast pulsed laser-like emission for novel information technologies.

physics.optics↗

arXiv2025

Near-room-temperature zero-dimensional polariton lasers with sub-10 GHz linewidths

Narrow and brilliant spectral lines are essential assets for high-resolution spectroscopy as well as for precision sensing and optomechanics. In semiconductor structures and, in particular, in the well-established (Al,Ga)As material system, strong emission lines with nanosecond coherence times can be provided by the opto-electronic resonances of microcavity exciton-polariton condensates. The temporal coherence of these resonances, however, normally rapidly deteriorates as the temperature increases beyond a few tens of kelvins due to exciton dissociation. Here, we demonstrate that the temperature stability of polariton condensates in (Al,Ga)As can be significantly improved by confinement within micrometer-sized intracavity traps. We show that trapped condensates can survive up to ~200 K while maintaining a light-matter character with decoherence rates below 10 GHz (i.e., $< 40 μ$eV linewidths). These linewidths are by an order of magnitude smaller than those so far reported for other solid-state systems at these temperatures. Confinement thus provides a pathway towards room-temperature polariton condensation using the well-established (Al,Ga)As material system with prospects for application in scalable on-chip photonic devices for optical processing, sensing, and computing.

cond-mat.mtrl-sci↗

arXiv2024

Acousto-optic modulated vortex beam with tunable topological charge

Controlling the symmetry of optical and mechanical waves is pivotal to their full exploitation in technological applications and topology-linked fundamental physics experiments. Leveraging on the control of orbital angular momentum, we introduce here a device forming super-high-frequency-modulated optical vortex beams via acousto-optic interaction of light with acoustic vortices. Originated by shape-engineering of a single-contact bulk acoustic wave resonator, we generate vortices in a wide band of frequencies around 4 GHz and with frequency/geometrically tunable topological charge from 1 to 13 and beyond. With all electrical control and on-chip integration our device offers new solutions for angular-momentum-based light communication, three-dimensional particle manipulation, as well as novel interaction schemes for optomechanical devices.

physics.optics↗

arXiv2022

On-chip generation and dynamic piezo-optomechanical rotation of single photons

Integrated photonic circuits are key components for photonic quantum technologies and for the implementation of chip-based quantum devices. Future applications demand flexible architectures to overcome common limitations of many current devices, for instance the lack of tuneabilty or built-in quantum light sources. Here, we report on a dynamically reconfigurable integrated photonic circuit comprising integrated quantum dots (QDs), a Mach-Zehnder interferometer (MZI) and surface acoustic wave (SAW) transducers directly fabricated on a monolithic semiconductor platform. We demonstrate on-chip single photon generation by the QD and its sub-nanosecond dynamic on-chip control. Two independently applied SAWs piezo-optomechanically rotate the single photon in the MZI or spectrally modulate the QD emission wavelength. In the MZI, SAWs imprint a time-dependent optical phase and modulate the qubit rotation to the output superposition state. This enables dynamic single photon routing with frequencies exceeding one gigahertz. Finally, the combination of the dynamic single photon control and spectral tuning of the QD realizes wavelength multiplexing of the input photon state and demultiplexing it at the output. Our approach is scalable to multi-component integrated quantum photonic circuits and is compatible with hybrid photonic architectures and other key components for instance photonic resonators or on-chip detectors.

physics.optics↗

arXiv2022

GHz guided optomechanics in planar semiconductor microcavities

Hybrid opto, electro, and mechanical systems operating at several GHz offer extraordinary opportunities for the coherent control of opto-electronic excitations down to the quantum limit. We introduce here a monolithic platform for GHz semiconductor optomechanics based on electrically excited phonons guided along the spacer of a planar microcavity (MC) embedding quantum well (QW) emitters. The MC spacer bound by cleaved lateral facets acts as an embedded acoustic waveguide (WG) cavity with a high quality factor ($Q\sim10^5$) at frequencies well beyond 6~GHz, along which the acoustic modes live over tens of $μ$s. The strong acoustic fields and the enhanced optomechanical coupling mediated by electronic resonances induce a huge modulation of the energy (in the meV range) and strength (over 80\%) of the QW photoluminescence (PL), which, in turn, becomes a sensitive local phonon probe. Furthermore, we show the coherent coupling of acoustic modes at different sample depths, thus opening the way for phonon-mediated coherent control and interconnection of three-dimensional epitaxial nanostructures.

cond-mat.mtrl-sci↗

arXiv2021

Flying electron spin control gates

The control of "flying" (or moving) spin qubits is an important functionality for the manipulation and exchange of quantum information between remote locations on a chip. Typically, gates based on electric or magnetic fields provide the necessary perturbation for their control either globally or at well-defined locations. Here, we demonstrate the dynamic control of moving electron spins via contactless gates that move together with the spin. The concept is realized using electron spins trapped and transported by moving potential dots defined by a surface acoustic wave (SAW). The SAW strain at the electron trapping site, which is set by the SAW amplitude, acts as a contactless, tunable gate that controls the precession frequency of the flying spins via the spin-orbit interaction. We show that the degree of precession control in moving dots exceeds previously reported results for unconstrained transport by an order of magnitude and is well accounted for by a theoretical model for the strain contribution to the spin-orbit interaction. This flying spin gate permits the realization of an acoustically driven optical polarization modulator based on electron spin transport, a key element for on-chip spin information processing with a photonic interface.

cond-mat.mes-hall↗

arXiv2021

Atomic force microscopy calibration of standing surface acoustic wave amplitudes

Atomic force microscopy is an important tool for characterizing surface acoustic waves, in particular for high frequencies, where the wavelength is too short to be resolved by laser interferometry. A caveat is, that the cantilever deflection is not equal to the amplitude of the surface acoustic wave. We show, that the energy transfer from the moving surface to the cantilever instead leads to a deflection exceeding the surface modulation. We present a method for an accurate calibration of surface acoustic wave amplitudes based on comparing force-curve measurements with the equation of motion of a driven cantilever. We demonstrate our method for a standing surface acoustic wave on a GaAs crystal confined in a focusing cavity with a resonance frequency near 3 GHz.

cond-mat.mes-hall↗

arXiv2020

Electrically driven exciton-polariton optomechanics at super high frequencies

Polaritons enable the resonant coupling of excitons and photons to vibrations in the application-relevant super high frequency (SHF, 3-30 GHz) domain. We introduce a novel platform for coherent optomechanics based on the coupling of exciton-polaritons and electrically driven SHF longitudinal acoustic phonons confined within the spacer region of a planar Bragg microcavity. An intrinsic property of the microcavity platform is the back-feeding of phonons via reflections at the sample boundaries, which enables frequency x quality factors products exceeding 10^14 Hz as well as huge modulation amplitudes of the optical transition energies (up to 8 meV). We show that the modulation is dominated by the phonon-induced energy shifts of the excitonic polariton component, thus leading to an oscillatory transition between the regimes of weak and strong light-matter coupling. These results open the way for polariton-based coherent optomechanics in the non-adiabatic, side-band-resolved regime of coherent control.

physics.app-ph↗

arXiv2020

Dynamically Tuned Arrays of Polariton Parametric Oscillators

Optical parametric oscillations (OPOs) - a non-linear process involving the coherent coupling of an optically excited two particle pump state to a signal and an idler states with different energies - is a relevant mechanism for optical amplification as well as for the generation of correlated photons. OPOs require states with well-defined symmetries and energies: the fine-tuning of material properties and structural dimensions to create these states remains a challenge for the realization of scalable OPO-based functionalities in semiconductor nanostructures. Here, we demonstrate a pathway towards this goal based on the control of confined microcavity exciton-polaritons modulated by the spatially and time varying dynamical potentials produced by a surface acoustic waves (SAW). The exciton-polariton are confined in um-sized intra-cavity traps fabricated by structuring a planar semiconductor microcavity during the epitaxial growth process. OPOs in these structures benefit from the enhanced non-linearities of confined systems. We show that SAW fields induce state-dependent and time-varying energy shifts, which enable the energy alignment of the confined levels with the appropriate symmetry for OPO triggering. Furthermore, the dynamic acoustic tuning, which is fully described by a theoretical model for the modulation of the confined polaritons by the acoustic field, compensates for fluctuations in symmetry and dimensions of the confinement potential thus enabling a variety of dynamic OPO regimes. The robustness of the acoustic tuning is demonstrated by the synchronous excitation of an array of confined OPOs using a single acoustic beam, thus opening the way for the realization of scalable non-linear on-chip systems.

cond-mat.other↗

arXiv2019

Focusing Surface Acoustic Wave Microcavities on GaAs

Focusing microcavities for surface acoustic waves (SAWs) produce highly localized strain and piezoelectric fields that can dynamically control excitations in nanostructures. Focusing transducers (FIDTs) that generate SAW beams which match nanostructure dimensions require pattern correction due to diffraction and wave velocity anisotropy. The anisotropy correction is normally implemented by adding a quadratic term to the dependence of the wave velocity on propagation angle. We show that SAW focusing to diffraction limited sizes in GaAs requires corrections that more closely follow the group velocity wavefront, which is not a quadratic function. Optical interferometric mapping of the resultant SAW displacement field reveals tightly focused SAW beams on GaAs with a minimal beam waist. An additional set of Gouy phase-corrected passive fingers creates an acoustic microcavity in the focal region with small volume and high quality factor. Our $λ_\mathrm{SAW} = 5.6~μ$m FIDTs are expected to scale well to the $\approx $ 500~nm wavelengths regime needed to study strong coupling between vibrations and electrons in electrostatic GaAs quantum dots.

physics.app-ph↗

arXiv2019

Dynamic local strain in graphene generated by surface acoustic waves

We experimentally demonstrate that the Raman active optical phonon modes of single layer graphene can be modulated by the dynamic local strain created by surface acoustic waves (SAWs). In particular, the dynamic strain field of the SAW is shown to induce a Raman scattering intensity variation as large as 15% and a phonon frequency shift of up to 10 cm$^{-1}$ for the G band, for instance, for an effective hydrostatic strain of 0.24% generated in a single layer graphene atop a LiNbO$_{3}$ piezoelectric substrate with a SAW resonator operating at a frequency of $ \sim $ 400 MHz. Thus, we demonstrate that SAWs are powerful tools to modulate the optical and vibrational properties of supported graphene by means of the high-frequency localized deformations tailored by the acoustic transducers, which can also be extended to other 2D systems.

cond-mat.mes-hall↗

arXiv2019

Sound-driven single-electron transfer in a circuit of coupled quantum rails

Surface acoustic waves (SAWs) strongly modulate the shallow electric potential in piezoelectric materials. In semiconductor heterostructures such as GaAs/AlGaAs, SAWs can thus be employed to transfer individual electrons between distant quantum dots. This transfer mechanism makes SAW technologies a promising candidate to convey quantum information through a circuit of quantum logic gates. Here we present two essential building blocks of such a SAW-driven quantum circuit. First, we implement a directional coupler allowing to partition a flying electron arbitrarily into two paths of transportation. Second, we demonstrate a triggered single-electron source enabling synchronisation of the SAW-driven sending process. Exceeding a single-shot transfer efficiency of 99 %, we show that a SAW-driven integrated circuit is feasible with single electrons on a large scale. Our results pave the way to perform quantum logic operations with flying electron qubits.

cond-mat.mes-hall↗

arXiv2019

Generation and propagation of super-high-frequency bulk acoustic wave in GaAs

Coherent super-high-frequency (SHF) vibrations provide an excellent tool for the modulation and control of excitations in semiconductors. Here, we investigate the piezoelectric generation and propagation of longitudinal bulk acoustic waves (LBAWs) with frequencies up to 20 GHz in GaAs crystals using bulk acoustic wave resonators (BAWRs) based on piezoelectric thin ZnO films. We show that the electro-acoustic conversion efficiency of the BAWRs depends sensitively on the sputtering conditions of the ZnO films. The BAWRs were then used for the study of the propagation properties of the LBAWs in GaAs in the frequency and temperature ranges from 1 to 20 GHz and 10 and 300 K, respectively, which have so far not been experimentally accessed. We found that the intrinsic acoustic absorption of GaAs in the temperature range from 80 K to 300 K is dominated by scattering with thermal phonons. At lower temperatures, in contrast, the intrinsic acoustic absorption saturates at a frequency-dependent value. Experiments carried out with different propagation lengths indicate that the saturation is associated with losses during reflection at the sample boundaries. We also demonstrate devices with high quality factor fabricated on top of acoustic Bragg-reflectors. The results presented here prove the feasibility of high-quality acoustic resonators embedding GaAs-based nanostructures, thus opening the way for the modulation and control of their properties by electrically excited SHF LBAWs.

cond-mat.mtrl-sci↗

arXiv2019

Sidewall quantum wires on GaAs(001) substrates

We study the structural, optical, and transport properties of sidewall quantum wires on GaAs(001) substrates. The QWRs are grown by molecular beam epitaxy (MBE) on GaAs(001) substrates prepatterned with shallow ridges. They form as a consequence of material accumulation on the sidewalls of the ridges during the overgrowth of a quantum well (QW) on the patterned surface. The QWRs are approximately 200 nm-wide and have emission energies red-shifted by 27meV with respect to the surrounding QW. Spatially resolved spectroscopic photoluminencence studies indicate that the QW thickness reduces around the QWRs, thus creating a 4 meV energy barrier for the transfer of carriers from the QW to the QWR. We show that the QWRs act as efficient channels for the transport of optically excited electrons and holes over tens of μm by a high-frequency surface acoustic wave (SAW). These results demonstrate the feasibility of efficient ambipolar transport in QWRs with sub-micrometer dimensions, photolithographically defined on GaAs substrates.

cond-mat.mes-hall↗

arXiv2018

Optical waveguide devices modulated by surface acoustic waves

This paper reviews the application of coherent acoustic phonons in the form of piezoelectrically-generated surface acoustic waves to control the response of integrated photonic acousto-optic waveguide structures. We first address the fundamental properties of the acoustic fields in piezoelectric materials as well as the piezoelectric generation of surface acoustic waves using interdigital transducers. The mechanism responsible for the interaction between light and the acoustic modes in the photonic waveguide structures and the modulation of the response of the devices is carefully reviewed. Next, we discuss the most important developments in the field of integrated acousto-optical device applications, with focus on devices built upon three-dimensional optical waveguides. Finally, prospects for acousto-optic device applications by use of surface acoustic waves are summarized.

physics.app-ph↗

arXiv2018

Acousto-electric transport in MgO/ZnO-covered graphene on SiC

We investigate the acousto-electric transport induced by surface acoustic waves (SAWs) in epitaxial graphene (EG) coated by a MgO/ZnO film. The deposition of a thin MgO layer protects the EG during the sputtering of a piezoelectric ZnO film for the efficient generation of SAWs. We demonstrate by Raman and electric measurements that the coating does not harm the EG structural and electronic properties. We report the generation of two SAW modes with frequencies around 2 GHz. For both modes, we measure acousto-electric currents in EG devices placed in the SAW propagation path. The currents increase linearly with the SAW power, reaching values up to almost two orders of magnitude higher than in previous reports for acousto-electric transport in EG on SiC. Our results agree with the predictions from the classical relaxation model of the interaction between SAWs and a two dimensional electron gas.

cond-mat.mes-hall↗

arXiv2018

Quantum confinement of exciton-polaritons in a structured (Al,Ga)As microcavity

The realization of quantum functionalities with polaritons in an all-semiconductor platform requires the control of the energy and spatial overlap of the wave functions of single polaritons trapped in potentials with precisely controlled shape and size. In this study, we reach the confinement of microcavity polaritons in traps with an effective potential width down to 1 um, produced by patterning the active region of the (Al,Ga)As microcavity between two molecular beam epitaxy growth runs. We correlate spectroscopic and structural data to show that the smooth surface relief of the patterned traps translates into a graded confinement-potential characterized by lateral interfaces with a finite lateral-width. We show that the structuring method is suitable for the fabrication of arrays of proximal traps, supporting hybridization between adjacent lattice sites.

physics.app-ph↗

arXiv2016

Vertically-coupled dipolar exciton molecules

While the interaction potential between two dipoles residing in a single plane is repulsive, in a system of two vertically adjacent layers of dipoles it changes from repulsive interaction in the long range to attractive interaction in the short range. Here we show that for dipolar excitons in semiconductor heterostructures, such a potential may give rise to bound states if two such excitons are excited in two separate layers, leading to the formation of vertically coupled dipolar exciton molecules. Our calculations prove the existence of such bound states and predict their binding energy as a function of the layers separation as well as their thermal distributions. We show that these molecules should be observed in realistic systems such as semiconductor coupled quantum well structures and the more recent van-der-Waals bound heterostructures. Formation of such molecules can lead to new effects such as a collective dipolar drag between layers and new forms of multi-particle correlations, as well as to the study of dipolar molecular dynamics in a controlled system.

cond-mat.quant-gas↗