SearcharxivSearch

arXiv subjects

Peter Maunz

Publications and source records attributed to Peter Maunz.

At least 19 recordsLinked to original sources

Fast-feedback protocols for calibration and drift control in quantum computers

We introduce two classes of lightweight, adaptive calibration protocols for quantum computers that leverage fast feedback. The first enables shot-by-shot updates to device parameters using measurement outcomes from simple, indefinite-outcome quantum circuits. This low-latency approach supports rapid tuning of one or more parameters in real time to mitigate drift. The second protocol updates parameters after collecting measurements from definite-outcome circuits (e.g.~syndrome extraction circuits for quantum error correction), balancing efficiency with classical control overheads. We use numerical simulations to demonstrate that both methods can calibrate 1- and 2-qubit gates rapidly and accurately even in the presence of decoherence, state preparation and measurement (SPAM) errors, and parameter drift. We propose and demonstrate effective adaptive strategies for tuning the hyperparameters of both protocols. Finally, we demonstrate the feasibility of real-time in-situ calibration of qubits performing quantum error correction, using only syndrome data, via numerical simulations of syndrome extraction in the [[5,1,3]] code.

quant-ph

Benchmarking a trapped-ion quantum computer with 30 qubits

Quantum computers are rapidly becoming more capable, with dramatic increases in both qubit count and quality. Among different hardware approaches, trapped-ion quantum processors are a leading technology for quantum computing, with established high-fidelity operations and architectures with promising scaling. Here, we demonstrate and thoroughly benchmark the IonQ Forte system: configured as a single-chain 30-qubit trapped-ion quantum computer with all-to-all operations. We assess the performance of our quantum computer operation at the component level via direct randomized benchmarking (DRB) across all 30 choose 2 = 435 gate pairs. We then show the results of application-oriented benchmarks and show that the system passes the suite of algorithmic qubit (AQ) benchmarks up to #AQ 29. Finally, we use our component-level benchmarking to build a system-level model to predict the application benchmarking data through direct simulation. While we find that the system-level model correlates with the experiment in predicting application circuit performance, we note quantitative discrepancies indicating significant out-of-model errors, leading to higher predicted performance than what is observed. This highlights that as quantum computers move toward larger and higher-quality devices, characterization becomes more challenging, suggesting future work required to push performance further.

quant-ph

JaqalPaw: A Guide to Defining Pulses and Waveforms for Jaqal

One of the many challenges of developing an open user testbed such as QSCOUT is providing an interface that maintains simplicity without compromising expressibility or control. This interface comprises two distinct elements: a quantum assembly language designed for specifying quantum circuits at the gate level, and a low-level counterpart used for describing gates in terms of waveforms that realize specific quantum operations. Jaqal, or "Just another quantum assembly language," is the language used in QSCOUT for gate-level descriptions of quantum circuits. JaqalPaw, or "Jaqal pulses and waveforms," is its pulse-level counterpart. This document concerns the latter, and presents a description of the tools needed for precisely defining the underlying waveforms associated with a gate primitive.

quant-ph

Engineering the Quantum Scientific Computing Open User Testbed (QSCOUT): Design details and user guide

The Quantum Scientific Computing Open User Testbed (QSCOUT) at Sandia National Laboratories is a trapped-ion qubit system designed to evaluate the potential of near-term quantum hardware in scientific computing applications for the US Department of Energy (DOE) and its Advanced Scientific Computing Research (ASCR) program. Similar to commercially available platforms, most of which are based on superconducting qubits, it offers quantum hardware that researchers can use to perform quantum algorithms, investigate noise properties unique to quantum systems, and test novel ideas that will be useful for larger and more powerful systems in the future. However, unlike most other quantum computing testbeds, QSCOUT uses trapped $^{171}$Yb$^{+}$ ions as the qubits, provides full connectivity between qubits, and allows both quantum circuit and low-level pulse control access to study new modes of programming and optimization. The purpose of this manuscript is to provide users and the general community with details of the QSCOUT hardware and its interface, enabling them to take maximum advantage of its capabilities.

quant-ph

Detecting and tracking drift in quantum information processors

If quantum information processors are to fulfill their potential, the diverse errors that affect them must be understood and suppressed. But errors typically fluctuate over time, and the most widely used tools for characterizing them assume static error modes and rates. This mismatch can cause unheralded failures, misidentified error modes, and wasted experimental effort. Here, we demonstrate a spectral analysis technique for resolving time dependence in quantum processors. Our method is fast, simple, and statistically sound. It can be applied to time-series data from any quantum processor experiment. We use data from simulations and trapped-ion qubit experiments to show how our method can resolve time dependence when applied to popular characterization protocols, including randomized benchmarking, gate set tomography, and Ramsey spectroscopy. In the experiments, we detect instability and localize its source, implement drift control techniques to compensate for this instability, and then demonstrate that the instability has been suppressed.

quant-ph

Just another quantum assembly language (Jaqal)

The Quantum Scientific Computing Open User Testbed (QSCOUT) is a trapped-ion quantum computer testbed realized at Sandia National Laboratories on behalf of the Department of Energy's Office of Science and its Advanced Scientific Computing (ASCR) program. Here we describe Jaqal, for Just another quantum assembly language, the programming language we invented to specify programs executed on QSCOUT. Jaqal is useful beyond QSCOUT---it can support mutliple hardware targets because it offloads gate names and their pulse-sequence definitions to external files. We describe the capabilities of the Jaqal language, our approach in designing it, and the reasons for its creation. To learn more about QSCOUT, Jaqal, or JaqalPaq, the metaprogramming Python package we developed for Jaqal, please visit https://qscout.sandia.gov, https://gitlab.com/jaqal, or send an e-mail to qscout@sandia.gov.

quant-ph

Quantum Computer Systems for Scientific Discovery

The great promise of quantum computers comes with the dual challenges of building them and finding their useful applications. We argue that these two challenges should be considered together, by co-designing full-stack quantum computer systems along with their applications in order to hasten their development and potential for scientific discovery. In this context, we identify scientific and community needs, opportunities, a sampling of a few use case studies, and significant challenges for the development of quantum computers for science over the next 2--10 years. This document is written by a community of university, national laboratory, and industrial researchers in the field of Quantum Information Science and Technology, and is based on a summary from a U.S. National Science Foundation workshop on Quantum Computing held on October 21--22, 2019 in Alexandria, VA.

quant-ph

Jaqal, the Quantum Assembly Language for QSCOUT

QSCOUT is the Quantum Scientific Computing Open User Testbed, a trapped-ion quantum computer testbed realized at Sandia National Laboratories on behalf of the Department of Energy's Office of Science and its Advanced Scientific Computing (ASCR) program. Jaqal, for Just Another Quantum Assembly Language, is the programming language used to specify programs executed on QSCOUT. This document contains a specification of Jaqal along with a summary of QSCOUT 1.0 capabilities, example Jaqal programs, and plans for possible future extensions. To learn more about QSCOUT and the Jaqal language developed for it, please visit qscout.sandia.gov or send an e-mail to qscout@sandia.gov.

quant-ph

Experimental demonstration of cheap and accurate phase estimation

We demonstrate experimental implementation of robust phase estimation (RPE) to learn the phases of X and Y rotations on a trapped $\textrm{Yb}^+$ ion qubit. We estimate these phases with uncertainties less than $4\cdot10^{-4}$ radians using as few as 176 total experimental samples per phase, and our estimates exhibit Heisenberg scaling. Unlike standard phase estimation protocols, RPE neither assumes perfect state preparation and measurement, nor requires access to ancillae. We cross-validate the results of RPE with the more resource-intensive protocol of gate set tomography.

quant-ph

Demonstration of qubit operations below a rigorous fault tolerance threshold with gate set tomography

Quantum information processors promise fast algorithms for problems inaccessible to classical computers. But since qubits are noisy and error-prone, they will depend on fault-tolerant quantum error correction (FTQEC) to compute reliably. Quantum error correction can protect against general noise if -- and only if -- the error in each physical qubit operation is smaller than a certain threshold. The threshold for general errors is quantified by their diamond norm. Until now, qubits have been assessed primarily by randomized benchmarking, which reports a different "error rate" that is not sensitive to all errors, and cannot be compared directly to diamond norm thresholds. Here we use gate set tomography (GST) to completely characterize operations on a trapped-Yb$^+$-ion qubit and demonstrate with very high ($>95\%$) confidence that they satisfy a rigorous threshold for FTQEC (diamond norm $\leq6.7\times10^{-4}$).

quant-ph

An Integrated Mirror and Surface Ion Trap with a Tunable Trap Location

We report a demonstration of a surface ion trap fabricated directly on a highly reflective mirror surface, which includes a secondary set of radio frequency (RF) electrodes allowing for translation of the quadrupole RF null location. We introduce a position-dependent photon scattering rate for a $^{174}$Yb$^+$ ion in the direction perpendicular to the trap surface using a standing wave of retroreflected light off the mirror surface directly below the trap. Using this setup, we demonstrate the capability of fine-tuning the RF trap location with nanometer scale precision and characterize the charging effects of the dielectric mirror surface upon exposure to ultra-violet light.

quant-ph

Freely configurable quantum simulator based on a two-dimensional array of individually trapped ions

A custom-built and precisely controlled quantum system may offer access to a fundamental understanding of another, less accessible system of interest. A universal quantum computer is currently out of reach, but an analog quantum simulator that makes the relevant observables, interactions, and states of a quantum model accessible could permit experimental insight into complex quantum dynamics that are intractable on conventional computers. Several platforms have been suggested and proof-of-principle experiments have been conducted. Here we characterise two-dimensional arrays of three ions trapped by radio-frequency fields in individually controlled harmonic wells forming equilateral triangles with side lengths 40 and 80 micrometer. In our approach, which is scalable to arbitrary two dimensional lattices, we demonstrate individual control of the electronic and motional degrees of freedom, preparation of a fiducial initial state with ion motion close to the ground state, as well as tuning of crucial couplings between ions within experimental sequences. Our work paves the way towards an analog quantum simulator of two-dimensional systems designed at will.

quant-ph

Scalable Digital Hardware for a Trapped Ion Quantum Computer

Many of the challenges of scaling quantum computer hardware lie at the interface between the qubits and the classical control signals used to manipulate them. Modular ion trap quantum computer architectures address scalability by constructing individual quantum processors interconnected via a network of quantum communication channels. Successful operation of such quantum hardware requires a fully programmable classical control system capable of frequency stabilizing the continuous wave lasers necessary for trapping and cooling the ion qubits, stabilizing the optical frequency combs used to drive logic gate operations on the ion qubits, providing a large number of analog voltage sources to drive the trap electrodes, and a scheme for maintaining phase coherence among all the controllers that manipulate the qubits. In this work, we describe scalable solutions to these hardware development challenges.

quant-ph

Error Compensation of Single-Qubit Gates in a Surface Electrode Ion Trap Using Composite Pulses

The fidelity of laser-driven quantum logic operations on trapped ion qubits tend to be lower than microwave-driven logic operations due to the difficulty of stabilizing the driving fields at the ion location. Through stabilization of the driving optical fields and use of composite pulse sequences, we demonstrate high fidelity single-qubit gates for the hyperfine qubit of a $^{171}\text{Yb}^+$ ion trapped in a microfabricated surface electrode ion trap. Gate error is characterized using a randomized benchmarking protocol, and an average error per randomized Clifford group gate of $3.6(3)\times10^{-4}$ is measured. We also report experimental realization of palindromic pulse sequences that scale efficiently in sequence length.

quant-ph

Assembling a ring-shaped crystal in a microfabricated surface ion trap

We report on experiments with a microfabricated surface trap designed for trapping a chain of ions in a ring. Uniform ion separation over most of the ring is achieved with a rotationally symmetric design and by measuring and suppressing undesired electric fields. After minimizing these fields the ions are confined primarily by an rf trapping pseudo-potential and their mutual Coulomb repulsion. The ring-shaped crystal consists of approximately 400 Ca$^+$ ions with an estimated average separation of 9 $μm$.

quant-ph

Robust, self-consistent, closed-form tomography of quantum logic gates on a trapped ion qubit

We introduce and demonstrate experimentally: (1) a framework called "gate set tomography" (GST) for self-consistently characterizing an entire set of quantum logic gates on a black-box quantum device; (2) an explicit closed-form protocol for linear-inversion gate set tomography (LGST), whose reliability is independent of pathologies such as local maxima of the likelihood; and (3) a simple protocol for objectively scoring the accuracy of a tomographic estimate without reference to target gates, based on how well it predicts a set of testing experiments. We use gate set tomography to characterize a set of Clifford-generating gates on a single trapped-ion qubit, and compare the performance of (i) standard process tomography; (ii) linear gate set tomography; and (iii) maximum likelihood gate set tomography.

quant-ph

Single qubit manipulation in a microfabricated surface electrode ion trap

We trap individual $^{171}$Yb$^+$ ions in a surface trap microfabricated on a silicon substrate, and demonstrate a complete set of high fidelity single qubit operations for the hyperfine qubit. Trapping times exceeding 20 minutes without laser cooling, and heating rates as low as 0.8(0.1) quanta/ms indicate stable trapping conditions in these microtraps. A coherence time of more than one second, high fidelity qubit state detection and single qubit rotations are demonstrated.

quant-ph

Characterization of fluorescence collection optics integrated with a micro-fabricated surface electrode ion trap

One of the outstanding challenges for ion trap quantum information processing is to accurately detect the states of many ions in a scalable fashion. In the particular case of surface traps, geometric constraints make imaging perpendicular to the surface appealing for light collection at multiple locations with minimal cross-talk. In this report we describe an experiment integrating Diffractive Optic Elements (DOE's) with surface electrode traps, connected through in-vacuum multi-mode fibers. The square DOE's reported here were all designed with solid angle collection efficiencies of 3.58%; with all losses included a detection efficiency of 0.388% (1.02% excluding the PMT loss) was measured with a single Ca+ ion. The presence of the DOE had minimal effect on the stability of the ion, both in temporal variation of stray electric fields and in motional heating rates.

physics.atom-ph