Searcharxiv⌕ Search

arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 181 records · Page 10Linked to original sources

Performance Evaluation of RIS-Assisted Spatial Modulation for Downlink Transmission

This paper explores the performance of reconfigurable intelligent surface (RIS) assisted spatial modulation (SM) downlink communication systems, focusing on the average bit error probability (ABEP). Notably, in scenarios with a large number of reflecting units, the composite channel can be approximated by a Gaussian distribution using the central limit theorem. The receiver utilizes a maximum likelihood detector to recover information in both spatial and symbol domains. In the proposed RIS-SM system, we analytically derive a closed-form expression for the union tight upper bound of ABEP, employing the Gaussian-Chebyshev quadrature method. The validity of these results is rigorously confirmed through exhaustive Monte Carlo simulations.

cs.IT↗

STAR-RIS Aided Secure MIMO Communication Systems

This paper investigates simultaneous transmission and reflection reconfigurable intelligent surface (STAR-RIS) aided physical layer security (PLS) in multiple-input multiple-output (MIMO) systems, where the base station (BS) transmits secrecy information with the aid of STAR-RIS against multiple eavesdroppers equipped with multiple antennas. We aim to maximize the secrecy rate by jointly optimizing the active beamforming at the BS and passive beamforming at the STAR-RIS, subject to the hardware constraint for STAR-RIS. To handle the coupling variables, a minimum mean-square error (MMSE) based alternating optimization (AO) algorithm is applied. In particular, the amplitudes and phases of STAR-RIS are divided into two blocks to simplify the algorithm design. Besides, by applying the Majorization-Minimization (MM) method, we derive a closed-form expression of the STAR-RIS's phase shifts. Numerical results show that the proposed scheme significantly outperforms various benchmark schemes, especially as the number of STAR-RIS elements increases.

cs.IT↗

Transmissive RIS Transmitter Enabled Spatial Modulation for MIMO Systems

In this paper, we propose a novel transmissive reconfigurable intelligent surface (TRIS) transmitter-enabled spatial modulation (SM) multiple-input multiple-output (MIMO) system. In the transmission phase, a column-wise activation strategy is implemented for the TRIS panel, where the specific column elements are activated per time slot. Concurrently, the receiver employs the maximum likelihood detection technique. Based on this, for the transmit signals, we derive the closed-form expressions for the upper bounds of the average bit error probability (ABEP) of the proposed scheme from different perspectives, employing both vector-based and element-based approaches. Furthermore, we provide the asymptotic closed-form expressions for the ABEP of the TRIS-SM scheme, as well as the diversity gain. To improve the performance of the proposed TRIS-SM system, we optimize ABEP with a fixed data rate. Additionally, we provide lower bounds to simplify the computational complexity of improved TRIS-SM scheme. The Monte Carlo simulation method is used to validate the theoretical derivations exhaustively. The results demonstrate that the proposed TRIS-SM scheme can achieve better ABEP performance compared to the conventional SM scheme. Furthermore, the improved TRIS-SM scheme outperforms the TRIS-SM scheme in terms of reliability.

cs.IT↗

Robust Analysis of Full-Duplex Two-Way Space Shift Keying With RIS Systems

Reconfigurable intelligent surface (RIS)-assisted index modulation system schemes are considered a promising technology for sixth-generation (6G) wireless communication systems, which can enhance various system capabilities such as coverage and reliability. However, obtaining perfect channel state information (CSI) is challenging due to the lack of a radio frequency chain in RIS. In this paper, we investigate the RIS-assisted full-duplex (FD) two-way space shift keying (SSK) system under imperfect CSI, where the signal emissions are augmented by deploying RISs in the vicinity of two FD users. The maximum likelihood detector is utilized to recover the transmit antenna index. With this in mind, we derive closed-form average bit error probability (ABEP) expression based on the Gaussian-Chebyshev quadrature (GCQ) method and provide the upper bound and asymptotic ABEP expressions in the presence of channel estimation errors. To gain more insights, we also derive the outage probability and provide the throughput of the proposed scheme with imperfect CSI. The correctness of the analytical derivation results is confirmed via Monte Carlo simulations. It is demonstrated that increasing the number of elements of RIS can significantly improve the ABEP performance of the FD system over the half-duplex (HD) system. Furthermore, in the high SNR region, the ABEP performance of the FD system is better than that of the HD system.

cs.IT↗

Intelligent Surfaces Empowered Wireless Network: Recent Advances and The Road to 6G

Intelligent surfaces (ISs) have emerged as a key technology to empower a wide range of appealing applications for wireless networks, due to their low cost, high energy efficiency, flexibility of deployment and capability of constructing favorable wireless channels/radio environments. Moreover, the recent advent of several new IS architectures further expanded their electromagnetic functionalities from passive reflection to active amplification, simultaneous reflection and refraction, as well as holographic beamforming. However, the research on ISs is still in rapid progress and there have been recent technological advances in ISs and their emerging applications that are worthy of a timely review. Thus, we provide in this paper a comprehensive survey on the recent development and advances of ISs aided wireless networks. Specifically, we start with an overview on the anticipated use cases of ISs in future wireless networks such as 6G, followed by a summary of the recent standardization activities related to ISs. Then, the main design issues of the commonly adopted reflection-based IS and their state-of-the-art solutions are presented in detail, including reflection optimization, deployment, signal modulation, wireless sensing, and integrated sensing and communications. Finally, recent progress and new challenges in advanced IS architectures are discussed to inspire futrue research.

cs.IT↗

TJCCT: A Two-timescale Approach for UAV-assisted Mobile Edge Computing

Unmanned aerial vehicle (UAV)-assisted mobile edge computing (MEC) is emerging as a promising paradigm to provide aerial-terrestrial computing services in close proximity to mobile devices (MDs). However, meeting the demands of computation-intensive and delay-sensitive tasks for MDs poses several challenges, including the demand-supply contradiction between MDs and MEC servers, the demand-supply heterogeneity between MDs and MEC servers, the trajectory control requirements on energy efficiency and timeliness, and the different time-scale dynamics of the network. To address these issues, we first present a hierarchical architecture by incorporating terrestrial-aerial computing capabilities and leveraging UAV flexibility. Furthermore, we formulate a joint computing resource allocation, computation offloading, and trajectory control problem to maximize the system utility. Since the problem is a non-convex and NP-hard mixed integer nonlinear programming (MINLP), we propose a two-timescale joint computing resource allocation, computation offloading, and trajectory control (TJCCT) approach for solving the problem. In the short timescale, we propose a price-incentive model for on-demand computing resource allocation and a matching mechanism-based method for computation offloading. In the long timescale, we propose a convex optimization-based method for UAV trajectory control. Besides, we theoretically prove the stability, optimality, and polynomial complexity of TJCCT. Extended simulation results demonstrate that the proposed TJCCT outperforms the comparative algorithms in terms of the system utility, average processing rate, average completion delay, and average completion ratio.

eess.SY↗

Multi-objective Optimization for Multi-UAV-assisted Mobile Edge Computing

Recent developments in unmanned aerial vehicles (UAVs) and mobile edge computing (MEC) have provided users with flexible and resilient computing services. However, meeting the computing-intensive and latency-sensitive demands of users poses a significant challenge due to the limited resources of UAVs. To address this challenge, we present a multi-objective optimization approach for multi-UAV-assisted MEC systems. First, we formulate a multi-objective optimization problem \textcolor{b2}{aiming} at minimizing the total task completion delay, reducing the total UAV energy consumption, and maximizing the total amount of offloaded tasks by jointly optimizing task offloading, computation resource allocation, and UAV trajectory control. Since the problem is a mixed-integer non-linear programming (MINLP) and NP-hard problem which is challenging, we propose a joint task offloading, computation resource allocation, and UAV trajectory control (JTORATC) approach to solve the problem. \textcolor{b3}{However, since the decision variables of task offloading, computation resource allocation, and UAV trajectory control are coupled with each other, the original problem is split into three sub-problems, i.e., task offloading, computation resource allocation, and UAV trajectory control, which are solved individually to obtain the corresponding decisions.} \textcolor{b2}{Moreover, the sub-problem of task offloading is solved by using distributed splitting and threshold rounding methods, the sub-problem of computation resource allocation is solved by adopting the Karush-Kuhn-Tucker (KKT) method, and the sub-problem of UAV trajectory control is solved by employing the successive convex approximation (SCA) method.} Simulation results show that the proposed JTORATC has superior performance compared to the other benchmark methods.

eess.SP↗

Large-Scale RIS Enabled Air-Ground Channels: Near-Field Modeling and Analysis

Existing works mainly rely on the far-field planar-wave-based channel model to assess the performance of reconfigurable intelligent surface (RIS)-enabled wireless communication systems. However, when the transmitter and receiver are in near-field ranges, this will result in relatively low computing accuracy. To tackle this challenge, we initially develop an analytical framework for sub-array partitioning. This framework divides the large-scale RIS array into multiple sub-arrays, effectively reducing modeling complexity while maintaining acceptable accuracy. Then, we develop a beam domain channel model based on the proposed sub-array partition framework for large-scale RIS-enabled UAV-to-vehicle communication systems, which can be used to efficiently capture the sparse features in RIS-enabled UAV-to-vehicle channels in both near-field and far-field ranges. Furthermore, some important propagation characteristics of the proposed channel model, including the spatial cross-correlation functions (CCFs), temporal auto-correlation functions (ACFs), frequency correlation functions (CFs), and channel capacities with respect to the different physical features of the RIS and non-stationary properties of the channel model are derived and analyzed. Finally, simulation results are provided to demonstrate that the proposed framework is helpful to achieve a good tradeoff between model complexity and accuracy for investigating the channel propagation characteristics, and therefore providing highly-efficient communications in RIS-enabled UAV-to-vehicle wireless networks.

eess.SP↗

Fairness Optimization for Intelligent Reflecting Surface Aided Uplink Rate-Splitting Multiple Access

This paper studies the fair transmission design for an intelligent reflecting surface (IRS) aided rate-splitting multiple access (RSMA). IRS is used to establish a good signal propagation environment and enhance the RSMA transmission performance. The fair rate adaption problem is constructed as a max-min optimization problem. To solve the optimization problem, we adopt an alternative optimization (AO) algorithm to optimize the power allocation, beamforming, and decoding order, respectively. A generalized power iteration (GPI) method is proposed to optimize the receive beamforming, which can improve the minimum rate of devices and reduce the optimization complexity. At the base station (BS), a successive group decoding (SGD) algorithm is proposed to tackle the uplink signal estimation, which trades off the fairness and complexity of decoding. At the same time, we also consider robust communication with imperfect channel state information at the transmitter (CSIT), which studies robust optimization by using lower bound expressions on the expected data rates. Extensive numerical results show that the proposed optimization algorithm can significantly improve the performance of fairness. It also provides reliable results for uplink communication with imperfect CSIT.

cs.IT↗

Integrated Sensing and Communication: Joint Pilot and Transmission Design

This paper studies a communication-centric integrated sensing and communication (ISAC) system, where a multi-antenna base station (BS) simultaneously performs downlink communication and target detection. A novel target detection and information transmission protocol is proposed, where the BS executes the channel estimation and beamforming successively and meanwhile jointly exploits the pilot sequences in the channel estimation stage and user information in the transmission stage to assist target detection. We investigate the joint design of pilot matrix, training duration, and transmit beamforming to maximize the probability of target detection, subject to the minimum achievable rate required by the user. However, designing the optimal pilot matrix is rather challenging since there is no closed-form expression of the detection probability with respect to the pilot matrix. To tackle this difficulty, we resort to designing the pilot matrix based on the information-theoretic criterion to maximize the mutual information (MI) between the received observations and BS-target channel coefficients for target detection. We first derive the optimal pilot matrix for both channel estimation and target detection, and then propose an unified pilot matrix structure to balance minimizing the channel estimation error (MSE) and maximizing MI. Based on the proposed structure, a low-complexity successive refinement algorithm is proposed. Simulation results demonstrate that the proposed pilot matrix structure can well balance the MSE-MI and the Rate-MI tradeoffs, and show the significant region improvement of our proposed design as compared to other benchmark schemes. Furthermore, it is unveiled that as the communication channel is more correlated, the Rate-MI region can be further enlarged.

cs.IT↗

Energy-Efficient Wireless Federated Learning via Doubly Adaptive Quantization

Federated learning (FL) has been recognized as a viable distributed learning paradigm for training a machine learning model across distributed clients without uploading raw data. However, FL in wireless networks still faces two major challenges, i.e., large communication overhead and high energy consumption, which are exacerbated by client heterogeneity in dataset sizes and wireless channels. While model quantization is effective for energy reduction, existing works ignore adapting quantization to heterogeneous clients and FL convergence. To address these challenges, this paper develops an energy optimization problem of jointly designing quantization levels, scheduling clients, allocating channels, and controlling computation frequencies (QCCF) in wireless FL. Specifically, we derive an upper bound identifying the influence of client scheduling and quantization errors on FL convergence. Under the longterm convergence constraints and wireless constraints, the problem is established and transformed into an instantaneous problem with Lyapunov optimization. Solving Karush-Kuhn-Tucker conditions, our closed-form solution indicates that the doubly adaptive quantization level rises with the training process and correlates negatively with dataset sizes. Experiment results validate our theoretical results, showing that QCCF consumes less energy with faster convergence compared with state-of-the-art baselines.

cs.DC↗

Rate-Splitting Multiple Access for Transmissive Reconfigurable Intelligent Surface Transceiver Empowered ISAC System

In this paper, a novel transmissive reconfigurable intelligent surface (TRIS) transceiver empowered integrated sensing and communications (ISAC) system is proposed for future multi-demand terminals. To address interference management, we implement rate-splitting multiple access (RSMA), where the common stream is independently designed for the sensing service. We introduce the sensing quality of service (QoS) criteria based on this structure and construct an optimization problem with the sensing QoS criteria as the objective function to optimize the sensing stream precoding matrix and the communication stream precoding matrix. Due to the coupling of optimization variables, the formulated problem is a non-convex optimization problem that cannot be solved directly. To tackle the above-mentioned challenging problem, alternating optimization (AO) is utilized to decouple the optimization variables. Specifically, the problem is decoupled into three subproblems about the sensing stream precoding matrix, the communication stream precoding matrix, and the auxiliary variables, which is solved alternatively through AO until the convergence is reached. For solving the problem, successive convex approximation (SCA) is applied to deal with the sum-rate threshold constraints on communications, and difference-of-convex (DC) programming is utilized to solve rank-one non-convex constraints. Numerical simulation results verify the superiority of the proposed scheme in terms of improving the communication and sensing QoS.

cs.IT↗

Semi-Passive Intelligent Reflecting Surface Enabled Sensing Systems

Intelligent reflecting surface (IRS) has garnered growing interest and attention due to its potential for facilitating and supporting wireless communications and sensing. This paper studies a semi-passive IRS-enabled sensing system, where an IRS consists of both passive reflecting elements and active sensors. Our goal is to minimize the Cramér-Rao bound (CRB) for parameter estimation under both point and extended target cases. Towards this goal, we begin by deriving the CRB for the direction-of-arrival (DoA) estimation in closed-form and then theoretically analyze the IRS reflecting elements and sensors allocation design based on the CRB under the point target case with a single-antenna base station (BS). To efficiently solve the corresponding optimization problem for the case with a multi-antenna BS, we propose an efficient algorithm by jointly optimizing the IRS phase shifts and the BS beamformers. Under the extended target case, the CRB for the target response matrix (TRM) estimation is minimized via the optimization of the BS transmit beamformers. Moreover, we explore the influence of various system parameters on the CRB and compare these effects to those observed under the point target case. Simulation results show the effectiveness of the semi-passive IRS and our proposed beamforming design for improving the performance of the sensing system.

eess.SP↗

Joint Beamforming Design for the STAR-RIS-Enabled ISAC Systems with Multiple Targets and Multiple Users

In this paper, the sensing beam pattern gain under simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS)-enabled integrated sensing and communications (ISAC) systems is investigated, in which multiple targets and multiple users exist. However, multiple targets detection introduces new challenges, since the STAR-RIS cannot directly send sensing beams and detect targets, the dual-functional base station (DFBS) is required to analyze the echoes of the targets. While the echoes reflected by different targets through STAR-RIS come from the same direction for the DFBS, making it impossible to distinguish them. To address the issue, we first introduce the signature sequence (SS) modulation scheme to the ISAC system, and thus, the DFBS can detect different targets by the SS-modulated sensing beams. Next, via the joint beamforming design of DFBS and STAR-RIS, we develop a maxmin sensing beam pattern gain problem, and meanwhile, considering the communication quality requirements, the interference limitations of other targets and users, the passive nature constraint of STAR-RIS, and the total transmit power limitation. Then, to tackle the complex non-convex problem, we propose an alternating optimization method to divide it into two quadratic semidefinite program subproblems and decouple the coupled variables. Drawing on mathematical transformation, semidefinite programming, as well as semidefinite relaxation techniques, these two subproblems are iteratively sloved until convergence, and the ultimate solutions are obtained. Finally, simulation results are conducted to validate the benefits and efficiency of our proposed scheme.

cs.IT↗

Movable-Antenna-Array-Enabled Communications with CoMP Reception

We consider the movable-antenna (MA) arrayenabled wireless communication with coordinate multi-point (CoMP) reception, where multiple destinations adopt the maximal ratio combination technique to jointly decode the common message sent from the transmitter equipped with the MA array. Our goal is to maximize the effective received signal-to-noise ratio, by jointly optimizing the transmit beamforming and the positions of the MA array. Although the formulated problem is highly non-convex, we reveal that it is fundamental to maximize the principal eigenvalue of a hermite channel matrix which is a function of the positions of the MA array. The corresponding sub-problem is still non-convex, for which we develop a computationally efficient algorithm. Afterwards, the optimal transmit beamforming is determined with a closed-form solution. In addition, the theoretical performance upper bound is analyzed. Since the MA array brings an additional spatial degree of freedom by flexibly adjusting all antennas' positions, it achieves significant performance gain compared to competitive benchmarks.

cs.IT↗

Antenna Positioning and Beamforming Design for Fluid-Antenna Enabled Multi-user Downlink Communications

This paper investigates a multiple input single output (MISO) downlink communication system in which users are equipped with fluid antennas (FAs). First, we adopt a field-response based channel model to characterize the downlink channel with respect to FAs' positions. Then, we aim to minimize the total transmit power by jointly optimizing the FAs' positions and beamforming matrix. To solve the resulting non-convex problem, we employ an alternating optimization (AO) algorithm based on penalty method and successive convex approximation (SCA) to obtain a sub-optimal solution. Numerical results demonstrate that the FA-assisted communication system performs better than conventional fixed position antennas system.

cs.IT↗

Fluid Antennas-Enabled Multiuser Uplink: A Low-Complexity Gradient Descent for Total Transmit Power Minimization

We investigate multiuser uplink communication from multiple single-antenna users to a base station (BS), which is equipped with a movable-antenna (MA) array and adopts zero-forcing receivers to decode multiple signals. We aim to optimize the MAs' positions at the BS, to minimize the total transmit power of all users subject to the minimum rate requirement. After applying transformations, we show that the problem is equivalent to minimizing the sum of each eigenvalue's reciprocal of a matrix, which is a function of all MAs' positions. Subsequently, the projected gradient descent (PGD) method is utilized to find a locally optimal solution. In particular, different from the latest related work, we exploit the eigenvalue decomposition to successfully derive a closed-form gradient for the PGD, which facilitates the practical implementation greatly. We demonstrate by simulations that via careful optimization for all MAs' positions in our proposed design, the total transmit power of all users can be decreased significantly as compared to competitive benchmarks.

cs.IT↗

Cooperative Cellular Localization with Intelligent Reflecting Surface: Design, Analysis and Optimization

Autonomous driving and intelligent transportation applications have dramatically increased the demand for high-accuracy and low-latency localization services. While cellular networks are potentially capable of target detection and localization, achieving accurate and reliable positioning faces critical challenges. Particularly, the relatively small radar cross sections (RCS) of moving targets and the high complexity for measurement association give rise to weak echo signals and discrepancies in the measurements. To tackle this issue, we propose a novel approach for multi-target localization by leveraging the controllable signal reflection capabilities of intelligent reflecting surfaces (IRSs). Specifically, IRSs are strategically mounted on the targets (e.g., vehicles and robots), enabling effective association of multiple measurements and facilitating the localization process. We aim to minimize the maximum Cramér-Rao lower bound (CRLB) of targets by jointly optimizing the target association, the IRS phase shifts, and the dwell time. However, solving this CRLB optimization problem is non-trivial due to the non-convex objective function and closely coupled variables. For single-target localization, a simplified closed-form expression is presented for the case where base stations (BSs) can be deployed flexibly, and the optimal BS location is derived to provide a lower performance bound of the original problem ...

cs.IT↗