arXiv subjects

Philip X. -L. Feng

Publications and source records attributed to Philip X. -L. Feng.

At least 19 recordsLinked to original sources

arXiv2026

Frequency Synchronization Circuit Model for Analog Vector-Matrix Multiplication in the Frequency Domain

This work introduces a frequency synchronization circuit model for analog vector-matrix multiplication in the frequency domain. The frequency synchronization is implemented by coupling oscillators through all-to-all connections. Each oscillator is implemented using complementary cross-coupled transconductance pairs and RC high-pass filters. In this work, the frequency synchronization is achieved not only using oscillators alone but also through a configuration in which oscillators and resonator models (i.e., MEMS/NEMS resonators) are combined. While addressing the frequency synchronization of all the coupled oscillators, a partial synchronization is also discussed by controlling the coupling strength of a selected subset of oscillators. This frequency synchronization analysis focuses on the small-signal analysis using analog circuit and resonator models, thereby enabling an understanding of the synchronized frequency defined by the parameters of the analog circuit and resonator models.

physics.ins-det↗

arXiv2026

Sideband-Resolved 4H-SiC Optomechanical Resonators with Interference-Engineered Anchor-Loss Suppression

Sideband-resolved cavity optomechanical resonators provide a powerful platform for coherent photon--phonon interactions, enabling applications ranging from quantum state transduction and optomechanically induced transparency to precision sensing and microwave photonics. Achieving this regime in integrated microresonators, however, requires simultaneously realizing a narrow optical cavity linewidth, a high-frequency mechanical mode, and low mechanical dissipation. Here, we report the first sideband-resolved optomechanical resonators based on the 4H silicon carbide (4H-SiC) platform. By combining compact microdisk geometries with interference-engineered anchor-loss suppression, we simultaneously achieve intrinsic optical quality factors exceeding $1\times10^6$, room-temperature mechanical quality factors up to $1.51\times10^4$, and a sideband-resolution factor greater than seven. Systematic numerical and experimental studies reveal that a local minimum in anchor loss enables high mechanical quality factors without requiring aggressive undercutting, substantially improving fabrication yield and device robustness. We further demonstrate the first observation of optomechanically induced transparency in integrated 4H-SiC resonators, confirming coherent cavity optomechanical interactions in this material platform. These results establish 4H-SiC as a promising platform for integrated cavity optomechanics and provide a practical route toward scalable photon--phonon devices for classical and quantum photonic technologies.

physics.optics↗

arXiv2025

Ultracompact 4H-silicon carbide optomechanical resonator with $f_m\cdot Q_m$ exceeding $10^{13}$ Hz

Silicon carbide (SiC) has great potential for optomechanical applications due to its outstanding optical and mechanical properties. However, challenges associated with SiC nanofabrication have constrained its adoption in optomechanical devices, as embodied by the considerable optical loss or lack of integrated optical access in existing mechanical resonators. In this work, we overcome such challenges and demonstrate a low-loss, ultracompact optomechanical resonator in an integrated 4H-SiC-on-insulator (4H-SiCOI) photonic platform for the first time. Based on a suspended $4.3$-$μ$m-radius microdisk, the SiC optomechanical resonator features low optical loss ($<1$ dB/cm), a high mechanical frequency $f_m$ of $0.95 \times 10^9$ Hz, a mechanical quality factor $Q_m$ of $1.92\times10^4$, and a footprint of $<1\times 10^{-5}$ mm$^2$. The corresponding $f_m\cdot Q_m$ product is estimated to be $1.82 \times 10^{13}$ Hz, which is among the highest reported values of optomechanical cavities tested in an ambient environment at room temperature. In addition, the strong optomechanical coupling in the SiC microdisk enables coherent regenerative optomechanical oscillations at a threshold optical dropped power of 14 $μ$W, which also supports efficient harmonic generation at increased power levels. With such competitive performance, we envision a range of chip-scale optomechanical applications to be enabled by the low-loss 4H-SiCOI platform.

physics.optics↗

arXiv2025

Lithium niobate acoustic resonators operating beyond 900 $^\circ$C

In this paper, fundamental shear-horizontal SH0 mode Leaky Surface Acoustic Wave (LSAW) resonators on X-cut lithium niobate leveraging dense and robust electrodes such as gold and tungsten are demonstrated for extreme temperature operation in harsh environments. A novel post-processing approach based on in-band spurious mode tracking is introduced to enable reliable characterization under extreme parasitic loading during testing. Devices exhibit stable performance throughout multiple thermal cycles up to 1000 $^\circ$C, with an extrapolated electromechanical coupling coefficient kt2 = 25% and loaded quality factor Qp = 12 at 1000 $^\circ$C for tungsten devices, and kt2 = 17%, Qp = 100 at 900 $^\circ$C for gold devices.

physics.app-ph↗

arXiv2025

Mechanical resonant sensing of spin texture dynamics in a two-dimensional antiferromagnet

The coupling between the spin degrees of freedom and macroscopic mechanical motions, including striction, shearing, and rotation, has attracted wide interest with applications in actuation, transduction, and information processing. Experiments so far have established the mechanical responses to the long-range ordered or isolated single spin states. However, it remains elusive whether mechanical motions can couple to a different type of magnetic structure, the non-collinear spin textures, which exhibit nanoscale spatial variations of spin (domain walls, skyrmions, etc.) and are promising candidates to realize high-speed computing devices. Here, we report the detection of collective spin texture dynamics with nanoelectromechanical resonators made of two-dimensional antiferromagnetic (AFM) MnPS3 with $10^{-9}$ strain sensitivity. By examining radio frequency mechanical oscillations under magnetic fields, new magnetic transitions were identified with sharp dips in resonant frequency. They are attributed to the collective AFM domain wall motions as supported by the analytical modeling of magnetostriction and large-scale spin-dynamics simulations. Additionally, an abnormally large modulation in the mechanical nonlinearity at the transition field infers a fluid-like response due to the ultrafast domain motion. Our work establishes a strong coupling between spin texture and mechanical dynamics, laying the foundation for electromechanical manipulation of spin texture and developing quantum hybrid devices.

cond-mat.mes-hall↗

arXiv2024

Aluminum Scandium Nitride as a Functional Material at 1000°C

Aluminum scandium nitride (AlScN) has emerged as a highly promising material for high-temperature applications due to its robust piezoelectric, ferroelectric, and dielectric properties. This study investigates the behavior of Al0.7Sc0.3N thin films in extreme thermal environments, demonstrating functional stability up to 1000°C, making it suitable for use in aerospace, hypersonics, deep-well, and nuclear reactor systems. Tantalum silicide (TaSi2)/Al0.7Sc0.3N/TaSi2 capacitors were fabricated and characterized across a wide temperature range, revealing robust ferroelectric and dielectric properties, along with significant enhancement in piezoelectric performance. At 1000°C, the ferroelectric hysteresis loops showed a substantial reduction in coercive field from 4.3 MV/cm to 1.2 MV/cm, while the longitudinal piezoelectric coefficient increased nearly tenfold, reaching 75.1 pm/V at 800°C. Structural analysis via scanning and transmission electron microscopy confirmed the integrity of the TaSi2/Al0.7Sc0.3N interfaces, even after exposure to extreme temperatures. Furthermore, the electromechanical coupling coefficient was calculated to increase by over 500%, from 12.9% at room temperature to 82% at 700°C. These findings establish AlScN as a versatile material for high-temperature ferroelectric, piezoelectric, and dielectric applications, offering unprecedented thermal stability and functional enhancement.

cond-mat.mtrl-sci↗

arXiv2024

Parametric Frequency Divider based Ising Machines

We report on a new class of Ising Machines (IMs) that rely on coupled parametric frequency dividers (PFDs) as macroscopic artificial spins. Unlike the IM counterparts based on subharmonic injection locking (SHIL), PFD IMs do not require strong injected continuous wave signals or applied DC voltages. Therefore, they show a significantly lower power consumption per spin compared to SHIL based IMs, making it feasible to accurately solve large scale combinatorial optimization problems (COPs) that are hard or even impossible to solve by using the current von Neumann computing architectures. Furthermore, using high quality (Q) factor resonators in the PFD design makes PFD IMs able to exhibit a nanoWatt level power per spin. Also, it remarkably allows a speed up of the phase synchronization among the PFDs, resulting in shorter time to solution and lower energy to solution despite the resonators' longer relaxation time. As a proof of concept, a 4 node PFD IM has been demonstrated. This IM correctly solves a set of MaxCut problems while consuming just 600 nanoWatts per spin. This power consumption is two orders of magnitude lower than the power per spin of state of the art SHIL based IMs operating at the same frequency.

physics.app-ph↗

arXiv2023

2D Magnetic Heterostructures: Spintronics and Quantum Future

The discovery of two-dimensional (2D) magnetism within atomically thin structures derived from layered crystals has opened up a new realm for exploring magnetic heterostructures. This emerging field provides a foundational platform for investigating unique physical properties and exquisite phenomena at the nanometer and molecular/atomic scales. By engineering 2D interfaces using physical methods and selecting interlayer interactions, we unlock the potential for extraordinary exchange dynamics. This potential extends to high-performance and high-density magnetic memory applications, as well as future advancements in neuromorphic and quantum computing. This review delves into recent advances in 2D magnets, elucidates the mechanisms behind 2D interfaces, and highlights the development of 2D devices for spintronics and quantum information. Particular focus is placed on 2D magnetic heterostructures with topological properties, promising for a resilient and low-error information system. Finally, we discuss the trends of 2D heterostructures for future electronics, considering the challenges and opportunities from physics, material synthesis, and technological prospective.

cond-mat.mes-hall↗

arXiv2022

Nanomechanical Resonators: Toward Atomic Scale

The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to new grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking features out of bulk materials such as silicon. With the flourishing multidisciplinary field of low-dimensional nanomaterials, including one-dimensional (1D) nanowires/nanotubes, and two-dimensional (2D) atomic layers such as graphene/phosphorene, growing interests and sustained efforts have been devoted to creating mechanical devices toward the ultimate limit of miniaturization--genuinely down to the molecular or even atomic scale. These ultrasmall movable structures, particularly nanomechanical resonators that exploit the vibratory motion in these 1D and 2D nano-to-atomic-scale structures, offer exceptional device-level attributes, such as ultralow mass, ultrawide frequency tuning range, broad dynamic range, and ultralow power consumption, thus holding strong promises for both fundamental studies and engineering applications. In this Review, we offer a comprehensive overview and summary of this vibrant field, present the state-of-the-art devices and evaluate their specifications and performance, outline important achievements, and postulate future directions for studying these miniscule yet intriguing molecular-scale machines.

cond-mat.mes-hall↗

arXiv2021

Young's Modulus and Corresponding Orientation in β-Ga2O3 Thin Films Resolved by Nanomechanical Resonators

We report on the non-destructive measurement of Young's modulus of thin-film single crystal beta gallium oxide (beta-Ga2O3) out of its nanoscale mechanical structures by measuring their fundamental mode resonance frequencies. From the measurements, we extract Young's modulus in (100) plane, EY,(100) = 261.4+/-20.6 GPa, for beta-Ga2O3 nanoflakes synthesized by low-pressure chemical vapor deposition (LPCVD), and Young's modulus in [010] direction, EY,[010] = 245.8+/-9.2 GPa, for beta-Ga2O3 nanobelts mechanically cleaved from bulk beta-Ga2O3 crystal grown by edge-defined film-fed growth (EFG) method. The Young's moduli extracted directly on nanomechanical resonant device platforms are comparable to theoretical values from first-principle calculations and experimentally extracted values from bulk crystal. This study yields important quantitative nanomechanical properties of beta-Ga2O3 crystals, and helps pave the way for further engineering of beta-Ga2O3 micro/nanoelectromechanical systems (M/NEMS) and transducers.

cond-mat.mtrl-sci↗

arXiv2021

Ultrawide Frequency Tuning of Atomic Layer van der Waals Heterostructure Electromechanical Resonators

We report on the experimental demonstration of atomically thin molybdenum disulfide (MoS2)-graphene van der Waals (vdW) heterostructure nanoelectromechanical resonators with ultrawide frequency tuning. With direct electrostatic gate tuning, these vdW resonators exhibit exceptional tunability, in general, Δf/f0 >200%, for continuously tuning the same device and the same mode (e.g., from ~23 to ~107MHz), up to Δf/f0 = 370%, the largest fractional tuning range in such resonators to date. This remarkable electromechanical resonance tuning is investigated by two different analytical models and finite element simulations. Further, we carefully perform clear control experiments and simulations to elucidate the difference in frequency tuning between heterostructure and single-material resonators. At a given initial strain level, the tuning range depends on the two-dimensional (2D) Young's moduli of the constitutive crystals; devices built on materials with lower 2D moduli show wider tuning ranges. This study exemplifies that vdW heterostructure resonators can retain unconventionally broad, continuous tuning, which is promising for voltage-controlled, tunable nanosystems.

cond-mat.mes-hall↗

arXiv2021

Cavity Quantum Electrodynamics Design with Single Photon Emitters in Hexagonal Boron Nitride

Hexagonal boron nitride (h-BN), a prevalent insulating crystal for dielectric and encapsulation layers in two-dimensional (2D) nanoelectronics and a structural material in 2D nanoelectromechanical systems (NEMS), has also rapidly emerged as a promising platform for quantum photonics with the recent discovery of optically active defect centers and associated spin states. Combined with measured emission characteristics, here we propose and numerically investigate the cavity quantum electrodynamics (cavity-QED) scheme incorporating these defect-enabled single photon emitters (SPEs) in h-BN microdisk resonators. The whispering-gallery nature of microdisks can support multiple families of cavity resonances with different radial and azimuthal mode indices simultaneously, overcoming the challenges in coinciding a single point defect with the maximum electric field of an optical mode both spatially and spectrally. The excellent characteristics of h-BN SPEs, including exceptional emission rate, considerably high Debye-Waller factor, and Fourier transform limited linewidth at room temperature, render strong coupling with the ratio of coupling to decay rates g/max(γ,\k{appa}) predicated as high as 500. This study not only provides insight into the emitter-cavity interaction, but also contributes toward realizing h-BN photonic components, such as low-threshold microcavity lasers and high-purity single photon sources, critical for linear optics quantum computing and quantum networking applications.

physics.optics↗

arXiv2021

Very High Interfacial Thermal Conductance in Fully hBN-Encapsulated MoS2 van der Waals Heterostructure

We report experimental and computational studies of thermal transport properties in hexagonal boron nitride (hBN) encapsulated molybdenum disulfide (MoS2) structure using refined optothermal Raman techniques, and reveal very high interfacial thermal conductance between hBN and MoS2. By studying the Raman shift of hBN and MoS2 in suspended and substrate-supported thin films under varying laser power and temperature, we calibrate lateral (in-plane) thermal conductivity of hBN and MoS2 and the vertical interfacial thermal conductance in the hBN/MoS2/hBN heterostructure as well as the interfaces between heterostructure and substrate. Crucially, we have found that interfacial thermal conductance between hBN and encapsulated MoS2 is 74MW/m2K and 72MW/m2K in supported and suspended films, respectively, which are significantly higher than interfacial thermal conductance between MoS2 and other substrates. Molecular dynamics (MD) computations conducted in parallel have shown consistent results. This work provides clear evidence of significantly efficient heat dissipation in hBN/MoS2/hBN heterostructures and sheds light on building novel hBN encapsulated nanoelectronics with efficient thermal management.

cond-mat.mes-hall↗

arXiv2020

Hexagonal Boron Nitride Phononic Crystal Waveguides

Hexagonal boron nitride (h-BN), one of the hallmark van der Waals (vdW) layered crystals with an ensemble of attractive physical properties, is playing increasingly important roles in exploring two-dimensional (2D) electronics, photonics, mechanics, and emerging quantum engineering. Here, we report on the demonstration of h-BN phononic crystal waveguides with designed pass and stop bands in the radio frequency (RF) range and controllable wave propagation and transmission, by harnessing arrays of coupled h-BN nanomechanical resonators with engineerable coupling strength. Experimental measurements validate that these phononic crystal waveguides confine and support 15 to 24 megahertz (MHz) wave propagation over 1.2 millimeters. Analogous to solid-state atomic crystal lattices, phononic bandgaps and dispersive behaviors have been observed and systematically investigated in the h-BN phononic waveguides. Guiding and manipulating acoustic waves on such additively integratable h-BN platform may facilitate multiphysical coupling and information transduction, and open up new opportunities for coherent on-chip signal processing and communication via emerging h-BN photonic and phononic devices.

cond-mat.mes-hall↗

arXiv2018

Ultrawide Band Gap β-Ga2O3 Nanomechanical Resonators with Spatially Visualized Multimode Motion

Beta gallium oxide (β-Ga2O3) is an emerging ultrawide band gap (4.5 - 4.9 eV) semiconductor with attractive properties for future power electronics, optoelectronics, and sensors for detecting gases and ultraviolet radiation. β-Ga2O3 thin films made by various methods are being actively studied toward such devices. Here, we report on the experimental demonstration of single-crystal β-Ga2O3 nanomechanical resonators using β-Ga2O3 nanoflakes grown via low-pressure chemical vapor deposition (LPCVD). By investigating β-Ga2O3 circular drumhead structures, we demonstrate multimode nanoresonators up to the 6th mode in high and very high frequency (HF / VHF) bands, and also realize spatial mapping and visualization of the multimode motion. These measurements reveal a Young's modulus of E_Y = 261 GPa and anisotropic biaxial built-in tension of 37.5 MPa and 107.5 MPa. We find that thermal annealing can considerably improve the resonance characteristics, including ~40% upshift in frequency and ~90% enhancement in quality (Q) factor. This study lays a foundation for future exploration and development of mechanically coupled and tunable β-Ga2O3 electronic, optoelectronic, and physical sensing devices.

physics.app-ph↗

arXiv2018

β-Ga2O3 NEMS Oscillator for Real-Time Middle Ultraviolet (MUV) Light Detection

We report on the first beta gallium oxide (β-Ga2O3) crystal feedback oscillator built by employing a vibrating β-Ga2O3 nanoresonator as the frequency reference for real-time middle ultraviolet (MUV) light detection. We fabricate suspended β-Ga2O3 nanodevices through synthesis of β-Ga2O3 nanoflakes using low-pressure chemical vapor deposition (LPCVD), and dry transfer of nanoflakes on microtrenches. Open-loop tests reveal a resonance of the β-Ga2O3 device at ~30 MHz. A closed-loop oscillator is then realized by using a combined optical-electrical feedback circuitry, to perform real-time resonant sensing of MUV irradiation. The oscillator exposed to cyclic MUV irradiation exhibits resonant frequency downshifts, with a measured responsivity of $\mathscr{R}$ = -3.1 Hz/pW and a minimum detectable power of δPmin = 0.53 nW for MUV detection.

physics.app-ph↗

arXiv2017

Atomic Layer MoS2-Graphene van der Waals Heterostructure Nanomechanical Resonators

Heterostructures play significant roles in modern semiconductor devices and micro/nanosystems in a plethora of applications in electronics, optoelectronics, and transducers. While state-of-the-art heterostructures often involve stacks of crystalline epi-layers each down to a few nanometers thick, the intriguing limit would be heterto-atomic-layer structures. Here we report the first experimental demonstration of freestanding van der Waals heterostructures and their functional nanomechanical devices. By stacking single-layer (1L) MoS2 on top of suspended single-, bi-, tri- and four-layer (1L to 4L) graphene sheets, we realize array of MoS2-graphene heterostructures with varying thickness and size. These heterostructures all exhibit robust nanomechanical resonances in the very high frequency (VHF) band (up to ~100 MHz). We observe that fundamental-mode resonance frequencies of the heterostructure devices fall between the values of graphene and MoS2 devices. Quality (Q) factors of heterostructure resonators are lower than those of graphene but comparable to those of MoS2 devices, suggesting interface damping related to interlayer interactions in the van der Waals heterostructures. This study validates suspended atomic layer heterostructures as an effective device platform and opens opportunities for exploiting mechanically coupled effects and interlayer interactions in such devices.

cond-mat.mes-hall↗

arXiv2016

Resolving and Tuning Mechanical Anisotropy in Black Phosphorus via Nanomechanical Multimode Resonance Spectromicroscopy

Black phosphorus (P) has emerged as a layered semiconductor with a unique crystal structure featuring corrugated atomic layers and strong in-plane anisotropy in its physical properties. Here, we demonstrate that the crystal orientation and mechanical anisotropy in free-standing black P thin layers can be precisely determined by spatially resolved multimode nanomechanical resonances. This offers a new means for resolving important crystal orientation and anisotropy in black P device platforms in situ beyond conventional optical and electrical calibration techniques. Furthermore, we show that electrostatic-gating-induced straining can continuously tune the mechanical anisotropic effects on multimode resonances in black P electromechanical devices. Combined with finite element modeling (FEM), we also determine the Young's moduli of multilayer black P to be 116.1 and 46.5 GPa in the zigzag and armchair directions, respectively.

cond-mat.mes-hall↗