arXiv subjects

Pengyu Chen

Publications and source records attributed to Pengyu Chen.

At least 37 records · Page 2Linked to original sources

arXiv2025

CoDrone: Autonomous Drone Navigation Assisted by Edge and Cloud Foundation Models

Autonomous navigation for Unmanned Aerial Vehicles faces key challenges from limited onboard computational resources, which restrict deployed deep neural networks to shallow architectures incapable of handling complex environments. Offloading tasks to remote edge servers introduces high latency, creating an inherent trade-off in system design. To address these limitations, we propose CoDrone - the first cloud-edge-end collaborative computing framework integrating foundation models into autonomous UAV cruising scenarios - effectively leveraging foundation models to enhance performance of resource-constrained unmanned aerial vehicle platforms. To reduce onboard computation and data transmission overhead, CoDrone employs grayscale imagery for the navigation model. When enhanced environmental perception is required, CoDrone leverages the edge-assisted foundation model Depth Anything V2 for depth estimation and introduces a novel one-dimensional occupancy grid-based navigation method - enabling fine-grained scene understanding while advancing efficiency and representational simplicity of autonomous navigation. A key component of CoDrone is a Deep Reinforcement Learning-based neural scheduler that seamlessly integrates depth estimation with autonomous navigation decisions, enabling real-time adaptation to dynamic environments. Furthermore, the framework introduces a UAV-specific vision language interaction module incorporating domain-tailored low-level flight primitives to enable effective interaction between the cloud foundation model and the UAV. The introduction of VLM enhances open-set reasoning capabilities in complex unseen scenarios. Experimental results show CoDrone outperforms baseline methods under varying flight speeds and network conditions, achieving a 40% increase in average flight distance and a 5% improvement in average Quality of Navigation.

cs.RO↗

arXiv2025

Subcellular Metabolic Tracking Using Fluorescent Nanodiamonds Relaxometry

Fluorescent nanodiamonds (FNDs) relaxometry holds promising future for advancement of high spatiotemporal resolution metabolic imaging technology. In this study, we demonstrate a simultaneous integration of spatial position tracking with FND relaxometry to characterize the temporal dynamics of metabolic processes, thereby enhancing the capability to monitor cellular activities over time. To enable targeted metabolic probing in living cells, FNDs were surface-functionalized to achieve specific localization within key organelles, including the nucleus and mitochondria. This strategy not only facilitates subcellular-level metabolic monitoring but also allows for direct comparison between intra- and extranuclear microenvironments within the same living cell, offering substantial potential for elucidating the spatial and functional heterogeneity of cellular metabolism.

physics.bio-ph↗

arXiv2025

Where are GIScience Faculty Hired from? Analyzing Faculty Mobility and Research Themes Through Hiring Networks

Academia is profoundly influenced by faculty hiring networks, which serve as critical conduits for knowledge dissemination and the formation of collaborative research initiatives. While extensive research in various disciplines has revealed the institutional hierarchies inherent in these networks, their impacts within GIScience remain underexplored. To fill this gap, this study analyzes the placement patterns of 946 GIScience faculty worldwide by mapping the connections between PhD-granting institutions and current faculty affiliations. Our dataset, which is compiled from volunteer-contributed information, is the most comprehensive collection available in this field. While there may be some limitations in its representativeness, its scope and depth provide a unique and valuable perspective on the global placement patterns of GIScience faculty. Our analysis reveals several influential programs in placing GIScience faculty, with hiring concentrated in the western countries. We examined the diversity index to assess the representation of regions and institutions within the global GIScience faculty network. We observe significant internal retention at both the continental and country levels, and a high level of non-self-hired ratio at the institutional level. Over time, research themes have also evolved, with growing research clusters emphasis on spatial data analytics, cartography and geovisualization, geocomputation, and environmental sciences, etc. These results illuminate the influence of hiring practices on global knowledge dissemination and contribute to promoting academic equity within GIScience and Geography.

cs.HC↗

arXiv2025

Pushing the Limits of Safety: A Technical Report on the ATLAS Challenge 2025

Multimodal Large Language Models (MLLMs) have enabled transformative advancements across diverse applications but remain susceptible to safety threats, especially jailbreak attacks that induce harmful outputs. To systematically evaluate and improve their safety, we organized the Adversarial Testing & Large-model Alignment Safety Grand Challenge (ATLAS) 2025}. This technical report presents findings from the competition, which involved 86 teams testing MLLM vulnerabilities via adversarial image-text attacks in two phases: white-box and black-box evaluations. The competition results highlight ongoing challenges in securing MLLMs and provide valuable guidance for developing stronger defense mechanisms. The challenge establishes new benchmarks for MLLM safety evaluation and lays groundwork for advancing safer multimodal AI systems. The code and data for this challenge are openly available at https://github.com/NY1024/ATLAS_Challenge_2025.

cs.CR↗

arXiv2025

Towards Efficient Random-Order Enumeration for Join Queries

In many data analysis pipelines, a basic and time-consuming process is to produce join results and feed them into downstream tasks. Numerous enumeration algorithms have been developed for this purpose. To be a statistically meaningful representation of the whole join result, the result tuples are required to be enumerated in uniformly random order. However, existing studies lack an efficient random-order enumeration algorithm with a worst-case runtime guarantee for (cyclic) join queries. In this paper, we study the problem of enumerating the results of a join query in random order. We develop an efficient random-order enumeration algorithm for join queries with no large hidden constants in its complexity, achieving expected $O(\frac{\mathrm{AGM}(Q)}{|Res(Q)|}\log^2|Q|)$ delay, $O(\mathrm{AGM}(Q)\log|Q|)$ total running time after $O(|Q|\log|Q|)$-time index construction, where $|Q|$ is the size of input, $\mathrm{AGM}(Q)$ is the AGM bound, and $|Res(Q)|$ is the size of the join result. We prove that our algorithm is near-optimal in the worst case, under the combinatorial $k$-clique hypothesis. Our algorithm requires no query-specific preprocessing and can be flexibly adapted to many common database indexes with only minor modifications. We also devise two non-trivial techniques to speed up the enumeration, and provide an experimental study on our enumeration algorithm along with the speed-up techniques. The experimental results show that our algorithm, enhanced with the proposed techniques, significantly outperforms existing state-of-the-art methods.

cs.DB↗

arXiv2025

Accurate and efficient predictions of keyhole dynamics in laser materials processing using machine learning-aided simulations

The keyhole phenomenon has been widely observed in laser materials processing, including laser welding, remelting, cladding, drilling, and additive manufacturing. Keyhole-induced defects, primarily pores, dramatically affect the performance of final products, impeding the broad use of these laser-based technologies. The formation of these pores is typically associated with the dynamic behavior of the keyhole. So far, the accurate characterization and prediction of keyhole features, particularly keyhole depth, as a function of time, has been a challenging task. In situ characterization of keyhole dynamic behavior using the synchrotron X-ray technique is informative but complicated and expensive. Current simulations are generally hindered by their poor accuracy and generalization abilities in predicting keyhole depths due to the lack of accurate laser absorptance data. In this study, we develop a machine learning-aided simulation method that accurately predicts keyhole dynamics, especially in keyhole depth fluctuations, over a wide range of processing parameters. In two case studies involving titanium and aluminum alloys, we achieve keyhole depth prediction with a mean absolute percentage error of 10%, surpassing those simulated using the ray-tracing method with an error margin of 30%, while also reducing computational time. This exceptional fidelity and efficiency empower our model to serve as a cost-effective alternative to synchrotron experiments. Our machine learning-aided simulation method is affordable and readily deployable for a large variety of materials, opening new doors to eliminate or reduce defects for a wide range of laser materials processing techniques.

cond-mat.mtrl-sci↗

arXiv2025

GDSG: Graph Diffusion-based Solution Generator for Optimization Problems in MEC Networks

Optimization is crucial for MEC networks to function efficiently and reliably, most of which are NP-hard and lack efficient approximation algorithms. This leads to a paucity of optimal solution, constraining the effectiveness of conventional deep learning approaches. Most existing learning-based methods necessitate extensive optimal data and fail to exploit the potential benefits of suboptimal data that can be obtained with greater efficiency and effectiveness. Taking the multi-server multi-user computation offloading (MSCO) problem, which is widely observed in systems like Internet-of-Vehicles (IoV) and Unmanned Aerial Vehicle (UAV) networks, as a concrete scenario, we present a Graph Diffusion-based Solution Generation (GDSG) method. This approach is designed to work with suboptimal datasets while converging to the optimal solution large probably. We transform the optimization issue into distribution-learning and offer a clear explanation of learning from suboptimal training datasets. We build GDSG as a multi-task diffusion model utilizing a Graph Neural Network (GNN) to acquire the distribution of high-quality solutions. We use a simple and efficient heuristic approach to obtain a sufficient amount of training data composed entirely of suboptimal solutions. In our implementation, we enhance the backbone GNN and achieve improved generalization. GDSG also reaches nearly 100\% task orthogonality, ensuring no interference between the discrete and continuous generation tasks. We further reveal that this orthogonality arises from the diffusion-related training loss, rather than the neural network architecture itself. The experiments demonstrate that GDSG surpasses other benchmark methods on both the optimal and suboptimal training datasets. The MSCO datasets has open-sourced at this http URL, as well as the GDSG algorithm codes at https://github.com/qiyu3816/GDSG.

cs.NI↗

arXiv2025

A GAN-Enhanced Deep Learning Framework for Rooftop Detection from Historical Aerial Imagery

Precise detection of rooftops from historical aerial imagery is essential for analyzing long-term urban development and human settlement patterns. Nonetheless, black-and-white analog photographs present considerable challenges for modern object detection frameworks due to their limited spatial resolution, absence of color information, and archival degradation. To address these challenges, this research introduces a two-stage image enhancement pipeline based on Generative Adversarial Networks (GANs): image colorization utilizing DeOldify, followed by super-resolution enhancement with Real-ESRGAN. The enhanced images were subsequently employed to train and evaluate rooftop detection models, including Faster R-CNN, DETReg, and YOLOv11n. The results demonstrate that the combination of colorization with super-resolution significantly enhances detection performance, with YOLOv11n achieving a mean Average Precision (mAP) exceeding 85\%. This signifies an enhancement of approximately 40\% over the original black-and-white images and 20\% over images enhanced solely through colorization. The proposed method effectively bridges the gap between archival imagery and contemporary deep learning techniques, facilitating more reliable extraction of building footprints from historical aerial photographs. Code and resources for reproducing our results are publicly available at \href{https://github.com/Pengyu-gis/Historical-Aerial-Photos}{github.com/Pengyu-gis/Historical-Aerial-Photos}.

cs.CV↗

arXiv2025

InterSliceBoost: Identifying Tissue Layers in Three-dimensional Ultrasound Images for Chronic Lower Back Pain (cLBP) Assessment

Available studies on chronic lower back pain (cLBP) typically focus on one or a few specific tissues rather than conducting a comprehensive layer-by-layer analysis. Since three-dimensional (3-D) images often contain hundreds of slices, manual annotation of these anatomical structures is both time-consuming and error-prone. We aim to develop and validate a novel approach called InterSliceBoost to enable the training of a segmentation model on a partially annotated dataset without compromising segmentation performance. The architecture of InterSliceBoost includes two components: an inter-slice generator and a segmentation model. The generator utilizes residual block-based encoders to extract features from adjacent image-mask pairs (IMPs). Differential features are calculated and input into a decoder to generate inter-slice IMPs. The segmentation model is trained on partially annotated datasets (e.g., skipping 1, 2, 3, or 7 images) and the generated inter-slice IMPs. To validate the performance of InterSliceBoost, we utilized a dataset of 76 B-mode ultrasound scans acquired on 29 subjects enrolled in an ongoing cLBP study. InterSliceBoost, trained on only 33% of the image slices, achieved a mean Dice coefficient of 80.84% across all six layers on the independent test set, with Dice coefficients of 73.48%, 61.11%, 81.87%, 95.74%, 83.52% and 88.74% for segmenting dermis, superficial fat, superficial fascial membrane, deep fat, deep fascial membrane, and muscle. This performance is significantly higher than the conventional model trained on fully annotated images (p<0.05). InterSliceBoost can effectively segment the six tissue layers depicted on 3-D B-model ultrasound images in settings with partial annotations.

eess.IV↗

arXiv2025

Diffusion Models as Network Optimizers: Explorations and Analysis

Network optimization is a fundamental challenge in the Internet of Things (IoT) network, often characterized by complex features that make it difficult to solve these problems. Recently, generative diffusion models (GDMs) have emerged as a promising new approach to network optimization, with the potential to directly address these optimization problems. However, the application of GDMs in this field is still in its early stages, and there is a noticeable lack of theoretical research and empirical findings. In this study, we first explore the intrinsic characteristics of generative models. Next, we provide a concise theoretical proof and intuitive demonstration of the advantages of generative models over discriminative models in network optimization. Based on this exploration, we implement GDMs as optimizers aimed at learning high-quality solution distributions for given inputs, sampling from these distributions during inference to approximate or achieve optimal solutions. Specifically, we utilize denoising diffusion probabilistic models (DDPMs) and employ a classifier-free guidance mechanism to manage conditional guidance based on input parameters. We conduct extensive experiments across three challenging network optimization problems. By investigating various model configurations and the principles of GDMs as optimizers, we demonstrate the ability to overcome prediction errors and validate the convergence of generated solutions to optimal solutions. We provide code and data at https://github.com/qiyu3816/DiffSG.

cs.LG↗

arXiv2024

Penalty-based Methods for Simple Bilevel Optimization under Hölderian Error Bounds

This paper investigates simple bilevel optimization problems where we minimize an upper-level objective over the optimal solution set of a convex lower-level objective. Existing methods for such problems either only guarantee asymptotic convergence, have slow sublinear rates, or require strong assumptions. To address these challenges, we propose a penalization framework that delineates the relationship between approximate solutions of the original problem and its reformulated counterparts. This framework accommodates varying assumptions regarding smoothness and convexity, enabling the application of specific methods with different complexity results. Specifically, when both upper- and lower-level objectives are composite convex functions, under an $α$-H{ö}lderian error bound condition and certain mild assumptions, our algorithm attains an $(ε,ε^β)$-optimal solution of the original problem for any $β> 0$ within $\mathcal{O}\left(\sqrt{{1}/{ε^{\max\{α,β\}}}}\right)$ iterations. The result can be improved further if the smooth part of the upper-level objective is strongly convex. We also establish complexity results when the upper- and lower-level objectives are general nonsmooth functions. Numerical experiments demonstrate the effectiveness of our algorithms.

math.OC↗

arXiv2024

Zwitterionic Polymer Coatings with Compositional Gradient for Stable and Substrate-Independent Biofouling Deterrence via All-Dry Synthesis

Biofouling represents a critical challenge in marine transportation, healthcare, and food manufacturing, among other industries, as it promotes contamination and increases maintenance costs. Zwitterionic polymers, known for their exceptional antifouling properties, offer a promising solution for biofouling deterrence. Despite the rapid development of zwitterionic polymers in recent years, the design rules, especially concerning the choice of cationic moieties to optimize biofouling deterrence, remain elusive. In this study, we leveraged a versatile all-dry synthesis scheme to achieve a selection of 9 zwitterionic polymers, 5 of which are unprecedented for this synthesis paradigm, thus systematically unraveling that molecular design rule. Notably, we developed a synthesis strategy to enable nanoscale compositional gradient along the coating cross-section, which ensures the robustness of the zwitterionic polymer coatings irrespective of the choice of cation-anion combinations. That robustness is enabled by an organosilicon-based layer at the coating-substrate interface, which simultaneously enhances coating adhesion and chemical stability while ensuring high concentration of zwitterionic moieties at the polymer-liquid interface to maximize biofouling deterrence. The antifouling efficacy was assessed using biofilms of Pseudomonas aeruginosa or Bacillus subtilis. All coatings demonstrated antifouling efficacy, with a novel zwitterionic polymer comprising a combination of imidazolium and carboxyl groups achieving the greatest antibiofilm effects, which we attributed to the strong hydration. This study highlights the coating architecture, i.e., one with nanoscale gradient and varying crosslinking densities, as a valid strategy to render zwitterionic polymers robust coatings and the imidazolium-based carboxybetaine as a promising next-generation antibiofouling chemistry.

physics.chem-ph↗

arXiv2024

A Novel Aerial-Aquatic Locomotion Robot with Variable Stiffness Propulsion Module

In recent years, the development of robots capable of operating in both aerial and aquatic environments has gained significant attention. This study presents the design and fabrication of a novel aerial-aquatic locomotion robot (AALR). Inspired by the diving beetle, the AALR incorporates a biomimetic propulsion mechanism with power and recovery strokes. The variable stiffness propulsion module (VSPM) uses low melting point alloy (LMPA) and variable stiffness joints (VSJ) to achieve efficient aquatic locomotion while reduce harm to marine life. The AALR's innovative design integrates the VSPM into the arms of a traditional quadrotor, allowing for effective aerial-aquatic locomotion. The VSPM adjusts joint stiffness through temperature control, meeting locomotion requirements in both aerial and aquatic modes. A dynamic model for the VSPM was developed, with optimized dimensional parameters to increase propulsion force. Experiments focused on aquatic mode analysis and demonstrated the AALR's swimming capability, achieving a maximum swimming speed of 77 mm/s underwater. The results confirm the AALR's effective performance in water environment, highlighting its potential for versatile, eco-friendly operations.

cs.RO↗

arXiv2024

Data Debugging is NP-hard for Classifiers Trained with SGD

Data debugging is to find a subset of the training data such that the model obtained by retraining on the subset has a better accuracy. A bunch of heuristic approaches are proposed, however, none of them are guaranteed to solve this problem effectively. This leaves an open issue whether there exists an efficient algorithm to find the subset such that the model obtained by retraining on it has a better accuracy. To answer this open question and provide theoretical basis for further study on developing better algorithms for data debugging, we investigate the computational complexity of the problem named Debuggable. Given a machine learning model $\mathcal{M}$ obtained by training on dataset $D$ and a test instance $(\mathbf{x}_\text{test},y_\text{test})$ where $\mathcal{M}(\mathbf{x}_\text{test})\neq y_\text{test}$, Debuggable is to determine whether there exists a subset $D^\prime$ of $D$ such that the model $\mathcal{M}^\prime$ obtained by retraining on $D^\prime$ satisfies $\mathcal{M}^\prime(\mathbf{x}_\text{test})=y_\text{test}$. To cover a wide range of commonly used models, we take SGD-trained linear classifier as the model and derive the following main results. (1) If the loss function and the dimension of the model are not fixed, Debuggable is NP-complete regardless of the training order in which all the training samples are processed during SGD. (2) For hinge-like loss functions, a comprehensive analysis on the computational complexity of Debuggable is provided; (3) If the loss function is a linear function, Debuggable can be solved in linear time, that is, data debugging can be solved easily in this case. These results not only highlight the limitations of current approaches but also offer new insights into data debugging.

cs.CC↗

arXiv2023

Random-Order Enumeration for Self-Reducible NP-Problems

In plenty of data analysis tasks, a basic and time-consuming process is to produce a large number of solutions and feed them into downstream processing. Various enumeration algorithms have been developed for this purpose. An enumeration algorithm produces all solutions of a problem instance without repetition. To be a statistically meaningful representation of the solution space, solutions are required to be enumerated in uniformly random order. This paper studies a set of self-reducible NP-problems in three hierarchies, where the problems are polynomially countable ($Sr_{NP}^{FP}$), admit FPTAS ($Sr_{NP}^{FPTAS}$), and admit FPRAS ($Sr_{NP}^{FPRAS}$), respectively. The trivial algorithm based on a (almost) uniform generator is in fact inefficient. We provide a new insight that the (almost) uniform generator is not the end of the story. More efficient algorithmic frameworks are proposed to enumerate solutions in uniformly random order for problems in these three hierarchies. (1) For problems in $Sr_{NP}^{FP}$, we show a random-order enumeration algorithm with polynomial delay (PDREnum); (2) For problems in $Sr_{NP}^{FPTAS}$, we show a Las Vegas random-order enumeration algorithm with expected polynomial delay (PDLVREnum); (3) For problems in $Sr_{NP}^{FPRAS}$, we devise a fully polynomial delay Atlantic City random-order enumeration algorithm with expected delay polynomial in the input size and the given error probability $δ$ (FPACREnum), which has a probability of at least $1-δ$ becoming a Las Vegas random-order enumeration algorithm. Finally, to further improve the efficiency of the random-order enumeration algorithms, based on the master/slave paradigm, we present a parallelization with 1.5-optimal enumeration delay and running time, along with the theoretical analysis.

cs.DS↗

arXiv2022

3rd Place Scheme on Instance Segmentation Track of ICCV 2021 VIPriors Challenges

In this paper, we introduce a data-efficient instance segmentation method we used in the 2021 VIPriors Instance Segmentation Challenge. Our solution is a modified version of Swin Transformer, based on the mmdetection which is a powerful toolbox. To solve the problem of lack of data, we utilize data augmentation including random flip and multiscale training to train our model. During inference, multiscale fusion is used to boost the performance. We only use a single GPU during the whole training and testing stages. In the end, our team achieved the result of 0.366 for AP@0.50:0.95 on the test set, which is competitive with other top-ranking methods while only one GPU is used. Besides, our method achieved the AP@0.50:0.95 (medium) of 0.592, which ranks second among all contestants. In the end, our team ranked third among all the contestants, as announced by the organizers.

cs.CV↗

arXiv2022

MAFNet: A Multi-Attention Fusion Network for RGB-T Crowd Counting

RGB-Thermal (RGB-T) crowd counting is a challenging task, which uses thermal images as complementary information to RGB images to deal with the decreased performance of unimodal RGB-based methods in scenes with low-illumination or similar backgrounds. Most existing methods propose well-designed structures for cross-modal fusion in RGB-T crowd counting. However, these methods have difficulty in encoding cross-modal contextual semantic information in RGB-T image pairs. Considering the aforementioned problem, we propose a two-stream RGB-T crowd counting network called Multi-Attention Fusion Network (MAFNet), which aims to fully capture long-range contextual information from the RGB and thermal modalities based on the attention mechanism. Specifically, in the encoder part, a Multi-Attention Fusion (MAF) module is embedded into different stages of the two modality-specific branches for cross-modal fusion at the global level. In addition, a Multi-modal Multi-scale Aggregation (MMA) regression head is introduced to make full use of the multi-scale and contextual information across modalities to generate high-quality crowd density maps. Extensive experiments on two popular datasets show that the proposed MAFNet is effective for RGB-T crowd counting and achieves the state-of-the-art performance.

cs.CV↗

arXiv2021

Asymptotic behavior of time periodic solutions for extended Fisher-Kolmogorov equations with delays

In this paper, we investigate the global existence, uniqueness and asymptotic stability of time $ω$-periodic classical solution for a class of extended Fisher-Kolmogorov equations with delays and general nonlinear term. We establish a general framework to find time $ω$-periodic solutions for nonlinear extended Fisher-Kolmogorov equations with delays and general nonlinear function, which will provide an effective way to deal with such kinds of problems. The discussion is based on the theory of compact and analytic operator semigroups and maximal regularization method.

math.AP↗