arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 163 records · Page 9Linked to original sources

arXiv2024

Energy-Aware UAV-Enabled Target Tracking: Online Optimization with Location Constraints

For unmanned aerial vehicle (UAV) trajectory design, the total propulsion energy consumption and initial-final location constraints are practical factors to consider. However, unlike traditional offline designs, these two constraints are non-trivial to concurrently satisfy in online UAV trajectory designs for real-time target tracking, due to the undetermined information. To address this issue, we propose a novel online UAV trajectory optimization approach for the weighted sum-predicted posterior Cramér-Rao bound (PCRB) minimization, which guarantees the feasibility of satisfying the two mentioned constraints. Specifically, our approach designs the UAV trajectory by solving two subproblems: the candidate trajectory optimization problem and the energy-aware backup trajectory optimization problem. Then, an efficient solution to the candidate trajectory optimization problem is proposed based on Dinkelbach's transform and the Lasserre hierarchy, which achieves the global optimal solution under a given sufficient condition. The energy-aware backup trajectory optimization problem is solved by the successive convex approximation method. Numerical results show that our proposed UAV trajectory optimization approach significantly outperforms the benchmark regarding sensing performance and energy utilization flexibility.

eess.SP↗

arXiv2024

Cramer-Rao Bound Minimization for Movable Antenna-Assisted Multiuser Integrated Sensing and Communications

This paper investigates a movable antenna (MA)-assisted multiuser integrated sensing and communication (ISAC) system, where the base station (BS) and communication users are all equipped with MA for improving both the sensing and communication performance. We employ the Cramer-Rao bound (CRB) as the performance metric of sensing, thus a joint beamforming design and MAs' position optimizing problem is formulated to minimize the CRB. However the resulting optimization problem is NP-hard and the variables are highly coupled. To tackle this problem, we propose an alternating optimization (AO) framework by adopting semidefinite relaxation (SDR) and successive convex approximation (SCA) technique. Numerical results reveal that the proposed MA-assisted ISAC system achieves lower estimation CRB compared to the fixed-position antenna (FPA) counterpart.

eess.SP↗

arXiv2024

Multi-objective Aerial Collaborative Secure Communication Optimization via Generative Diffusion Model-enabled Deep Reinforcement Learning

Due to flexibility and low-cost, unmanned aerial vehicles (UAVs) are increasingly crucial for enhancing coverage and functionality of wireless networks. However, incorporating UAVs into next-generation wireless communication systems poses significant challenges, particularly in sustaining high-rate and long-range secure communications against eavesdropping attacks. In this work, we consider a UAV swarm-enabled secure surveillance network system, where a UAV swarm forms a virtual antenna array to transmit sensitive surveillance data to a remote base station (RBS) via collaborative beamforming (CB) so as to resist mobile eavesdroppers. Specifically, we formulate an aerial secure communication and energy efficiency multi-objective optimization problem (ASCEE-MOP) to maximize the secrecy rate of the system and to minimize the flight energy consumption of the UAV swarm. To address the non-convex, NP-hard and dynamic ASCEE-MOP, we propose a generative diffusion model-enabled twin delayed deep deterministic policy gradient (GDMTD3) method. Specifically, GDMTD3 leverages an innovative application of diffusion models to determine optimal excitation current weights and position decisions of UAVs. The diffusion models can better capture the complex dynamics and the trade-off of the ASCEE-MOP, thereby yielding promising solutions. Simulation results highlight the superior performance of the proposed approach compared with traditional deployment strategies and some other deep reinforcement learning (DRL) benchmarks. Moreover, performance analysis under various parameter settings of GDMTD3 and different numbers of UAVs verifies the robustness of the proposed approach.

cs.NI↗

arXiv2024

A Bistatic Sensing System in Space-Air-Ground Integrated Networks

Sensing is anticipated to have wider extensions in communication systems with the boom of non-terrestrial networks (NTNs) during the past years. In this paper, we study a bistatic sensing system by maximizing the signal-to-interference-plus-noise ration (SINR) from the target aircraft in the space-air-ground integrated network (SAGIN). We formulate a joint optimization problem for the transmit beamforming of low-earth orbit (LEO) satellite and the receive filtering of ground base station. To tackle this problem, we decompose the original problem into two sub-problems and use the alternating optimization to solve them iteratively. Using techniques of fractional programming and generalized Rayleigh quotient, the closed-form solution for each sub-problem is returned. Simulation results show that the proposed algorithm has good convergence performance.Moreover, the optimization of receive filtering dominates the optimality, especially when the satellite altitude becomes higher, which provides valuable network design insights.

eess.SP↗

arXiv2024

Multi-Functional Beamforming Design for Integrated Sensing, Communication, and Computation

Integrated sensing and communication (ISAC) systems may face a heavy computation burden since the sensory data needs to be further processed. This paper studies a novel system that integrates sensing, communication, and computation, aiming to provide services for different objectives efficiently. This system consists of a multi-antenna multi-functional base station (BS), an edge server, a target, and multiple singleantenna communication users. The BS needs to allocate the available resources to efficiently provide sensing, communication, and computation services. Due to the heavy service burden and limited power budget, the BS can partially offload the tasks to the nearby edge server instead of computing them locally. We consider the estimation of the target response matrix, a general problem in radar sensing, and utilize Cramer-Rao bound (CRB) as the corresponding performance metric. To tackle the non-convex optimization problem, we propose both semidefinite relaxation (SDR)-based alternating optimization and SDR-based successive convex approximation (SCA) algorithms to minimize the CRB of radar sensing while meeting the requirement of communication users and the need for task computing. Furthermore, we demonstrate that the optimal rankone solutions of both the alternating and SCA algorithms can be directly obtained via the solver or further constructed even when dealing with multiple functionalities. Simulation results show that the proposed algorithms can provide higher target estimation performance than state-of-the-art benchmarks while satisfying the communication and computation constraints.

eess.SP↗

arXiv2024

Multiple Intelligent Reflecting Surfaces Collaborative Wireless Localization System

This paper studies a multiple intelligent reflecting surfaces (IRSs) collaborative localization system where multiple semi-passive IRSs are deployed in the network to locate one or more targets based on time-of-arrival. It is assumed that each semi-passive IRS is equipped with reflective elements and sensors, which are used to establish the line-of-sight links from the base station (BS) to multiple targets and process echo signals, respectively. Based on the above model, we derive the Fisher information matrix of the echo signal with respect to the time delay. By employing the chain rule and exploiting the geometric relationship between time delay and position, the Cramer-Rao bound (CRB) for estimating the target's Cartesian coordinate position is derived. Then, we propose a two-stage algorithmic framework to minimize CRB in single- and multi-target localization systems by joint optimizing active beamforming at BS, passive beamforming at multiple IRSs and IRS selection. For the single-target case, we derive the optimal closed-form solution for multiple IRSs coefficients design and propose a lowcomplexity algorithm based on alternating direction method of multipliers to obtain the optimal solution for active beaming design. For the multi-target case, alternating optimization is used to transform the original problem into two subproblems where semi-definite relaxation and successive convex approximation are applied to tackle the quadraticity and indefiniteness in the CRB expression, respectively. Finally, numerical simulation results validate the effectiveness of the proposed algorithm for multiple IRSs collaborative localization system compared to other benchmark schemes as well as the significant performance gains.

cs.IT↗

arXiv2024

Reconfigurable Intelligent Surfaces for 6G: Emerging Hardware Architectures, Applications, and Open Challenges

Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of fifth generation (5G)-Advanced, and predominantly, sixth generation (6G) mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operating modes. These include RISs with signal reception and processing units, sensors, amplification units, transmissive capability, multiple stacked components, and dynamic metasurface antennas. Furthermore, we shed light on emerging RIS applications, such as index and reflection modulation, non-coherent modulation, next generation multiple access, integrated sensing and communications (ISAC), energy harvesting, as well as aerial and vehicular networks. These exciting applications are set to transform the way we will wirelessly connect in the upcoming era of 6G. Finally, we review recent experimental RIS setups and present various open problems of the overviewed RIS hardware architectures and their applications. From enhancing network coverage to enabling new communication paradigms, RIS-empowered connectivity is poised to play a pivotal role in shaping the future of wireless networking. This article unveils the underlying principles and potential impacts of RISs, focusing on cutting-edge developments of this physical-layer smart connectivity technology.

cs.IT↗

arXiv2024

Movable Antenna Enhanced NOMA Short-Packet Transmission

This letter investigates a short-packet downlink transmission system using non-orthogonal multiple access (NOMA) enhanced via movable antenna (MA). We focuses on maximizing the effective throughput for a core user while ensuring reliable communication for an edge user by optimizing the MAs' coordinates and the power and rate allocations from the access point (AP). The optimization challenge is approached by decomposing it into two subproblems, utilizing successive convex approximation (SCA) to handle the highly non-concave nature of channel gains. Numerical results confirm that the proposed solution offers substantial improvements in effective throughput compared to NOMA short-packet communication with fixed position antennas (FPAs).

eess.SP↗

arXiv2024

Sustainable Wireless Networks via Reconfigurable Intelligent Surfaces (RISs): Overview of the ETSI ISG RIS

Reconfigurable Intelligent Surfaces (RISs) are a novel form of ultra-low power devices that are capable to increase the communication data rates as well as the cell coverage in a cost- and energy-efficient way. This is attributed to their programmable operation that enables them to dynamically manipulate the wireless propagation environment, a feature that has lately inspired numerous research investigations and applications. To pave the way to the formal standardization of RISs, the European Telecommunications Standards Institute (ETSI) launched the Industry Specification Group (ISG) on the RIS technology in September 2021. This article provides a comprehensive overview of the status of the work conducted by the ETSI ISG RIS, covering typical deployment scenarios of reconfigurable metasurfaces, use cases and operating applications, requirements, emerging hardware architectures and operating modes, as well as the latest insights regarding future directions of RISs and the resulting smart wireless environments.

eess.SP↗

arXiv2024

Intelligent Reflecting Surface Aided AirComp: Multi-Timescale Design and Performance Analysis

The integration of intelligent reflecting surface (IRS) into over-the-air computation (AirComp) is an effective solution for reducing the computational mean squared error (MSE) via its high passive beamforming gain. Prior works on IRS aided AirComp generally rely on the full instantaneous channel state information (I-CSI), which is not applicable to large-scale systems due to its heavy signalling overhead. To address this issue, we propose a novel multi-timescale transmission protocol. In particular, the receive beamforming at the access point (AP) is pre-determined based on the static angle information and the IRS phase-shifts are optimized relying on the long-term statistical CSI. With the obtained AP receive beamforming and IRS phase-shifts, the effective low-dimensional I-CSI is exploited to determine devices' transmit power in each coherence block, thus substantially reducing the signalling overhead. Theoretical analysis unveils that the achievable MSE scales on the order of ${\cal O}\left( {K/\left( {{N^2}M} \right)} \right)$, where $M$, $N$, and $K$ are the number of AP antennas, IRS elements, and devices, respectively. We also prove that the channel-inversion power control is asymptotically optimal for large $N$, which reveals that the full power transmission policy is not needed for lowering the power consumption of energy-limited devices.

cs.IT↗

arXiv2024

Movable Antennas-Enabled Two-User Multicasting: Do We Really Need Alternating Optimization for Minimum Rate Maximization?

Movable antenna (MA) technology, which can reconfigure wireless channels by flexibly moving antenna positions in a specified region, has great potential for improving communication performance. In this paper, we consider a new setup of MAs-enabled multicasting, where we adopt a simple setting in which a linear MA array-enabled source (${\rm{S}}$) transmits a common message to two single-antenna users ${\rm{U}}_1$ and ${\rm{U}}_2$. We aim to maximize the minimum rate among these two users, by jointly optimizing the transmit beamforming and antenna positions at ${\rm{S}}$. Instead of utilizing the widely-used alternating optimization (AO) approach, we reveal, with rigorous proof, that the above two variables can be optimized separately: i) the optimal antenna positions can be firstly determined via the successive convex approximation technique, based on the rule of maximizing the correlation between ${\rm{S}}$-${\rm{U}}_1$ and ${\rm{S}}$-${\rm{U}}_2$ channels; ii) afterwards, the optimal closed-form transmit beamforming can be derived via simple arguments. Compared to AO, this new approach yields the same performance but reduces the computational complexities significantly. Moreover, it can provide insightful conclusions which are not possible with AO.

cs.IT↗

arXiv2024

UAV-enabled Integrated Sensing and Communication: Tracking Design and Optimization

Integrated sensing and communications (ISAC) enabled by unmanned aerial vehicles (UAVs) is a promising technology to facilitate target tracking applications. In contrast to conventional UAV-based ISAC system designs that mainly focus on estimating the target position, the target velocity estimation also needs to be considered due to its crucial impacts on link maintenance and real-time response, which requires new designs on resource allocation and tracking scheme. In this paper, we propose an extended Kalman filtering-based tracking scheme for a UAV-enabled ISAC system where a UAV tracks a moving object and also communicates with a device attached to the object. Specifically, a weighted sum of predicted posterior Cramér-Rao bound (PCRB) for object relative position and velocity estimation is minimized by optimizing the UAV trajectory, where an efficient solution is obtained based on the successive convex approximation method. Furthermore, under a special case with the measurement mean square error (MSE), the optimal relative motion state is obtained and proved to keep a fixed elevation angle and zero relative velocity. Numerical results validate that the obtained solution to the predicted PCRB minimization can be approximated by the optimal relative motion state when predicted measurement MSE dominates the predicted PCRBs, as well as the effectiveness of the proposed tracking scheme. Moreover, three interesting trade-offs on system performance resulted from the fixed elevation angle are illustrated.

eess.SP↗

arXiv2024

Communication-Efficient Model Aggregation with Layer Divergence Feedback in Federated Learning

Federated Learning (FL) facilitates collaborative machine learning by training models on local datasets, and subsequently aggregating these local models at a central server. However, the frequent exchange of model parameters between clients and the central server can result in significant communication overhead during the FL training process. To solve this problem, this paper proposes a novel FL framework, the Model Aggregation with Layer Divergence Feedback mechanism (FedLDF). Specifically, we calculate model divergence between the local model and the global model from the previous round. Then through model layer divergence feedback, the distinct layers of each client are uploaded and the amount of data transferred is reduced effectively. Moreover, the convergence bound reveals that the access ratio of clients has a positive correlation with model performance. Simulation results show that our algorithm uploads local models with reduced communication overhead while upholding a superior global model performance.

cs.DC↗

arXiv2024

Two-Way Aerial Secure Communications via Distributed Collaborative Beamforming under Eavesdropper Collusion

Unmanned aerial vehicles (UAVs)-enabled aerial communication provides a flexible, reliable, and cost-effective solution for a range of wireless applications. However, due to the high line-of-sight (LoS) probability, aerial communications between UAVs are vulnerable to eavesdropping attacks, particularly when multiple eavesdroppers collude. In this work, we aim to introduce distributed collaborative beamforming (DCB) into UAV swarms and handle the eavesdropper collusion by controlling the corresponding signal distributions. Specifically, we consider a two-way DCB-enabled aerial communication between two UAV swarms and construct these swarms as two UAV virtual antenna arrays. Then, we minimize the two-way known secrecy capacity and the maximum sidelobe level to avoid information leakage from the known and unknown eavesdroppers, respectively. Simultaneously, we also minimize the energy consumption of UAVs for constructing virtual antenna arrays. Due to the conflicting relationships between secure performance and energy efficiency, we consider these objectives as a multi-objective optimization problem. Following this, we propose an enhanced multi-objective swarm intelligence algorithm via the characterized properties of the problem. Simulation results show that our proposed algorithm can obtain a set of informative solutions and outperform other state-of-the-art baseline algorithms. Experimental tests demonstrate that our method can be deployed in limited computing power platforms of UAVs and is beneficial for saving computational resources.

cs.NI↗

arXiv2024

Collaborative Ground-Space Communications via Evolutionary Multi-objective Deep Reinforcement Learning

In this paper, we propose a distributed collaborative beamforming (DCB)-based uplink communication paradigm for enabling ground-space direct communications. Specifically, DCB treats the terminals that are unable to establish efficient direct connections with the low Earth orbit (LEO) satellites as distributed antennas, forming a virtual antenna array to enhance the terminal-to-satellite uplink achievable rates and durations. However, such systems need multiple trade-off policies that variously balance the terminal-satellite uplink achievable rate, energy consumption of terminals, and satellite switching frequency to satisfy the scenario requirement changes. Thus, we perform a multi-objective optimization analysis and formulate a long-term optimization problem. To address availability in different terminal cluster scales, we reformulate this problem into an action space-reduced and universal multi-objective Markov decision process. Then, we propose an evolutionary multi-objective deep reinforcement learning algorithm to obtain the desirable policies, in which the low-value actions are masked to speed up the training process. As such, the applicability of a one-time trained model can cover more changing terminal-satellite uplink scenarios. Simulation results show that the proposed algorithm outmatches various baselines, and draw some useful insights. Specifically, it is found that DCB enables terminals that cannot reach the uplink achievable threshold to achieve efficient direct uplink transmission, which thus reveals that DCB is an effective solution for enabling direct ground-space communications. Moreover, it reveals that the proposed algorithm achieves multiple policies favoring different objectives and achieving near-optimal uplink achievable rates with low switching frequency.

cs.NI↗

arXiv2024

UAV-enabled Collaborative Beamforming via Multi-Agent Deep Reinforcement Learning

In this paper, we investigate an unmanned aerial vehicle (UAV)-assistant air-to-ground communication system, where multiple UAVs form a UAV-enabled virtual antenna array (UVAA) to communicate with remote base stations by utilizing collaborative beamforming. To improve the work efficiency of the UVAA, we formulate a UAV-enabled collaborative beamforming multi-objective optimization problem (UCBMOP) to simultaneously maximize the transmission rate of the UVAA and minimize the energy consumption of all UAVs by optimizing the positions and excitation current weights of all UAVs. This problem is challenging because these two optimization objectives conflict with each other, and they are non-concave to the optimization variables. Moreover, the system is dynamic, and the cooperation among UAVs is complex, making traditional methods take much time to compute the optimization solution for a single task. In addition, as the task changes, the previously obtained solution will become obsolete and invalid. To handle these issues, we leverage the multi-agent deep reinforcement learning (MADRL) to address the UCBMOP. Specifically, we use the heterogeneous-agent trust region policy optimization (HATRPO) as the basic framework, and then propose an improved HATRPO algorithm, namely HATRPO-UCB, where three techniques are introduced to enhance the performance. Simulation results demonstrate that the proposed algorithm can learn a better strategy compared with other methods. Moreover, extensive experiments also demonstrate the effectiveness of the proposed techniques.

cs.NI↗

arXiv2024

Movable Antennas-Assisted Secure Transmission Without Eavesdroppers' Instantaneous CSI

Movable antenna (MA) technology is highly promising for improving communication performance, due to its advantage of flexibly adjusting positions of antennas to reconfigure channel conditions. In this paper, we investigate MAs-assisted secure transmission under a legitimate transmitter Alice, a legitimate receiver Bob and multiple eavesdroppers. Specifically, we consider a practical scenario where Alice has no any knowledge about the instantaneous non-line-of-sight component of the wiretap channel. Under this setup, we evaluate the secrecy performance by adopting the secrecy outage probability metric, the tight approximation of which is first derived by interpreting the Rician fading as a special case of Nakagami fading and concurrently exploiting the Laguerre series approximation. Then, we minimize the secrecy outage probability by jointly optimizing the transmit beamforming and positions of antennas at Alice. However, the problem is highly non-convex because the objective includes the complex incomplete gamma function. To tackle this challenge, we, for the first time, effectively approximate the inverse of the incomplete gamma function as a simple linear model. Based on this approximation, we arrive at a simplified problem with a clear structure, which can be solved via the developed alternating projected gradient ascent (APGA) algorithm. Considering the high complexity of the APGA, we further design another scheme where the zero-forcing based beamforming is adopted by Alice, and then we transform the problem into minimizing a simple function which is only related to positions of antennas at Alice.As demonstrated by simulations, our proposed schemes achieve significant performance gains compared to conventional schemes based on fixed-position antennas.

cs.IT↗

arXiv2024

Movable Antenna Enabled Interference Network: Joint Antenna Position and Beamforming Design

This paper investigates the utility of movable antenna (MA) assistance for the multiple-input single-output (MISO) interference channel. We exploit an additional design degree of freedom provided by MA to enhance the desired signal and suppress interference so as to reduce the total transmit power of interference network. To this end, we jointly optimize the MA positions and transmit beamforming, subject to the signal-to-interference-plus-noise ratio constraints of users. To address the non-convex optimization problem, we propose an efficient iterative algorithm to alternately optimize the MA positions via successive convex approximation method and the transmit beamforming via second-order cone program approach. Numerical results demonstrate that the proposed MA-enabled MISO interference network outperforms its conventional counterpart without MA, which significantly enhances the capability of inter-cell frequency reuse and reduces the complexity of transmitter design.

cs.IT↗