arXiv subjects

Peter Fischer

Publications and source records attributed to Peter Fischer.

At least 19 recordsLinked to original sources

arXiv2026

Spectacular - A Modular DAQ System for Microdosimetry

Particle therapy using light ions like protons, helium ions or carbon ions enables precise tumor targeting with enhanced biological effectiveness while minimizing damage to healthy tissue. Successful treatment planning depends not only on the absorbed dose but also on quality of the radiation, as quantified by the linear energy transfer (LET). Microdosimetry provides a direct experimental determination of such quantities by measuring the energy deposited per incoming particle in micrometer-sized solid-state detectors representing the relevant biological scales. However, the small signal amplitudes and high particle rates in therapeutic ion beams challenge existing readout systems, which are not sufficiently optimized for reliable operation with respect to pileup and signal-to-noise ratio (SNR). To address this, a modular data acquisition (DAQ) system was developed to accelerate the design of custom readout electronics and sensor characterization in microdosimetry and related spectroscopic applications. Centered around a Xilinx Zynq system-on-chip, it combines real-time processing, high-bandwidth streaming, and high-resolution digitization (16 bit at 100 MSas$^{-1}$) to enable advanced digital signal processing. The platform integrates programmable power supplies, a bias-voltage filter, test-pulse generators, and flexible I/O. Detector and preamplifier front-ends are hosted on interchangeable daugtherboards connected via a standardized interface, allowing different hardware configurations and readout algorithms to be evaluated on the same platform. The Spectacular DAQ system was successfully tested at the MedAustron ion therapy facility with custom charge-sensitive amplifiers and a diamond microdosimeter. First results demonstrate the feasibility and provide a proof-of-concept for potential future applications in clinical practice.

physics.ins-det↗

arXiv2026

Generation of Bloch Points with Controlled Spin Texture Using Geometrical Boundary Conditions

Bloch points are three-dimensional topological singularities in magnetization that play a key role in topological transformations of spin textures, such as skyrmion creation or annihilation. While topology often enforces the existence of Bloch points in confined geometries like cylindrical nanowires, deterministic control over their position and magnetic configuration remains challenging. Here we demonstrate the generation of Bloch points with controlled spin texture by engineering geometrical boundary conditions in three-dimensional nanomagnets. By introducing a chirality interface between two three-dimensional double-helix nanowires of opposite handedness, forming a kinked, non-collinear structure, we impose competing topological constraints that uniquely define the magnetization configuration surrounding the Bloch point. A saturating magnetic field nucleates head-to-head or tail-to-tail domain configurations at the chirality interface, producing a Bloch-point domain wall with deterministic polarity, circulation and helicity. This geometrical approach enables full three-dimensional control of Bloch point domain walls allowing deterministic engineering of their spin texture and its selective coupling to current-induced Oersted fields.

cond-mat.mes-hall↗

arXiv2026

Thermo-Rheological Memory of $\kappa$-Carrageenan Fluid Gels Formed Under Flow

Fluid gels are soft materials formed by shearing biopolymer solutions during the sol-gel transition. Their ability to yield and flow beyond a critical stress makes them attractive for designing versatile, biocompatible materials in food, health care and medical applications. Although it is well established that both microstructure and mechanical properties depend on the shear applied during gelation, a unified physical framework linking these features remains lacking. Here, using $\kappa$-carrageenan gels as a model system, we use a combination of rheology and confocal microscopy to tackle their shear-induced structuring in fluid gels. We identify a thermo-rheological memory in $\kappa$-carrageenan gels formed under flow and show that it arises from a competition between shear and interparticle adhesion, captured by an Adhesion number. The resulting microstructural evolution is reminiscent of the behavior of attractive particulate dispersions under simple shear flow, thereby bridging gels made of macromolecules and particulate gels. This framework provides a route to tune fluid gel properties without altering their composition.

cond-mat.soft↗

arXiv2025

Curvilinear magnonic crystal based on 3D hierarchical nanotemplates

Curvilinear magnetic nanostructures enable control of magnetization dynamics through geometry-induced anisotropy and chiral interactions as well as magnetic field modulation. In this work, we report a curvilinear magnonic crystal based on large-area square arrays of truncated nanospikes fabricated by conformal coating of 3D hierarchical templates with permalloy thin films. Brillouin light scattering spectroscopy reveals anisotropic band structure with multiple dispersive and folded Bloch-type dispersive spin-wave modes as well as non-dispersive modes exhibiting direction-dependent frequency shifts and intensity asymmetries along lattice principal axes. Finite element micromagnetic simulations indicate that curvature-induced variations of the demagnetizing field govern the magnonic response, enabling the identification of modes propagating in nanochannels and other localized on nanospike apexes or along the ridges connecting adjacent nanospikes. The combination of geometric curvature and optical probing asymmetry produces directional dependence of magnonic bands, establishing 3D hierarchical templates as a versatile platform for curvature-engineered magnonics.

cond-mat.str-el↗

arXiv2025

Curvature induced modifications of chirality and magnetic configuration in perpendicular magnetized films

Designing curvature in three-dimensional (3D) magnetic nanostructures enables controlled manipulation of local energy landscapes, allowing for the modification of noncollinear spin textures relevant for next-generation spintronic devices. In this study, we experimentally investigate 3D magnetization textures in a Co/Pd multilayer film, exhibiting strong perpendicular magnetic anisotropy (PMA), deposited onto curved Cu nanowire meshes with diameters as small as 50nm and lengths of several microns. Utilizing magnetic soft X-ray nanotomography, we achieve reconstructions of 3D magnetic domain patterns at approximately 30nm spatial resolution. This approach provides detailed information on both the orientation and magnitude of magnetization within the film. Our results reveal that interfacial anisotropy in the Co/Pd multilayers drives the magnetization towards the local surface normal. In contrast to typical labyrinth domains observed in planar films, the presence of curved nanowires significantly alters the domain structure, with domains preferentially aligning along the nanowire axis in close proximity, while adopting random orientations farther away. We report direct experimental observation of a curvature-induced Dzyaloshinskii-Moriya interaction (DMI), which is quantified to be approximately one-third of the intrinsic DMI in Co/Pd stacks. The curvature induced DMI enhances stability of Neel-type domain walls. These experimental observations are further supported by micromagnetic simulations. Altogether, our findings demonstrate that introducing curvature into magnetic nanostructures provides a powerful strategy for tailoring complex magnetic behaviors, paving the way for the design of advanced 3D racetrack memory and neuromorphic computing devices.

cond-mat.mtrl-sci↗

arXiv2025

Design of a Large Area Digital SiPM with High Fill Factor and Fully Serial Digital Readout for Single Photon Detection in Liquid Noble Gas Detectors

We present a 'digital SiPM' photo-detection chip combining single photon sensitive avalanche photo diodes and CMOS readout electronics on a single die. The chip has a size of $8046\times9032\,\mu m^2$ with $72.5\%$ of photo sensitive area. It is subdivided into $32\times30$ pixels with an average size of $250\times291\,\mu m^2$. For each photon hit, the chip records the pixel coordinate and the arrival time with a granularity of $\approx 10\,ns$. Readout and chip control are purely digital, requiring only 4 CMOS signals. Several chips can be daisy chained and grouped on larger modules so that detector planes with $\approx70\%$ photo sensitive area can be build. Our chip may be used in experiments that need to detect rare scintillation events, for instance dark matter searches using liquid noble gases.

physics.ins-det↗

arXiv2024

Separating terahertz spin and charge contributions from ultrathin antiferromagnetic heterostructures

Femtosecond laser excitation of nanometer thin heterostructures comprising a heavy metal and a magnetically ordered material is known to result in the emission of terahertz radiation. However, the nature of the emitted radiation from heavy metal~/~antiferromagnet heterostructures has sparked debates and controversies in the literature. Here, we unambiguously separate spin and charge contributions from Pt~/~NiO heterostructures by introducing an unprecedented methodology combining high external magnetic fields with a symmetry analysis of the emitted terahertz polarization. We observe two distinct mechanisms of terahertz emission which we identify as optical difference frequency generation and ultrafast laser-induced quenching of the magnetization. We emphasize the absence of spin transport effects and signatures of coherent magnons. Overall, our work provides a general experimental methodology to separate spin and charge contributions to the laser-induced terahertz emission from heterostructures comprising a magnetically ordered material thus holding great potential for advancing terahertz spintronics and establishing terahertz orbitronics.

cond-mat.mes-hall↗

arXiv2024

PETAT -- An ASIC for Simple and Efficient Readout of Large PET Scanners

Modern PET scanners based on scintillating crystals use solid state photo detectors for light readout. The small area of these devices is beneficial for spatial resolution, but also leads to a large number of electronic channels to be read out, mostly by application specific integrated circuits (ASICs) containing amplification, noise reduction, hit finding, time stamping and amplitude measurement. Although each ASIC provides up to $\approx 64$ channels, a large number of chips is required with the need for auxiliary electronic components like voltage regulators or FPGAs for control and data readout. The FPGAs in turn often require multiple supply voltages and configuration infrastructure, so that PCBs get complicated, cumbersome and power-hungry, in addition to the significant power requirement of the front-end ASICs. We address this issue in the latest generation of our PETA readout ASIC for SiPMs by a simplified control scheme and, in particular, by a hierarchical serial data readout which does not require any additional FPGA. In addition, it provides a time-sorted stream of hit data, allowing early on-detector data reduction and hit pre-processing like the removal of hits with no coincident partner. The simplicity of this readout facilitates a supply scheme where power/ground of multiple ASICs are connected in series instead of the standard parallel connection. This 'serial-powering' approach can reduce supply current (while increasing overall supply voltage) so that voltage drop issues in the supply are alleviated.

physics.ins-det↗

arXiv2024

Colloquium: Quantum Properties and Functionalities of Magnetic Skyrmions

Competing magnetic interactions may stabilize smooth magnetization textures that can be characterized by a topological winding number. Such textures, which are spatially localized within a two-dimensional plane, are commonly known as skyrmions. On the classical level, their significance for fundamental science and their potential for applications, ranging from spintronic devices to unconventional computation platforms, have been intensively investigated in recent years. This Colloquium considers quantum effects associated with skyrmion textures: their theoretical origins, the experimental and material challenges associated with their detection, and the promise of exploiting them for quantum operations. Starting with classical skyrmions, we discuss their magnon and electron excitations and show how hybrid architectures offer new platforms for engineering quantum orders, including topological superconductivity. We then focus on the quantization of the skyrmion texture itself and formulate the long-time skyrmion dynamics in terms of collective coordinates. Next, we discuss the quantization of helicity and phenomena of macroscopic quantum tunneling: key concepts that fundamentally distinguish quantum skyrmions from their classical counterparts. Looking ahead, we propose material classes suitable for the realization of skyrmions in quantum spin systems and identify device architectures with the promise of achieving quantum operations. We close by addressing the advances in experimental methods which will be a prerequisite for resolving the quantum aspects of topological spin patterns, sensing their local dynamical response, and achieving their predicted functionalities in magnetic systems.

cond-mat.mes-hall↗

arXiv2024

Fact Finder -- Enhancing Domain Expertise of Large Language Models by Incorporating Knowledge Graphs

Recent advancements in Large Language Models (LLMs) have showcased their proficiency in answering natural language queries. However, their effectiveness is hindered by limited domain-specific knowledge, raising concerns about the reliability of their responses. We introduce a hybrid system that augments LLMs with domain-specific knowledge graphs (KGs), thereby aiming to enhance factual correctness using a KG-based retrieval approach. We focus on a medical KG to demonstrate our methodology, which includes (1) pre-processing, (2) Cypher query generation, (3) Cypher query processing, (4) KG retrieval, and (5) LLM-enhanced response generation. We evaluate our system on a curated dataset of 69 samples, achieving a precision of 78\% in retrieving correct KG nodes. Our findings indicate that the hybrid system surpasses a standalone LLM in accuracy and completeness, as verified by an LLM-as-a-Judge evaluation method. This positions the system as a promising tool for applications that demand factual correctness and completeness, such as target identification -- a critical process in pinpointing biological entities for disease treatment or crop enhancement. Moreover, its intuitive search interface and ability to provide accurate responses within seconds make it well-suited for time-sensitive, precision-focused research contexts. We publish the source code together with the dataset and the prompt templates used.

cs.CL↗

arXiv2023

Unforeseen advantage of looser focusing in vacuum laser acceleration

Acceleration of electrons in vacuum directly by intense laser fields, often termed vacuum laser acceleration (VLA), holds great promise for the creation of compact sources of high-charge, ultrashort, relativistic electron bunches. However, while the energy gain is expected to be higher with tighter focusing (i.e. stronger electric field), this does not account for the reduced acceleration range, which is limited by diffraction. Here, we present the results of an experimental investigation of VLA, using tungsten nanotips driven by relativistic-intensity few-cycle laser pulses. We demonstrate the acceleration of relativistic electron beams with typical charge of 100s pC to 15 MeV energies. Two different focusing geometries (tight and loose, with f-numbers one and three respectively) produced comparable results, despite a factor of ten difference in the peak intensities, which is evidence for the importance of post-injection acceleration mechanisms around the focus. Our results are in good agreement with the results of full-scale, three-dimensional particle-in-cell simulations.

physics.plasm-ph↗

arXiv2023

Revealing the Microscopic Mechanism of Displacive Excitation of Coherent Phonons in a Bulk Rashba Semiconductor

Changing the macroscopic properties of quantum materials by optically activating collective lattice excitations has recently become a major trend in solid state physics. One of the most commonly employed light-matter interaction routes is the displacive mechanism. However, the fundamental contribution to this process remains elusive, as the effects of free-carrier density modification and raised effective electronic temperature have not been disentangled yet. Here we use time-resolved pump-probe spectroscopy to address this issue in the Rashba semiconductor BiTeI. Exploring the conventional regime of electronic interband transitions for different excitation wavelengths as well as the barely accessed regime of electronic intraband transitions, we answer a long-standing open question regarding the displacive mechanism: the lattice modes are predominantly driven by the rise of the effective electronic temperature. In the intraband regime, which allows to increase the effective carrier temperature while leaving their density unaffected, the phonon coherence time does not display significant fluence-dependent variations. Our results thus reveal a pathway to displacive excitation of coherent phonons, free from additional scattering and dissipation mechanisms typically associated with an increase of the free-carrier density.

cond-mat.mes-hall↗

arXiv2023

Periodicity staircase in a Fe/Gd magnetic thin film

Presence of multiple competing periodicities may result in a system to go through states with modulated periodicities, an example of which is the self-similar staircase-like structure called the Devil's staircase. Herein we report on a novel staircase structure of domain periodicity in an amorphous and achiral Fe/Gd magnetic thin film wherein the reciprocal space wavevector \textbf{Q} due to the ordered stripe domains does not evolve continuously, rather exhibits a staircase structure. Resonant X-ray scattering experiments show jumps in the periodicity of the stripe domains as a function of an external magnetic field. When resolved in components, the step change along Q$_x$ was found to be an integral multiple of a minimum step height of 7 nm, which resembles closely to the exchange length of the system. Modeling the magnetic texture in the Fe/Gd thin film as an achiral spin arrangement, we have been able to reproduce the steps in the magnetization using a Landau-Lifshitz spin dynamics calculation. Our results indicate that anisotropy and not the dipolar interaction is the dominant cause for the staircase pattern, thereby revealing the effect of achiral magnetism.

cond-mat.mtrl-sci↗

arXiv2023

Quantifying the Topology of Magnetic Skyrmions in three Dimensions

Magnetic skyrmions have so far been treated as two-dimensional spin structures characterized by a topological winding number describing the rotation of spins across the skyrmion. However, in real systems with a finite thickness of the material being larger than the magnetic exchange length, the skyrmion spin texture extends into the third dimension and cannot be assumed as homogeneous. Using soft x-ray laminography we reconstruct with about 20nm spatial (voxel) resolution the full three-dimensional spin texture of a skyrmion in an 800 nm diameter and 95 nm thin disk patterned into a trilayer [Ir/Co/Pt] thin film structure. A quantitative analysis finds that the evolution of the radial profile of the topological skyrmion number and the chirality is non-uniform across the thickness of the disk. Estimates of local micromagnetic energy densities suggest that the changes in topological profile are related to non-uniform competing energetic interactions. Theoretical calculations and micromagnetic simulations are consistent with the experimental findings. Our results provide the foundation for nanoscale magnetic metrology for future tailored spintronics devices using topology as a design parameter, and have the potential to reverse-engineer a spin Hamiltonian from macroscopic data, tying theory more closely to experiment.

cond-mat.mtrl-sci↗

arXiv2023

On Ultrafast X-ray Methods for Magnetism

With the introduction of x-ray free electron laser sources around the world, new scientific approaches for visualizing matter at fundamental length and time-scales have become possible. As it relates to magnetism and "magnetic-type" systems, advanced methods are being developed for studying ultrafast magnetic responses on the time-scales at which they occur. We describe three capabilities which have the potential to seed new directions in this area and present original results from each: pump-probe x-ray scattering with low energy excitation, x-ray photon fluctuation spectroscopy, and ultrafast diffuse x-ray scattering. By combining these experimental techniques with advanced modeling together with machine learning, we describe how the combination of these domains allows for a new understanding in the field of magnetism. Finally, we give an outlook for future areas of investigation and the newly developed instruments which will take us there.

cond-mat.mtrl-sci↗

arXiv2022

Photon shot-noise limited transient absorption soft X-ray spectroscopy at the European XFEL

Femtosecond transient soft X-ray Absorption Spectroscopy (XAS) is a very promising technique that can be employed at X-ray Free Electron Lasers (FELs) to investigate out-of-equilibrium dynamics for material and energy research. Here we present a dedicated setup for soft X-rays available at the Spectroscopy & Coherent Scattering (SCS) instrument at the European X-ray Free Electron Laser (EuXFEL). It consists of a beam-splitting off-axis zone plate (BOZ) used in transmission to create three copies of the incoming beam, which are used to measure the transmitted intensity through the excited and unexcited sample, as well as to monitor the incoming intensity. Since these three intensity signals are detected shot-by-shot and simultaneously, this setup allows normalized shot-by-shot analysis of the transmission. For photon detection, the DSSC imaging detector, which is capable of recording up to 800 images at 4.5 MHz frame rate during the FEL burst, is employed and allows approaching the photon shot-noise limit. We review the setup and its capabilities, as well as the online and offline analysis tools provided to users.

physics.ins-det↗

arXiv2022

The interplay of local electron correlations and ultrafast spin dynamics in fcc Ni

The complex electronic structure of metallic ferromagnets is determined by a balance between exchange interaction, electron hopping leading to band formation, and local Coulomb repulsion. The interplay between the respective terms of the Hamiltonian is of fundamental interest, since it produces most, if not all, of the exotic phenomena observed in the solid state. By combining high energy and temporal resolution in femtosecond time-resolved X-ray absorption spectroscopy with ab initio time-dependent density functional theory we analyze the electronic structure in fcc Ni on the time scale of these interactions in a pump-probe experiment. We distinguish transient broadening and energy shifts in the absorption spectra, which we demonstrate to be caused by electron repopulation and correlation-induced modifications of the electronic structure, respectively. Importantly, the theoretical description of this experimental result hence requires to take the local Coulomb interaction into account, revealing a temporal interplay between band formation, exchange interaction, and Coulomb repulsion.

cond-mat.mtrl-sci↗

arXiv2022

Element-Specific First Order Reversal Curves Measured by Magnetic Transmission X-ray Microscopy

The first order reversal curve (FORC) method is a macroscopic measurement technique which can be used to extract quantitative, microscopic properties of hysteretic systems. Using magnetic transmission X-ray microscopy (MTXM), local element-specific FORC measurements are performed on a 20 nm thick film of CoTb. The FORCs measured with microscopy reveal a step-by-step domain evolution under the magnetic field cycling protocol, and provide a direct visualization of the mechanistic interpretation of FORC diagrams. They are compared with magnetometry FORCs and show good quantitative agreement. Furthermore, the high spatial resolution and element-specific sensitivity of MTXM provide new capabilities to measure FORCs on small regions or specific phases within multicomponent systems, including buried layers in heterostructures. The ability to perform FORCs on very small features is demonstrated with the MTXM-FORC measurement of a rectangular microstructure with vortex-like Landau structures. This work demonstrates the confluence of two uniquely powerful techniques to achieve quantitative insight into nanoscale magnetic behavior.

cond-mat.mtrl-sci↗