Searcharxiv⌕ Search

arXiv subjects

Philip St. J. Russell

Publications and source records attributed to Philip St. J. Russell.

At least 19 recordsLinked to original sources
arXiv2026

Oblique Bragg-Doppler scattering at relativistic grating created by backward Raman amplification in hydrogen

We report the first observation of relativistic "Bragg-Doppler" reflection, which occurs when a light beam is incident on a fine-period phase grating moving at close to the speed of light. The grating is created in hydrogen-filled hollow-core fibre by seeded backward stimulated Raman scattering, which creates an intense coherence wave of molecular vibrations at 125 THz, with wavelength 299 nm, moving at ~c/8. When this grating is obliquely probed at a generalized Bragg angle, a reflected beam emerges, Doppler-shifted by 125 THz. The effect is also uni-directional, as phase-matching is strongly violated when the probe beam is reversed, so may be viewed as an ultra-high frequency Bragg-cell frequency-shifter. The wide transparency window of hydrogen allows frequency shifting of radiation from the visible to the vacuum UV, simply by tuning the incident angle. The results open up new opportunities for spatio-temporal studies of coherence wave dynamics, frequency conversion in difficult-to-access spectral regions such as the deep and vacuum UV, and quantum-state-preserving frequency conversion of single photons.

physics.optics↗
arXiv2026

Viscoelastic dynamics of nanoparticles optically trapped in moving fringe pattern in air-filled hollow-core fiber

We report optical trapping and transport of nanoparticles in a moving interference pattern in hollow-core photonic crystal fiber at atmospheric pressure, when competition between trapping and drag forces causes the particle velocity to oscillate as it is momentarily captured and accelerated by each passing fringe, followed by release and deceleration by viscous forces. As a result the average particle velocity is lower than the fringe velocity. We refer to this phenomenon as drag-trapping. An analytical model of the resulting motion shows excellent agreement with experiment. Additional control is possible by introducing an imbalance in the backward and forward powers. The high precision of this new technique makes it of interest for example in characterizing nanoparticles, exploring viscous drag forces in different gases and liquids, and temperature sensing.

physics.optics↗
arXiv2026

Optomagnetic forces on YIG/YFeO3 microspheres levitated in chiral hollow-core photonic crystal fibre

We explore a magnetooptomechanical system consisting of a single magnetic microparticle optically levitated within the core of a helically twisted single-ring hollow-core photonic crystal fibre. We use newly-developed magnetic particles that have a core of antiferromagnetic yttrium-ortho-ferrite (YFeO3) and a shell of ferrimagnetic YIG (Y3Fe5O12) approximately 50 nm thick. Using a 632.8 nm probe beam, we observe optical-torque-induced rotation of the particle and rotation of the magnetization vector in presence of an external static magnetic field. This one-of-a-kind platform opens a path to novel investigations of optomagnetic physics with levitated magnetic particles.

physics.optics↗
arXiv2024

Retiming dynamics of harmonically modelocked laser solitons in a self-driven optomechanical lattice

Harmonic mode-locking, realized actively or passively, is an effective technique for increasing the repetition rate of lasers, with important applications in optical sampling, laser micro-machining and frequency metrology. It is critically important to understand how a harmonically mode-locked pulse train responds to external perturbations and noise, so as to make sure that it is stable and resistant to noise. Here, in a series of carefully designed experiments, we elucidate the retiming dynamics of laser pulses generated in a soliton fiber laser harmonically mode-locked at ~2 GHz to the acoustic resonance in a photonic crystal fiber (PCF) core. We characterize the self-driven optomechanical lattice along the PCF using a homodyne set-up, and reveal that each soliton undergoes damped oscillatory retiming within its trapping potential after an abrupt perturbation. In addition we show, through statistical analysis of the intra-cavity pulse spacing, how the trapping potentials are effective for suppressing timing jitter. The experimental results are well described using a dynamic model including dissipation, which provides valuable insight into the stability and noise performance of optomechanically mode-locked laser systems, and may also be useful for studying complex inter-soliton interactions.

physics.optics↗
arXiv2024

Frequency conversion of vortex states by chiral forward Brillouin scattering in twisted photonic crystal fibre

Optical vortex states-higher optical modes with helical phase progression and carrying orbital angular momentum-have been explored to increase the flexibility and capacity of optical fibres employed for example in mode-division-multiplexing, optical trapping and multimode imaging. A common requirement in such systems is high fidelity transfer of signals between different frequency bands and modes, which for vortex modes is not so straightforward. Here we report intervortex conversion between backward-propagating circularly polarised vortex modes at one wavelength, using chiral flexural phonons excited by chiral forward stimulated Brillouin scattering at a different wavelength. The experiment is carried out using chiral photonic crystal fibre, which robustly preserves circular polarisation states. The chiral acoustic wave, which has the geometry of a spinning single-spiral corkscrew, provides the orbital angular momentum necessary to conserve angular momentum between the coupled optical vortex modes. The results open up new opportunities for interband optical frequency conversion and the manipulation of vortex states in both classical and quantum regimes.

physics.optics↗
arXiv2023

Valleytronics in bulk MoS$_2$ by optical control of parity and time symmetries

The valley degree of freedom of electrons in materials promises routes toward energy-efficient information storage with enticing prospects towards quantum information processing. Current challenges in utilizing valley polarization are symmetry conditions that require monolayer structures or specific material engineering, non-resonant optical control to avoid energy dissipation, and the ability to switch valley polarization at optical speed. We demonstrate all-optical and non-resonant control over valley polarization using bulk MoS$_2$, a centrosymmetric material with zero Berry curvature at the valleys. Our universal method utilizes spin-angular momentum-shaped tri-foil optical control pulses to switch the material's electronic topology to induce valley polarization by transiently breaking time and space inversion symmetry through a simple phase rotation. The dependence of the generation of the second harmonic of an optical probe pulse on the phase rotation directly demonstrates the efficacy of valley polarization. It shows that direct optical control over the valley degree of freedom is not limited to monolayer structures. Instead, it is possible for systems with an arbitrary number of layers and bulk materials. Universal and non-resonant valley control at optical speeds unlocks the possibility of engineering efficient, multi-material valleytronic devices operating on quantum coherent timescales.

cond-mat.mtrl-sci↗
arXiv2022

Temporal self-compression and self-frequency shift of sub-microjoule pulses at 8 MHz repetition rate

We combine soliton dynamics in gas-filled hollow-core photonic crystal fibers with a state-of-the-art fiber laser to realize a turn-key system producing few-fs pulses at 8 MHz repetition rate at pump energies as low as 220 nJ. Furthermore, by exploiting the soliton self-frequency shift in a second hydrogen-filled hollow-core fiber, we efficiently generate pulses as short as 22 fs, continuously tunable from 1100 nm to 1474 nm.

physics.optics↗
arXiv2022

High-quality 8-fold self-compression of ultrashort near-UV pulses in Ar-filled ultrathin-walled photonic crystal fiber

We demonstrate generation of 7.6 fs near-UV pulses centered at 400 nm via 8-fold soliton-effect self-compression in an Ar-filled hollow-core kagomé-style photonic crystal fiber with ultrathin core walls. Analytical calculations of the effective compression length and soliton order permit adjustment of the experimental parameters, and numerical modelling of the nonlinear pulse dynamics in the fiber accurately predict the spectro-temporal profiles of the self-compressed pulses. After compensation of phase distortion introduced by the optical elements along the beam path from the fiber to the diagnostics, 71% of the pulse energy was in the main temporal lobe, with peak powers in excess of 0.2 GW. The convenient set-up opens up new opportunities for time-resolved studies in spectroscopy, chemistry and materials science.

physics.optics↗
arXiv2022

Optical vortex Brillouin laser

Optical vortices, which have been extensively studied over the last decades, offer an additional degree of freedom useful in many applications, such as optical tweezers and quantum control. Stimulated Brillouin scattering, providing a narrow linewidth and a strong nonlinear response, has been used to realise quasi-continuous wave (CW) lasers. Here, we report stable oscillation of optical vortices and acoustic modes in a Brillouin laser based on chiral photonic crystal fibre, which robustly supports helical Bloch modes (HBMs) that carry circularly-polarized optical vortex and display circular birefringence. We implement a narrow-linewidth Brillouin fibre laser that stably emits 1st- and 2nd-order vortex-carrying HBMs. Angular momentum conservation selection rules dictate that pump and backward Brillouin signals have opposite topological charge and spin. Additionally, we show that when the chiral PCF is placed within a laser ring cavity, the linewidth-narrowing associated with lasing permits the peak of the Brillouin gain that corresponds to acoustic mode to be measured with resolution of 10 kHz and accuracy of 520 kHz. The results pave the way to a new generation of vortex-carrying SBS systems with applications in quantum information processing, vortex-carrying nonreciprocal systems.

physics.optics↗
arXiv2022

Nonreciprocal vortex isolator by stimulated Brillouin scattering in chiral photonic crystal fibre

Optical non-reciprocity, which breaks the symmetry between forward and backward propagating optical waves, has become vital in photonic systems and enables many key devices, such as optical isolators, circulators and optical routers. Most conventional optical isolators involve magneto-optic materials, but devices based on optical nonlinearities, optomechanically induced transparency and stimulated Brillouin scattering (SBS) have also been demonstrated. So far, however, they have only been implemented for linearly or randomly polarized LP01-like fundamental modes. Here we report a light-driven nonreciprocal isolator for optical vortex modes, based on topology-selective SBS in chiral photonic crystal fibre. The device can be reconfigured as an amplifier or an isolator by adjusting the frequency of the control signal. The experimental results show vortex isolation of 22 dB, which is at the state-of-the-art in fundamental mode isolators using SBS. This unique device may find applications in optical communications, fibre lasers, quantum information processing and optical tweezers.

physics.optics↗
arXiv2021

Stimulated Brillouin scattering in chiral photonic crystal fiber

Stimulated Brillouin scattering (SBS) has many applications, for example, in sensing, microwave photonics and signal processing. Here we report the first experimental study of SBS in chiral photonic crystal fiber (PCF), which displays optical activity and robustly maintains circular polarization states against external perturbations. As a result, circularly polarized pump light is cleanly back-scattered into a Stokes signal with the orthogonal circular polarization state, as is required by angular momentum conservation. By comparison, untwisted PCF generates a Stokes signal with an unpredictable polarization state, owing to its high sensitivity to external perturbations. We use chiral PCF to realize a circularly polarized continuous-wave Brillouin laser. The results pave the way to a new generation of stable circularly polarized SBS systems with applications in quantum manipulation, optical tweezers, optical gyroscopes and fiber sensors.

physics.optics↗
arXiv2021

Deep-UV-enhanced supercontinuum generated in tapered gas-filled photonic crystal fiber

We present the use of linearly down-tapered gas-filled hollow-core photonic crystal fiber in a single-stage, pumped with pulses from a compact infrared laser source, to generate a supercontinuum carrying significant spectral power in the deep ultraviolet (200 - 300 nm). The generated supercontinuum extends from the near infrared down to around 213 nm with up to 0.83 mW/nm in the deep ultraviolet.

physics.optics↗
arXiv2021

Efficient self-compression of ultrashort UV pulses in air-filled hollow-core photonic crystal fiber

We report generation of ultrashort UV pulses by soliton self-compression in kagomé-style hollow-core photonic crystal fiber filled with ambient air. Pump pulses with energy 2.6 uJ and duration 54 fs at 400 nm were compressed temporally by a factor of 5, to a duration of ~11 fs. The experimental results are supported by numerical simulations, showing that both Raman and Kerr effects play a role in the compression dynamics. The convenience of using ambient air, and the absence of glass windows that would distort the compressed pulses, makes the setup highly attractive as the basis of an efficient table-top UV pulse compressor.

physics.optics↗
arXiv2020

Covariance spectroscopy of molecular gases using fs pulse bursts created by modulational instability in gas-filled hollow-core fiber

We present a technique that uses noisy broadband pulse bursts generated by modulational instability to probe nonlinear processes, including infrared-inactive Raman transitions, in molecular gases. These processes imprint correlations between different regions of the noisy spectrum, which can be detected by acquiring single shot spectra and calculating the Pearson correlation coefficient between the different frequency components. Numerical simulations verify the experimental measurements and are used to further understand the system and discuss methods to improve the signal strength and the spectral resolution of the technique.

physics.optics↗
arXiv2020

Frenet-Serret analysis of helical Bloch modes in N-fold rotationally symmetric rings of coupled spiralling optical waveguides

The behavior of electromagnetic waves in chirally twisted structures is a topic of enduring interest, dating back at least to the invention in the 1940s of the microwave travelling wave tube amplifier and culminating in contemporary studies of chiral metamaterials, metasurfaces, and photonic crystal fibers (PCFs). Optical fibers with chiral microstructures, drawn from a spinning preform, have many useful properties, exhibiting for example circular birefringence and circular dichroism. It has recently been shown that chiral fibers with N fold rotationally symmetric (symmetry group CN) transverse microstructures support families of helical Bloch modes (HBMs), each of which consists of a superposition of azimuthal Bloch harmonics (or optical vortices). An example is a fiber with N coupled cores arranged in a ring around its central axis (N core single ring fiber). Although this type of fiber can be readily modelled using scalar coupled mode theory, a full description of its optical properties requires a vectorial analysis that takes account of the polarization state of the light particularly important in studies of circular and vortical birefringence. In this paper we develop, using an orthogonal two dimensional helicoidal coordinate system embedded in a cylindrical surface at constant radius, a rigorous vector coupled mode description of the fields using local Frenet Serret frames that rotate and twist with each of the N cores. The analysis places on a firm theoretical footing a previous HBM theory in which a heuristic approach was taken, based on physical intuition of the properties of Bloch waves. We believe this study provides clarity in what can sometimes be a rather difficult field, and will facilitate further exploration of real-world applications of these fascinating waveguiding systems.

physics.optics↗
arXiv2020

High-brightness seven-octave carrier envelope phase-stable light source

High-brightness sources of coherent and few-cycle-duration light waveforms with spectral coverage from the UV to the THz would offer unprecedented versatility and opportunities for a spectacular range of applications from bio-chemical sensing, to time-resolved and nonlinear spectroscopy, to attosecond light-wave electronics. Combinations of various sources with frequency conversion and supercontinuum generation can provide relatively large spectral coverage, but many applications require much broader spectral range and low-jitter synchronization for time-domain measurements. Here, we present a carrier-envelope-phase stable light source, seeded by a mid-IR frequency comb, with simultaneous spectral coverage across 7 optical octaves, from the UV (340 nm) into the THz (40,000 nm). Combining soliton self-compression and dispersive wave generation in an anti-resonant-reflection photonic crystal fibre with intra-pulse difference frequency generation in BaGa2GeSe6, the spectral brightness is 2-5 orders of magnitude above synchrotron sources. This enables high-dynamic-range spectroscopies and provides enticing prospects for attosecond physics and material sciences.

physics.optics↗
arXiv2020

Optomechanical cooling and self-stabilization of a waveguide coupled to a whispering-gallery-mode resonator

Laser cooling of mechanical degrees of freedom is one of the most significant achievements in the field of opto-mechanics. Here, we report, for the first time to the best of our knowledge, efficient passive optomechanical cooling of the motion of a freestanding waveguide coupled to a whispering-gallery-mode (WGM) resonator. The waveguide is an 8 mm long glass-fiber nanospike, which has a fundamental flexural resonance at Ω/2π = 2.5 kHz and a Q-factor of 1.2 10**5. Upon launching 250 μW laser power at an optical frequency close to the WGM resonant frequency, we observed cooling of the nanospike resonance from room temperature down to 1.8 K. Simultaneous cooling of the first higher-order mechanical mode is also observed. The strong suppression of the overall Brownian motion of the nanospike, observed as an 11.6 dB reduction in its mean square displacement, indicates strong optomechanical stabilization of linear coupling between the nanospike and the cavity mode. The cooling is caused predominantly by a combination of photothermal effects and optical forces between nanospike and WGM resonator. The results are of direct relevance in the many applications of WGM resonators, including atom physics, optomechanics, and sensing.

physics.optics↗