arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 307 records · Page 17Linked to original sources

arXiv2020

Intelligent Reflecting Surface Assisted Anti-Jamming Communications Based on Reinforcement Learning

Malicious jamming launched by smart jammer, which attacks legitimate transmissions has been regarded as one of the critical security challenges in wireless communications. Thus, this paper exploits intelligent reflecting surface (IRS) to enhance anti-jamming communication performance and mitigate jamming interference by adjusting the surface reflecting elements at the IRS. Aiming to enhance the communication performance against smart jammer, an optimization problem for jointly optimizing power allocation at the base station (BS) and reflecting beamforming at the IRS is formulated. As the jamming model and jamming behavior are dynamic and unknown, a win or learn fast policy hill-climbing (WoLF-PHC) learning approach is proposed to jointly optimize the anti-jamming power allocation and reflecting beamforming strategy without the knowledge of the jamming model. Simulation results demonstrate that the proposed anti-jamming based-learning approach can efficiently improve both the IRS-assisted system rate and transmission protection level compared with existing solutions.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface Aided MISO Uplink Communication Network: Feasibility and Power Minimization for Perfect and Imperfect CSI

In this paper, we consider the weighted sum-power minimization under quality-of-service (QoS) constraints in the multi-user multi-input-single-output (MISO) uplink wireless network assisted by intelligent reflecting surface (IRS). We perform a comprehensive investigation on various aspects of this problem. First, when users have sufficient transmit powers, we present a new sufficient condition guaranteeing arbitrary information rate constraints. This result strengthens the feasibility condition in existing literature. Then, we design novel penalty dual decomposition (PDD) based and nonlinear equality constrained alternative direction method of multipliers (neADMM) based solutions to tackle the IRS-dependent-QoS-constraints, which effectively solve the feasibility check and power minimization problems. Besides, we further extend our proposals to the cases where channel status information (CSI) is imperfect and develop an online stochastic algorithm that satisfy QoS constraints stochastically without requiring prior knowledge of CSI errors. Extensive numerical results are presented to verify the effectiveness of our proposed algorithms.

eess.SP↗

arXiv2020

Covert Communication in Intelligent Reflecting Surface-Assisted NOMA Systems: Design, Analysis, and Optimization

In this paper, we investigate covert communication in an intelligent reflecting surface (IRS)-assisted non-orthogonal multiple access (NOMA) system, where a legitimate transmitter (Alice) applies NOMA for downlink and uplink transmissions with a covert user (Bob) and a public user (Roy) aided by an IRS. Specifically, we propose new IRS-assisted downlink and uplink NOMA schemes to hide the existence of Bob's covert transmission from a warden (Willie), which cost-effectively exploit the phase-shift uncertainty of the IRS and the non-orthogonal signal transmission of Roy as the cover medium without requiring additional uncertainty sources. Assuming the worst-case covert communication scenario where Willie can optimally adjust the detection threshold for his detector, we derive an analytical expression for the minimum average detection error probability of Willie achieved by each of the proposed schemes. To further enhance the covert communication performance, we propose to maximize the covert rates of Bob by jointly optimizing the transmit power and the IRS reflect beamforming, subject to given requirements on the covertness against Willie and the quality-of-service (QoS) at Roy. Simulation results demonstrate the covertness advantage of the proposed schemes and confirm the accuracy of the derived analytical results. Interestingly, it is found that covert communication is impossible without using IRS or NOMA for the considered setup while the proposed schemes can always guarantee positive covert rates.

cs.IT↗

arXiv2020

Intelligent Reflecting Surface-Aided Joint Processing Coordinated Multipoint Transmission

This paper investigates intelligent reflecting surface (IRS)-aided multicell wireless networks, where an IRS is deployed to assist the joint processing coordinated multipoint (JP-CoMP) transmission from multiple base stations (BSs) to multiple cell-edge users. By taking into account the fairness among cell-edge users, we aim at maximizing the minimum achievable rate of cell-edge users by jointly optimizing the transmit beamforming at the BSs and the phase shifts at the IRS. As a compromise approach, we transform the non-convex max-min problem into an equivalent form based on the mean-square error method, which facilities the design of an efficient suboptimal iterative algorithm. In addition, we investigate two scenarios, namely the single-user system and the multiuser system. For the former scenario, the optimal transmit beamforming is obtained based on the dual subgradient method, while the phase shift matrix is optimized based on the Majorization-Minimization method. For the latter scenario, the transmit beamforming matrix and phase shift matrix are obtained by the second-order cone programming and semidefinite relaxation techniques, respectively. Numerical results demonstrate the significant performance improvement achieved by deploying an IRS. Furthermore, the proposed JP-CoMP design significantly outperforms the conventional coordinated scheduling/coordinated beamforming coordinated multipoint (CS/CB-CoMP) design in terms of max-min rate.

cs.IT↗

arXiv2020

Secure Two-Way Communications via Intelligent Reflecting Surfaces

In this letter, we propose to exploit an intelligent reflecting surface (IRS) to secure multiuser two-way communications. Specifically, two end users simultaneously transmit their signals, where the signal of one user is exploited as information jamming to disrupt the reception of the other user's signal at an eavesdropper. A simple user scheduling scheme is developed to improve the secrecy rate. Analytical results in terms of a lower bound on the average secrecy rate and its scaling laws are derived to evaluate the secrecy performance and obtain valuable design insights. Simulation results are provided to confirm the accuracy of the theoretical analysis and validate the secrecy improvement of the proposed scheme over other baseline schemes.

cs.IT↗

arXiv2020

Massive MIMO for Cellular-Connected UAV: Challenges and Promising Solutions

Massive multiple-input multiple-output (MIMO) is a promising technology for enabling cellular-connected unmanned aerial vehicle (UAV) communications in the future. Equipped with full-dimensional large arrays, ground base stations (GBSs) can apply adaptive fine-grained three-dimensional (3D) beamforming to mitigate the strong interference between high-altitude UAVs and low-altitude terrestrial users, thus significantly enhancing the network spectral efficiency. However, the performance gain of massive MIMO critically depends on the accurate channel state information (CSI) of both UAVs and terrestrial users at the GBSs, which is practically difficult to achieve due to UAV-induced pilot contamination and UAV's high mobility in 3D. Moreover, the increasingly popular applications relying on a large group of coordinated UAVs or UAV swarm as well as the practical hybrid GBS beamforming architecture for massive MIMO further complicate the pilot contamination and channel/beam tracking problems. In this article, we provide an overview of the above challenging issues, propose new solutions to cope with them, and discuss about promising directions for future research. Preliminary simulation results are also provided to validate the effectiveness of proposed solutions.

cs.IT↗

arXiv2020

Energy-Efficient Trajectory Design for UAV-Enabled Communication Under Malicious Jamming

In this letter, we investigate a UAV-enabled communication system, where a UAV is deployed to communicate with the ground node (GN) in the presence of multiple jammers. We aim to maximize the energy efficiency (EE) of the UAV by optimizing its trajectory, subject to the UAV's mobility constraints. However, the formulated problem is difficult to solve due to the non-convex and fractional form of the objective function. Thus, we propose an iterative algorithm based on successive convex approximation (SCA) technique and Dinkelbach's algorithm to solve it. Numerical results show that the proposed algorithm can strike a better balance between the throughput and energy consumption by the optimized trajectory and thus improve the EE significantly as compared to the benchmark algorithms.

cs.IT↗

arXiv2020

SCMA Spectral and Energy Efficiency with QoS

Sparse Code Multiple Access (SCMA) is one of the promising candidates for new radio access interface. The new generation communication system is expected to support massive user access with high capacity. However, there are numerous problems and barriers to achieve optimal performance, e.g., the multiuser interference and high power consumption. In this paper, we present optimization methods to enhance the spectral and energy efficiency for SCMA with individual rate requirements. The proposed method has shown a better network mapping matrix based on power allocation and codebook assignment. Moreover, the proposed method is compared with orthogonal frequency devision multiple access (OFDMA) and code devision multiple access (CDMA) in terms of spectral efficiency (SE) and energy efficiency (EE) respectively. Simulation results show that SCMA performs better than OFDMA and CDMA both in SE and EE.

eess.SP↗

arXiv2020

Robust and Secure Communications in Intelligent Reflecting Surface Assisted NOMA networks

This letter investigates secure transmission in an intelligent reflecting surface (IRS) assisted non-orthogonal multiple access (NOMA) network. Consider a practical eavesdropping scenario with imperfect channel state information of the eavesdropper, we propose a robust beamforming scheme using artificial noise to guarantee secure NOMA transmission with the IRS. A joint transmit beamforming and IRS phase shift optimization problem is formulated to minimize the transmit power. Since the problem is non-convex and challenging to resolve, we develop an effective alternative optimization (AO) algorithm to obtain stationary point solutions. Simulation results validate the security advantage of the robust beamforming scheme and the effectiveness of the AO algorithm.

cs.IT↗

arXiv2020

Intelligent Reflecting Surface Enhanced Wireless Network: Two-timescale Beamforming Optimization

Intelligent reflecting surface (IRS) has drawn a lot of attention recently as a promising new solution to achieve high spectral and energy efficiency for future wireless networks. By utilizing massive low-cost passive reflecting elements, the wireless propagation environment becomes controllable and thus can be made favorable for improving the communication performance. Prior works on IRS mainly rely on the instantaneous channel state information (I-CSI), which, however, is practically difficult to obtain for IRS-associated links due to its passive operation and large number of elements. To overcome this difficulty, we propose in this paper a new two-timescale (TTS) transmission protocol to maximize the achievable average sum-rate for an IRS-aided multiuser system under the general correlated Rician channel model. Specifically, the passive IRS phase-shifts are first optimized based on the statistical CSI (S-CSI) of all links, which varies much slowly as compared to their I-CSI, while the transmit beamforming/precoding vectors at the access point (AP) are then designed to cater to the I-CSI of the users' effective channels with the optimized IRS phase-shifts, thus significantly reducing the channel training overhead and passive beamforming complexity over the existing schemes based on the I-CSI of all channels. For the single-user case, a novel penalty dual decomposition (PDD)-based algorithm is proposed, where the IRS phase-shifts are updated in parallel to reduce the computational time. For the multiuser case, we propose a general TTS optimization algorithm by constructing a quadratic surrogate of the objective function, which cannot be explicitly expressed in closed-form. Simulation results are presented to validate the effectiveness of our proposed algorithms and evaluate the impact of S-CSI and channel correlation on the system performance.

cs.IT↗

arXiv2020

Channel Estimation via Direct Calculation and Deep Learning for RIS-Aided mmWave Systems

This paper proposes a novel reconfigurable intelligent surface (RIS) architecture which enables channel estimation of RIS-assisted millimeter wave (mmWave) systems. More specifically, two channel estimation methods, namely, direct calculation (DC) and deep learning (DL) methods, are proposed to skillfully convert the overall channel estimation into two tasks: the channel estimation and the angle parameter estimation of a small number of active elements. In particular, the direct calculation method calculates the angle parameters directly through the channel estimates of adjacent active elements and, based on it, the DL method reduces the angle offset rate and further improves the accuracy of angle parameter estimation. Compared with the traditional methods, the proposed schemes reduce the complexity of the RIS channel estimation while outperforming the beam training method in terms of minimum square error, achievable rate, and outage probability.

cs.IT↗

arXiv2020

Anchor-Assisted Intelligent Reflecting Surface Channel Estimation for Multiuser Communications

Due to the passive nature of Intelligent Reflecting Surface (IRS), channel estimation is a fundamental challenge in IRS-aided wireless networks. Particularly, as the number of IRS reflecting elements and/or that of IRS-served users increase, the channel training overhead becomes excessively high. To tackle this challenge, we propose in this paper a new anchor-assisted two-phase channel estimation scheme, where two anchor nodes, namely A1 and A2, are deployed near the IRS for helping the base station (BS) to acquire the cascaded BS-IRS-user channels. Specifically, in the first phase, the partial channel state information (CSI), i.e., the element-wise channel gain square, of the BS-IRS link is obtained by estimating the BS-IRS-A1/A2 channels and the A1-IRS-A2 channel, separately. Then, in the second phase, by leveraging such partial knowledge of the BS-IRS channel that is common to all users, the individual cascaded BS-IRS-user channels are efficiently estimated. Simulation results demonstrate that the proposed anchor-assisted channel estimation scheme is able to achieve comparable mean-squared error (MSE) performance as compared to the conventional scheme, but with significantly reduced channel training time.

cs.IT↗

arXiv2020

Accurate Closed-Form Approximations to Channel Distributions of RIS-Aided Wireless Systems

This paper proposes highly accurate closed-form approximations to channel distributions of two different reconfigurable intelligent surface (RIS)-based wireless system setups, namely, dual-hop RIS-aided (RIS-DH) scheme and RIS-aided transmit (RIS-T) scheme. Differently from previous works, the proposed approximations reveal to be very tight for arbitrary number $N$ of reflecting metasurface's elements. Our findings are then applied to the performance analysis of the considered systems, in which the outage probability, bit error rate, and average channel capacity are derived. Results show that the achievable diversity orders $G_d$ for RIS-DH and RIS-T schemes are $N-1<G_d<N$ and $N$, respectively. Furthermore, it is revealed that both schemes can not provide the multiplexing gain and only diversity gains are achieved. For the RIS-DH scheme, the channels are similar to the keyhole multiple-input multiple-output (MIMO) channels with only one degree of freedom, while the RIS-T scheme is like the transmit diversity structure.

cs.IT↗

arXiv2020

Intelligent Reflecting Surface Aided Wireless Communications: A Tutorial

Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be efficiently integrated into wireless networks, such as reflection optimization, channel estimation, and deployment from communication design perspectives. In this paper, we provide a tutorial overview of IRS-aided wireless communication to address the above issues, and elaborate its reflection and channel models, hardware architecture and practical constraints, as well as various appealing applications in wireless networks. Moreover, we highlight important directions worthy of further investigation in future work.

cs.IT↗

arXiv2020

3D UAV Trajectory and Communication Design for Simultaneous Uplink and Downlink Transmission

In this paper, we investigate the unmanned aerial vehicle (UAV)-aided simultaneous uplink and downlink transmission networks, where one UAV acting as a disseminator is connected to multiple access points, and the other UAV acting as a base station (BS) collects data from numerous sensor nodes. The goal of this paper is to maximize the sum of the UAV-BS and UAV-AP system throughput by jointly optimizing the 3D UAV trajectory, communication scheduling, and UAV-AP/SN transmit power. We first consider a special case where the UAV-BS and UAV-AP trajectories are pre-determined. Although the resulting problem is an integer and non-convex optimization problem, a globally optimal solution is obtained by applying the polyblock outer approximation (POA) method based on the problem's hidden monotonic structure. Subsequently, for the general case considering the 3D UAV trajectory optimization, an efficient iterative algorithm is proposed to alternately optimize the divided sub-problem based on the successive convex approximation (SCA) technique. Numerical results demonstrate that the proposed design is able to achieve significant system throughput gain over the benchmarks. In addition, the SCA-based method can achieve nearly the same performance as the POA based method with much lower computational complexity.

cs.IT↗

arXiv2020

Pilot Decontamination for Massive MIMO Network with UAVs

This letter studies the pilot contamination (PC) problem for massive multiple-input multiple-output (MIMO) networks with coexisting terrestrial users and unmanned aerial vehicles (UAVs). Due to the strong line-of-sight (LoS) air-to-ground channels between UAVs and base stations (BSs), UAVs usually cause a more severe PC issue as compared to the traditional terrestrial users. To mitigate the PC caused by UAVs, we propose a low-complexity distributed scheme by exploiting the full-dimensional beamforming of massive MIMO BSs and the angle-dependent LoS channels between them and high-altitude UAVs. Numerical results show the effectiveness of the proposed pilot decontamination scheme and the significant signal-to-interference-plus-noise ratio (SINR) gains in both the uplink and downlink after pilot decontamination.

cs.IT↗

arXiv2020

White Paper on Broadband Connectivity in 6G

This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface Assisted Anti-Jamming Communications: A Fast Reinforcement Learning Approach

Malicious jamming launched by smart jammers can attack legitimate transmissions, which has been regarded as one of the critical security challenges in wireless communications. With this focus, this paper considers the use of an intelligent reflecting surface (IRS) to enhance anti-jamming communication performance and mitigate jamming interference by adjusting the surface reflecting elements at the IRS. Aiming to enhance the communication performance against a smart jammer, an optimization problem for jointly optimizing power allocation at the base station (BS), and reflecting beamforming at the IRS is formulated while considering quality of service (QoS) requirements of legitimate users. As the jamming model and jamming behavior are dynamic and unknown, a fuzzy win or learn fast-policy hill-climbing (WoLFPHC) learning approach is proposed to jointly optimize the anti-jamming power allocation and reflecting beamforming strategy, where WoLFPHC is capable of quickly achieving the optimal policy without the knowledge of the jamming model, and fuzzy state aggregation can represent the uncertain environment states as aggregate states. Simulation results demonstrate that the proposed anti-jamming learning-based approach can efficiently improve both the IRS-assisted system rate and transmission protection level compared with existing solutions.

eess.SP↗