Searcharxiv⌕ Search

arXiv subjects

Qiang Zhang

Publications and source records attributed to Qiang Zhang.

At least 559 records · Page 31Linked to original sources

Random number generation with cosmic photons

Random numbers are indispensable for a variety of applications ranging from testing physics foundation to information encryption. In particular, nonlocality tests provide a strong evidence to our current understanding of nature -- quantum mechanics. All the random number generators (RNG) used for the existing tests are constructed locally, making the test results vulnerable to the freedom-of-choice loophole. We report an experimental realization of RNGs based on the arrival time of cosmic photons. The measurement outcomes (raw data) pass the standard NIST statistical test suite. We present a realistic design to employ these RNGs in a Bell test experiment, which addresses the freedom-of-choice loophole.

quant-ph↗

Experimental measurement-device-independent quantum digital signatures over a metropolitan network

Quantum digital signatures (QDS) provide a means for signing electronic communications with informationtheoretic security. However, all previous demonstrations of quantum digital signatures assume trusted measurement devices. This renders them vulnerable against detector side-channel attacks, just like quantum key distribution. Here, we exploit a measurement-device-independent (MDI) quantum network, over a 200-square-kilometer metropolitan area, to perform a field test of a three-party measurement-device-independent quantum digital signature (MDI-QDS) scheme that is secure against any detector side-channel attack. In so doing, we are able to successfully sign a binary message with a security level of about 1E-7. Remarkably, our work demonstrates the feasibility of MDI-QDS for practical applications.

quant-ph↗

Theoretical studies of superconductivity in doped BaCoSO

We investigate superconductivity that may exist in the doped BaCoSO, a multi-orbital Mott insulator with a strong antiferromagnetic ground state. The superconductivity is studied in both t-J type and Hubbard type multi-orbital models by mean field approach and random phase approximation (RPA) analysis. Even if there is no C4 rotational symmetry, it is found that the system still carries a d-wave like pairing symmetry state with gapless nodes and sign changed superconducting order parameters on Fermi surfaces. The results are largely doping insensitive. In this superconducting state, the three t2g orbitals have very different superconducting form factors in momentum space. In particular, the intra-orbital pairing of the dx2-y2 orbital has a s-wave like pairing form factor. The two methods also predict very different pairing strength on different parts of Fermi surfaces.These results suggest that BaCoSO and related materials can be a new ground to test and establish fundamental principles for unconventional high temperature superconductivity.

cond-mat.supr-con↗

Sparse Representation based Multi-sensor Image Fusion: A Review

As a result of several successful applications in computer vision and image processing, sparse representation (SR) has attracted significant attention in multi-sensor image fusion. Unlike the traditional multiscale transforms (MSTs) that presume the basis functions, SR learns an over-complete dictionary from a set of training images for image fusion, and it achieves more stable and meaningful representations of the source images. By doing so, the SR-based fusion methods generally outperform the traditional MST-based image fusion methods in both subjective and objective tests. In addition, they are less susceptible to mis-registration among the source images, thus facilitating the practical applications. This survey paper proposes a systematic review of the SR-based multi-sensor image fusion literature, highlighting the pros and cons of each category of approaches. Specifically, we start by performing a theoretical investigation of the entire system from three key algorithmic aspects, (1) sparse representation models; (2) dictionary learning methods; and (3) activity levels and fusion rules. Subsequently, we show how the existing works address these scientific problems and design the appropriate fusion rules for each application, such as multi-focus image fusion and multi-modality (e.g., infrared and visible) image fusion. At last, we carry out some experiments to evaluate the impact of these three algorithmic components on the fusion performance when dealing with different applications. This article is expected to serve as a tutorial and source of reference for researchers preparing to enter the field or who desire to employ the sparse representation theory in other fields.

cs.CV↗

Magnetite nano-islands on silicon-carbide with graphene

X-ray magnetic circular dichroism (XMCD) measurements of iron nano-islands grown on graphene and covered with a Au film for passivation reveal that the oxidation through defects in the Au film spontaneously leads to the formation of magnetite nano-particles (i.e, $Fe_3$$O_4$). The Fe nano-islands (20 and 75 monolayers; MLs) are grown on epitaxial graphene formed by thermally annealing 6H-SiC(0001) and subsequently covered, in the growth chamber, with nominal 20 layers of Au. Our X-ray absorption spectroscopy and XMCD measurements at applied magnetic fields show that the thin film (20 ML) is totally converted to magnetite whereas the thicker film (75 ML) exhibits properties of magnetite but also those of pure metallic iron. Temperature dependence of the XMCD signal (of both samples) shows a clear transition at $T_{\rm V}\approx 120$ K consistent with the Verwey transition of bulk magnetite. These results have implications on the synthesis of magnetite nano-crystals and also on their regular arrangements on functional substrates such as graphene.

cond-mat.mes-hall↗

Experimental measurement-device-independent quantum random number generation

The randomness from a quantum random number generator (QRNG) relies on the accurate characterization of its devices. However, device imperfections and inaccurate characterizations can result in wrong entropy estimation and bias in practice, which highly affects the genuine randomness generation and may even induce the disappearance of quantum randomness in an extreme case. Here we experimentally demonstrate a measurement-device-independent (MDI) QRNG based on time-bin encoding to achieve certified quantum randomness even when the measurement devices are uncharacterized and untrusted. The MDI-QRNG is randomly switched between the regular randomness generation mode and a test mode, in which four quantum states are randomly prepared to perform measurement tomography in real-time. With a clock rate of 25 MHz, the MDI-QRNG generates a final random bit rate of 5.7 Kbps. Such implementation with an all-fiber setup provides an approach to construct a fully-integrated MDI-QRNG with trusted but error-prone devices in practice.

quant-ph↗

Ground test of satellite constellation based quantum communication

Satellite based quantum communication has been proven as a feasible way to achieve global scale quantum communication network. Very recently, a low-Earth-orbit (LEO) satellite has been launched for this purpose. However, with a single satellite, it takes an inefficient 3-day period to provide the worldwide connectivity. On the other hand, similar to how the Iridium system functions in classic communication, satellite constellation (SC) composed of many quantum satellites, could provide global real-time quantum communication. In such a SC, most of the satellites will work in sunlight. Unfortunately, none of previous ground testing experiments could be implemented at daytime. During daytime, the bright sunlight background prohibits quantum communication in transmission over long distances. In this letter, by choosing a working wavelength of 1550 nm and developing free-space single-mode fibre coupling technology and ultralow noise up-conversion single photon detectors, we overcome the noise due to sunlight and demonstrate a 53-km free space quantum key distribution (QKD) in the daytime through a 48-dB loss channel. Our system not only shows the feasibility of satellite based quantum communication in daylight, but also has the ability to naturally adapt to ground fibre optics, representing an essential step towards a SC-based global quantum network.

quant-ph↗

Revenue Maximizing Envy-Free Pricing in Matching Markets with Budgets

We study envy-free pricing mechanisms in matching markets with $m$ items and $n$ budget constrained buyers. Each buyer is interested in a subset of the items on sale, and she appraises at some single-value every item in her preference-set. Moreover, each buyer has a budget that constraints the maximum affordable payment, while she aims to obtain as many items as possible of her preference-set. Our goal is to compute an envy-free pricing allocation that maximizes the revenue, i.e., the total payment charged to the buyers. This pricing problem is hard to approximate better than $Ω({\rm min} \{n,m\}^{1/2-ε})$ for any $ε>0$, unless $P=NP$. The hardness result is due to the presence of the matching constraints given that the simpler multi-unit case can be approximated up to a constant factor of $2$. The goal of this paper is to circumvent the hardness result by restricting ourselves to specific settings of valuations and budgets. Two particularly significant scenarios are: each buyer has a budget that is greater than her single-value valuation, and each buyer has a budget that is lower than her single-value valuation. Surprisingly, in both scenarios we are able to achieve a $1/4$-approximation to the optimal envy-free revenue. The algorithms utilize a novel version of the Ausebel ascending price auction. These results may suggest that, although it is difficult to approximate the optimal revenue in general, ascending price auctions could achieve relatively good revenue in most of the practical settings.

cs.GT↗

Integrated four-channel all-fiber up-conversion single-photon-detector with adjustable efficiency and dark count

Up-conversion single photon detector (UCSPD) has been widely used in many research fields including quantum key distribution (QKD), lidar, optical time domain reflectrometry (OTDR) and deep space communication. For the first time in laboratory, we have developed an integrated four-channel all-fiber UCSPD which can work in both free-running and gate modes. This compact module can satisfy different experimental demands with adjustable detection efficiency and dark count. We have characterized the key parameters of the UCSPD system.

physics.ins-det↗

Brillouin optical time domain reflectometry for fast detection of dynamic strain incorporating double-edge technique

For the first time, a direct detection BOTDR is demonstrated for distributed dynamic strain sensing incorporating double-edge technique, time-division multiplexing technique and upconversion technique. The double edges are realized by using the transmission curve and reflection curve of an all-fiber Fabry-Perot interferometer (FPI). Benefiting from the low loss of the fiber at, the time-division multiplexing technique is performed to realize the double-edge technique by using only a single-channel FPI and only one piece of a detector. In order to detect the weak spontaneous Brillouin backscattering signal efficiently, a fiber-coupled upconversion detector is adopted to upconvert the backscattering signal at 1548.1 nm to 863 nm, which is detected by a Si-APD finally. In the experiment, dynamic strain disturbance up to 1.9mε over 1.5 km of polarization maintaining fiber is detected at a sampling rate of 30 Hz. An accuracy of 30με and spatial resolution of 0.6 m is realized.

physics.ins-det↗

Mechanism Design with Exchangeable Allocations

We investigate mechanism design without payments when agents have different types of preferences. Contrary to most settings in the literature where agents have the same preference, e.g. in the facility location games all agents would like to stay close to (or away from) the facility, we demonstrate the limitation of mechanism design without payments when agents have different preferences by introducing exchanging phases. We consider two types of exchanging phases. The first model is called central exchanges where the exchanges are performed by a central authority. The other model is called individual exchanges where agents exchange their outcomes by themselves. By using facility location games as an example, we provide a truthful mechanism that optimizes social welfare in central exchanges. We also provide a universally truthful randomized mechanism that achieves at least a half of the optimal social welfare in individual exchanges.

cs.GT↗

Band gap renormalization and work function tuning in MoSe2/hBN/Ru(0001) heterostructures

Here we report the successful growth of MoSe2 on single layer hexagonal boron nitride (hBN) on Ru(0001) substrate by using molecular beam epitaxy. We investigated the electronic structures of MoSe2 using scanning tunneling microscopy and spectroscopy. Surprisingly, we found that the quasi-particle gap of the MoSe2 on hBN/Ru is about 0.25 eV smaller than those on graphene or graphite substrates. We attribute this result to the strong interaction between hBN/Ru which causes residual metallic screening from the substrate. The surface of MoSe2 exhibits Moiré pattern that replicates the Moiré pattern of hBN/Ru. In addition, the electronic structure and the work function of MoSe2 are modulated electrostatically with an amplitude of ~ 0.13 eV. Most interestingly, this electrostatic modulation is spatially in phase with the Moiré pattern of hBN on Ru(0001) whose surface also exhibits a work function modulation of the same amplitude.

cond-mat.mtrl-sci↗

Experimental Quantum Digital Signature over 102 km

Quantum digital signature (QDS) is an approach to guarantee the nonrepudiation, unforgeability and transferability of a signature with the information-theoretical security. All previous experimental realizations of QDS relied on an unrealistic assumption of secure channels and the longest distance is only several kilometers. Here, we have experimentally demonstrated a recently proposed QDS protocol without any secure channel. Exploiting the decoy state modulation, we have successfully signed one bit message through up to 102 km optical fiber. Furthermore, we continuously run the system to sign the longer message "USTC" with 32 bit at the distance of 51 km. Our results pave the way towards the practical application of QDS.

quant-ph↗

Entanglement Swapping with Independent Sources over an Optical Fibre Network

Teleportation of an entangled state, known as entanglement swapping, plays an essential role in quantum communication and network.Here we report a field-test entanglement swapping experiment with two independent telecommunication band entangled photon-pair sources over the optical fibre network of Hefei city. The two sources are located at two nodes 12 km apart and the Bell-state measurement is performed in a third location which is connected to the two source nodes with 14.7 km and 10.6 km optical fibres. An average visibility of 79.9+/-4.8% is observed in our experiment, which is high enough to infer a violation of Bell inequality. With the entanglement swapping setup, we demonstrate a source independent quantum key distribution, which is also immune to any attack against detection in the measurement site.

quant-ph↗

Measurement device independent quantum key distribution over 404 km optical fibre

Quantum key distribution (QKD) can provide unconditional secure communication between two distant parties. Although the significance of QKD is undisputed, its feasibility has been questioned because of certain limitations in the practical application of real-life QKD systems. It is a common belief the lack of perfect single-photon source and the existence of detection loss will handicap the feasibility of QKD by creating security loopholes and distance limitations. The measurement device independent QKD (MDIQKD) with decoy-state method removes the security threats from both the imperfect single-photon source and the detection loss. Lengthening the distance and improving the key rate of QKD with such a superior method is thus the central issue in the practical application of QKD. Here, we report the results of MDIQKD over 404 km of ultralow-loss optical fibre and 311 km of standard optical fibre by employing an optimized four-intensity decoy-state method. This record-breaking implementation of MDIQKD method not only provides a new distance record for both MDIQKD and all types of QKD systems, more significantly, it achieves a distance that the traditional BB84 QKD would not be able to achieve with the same detection devices even with ideal single-phone sources. For the first time, our work demonstrates that with the MDIQKD method, imperfect devices can achieve better results than what ideal sources could have achieved. This work represents a significant step towards proving and developing a feasible long-distance QKD.

quant-ph↗

All-fiber upconversion high spectral resolution wind lidar using a Fabry-Perot interferometer

An all-fiber, micro-pulse and eye-safe high spectral resolution wind lidar (HSRWL) at 1550nm is proposed and demonstrated by using a pair of upconversion single-photon detectors and a fiber Fabry-Perot scanning interferometer (FFP-SI). In order to improve the optical detection efficiency, both the transmission spectrum and the reflection spectrum of the FFP-SI are used for spectral analyses of the aerosol backscatter and the reference laser pulse. The reference signal is tapped from the outgoing laser and served as a zero velocity indicator. The Doppler shift is retrieved from a frequency response function Q, which is defined as the ratio of difference of the transmitted signal and the reflected signal to their sum. Taking advantages of high signal-to-noise ratio of the detectors and high spectral resolution of the FFP-SI, the Q spectra of the aerosol backscatter are reconstructed along the line-of-sight (LOS) of the telescope. By applying a least squares fit procedure to the measured Q spectra, the center frequencies and the bandwidths are obtained simultaneously. And then the Doppler shifts are determined relative to the center frequency of the reference signal. To eliminate the influence of temperature fluctuations on the FFP-SI, the FFP-SI is cased in a chamber with temperature stability of 0.001 during the measurement. Continuous LOS wind observations are carried out on two days at Hefei (31.843 N, 117.265 E), China. In the meantime, LOS wind measurements from the HSRWL show good agreement with the results from an ultrasonic wind sensor (Vaisala windcap WMT52). Due to the computational expensive of the convolution operation of the Q function, an empirical method is adopted to evaluate the quality of the measurements. The standard deviation of the wind speed is 0.76 m/s at the 1.8 km. The standard deviation of the retrieved bandwidth variation is 2.07 MHz at the 1.8 km.

astro-ph.IM↗

Micro-pulse upconversion Doppler lidar for wind and visibility detection in the atmospheric boundary layer

For the first time, a versatile, eyesafe, compact and direct detection Doppler lidar is developed using upconversion single-photon detection method. An all-fiber and polarization maintaining architecture is realized to guarantee the high optical coupling efficiency and the system stability. Using integrated-optic components, the conservation of etendue of the optical receiver is achieved by manufacturing a fiber-coupled periodically poled Lithium niobate waveguide and an all-fiber Fabry-Perot interferometer (FPI). The so-called double-edge direct detection is implemented using a single-channel FPI and a single upconversion detector, incorporating time-division multiplexing method. The relative error of the system is lower than 0.1% over 9 weeks. To show the robust of the system, atmospheric wind and visibility over 48 hours are detected in the boundary layer. In the intercomparison experiments, lidar shows good agreement with the ultrasonic wind sensor (Vaisala windcap WMT52), with standard deviation of 1.04 m/s in speed and 12.3° in direction.

astro-ph.IM↗

Experimental quantum data locking

Classical correlation can be locked via quantum means--quantum data locking. With a short secret key, one can lock an exponentially large amount of information, in order to make it inaccessible to unauthorized users without the key. Quantum data locking presents a resource-efficient alternative to one-time pad encryption which requires a key no shorter than the message. We report experimental demonstrations of quantum data locking scheme originally proposed by DiVincenzo et al. [Phys. Rev. Lett. 92, 067902 (2004)] and a loss-tolerant scheme developed by Fawzi, Hayde, and Sen [J. ACM. 60, 44 (2013)]. We observe that the unlocked amount of information is larger than the key size in both experiments, exhibiting strong violation of the incremental proportionality property of classical information theory. As an application example, we show the successful transmission of a photo over a lossy channel with quantum data (un)locking and error correction.

quant-ph↗