arXiv subjects

Philip Schädlich

Publications and source records attributed to Philip Schädlich.

10 recordsLinked to original sources

arXiv2026

Spin- and Angle-resolved Photoelectron Spectroscopy Study of the Quantum Spin Hall Insulator Bismuthene and its Precursor Phase

Recent studies have revealed that a confined bismuth layer at the graphene/SiC interface can be reversibly switched between a topologically trivial precursor phase and the quantum spin Hall insulator bismuthene. Here, we present a detailed spin- and angle-resolved photoelectron spectroscopy study of both structures, resolving the spin texture of their low-energy electronic states. Owing to the strong intrinsic spin-orbit coupling of bismuth and the asymmetric confinement potential at the interface, the valence bands of both structures are Rashba-split. We demonstrate the expected spin-momentum locking for both phases and Kramers' doublets through the investigation of the valence bands' spin polarization at multiple positions in reciprocal space.

cond-mat.mtrl-sci↗

arXiv2025

Si Intercalation Beneath Epitaxial Graphene: Modulating Mott States at the SiC(0001) Interface

Intercalation has proven to be a powerful tool for tailoring the electronic properties of freestanding graphene layers as well as for stabilizing the intercalated material in a two-dimensional configuration. This work examines Si intercalation of epitaxial graphene on SiC(0001) using three preparation methods. Dangling bond states at the interface were found to undergo a Mott-Hubbard metal-insulator transition as a result of a significant on-site repulsion. Comparing this heterostructure consisting of graphene and a Mott insulator with a similar system without graphene, reveals the screening ability of graphene's conduction electrons on the on-site repulsion. The system presented here can serve as a template for further research on Mott insulators with variable band gap.

cond-mat.mtrl-sci↗

arXiv2025

Solving the Phase Problem of Diffraction: X-ray Standing Waves Imaging on Bismuthene/SiC(0001)

The phase retrieval problem is a fundamental shortcoming of all diffraction-based methods, arising from the inability to measure the phase of scattered waves. The (normal incidence) X-ray standing wave (NIXSW) technique circumvents this issue by introducing a (Bragg-generated) X-ray standing wave field throughout the sample, relative to which any atomic species can be localized by probing its fluorescence or photoelectron yield. In essence, in a single measurement the complex scattering factor (i.e., its amplitude \textit{and} phase) corresponding to the used Bragg reflection is determined. Performing this for multiple Bragg reflections enables one to reconstruct the scattering density of the sample in three dimensions, straightforwardly as the Fourier sum of all measured (complex) scattering factors. Here, we utilize this technique to reveal the structural key features involved in the formation of the quantum spin Hall insulator bismuthene on silicon carbide. In this prominent example, the two-dimensional Bi layer is confined between a 4H-SiC substrate crystal and an epitaxial graphene layer. The key finding is a change in the adsorption site of the Bi atoms underneath the graphene upon hydrogenation, caused by the H-saturation of one (out of three) Si dangling bonds per unit cell. This structural change, clearly revealed by our NIXSW imaging experiment, is the key feature leading to the formation of the characteristic band structure of the 2D bismuthene honeycomb.

cond-mat.mes-hall↗

arXiv2025

Growth dynamics of graphene buffer layer formation on ultra-smooth SiC(0001) surfaces

In this study the growth process of epitaxial graphene on SiC was investigated systematically. The transition from the initial buffer layer growth to the formation of the first monolayer graphene domains was investigated by various techniques: atomic force microscopy, low energy electron diffraction, low energy electron microscopy, Raman spectroscopy, scanning tunneling spectroscopy and scanning electron microscopy. The data show that the buffer layer formation goes along with a simultaneous SiC decomposition which takes place as a rapid step retraction of one specific type of SiC bilayer in good agreement with the step retraction model. Once the buffer layer coverage is completed, the resulting characteristic regular repeating terrace and step height pattern of one and two SiC bilayers turned out to be very stable against further SiC decomposition. The following initial growth of monolayer graphene domains occurs, interestingly, only along the two bilayer high terrace edges. This behavior is explained by a preferential SiC decomposition at the higher step edges and it has some potential for spatial graphene growth control. The corresponding earlier graphene growth on one terrace type can explain the different scanning tunneling spectroscopy nanoscale resistivities on these terraces.

cond-mat.mtrl-sci↗

arXiv2025

Reversible Switching of the Environment-Protected Quantum Spin Hall Insulator Bismuthene at the Graphene/SiC Interface

Quantum Spin Hall Insulators (QSHI) have been extensively studied both theoretically and experimentally because they exhibit robust helical edge states driven by spin-orbit coupling and offer the potential for applications in spintronics through dissipationless spin transport. However, to realize devices, it is indispensable to gain control over the interaction of the active layer with the substrate, and to protect it from environmental influences. Here we show that a single layer of elemental Bi, formed by intercalation of an epitaxial graphene buffer layer on SiC(0001), is a promising candidate for a QSHI. This layer can be reversibly switched between an electronically inactive precursor state and a ``bismuthene state'', the latter exhibiting the predicted band structure of a true two-dimensional bismuthene layer. Switching is accomplished by hydrogenation (dehydrogenation) of the sample, i.e., a partial passivation (activation) of dangling bonds of the SiC substrate, causing a lateral shift of Bi atoms involving a change of the adsorption site. In the bismuthene state, the Bi honeycomb layer is a prospective QSHI, inherently protected by the graphene sheet above and the H-passivated substrate below. Thus, our results represent an important step towards protected QSHI systems beyond graphene.

cond-mat.mes-hall↗

arXiv2023

Nano-ARPES investigation of twisted bilayer tungsten disulfide

The diverse and intriguing phenomena observed in twisted bilayer systems, such as graphene and transition metal dichalcogenides, prompted new questions about the emergent effects that they may host. However, the practical challenge of realizing these structures on a scale large enough for spectroscopic investigation, remains a significant hurdle, resulting in a scarcity of direct measurements of the electronic band structure of twisted transition metal dichalcogenide bilayers. Here we present a systematic nanoscale angle-resolved photoemission spectroscopy investigation of bulk, single layer, and twisted bilayer WS2 with a small twist angle of 4.4°. The experimental results are compared with theoretical calculations based on density functional theory along the high-symmetry directions Γ-K and Γ-M. Surprisingly, the electronic band structure measurements suggest a structural relaxation occurring at 4.4° twist angle, and formation of large, untwisted bilayer regions.

physics.chem-ph↗

arXiv2023

Determination of the Spacing Between Hydrogen-Intercalated Quasi-Free-Standing Monolayer Graphene and 6H-SiC(0001) Using Total-Reflection High-Energy Positron Diffraction

We have investigated the structure of hydrogen-intercalated quasi-free-standing monolayer graphene (QFMLG) grown on 6H-SiC(0001) by employing total-reflection high-energy positron diffraction (TRHEPD). At least nine diffraction spots of the zeroth order Laue zone were resolved along <11-20> and three along <1-100>, which are assigned to graphene, SiC and higher order spots from multiple diffraction on both lattices. We further performed rocking curve analysis based on the full dynamical diffraction theory to precisely determine the spacing between QFMLG and the SiC substrate. Our study yields a spacing of d = 4.18(6)Å that is in excellent agreement with the results from density-functional theory (DFT) calculations published previously.

cond-mat.mtrl-sci↗

arXiv2022

Vertical structure of Sb-intercalated quasifreestanding graphene on SiC(0001)

Using the normal incidence x-ray standing wave technique as well as low energy electron microscopy we have investigated the structure of quasi-freestanding monolayer graphene (QFMLG) obtained by intercalation of antimony under the $\left(6\sqrt{3}\times6\sqrt{3}\right)R30^\circ$ reconstructed graphitized 6H-SiC(0001) surface, also known as zeroth-layer graphene. We found that Sb intercalation decouples the QFMLG well from the substrate. The distance from the QFMLG to the Sb layer almost equals the expected van der Waals bonding distance of C and Sb. The Sb intercalation layer itself is mono-atomic, flat, and located much closer to the substrate, at almost the distance of a covalent Sb-Si bond length. All data is consistent with Sb located on top of the uppermost Si atoms of the SiC bulk.

cond-mat.mtrl-sci↗

arXiv2020

Silicon carbide stacking-order-induced doping variation in epitaxial graphene

Generally, it is supposed that the Fermi level in epitaxial graphene is controlled by two effects: p-type polarization doping induced by the bulk of the hexagonal SiC(0001) substrate and overcompensation by donor-like states related to the buffer layer. In this work, we evidence that this effect is also related to the specific underlying SiC terrace. We fabricated a periodic sequence of non-identical SiC terraces, which are unambiguously attributed to specific SiC surface terminations. A clear correlation between the SiC termination and the electronic graphene properties is experimentally observed and confirmed by various complementary surface-sensitive methods. We attribute this correlation to a proximity effect of the SiC termination-dependent polarization doping on the overlying graphene layer. Our findings open a new approach for a nano-scale doping-engineering by self-patterning of epitaxial graphene and other 2D layers on dielectric polar substrates.

cond-mat.mtrl-sci↗

arXiv2020

Substrate induced nanoscale resistance variation in epitaxial graphene

Graphene, the first true two-dimensional material still reveals the most remarkable transport properties among the growing class of two-dimensional materials. Although many studies have investigated fundamental scattering processes, the surprisingly large variation in the experimentally determined resistances associated with a localized defect is still an open issue. Here, we quantitatively investigate the local transport properties of graphene prepared by polymer assisted sublimation growth (PASG) using scanning tunneling potentiometry. PASG graphene is characterized by a spatially homogeneous current density, which allows to analyze variations in the local electrochemical potential with high precision. We utilize this possibility by examining the local sheet resistance finding a significant variation of up to 270% at low temperatures. We identify a correlation of the sheet resistance with the stacking sequence of the 6H-SiC substrate as well as with the distance between the graphene sheet and the substrate. Our results experimentally quantify the strong impact of the graphene-substrate interaction on the local transport properties of graphene.

cond-mat.mes-hall↗