arXiv subjects

Qing-Bo Yan

Publications and source records attributed to Qing-Bo Yan.

31 records · Page 2Linked to original sources

arXiv2015

Highly efficient light management for perovskite solar cells

Organic-inorganic halide perovskite solar cells have enormous potential to impact the existing photovoltaic industry. As realizing a higher conversion efficiency of the solar cell is still the most crucial task, a great number of schemes were proposed to minimize the carrier loss by optimizing the electrical properties of the perovskite solar cells. Here, we focus on another significant aspect that is to minimize the light loss by optimizing the light management to gain a high efficiency for perovskite solar cells. In our scheme, the slotted and inverted prism structured SiO2 layers are adopted to trap more light into the solar cells, and a better transparent conducting oxide layer is employed to reduce the parasitic absorption. For such an implementation, the efficiency and the serviceable angle of the perovskite solar cell can be promoted impressively. This proposal would shed new light on developing the high-performance perovskite solar cells.

physics.optics↗

arXiv2015

Anisotropic intrinsic lattice thermal conductivity of phosphorene from first principles

Phosphorene, the single layer counterpart of black phosphorus, is a novel two-dimensional semiconductor with high carrier mobility and a large fundamental direct band gap, which has attracted tremendous interest recently. Its potential applications in nano-electronics and thermoelectrics call for a fundamental study of the phonon transport. Here, we calculate the intrinsic lattice thermal conductivity of phosphorene by solving the phonon Boltzmann transport equation (BTE) based on first-principles calculations. The thermal conductivity of phosphorene at $300\,\mathrm{K}$ is $30.15\,\mathrm{Wm^{-1}K^{-1}}$ (zigzag) and $13.65\,\mathrm{Wm^{-1}K^{-1}}$ (armchair), showing an obvious anisotropy along different directions. The calculated thermal conductivity fits perfectly to the inverse relation with temperature when the temperature is higher than Debye temperature ($Θ_D = 278.66\,\mathrm{K}$). In comparison to graphene, the minor contribution around $5\%$ of the ZA mode is responsible for the low thermal conductivity of phosphorene. In addition, the representative mean free path (MFP), a critical size for phonon transport, is also obtained.

cond-mat.mtrl-sci↗

arXiv2014

Hinge-like structure induced unusual properties of black phosphorus and new strategies to improve the thermoelectric performance

We systematically investigated the geometric, electronic and thermoelectric (TE) properties of bulk black phosphorus (BP) under strain. The hinge-like structure of BP brings unusual mechanical responses such as anisotropic Young's modulus and negative Poisson's ratio. A sensitive electronic structure of BP makes it transform among metal, direct and indirect semiconductors under strain. The maximal figure of merit $ZT$ of BP is found to be 0.72 at $800\,\mathrm{K}$ that could be enhanced to 0.87 by exerting an appropriate strain, revealing BP could be a potential medium-high temperature TE material. Such strain-induced enhancements of TE performance are often observed to occur at the boundary of the direct-indirect band gap transition, which can be attributed to the increase of degeneracy of energy valleys at the transition point. By comparing the structure of BP with SnSe, a family of potential TE materials with hinge-like structure are suggested. This study not only exposes various novel properties of BP under strain, but also proposes effective strategies to seek for better TE materials.

cond-mat.mtrl-sci↗

arXiv2013

Superstructures of Cubic and Hexagonal Diamonds Comprising a Family of Novel $sp^3$ Superhard Carbon Allotropes

Superstructures of cubic and hexagonal diamonds (h- and c-diamond) comprising a family of stable diamond-like $sp^3$ hybridized novel carbon allotropes are proposed, which are referred to as U$_n$-carbon where $n \geq 2$ denotes the number of structural layers in a unit cell. The conventional h- and c-diamond are included in this family as members with $n=2$ and 3, respectively. U$_n$-carbon ($n=4-6$), which are unveiled energetically and thermodynamically more stable than h-diamond and possess remarkable kinetic stabilities, are shown to be insulators with indirect gaps of $5.6 \sim 5.8$ eV, densities of $ 3.5 \sim 3.6$ g/cm$^3$, bulk modulus of $4.3 \sim 4.4 \times 10^{2}$ GPa, and Vickers hardness of $92.9 \sim 97.5$ GPa even harder than h- and c-diamond. The simulated x-ray diffraction and Raman spectra are presented for experimental characterization. These new structures of carbon would have a compelling impact in physics, chemistry, materials science and geophysics.

cond-mat.mtrl-sci↗

arXiv2013

Electronic and magnetic properties of twisted graphene nanoribbon and Möbius strips: first-principles calculations

The geometrical, electronic, and magnetic properties of twisted zigzag-edged graphene nanoribbons (ZGNRs) and novel graphene Möbius strips (GMS) are systematically investigated using first-principles density functional calculations. The structures of ZGNRs and GMS are optimized, and their stabilities are examined. The molecular energy levels and the spin polarized density of states are calculated. It is found that for twisted ZGNRs, the atomic bonding energy decreases quadratically with the increase of the twisted angle, and the HOMO-LUMO gap are varying in a sine-like behavior with the twisted angle. The calculated spin densities reveal that the ZGNRs and GMS have antiferromagnetic ground states, which persist during the twisting. The spin flips on the zigzag edges of GMS are observed at some positions.

cond-mat.mtrl-sci↗

arXiv2012

Strain-induced Dirac cone-like electronic structures and semiconductor-semimetal transition in graphdiyne

By means of the first-principles calculations combined with the tight-binding approximation, the strain-induced semiconductor-semimetal transition in graphdiyne is discovered. It is shown that the band gap of graphdiyne increases from 0.47 eV to 1.39 eV with increasing the biaxial tensile strain, while the band gap decreases from 0.47 eV to nearly zero with increasing the uniaxial tensile strain, and Dirac cone-like electronic structures are observed. The uniaxial strain-induced changes of the electronic structures of graphdiyne come from the breaking of geometrical symmetry that lifts the degeneracy of energy bands. The properties of graphdiyne under strains are disclosed different remarkably from that of graphene.

cond-mat.mtrl-sci↗

arXiv2012

Octagraphene as a Versatile Carbon Atomic Sheet for Novel Nanotubes, Unconventional Fullerenes and Hydrogen Storage

We study a versatile structurally favorable periodic $sp^2$-bonded carbon atomic planar sheet with $C_{4v}$ symmetry by means of the first-principles calculations. This carbon allotrope is composed of carbon octagons and squares with two bond lengths and is thus dubbed as octagraphene. It is a semimetal with the Fermi surface consisting of one hole and one electron pocket, whose low-energy physics can be well described by a tight-binding model of $π$-electrons. Its Young's modulus, breaking strength and Poisson's ratio are obtained to be 306 $N/m$, 34.4 $N/m$ and 0.13, respectively, which are close to those of graphene. The novel sawtooth and armchair carbon nanotubes as well as unconventional fullerenes can also be constructed from octagraphene. It is found that the Ti-absorbed octagraphene can be allowed for hydrogen storage with capacity around 7.76 wt%.

cond-mat.mtrl-sci↗

arXiv2011

T-Carbon: A Novel Carbon Allotrope

A structurally stable crystalline carbon allotrope is predicted by means of the first-principles calculations. This allotrope can be derived by substituting each atom in diamond with a carbon tetrahedron, and possesses the same space group Fd^1 3m as diamond, which is thus coined as T- carbon. The calculations on geometrical, vibrational and electronic properties reveal that T-carbon, with a considerable structural stability and a much lower density 1.50 g/cm3, is a semiconductor with a direct band gap about 3.0 eV, and has a Vickers hardness 61.1 GPa lower than diamond but comparable with cubic boron nitride. Such a form of carbon, once obtained, would have wide applications in photocatalysis, adsoption, hydrogen storage and aerospace materials.

cond-mat.mtrl-sci↗

arXiv2009

Family of boron fullerenes: general constructing schemes, electron counting rule and ab initio calculations

A set of general constructing schemes is unveiled to predict a large family of stable boron monoelemental, hollow fullerenes with magic numbers 32+8k (k>=0). The remarkable stabilities of these new boron fullerenes are then studied by intense ab initio calculations. An electron counting rule as well as an isolated hollow rule are proposed to readily show the high stability and the electronic bonding property, which are also revealed applicable to a number of newly predicted boron sheets and nanotubes.

cond-mat.mtrl-sci↗

arXiv2009

Half-Metallic Silicon Nanowires: Multiple Surface Dangling Bonds and Nonmagnetic Doping

By means of first-principles density functional theory calculations, we find that hydrogen-passivated ultrathin silicon nanowires (SiNWs) along [100] direction with symmetrical multiple surface dangling bonds (SDBs) and boron doping can have a half-metallic ground state with 100% spin polarization, where the half-metallicity is shown quite robust against external electric fields. Under the circumstances with various SDBs, the H-passivated SiNWs can also be ferromagnetic or antiferromagnetic semiconductors. The present study not only offers a possible route to engineer half-metallic SiNWs without containing magnetic atoms but also sheds light on manipulating spin-dependent properties of nanowires through surface passivation.

cond-mat.mtrl-sci↗

arXiv2008

Face-Centered-Cubic B$_{80}$ Metal: Density functional theory calculations

By means of ab initio calculations within the density functional theory, we have found that B80 fullerenes can condense to form stable face-centered-cubic fcc solids. It is shown that when forming a crystal, B80 cages are geometrically distorted, the Ih symmetry is lowered to Th, and four boron-boron chemical bonds are formed between every two nearest neighbor B80 cages. The cohesive energy of B80 fcc solid is 0.23 eV/atom with respect to the isolated B80 fullerene. The calculated electronic structure reveals that the fcc B80 solid is a metal. The predicted solid phase would constitute a form of pure boron and might have diverse implications. In addition, a simple electron counting rule is proposed, which could explain the stability of B80 fullerene and the recently predicted stable boron sheet.

cond-mat.mtrl-sci↗

arXiv2008

Structures, Electronic Properties, Spectroscopies and Hexagonal Monolayer Phase of a Family of Unconventional Fullerenes C64X4 (X = H; F;Cl;Br)

A systematic first-principles study within density functional theory on the geometrical structures and electronic properties of unconventional fullerene C64 and its derivatives C64X4 (X = H; F;Cl;Br) has been performed. By searching through all 3465 isomers of C64, the ground state of C64 is found to be spherical shape with D2 symmetry, which differs from the parent cage of the recently synthesized C64H4 that is pear-shaped with C3v symmetry. We found that the addition of the halogen atoms like F;Cl;Br to the pentagon-pentagon fusion vertex of C64 cage could enhance the stability, forming the unconventional fullerenes C64X4. The Mulliken charge populations, LUMO-HOMO gap energies and density of states are calculated, showing that different halogen atoms added to C64 will cause remarkably different charge populations of the C64X4 molecule; the chemical deriving could enlarge the energy gaps and affect the electronic structures distinctly. It is unveiled that C64F4 is even more stable than C64H4, as the C-X bond energy of the former is higher than that of the latter. The computed spectra of C64H4 molecules agree well with the experimental data; the IR, Raman, NMR spectra of C64X4 (X = F;Cl;Br) are also calculated to stimulate further experimental investigations. Finally, it is uncovered by total energy calculations that C64X4 could form a stable hexagonal monolayer.

cond-mat.mtrl-sci↗

arXiv2006

Crystalline and Electronic Structures of Molecular Solid C$_{50}$Cl$% _{10}$: First-Principles Calculation

A molecular solid C$_{50}$Cl$_{10}$ with possible crystalline structures, including the hexagonal-close-packed (hcp) phase, the face-centered cubic (fcc) phase, and a hexagonal monolayer, is predicted in terms of first-principles calculation within the density functional theory. The stable structures are determined from the total-energy calculations, where the hcp phase is uncovered more stable than the fcc phase and the hexagonal monolayer in energy per molecule. The energy bands and density of states for hcp and fcc C$_{50}$Cl$_{10}$ are presented. The results show that C$_{50}$Cl% $_{10}$ molecules can form either a hcp or fcc indirect-gap band insulator or an insulating hexagonal monolayer.

cond-mat.mtrl-sci↗