SearcharxivSearch

arXiv subjects

Qing-Bo Yan

Publications and source records attributed to Qing-Bo Yan.

At least 19 recordsLinked to original sources

Magnon Damping Minimum and Logarithmic Scaling in a Kondo-Heisenberg Model

Recently, an anomalous temperature evolution of spin wave excitations has been observed in a van der Waals metallic ferromagnet Fe$_3$GeTe$_2$ (FGT) [S. Bao, et al., Phys. Rev. X 12, 011022 (2022)], whose theoretical understanding yet remains elusive. Here we study the spin dynamics of a ferromagnetic Kondo-Heisenberg lattice model at finite temperature, and propose a mechanism of magnon damping that explains the intriguing experimental results. In particular, we find the magnon damping rate $\gamma(T)$ firstly decreases as temperature lowers, due to the reduced magnon-magnon scatterings. It then reaches a minimum at $T_{\rm d}^*$, and rises up again following a logarithmic scaling $\gamma(T) \sim \ln{(T_0/T)}$ (with $T_0$ a constant) for $T < T_{\rm d}^*$, which can be attributed to electron-magnon scatterings of spin-flip type. Moreover, we obtain the phase diagram containing the ferromagnetic and Kondo insulator phases by varying the Kondo coupling, which may be relevant for experiments on pressured FGT. The presence of a magnon damping minimum and logarithmic scaling at low temperature indicates the emergence of the Kondo effect reflected in the collective excitations of local moments in a Kondo lattice system.

cond-mat.str-el

Observation of a 1/3 Magnetisation Plateau Phase as Evidence for the Kitaev Interaction in a Honeycomb-Lattice Antiferromagnet

Fractional magnetisation plateaus, in which the magnetisation is pinned at a fraction of its saturated value within a range of external magnetic field, are spectacular macroscopic manifestations of the collective quantum behaviours. One prominent example of the plateau phase is found in spin-1/2 triangular-lattice antiferromagnets featuring strong geometrical frustration, and is often interpreted as quantum-fluctuation-stabilised state in magnetic field via the "order-by-disorder" mechanism. Here, we observe an unprecedented 1/3 magnetisation plateau between 5.2 and 7.4 T at 2 K in a spin-1 antiferromagnet Na$_3$Ni$_2$BiO$_6$ with a honeycomb lattice, where conventionally no geometrical frustration is anticipated. By carrying out elastic neutron scattering measurements, we propose the spin structure of the plateau phase to be an unusual partial spin-flop ferrimagnetic order, transitioning from the zigzag antiferromagnetic order in zero field. Our theoretical calculations show that the plateau phase is stabilised by the bond-anisotropic Kitaev interaction. These results provide a new paradigm for the exploration of rich quantum phases in frustrated magnets and exotic Kitaev physics in high-spin systems.

cond-mat.str-el

Plaquette Singlet Transition, Magnetic Barocaloric Effect, and Spin Supersolidity in the Shastry-Sutherland Model

Inspired by recent experimental measurements [Guo \textit{et al.}, Phys. Rev. Lett.~\textbf{124}, 206602 (2020); Jiménez \textit{et al.}, Nature \textbf{592}, 370 (2021)] on frustrated quantum magnet SrCu$_2$(BO$_3$)$_2$ under combined pressure and magnetic fields, we study the related spin-$1/2$ Shastry-Sutherland (SS) model using state-of-the-art tensor network methods. By calculating thermodynamics, correlations and susceptibilities, we find, in zero magnetic field, not only a line of first-order plaquette-singlet (PS) to dimer-singlet phase transition ending with a critical point, but also signatures of the ordered PS transition with its critical endpoint terminating on this first-order line. Moreover, we uncover prominent magnetic barocaloric responses, a novel type of quantum correlation induced cooling effect, in the strongly fluctuating supercritical regime. Under finite fields, we identify a quantum phase transition from the PS phase to the spin supersolid phase that breaks simultaneously lattice translational and spin rotational symmetries. The present findings on the SS model are accessible in current experiments and would shed new light on exotic critical and supercritical phenomena in archetypal frustrated quantum magnets.

cond-mat.str-el

Controllable spin splitting in 2D Ferroelectric few-layer ${$γ}$-GeSe

$γ$-GeSe is a new type of layered bulk material that was recently successfully synthesized. By means of density functional theory first-principles calculations, we systematically studied the physical properties of two-dimensional (2D) few-layer $γ$-GeSe. It is found that few-layer $γ$-GeSe are semiconductors with band gaps decreasing with increasing layer number; and 2D $γ$-GeSe with layer number $n \geq 2$ are ferroelectric with rather low transition barriers, consistent with the sliding ferroelectric mechanism. Particularly, spin-orbit coupling induced spin splitting is observed at the top of the valence band, which can be switched by the ferroelectric reversal; furthermore, their negative piezoelectricity also enables the regulation of spin splitting by strain. Finally, excellent optical absorption was also revealed. These intriguing properties make 2D few-layer $γ$-GeSe promising in spintronic and optoelectric applications.

cond-mat.mtrl-sci

High-Efficient ab initio Bayesian Active Learning Method and Applications in Prediction of Two-dimensional Functional Materials

Beyond the conventional trial-and-error method, machine learning offers a great opportunity to accelerate the discovery of functional materials, but still often suffers from difficulties such as limited materials data and unbalanced distribution of target property. Here, we propose the ab initio Bayesian active learning method that combines active learning and high-throughput ab initio calculations to accelerate prediction of desired functional materials with the ultrahigh efficiency and accuracy. We apply it as an instance to a large family (3,119) of two-dimensional hexagonal binary compounds with unbalanced materials property, and accurately screen out the materials with maximal electric polarization and proper photovoltaic band gaps, respectively, whereas the computational costs are significantly reduced by only calculating a few tenths of possible candidates in comparison to the random search. This approach shows enormous advantages for the cases with unbalanced distributions of target property. It can be readily applied to seek for a broad range of advanced materials.

cond-mat.mtrl-sci

The atlas of ferroicity in two dimensional MGeX3 family: room-temperature ferromagnetic half metals and unexpected ferroelectricity and ferroelasticity

Two-dimensional (2D) ferromagnetic and ferroelectric materials attract unprecedented attention due to the spontaneous-symmetry-breaking induced novel properties and multifarious potential applications. Here we systematically investigate a large family (148) of 2D MGeX3 (M = metal elements, X = O/S/Se/Te) by means of the high-throughput first-principles calculations, and focus on their possible ferroic properties including ferromagnetism, ferroelectricity, and ferroelasticity. We discover eight stable 2D ferromagnets including five semiconductors and three half-metals, 21 2D antiferromagnets, and 11 stable 2D ferroelectric semiconductors including two multiferroic materials. Particularly, MnGeSe3 and MnGeTe3 are predicted to be room-temperature 2D ferromagnetic half metals with Tc of 490 and 308 K, respectively. It is probably for the first time that ferroelectricity is uncovered in 2D MGeX3 family, which derives from the spontaneous symmetry breaking induced by unexpected displacements of Ge-Ge atomic pairs, and we also reveal that the electric polarizations are in proportion to the ratio of electronegativity of X and M atoms, and IVB group metal elements are highly favored for 2D ferroelectricity. Magnetic tunnel junction and water-splitting photocatalyst based on 2D ferroic MGeX3 are proposed as examples of wide potential applications. The atlas of ferroicity in 2D MGeX3 materials will spur great interest in experimental studies and would lead to diverse applications.

cond-mat.mtrl-sci

Calculated Effects of Vacancy and Ti-doping in 2D Janus MoSSe for Photocatalysis

Two-dimensional (2D) Janus transitional metal dichalcogenides (TMDCs) have great potential for photocatalytic water splitting due to their novel properties induced by the unique out-of-plane asymmetric structures. Here, we systematically investigate the geometric, electronic and optical properties of 2D Janus MoSSe with titanium doping and vacancies to explore their synergistic effects on photocatalytic activity. We find that there are effective attractions between the substituted or adsorbed Ti atoms and S/Se vacancies. The Ti adatoms dramatically extend the light absorption range to infrared region. The S/Se vacancies coexisting with Ti adatoms will modulate the transition of photo-excited electrons, thereby enhancing the sunlight absorption. The Ti adatoms either existing alone or coexisting with vacancies introduce smaller lattice distortion compared to substituted Ti atoms and these Ti adatoms induce smaller effective mass of charge carriers. The configuration of S vacancy coexisting with Ti adatoms on Se-surface exhibits the most significant synergistic effects and best overall photocatalytic performance. Our work reveals the mechanism and effects induced by doping and vacancies coexisting in 2D Janus TMDCs, also propose a new practical strategy to improve the performance of 2D photocatalysts.

cond-mat.mtrl-sci

Voting Data-Driven Regression Learning for Discovery of Functional Materials and Applications to Two-Dimensional Ferroelectric Materials

Regression machine learning is widely applied to predict various materials. However, insufficient materials data usually leads to a poor performance. Here, we develop a new voting data-driven method that could generally improve the performance of regression learning model for accurately predicting properties of materials. We apply it to investigate a large family (2135) of two-dimensional hexagonal binary compounds focusing on ferroelectric properties and find that the performance of the model for electric polarization is indeed greatly improved, where 38 stable ferroelectrics with out-of-plane polarization including 31 metals and 7 semiconductors are screened out. By an unsupervised learning, actionable information such as how the number and orbital radius of valence electrons, ionic polarizability, and electronegativity of constituent atoms affect polarization was extracted. Our voting data-driven method not only reduces the size of materials data for constructing a reliable learning model but also enables to make precise predictions for targeted functional materials.

cond-mat.mtrl-sci

Large Family of Two-Dimensional Ferroelectric Metals Discovered via Machine Learning

Ferroelectricity and metallicity are usually believed not to coexist because conducting electrons would screen out static internal electric fields. In 1965, Anderson and Blount proposed the concept of 'ferroelectric metal', however, it is only until recently that very rare ferroelectric metals were reported. Here, by combining high-throughput ab initio calculations and data-driven machine learning method with new electronic orbital based descriptors, we systematically investigated a large family (2,964) of two-dimensional (2D) bimetal phosphates, and discovered 60 stable ferroelectrics with out-of-plane polarization, including 16 ferroelectric metals and 44 ferroelectric semiconductors that contain seven multiferroics. The ferroelectricity origins from spontaneous symmetry breaking induced by the opposite displacements of bimetal atoms, and the full-d-orbital coinage metal elements cause larger displacements and polarization than other elements. For 2D ferroelectric metals, the odd electrons per unit cell without spin polarization may lead to a half-filled energy band around Fermi level and is responsible for the metallicity. It is revealed that the conducting electrons mainly move on a single-side surface of the 2D layer, while both the ionic and electric contributions to polarization come from the other side and are vertical to the above layer, thereby causing the coexistence of metallicity and ferroelectricity. Van der Waals heterostructures based on ferroelectric metals may enable the change of Schottky barrier height or the Schottky-Ohmic contact type and induce a dramatic change of their vertical transport properties. Our work greatly expands the family of 2D ferroelectric metals and will spur further exploration of 2D ferroelectric metals.

cond-mat.mtrl-sci

Tinselenidene: a Two-dimensional Auxetic Material with Ultralow Lattice Thermal Conductivity and Ultrahigh Hole Mobility

By means of extensive ab initio calculations, a new two-dimensional (2D) atomic material tin selenide monolayer (coined as tinselenidene) is predicted to be a semiconductor with an indirect gap (1.45 eV) and a high hole mobility (of order 10000 cm2V-1S-1), and will bear an indirect-direct gap transition under a rather low strain (<0.5 GPa). Tinselenidene has a very small Young's modulus (20-40 GPa) and an ultralow lattice thermal conductivity (<3 Wm-1K-1 at 300 K), making it probably the most flexible and most heat-insulating material in known 2D atomic materials. In addition, tinseleniden has a large negative Poisson's ratio of -0.17, thus could act as a 2D auxetic material. With these intriguing properties, tinselenidene could have wide potential applications in thermoelectrics, nanomechanics and optoelectronics.

cond-mat.mtrl-sci

Toward understanding physical origin of 2175Å extinction bump in interstellar medium

The 2175 Å ultraviolet (UV) extinction bump in interstellar medium (ISM) of the Milky Way was discovered in 1965. After intensive exploration of more than a half century, however, its exact origin still remains a big conundrum that is being debated. Here we propose a mixture model by which the extinction bump in ISM is argued possibly relevant to the clusters of hydrogenated T-carbon (HTC) molecules (C40H16) that have intrinsically a sharp absorption peak at the wavelength 2175 Å. By linearly combining the calculated absorption spectra of HTC mixtures, graphite, MgSiO3 and Fe2SiO4, we show that the UV extinction curves of optional six stars can be nicely fitted. This present work poses an alternative explanation toward understanding the physical origin of the 2175 Å extinction bump in ISM of the Milky Way.

astro-ph.GA

Accelerated Discovery of Two-Dimensional Optoelectronic Octahedral Oxyhalides via High-Throughput Ab Initio Calculations and Machine Learning

Traditional trial-and-error methods are obstacles for large-scale searching of new optoelectronic materials. Here, we introduce a method combining high-throughput ab initio calculations and machine-learning approaches to predict two-dimensional octahedral oxyhalides with improved optoelectronic properties. We develop an effective machine-learning model based on an expansive dataset generated from density functional calculations including the geometric and electronic properties of 300 two-dimensional octahedral oxyhalides. Our model accelerates the screening of potential optoelectronic materials of 5,000 two-dimensional octahedral oxyhalides. The distorted stacked octahedral factors proposed in our model play essential roles in the machine-learning prediction. Several potential two-dimensional optoelectronic octahedral oxyhalides with moderate band gaps, high electron mobilities, and ultrahigh absorbance coefficients are successfully hypothesized.

cond-mat.mtrl-sci

Carboneyane: A nodal line topological carbon with sp-sp2-sp3 chemical bonds

A structurally stable carbon allotrope with plentiful topological properties is predicted by means of first-principles calculations. This novel carbon allotrope possesses the simple space group C2/m, and contains simultaneously sp, sp2 and sp3 hybridized bonds in one structure, which is thus coined as carboneyane. The calculations on geometrical, vibrational, and electronic properties reveal that carboneyane, with good ductility and a much lower density 1.43 g/cm3, is a topological metal with a pair of nodal lines traversing the whole Brillouin zone, such that they can only be annihilated in a pair when symmetry is preserved. The symmetry and topological protections of the nodal lines as well as the associated surface states are discussed. By comparing its x-ray diffraction pattern with experimental results, we find that three peaks of carboneyane meet with the detonation soot. On account of the fluffy structure, carboneyane is shown to have potential applications in areas of storage, adsorption and electrode materials.

cond-mat.mtrl-sci

Molecular monolayer stabilizer for multilayer 2D materials

2D van der Waals materials have rich and unique functional properties, but many are susceptible to corrosion under ambient conditions. Here we show that linear alkylamines are highly effective in protecting the optoelectronic properties of these materials such as black phosphorous (BP) and transitional metal dichalcogenides. As a representative example, n-hexylamine can be applied in the form of thin molecular monolayers on BP flakes with less-than-2nm thickness and can prolong BP's lifetime from a few hours to several weeks and even months in ambient environments. Characterizations combined with our theoretical analysis show that the thin monolayers selectively sift out water molecules, forming a drying layer to achieve the passivation of the protected 2D materials. The monolayer coating is also stable in air, hydrogen annealing, and organic solvents, but can be removed by certain organic acids.

physics.app-ph

Exploring T-carbon for Energy Applications

Seeking for next-generation energy sources that are economic, sustainable (renewable), clean (environment-friendly), and abundant in earth is crucial when facing the challenges of energy crisis. There have been numerous studies exploring the possibility of carbon based materials to be utilized in future energy applications. In this paper, we introduce T-carbon, which is a theoretically predicted but recently experimentally synthesized carbon allotrope, as a promising material for next-generation energy applications. It is shown that T-carbon can be potentially used in thermoelectrics, hydrogen storage, lithium ion batteries, \emph{etc}. The challenges, opportunities, and possible directions for future studies of energy applications of T-carbon are also addressed. With the development of more environment-friendly technologies, the promising applications of T-carbon in energy fields would not only produce scientifically significant impact in related fields but also lead to a number of industrial and technical applications.

cond-mat.mtrl-sci

Competing dynamics of single phosphorus dopant in graphene with electron irradiation

Atomic-level structural changes in materials are important but challenging to study. Here, we demonstrate the dynamics and the possibility of manipulating a phosphorus dopant atom in graphene using scanning transmission electron microscopy (STEM). The mechanisms of various processes are explored and compared with those of other dopant species by first-principles calculations. This work paves the way for designing a more precise and optimized protocol for atomic engineering.

cond-mat.mtrl-sci

Diverse anisotropy of phonon transport in two-dimensional IV-VI compounds: A comparative study

New classes two-dimensional (2D) materials beyond graphene, including layered and non-layered, and their heterostructures, are currently attracting increasing interest due to their promising applications in nanoelectronics, optoelectronics and clean energy, where thermal transport property is one of the fundamental physical parameters. In this paper, we systematically investigated the phonon transport properties of 2D orthorhombic group IV-VI compounds of $GeS$, $GeSe$, $SnS$ and $SnSe$ by solving the Boltzmann transport equation (BTE) based on first-principles calculations. Despite the similar puckered (hinge-like) structure along the armchair direction as phosphorene, the four monolayer compounds possess diverse anisotropic properties in many aspects, such as phonon group velocity, Young's modulus and lattice thermal conductivity ($κ$), etc. Especially, the $κ$ along the zigzag and armchair directions of monolayer $GeS$ shows the strongest anisotropy while monolayer $SnS$ and $SnSe$ shows an almost isotropy in phonon transport. The origin of the diverse anisotropy is fully studied and the underlying mechanism is discussed in detail. With limited size, the $κ$ could be effectively lowered, and the anisotropy could be effectively modulated by nanostructuring, which would extend the applications in nanoscale thermoelectrics and thermal management. Our study offers fundamental understanding of the anisotropic phonon transport properties of 2D materials, and would be of significance for further study, modulation and aplications in emerging technologies.

physics.comp-ph

Layer dependence of geometric, electronic and piezoelectric properties of SnSe

By means of first-principles calculations, we explore systematically the geometric, electronic and piezoelectric properties of multilayer SnSe. We find that these properties are layer-dependent, indicating that the interlayer interaction plays an important role. With increasing the number of SnSe layers from 1 to 6, we observe that the lattice constant decreases from 4.27 $\mathring{A}$ to 4.22 $\mathring{A}$ along zigzag direction, and increases from 4.41 $\mathring{A}$ to 4.51 $\mathring{A}$ along armchair direction close to the bulk limit (4.21 $\mathring{A}$ and 4.52 $\mathring{A}$, respectively); the band gap decreases from 1.45 eV to 1.08 eV, approaching the bulk gap 0.95 eV. Although the monolayer SnSe exhibits almost symmetric geometric and electronic structures along zigzag and armchair directions, bulk SnSe is obviously anisotropic, showing that the stacking of layers enhances the anisotropic character of SnSe. As bulk and even-layer SnSe have inversion centers, they cannot exhibit piezoelectric responses. However, we show that the odd-layer SnSe have piezoelectric coefficients much higher than those of the known piezoelectric materials, suggesting that the odd-layer SnSe is a good piezoelectric material.

cond-mat.mtrl-sci