Searcharxiv⌕ Search

arXiv subjects

R. A. Buhrman

Publications and source records attributed to R. A. Buhrman.

68 records · Page 4Linked to original sources

Time-Resolved Spin Torque Switching and Enhanced Damping in Py/Cu/Py Spin-Valve Nanopillars

We report time-resolved measurements of current-induced reversal of a free magnetic layer in Py/Cu/Py elliptical nanopillars at temperatures T = 4.2 K to 160 K. Comparison of the data to Landau-Lifshitz-Gilbert macrospin simulations of the free layer switching yields numerical values for the spin torque and the Gilbert damping parameters as functions of T. The damping is strongly T-dependent, which we attribute to the antiferromagnetic pinning behavior of a thin permalloy oxide layer around the perimeter of the free layer. This adventitious antiferromagnetic pinning layer can have a major impact on spin torque phenomena.

cond-mat.mes-hall↗

Spin torque, tunnel-current spin polarization and magnetoresistance in MgO magnetic tunnel junctions

We examine the spin torque (ST) response of magnetic tunnel junctions (MTJs) with ultra-thin MgO tunnel barrier layers to investigate the relationship between the spin-transfer torque and the tunnel magnetoresistance (TMR) under finite bias. We find that the spin torque per unit current exerted on the free layer decreases by less than 10% over a bias range where the TMR decreases by over 40%. We examine the implications of this result for various spin-polarized tunneling models and find that it is consistent with magnetic-state-dependent effective tunnel decay lengths.

cond-mat.mes-hall↗

Spin-Transfer Excitations of Permalloy Nanopillars for Large Applied Currents

Using measurements of the spectra of microwave-frequency resistance oscillations, we determine the phase diagram of magnetic excitations caused by torques from DC spin-polarized currents in (thin permalloy)/copper/(thick permalloy) multilayer samples. We extend the measurements to larger values of current than have been reported previously. We find several additional modes that we are able to identify with motion of the thick magnetic layer as well as the thin one. Peaks in the microwave spectra at multiple frequencies suggest that spatially non-uniform dynamical states can be important in some circumstances. We compare the experimental phase diagram with simple theoretical models and achieve a good qualitative agreement.

cond-mat.mtrl-sci↗

Tunneling spectroscopy studies of aluminum oxide tunnel barrier layers

We report scanning tunneling microscopy and ballistic electron emission microscopy studies of the electronic states of the uncovered and chemisorbed-oxygen covered surface of AlOx tunnel barrier layers. These states change when chemisorbed oxygen ions are moved into the oxide by either flood gun electron bombardment or by thermal annealing. The former, if sufficiently energetic, results in locally well defined conduction band onsets at ~1 V, while the latter results in a progressively higher local conduction band onset, exceeding 2.3 V for 500 and 600 C thermal anneals.

cond-mat.mtrl-sci↗

Adjustable spin torque in magnetic tunnel junctions with two fixed layers

We have fabricated nanoscale magnetic tunnel junctions (MTJs) with an additional fixed magnetic layer added above the magnetic free layer of a standard MTJ structure. This acts as a second source of spin-polarized electrons that, depending on the relative alignment of the two fixed layers, either augments or diminishes the net spin-torque exerted on the free layer. The compound structure allows a quantitative comparison of spin-torque from tunneling electrons and from electrons passing through metallic spacer layers, as well as analysis of Joule selfheating effects. This has significance for current-switched magnetic random access memory (MRAM), where spin torque is exploited, and for magnetic sensing, where spin torque is detrimental.

cond-mat.mtrl-sci↗

Oxygen stoichiometry and instability in aluminium oxide tunnel barrier layers

We present X-ray photoelectron spectroscopy data which show that the chemisorbed oxygen previously observed to be on the surface of thin AlOx layers formed by room temperature thermal oxidation is bound by oxygen vacancies in the oxide. Increasing the electric field across the oxide, either by over-coating with a metallic electrode, or by electron bombardment, drives this surface chemisorbed oxygen into the vacancy sites. Due to the low bonding energies of these oxygen sites, subsequent oxygen exposures draw these ions back to the surface, reforming chemisorbed O$_2^-$. Al/AlOx/Al tunnel junctions incorporating electron bombarded AlOx barriers show a significant reduction in the low frequency junction resistance noise level at 4.2 K.

cond-mat.mtrl-sci↗

Spin-Transfer Effects in Nanoscale Magnetic Tunnel Junctions

We report measurements of magnetic switching and steady-state magnetic precession driven by spin-polarized currents in nanoscale magnetic tunnel junctions with low-resistance, < 5 Ohm-micron-squared, barriers. The current densities required for magnetic switching are similar to values for all-metallic spin-valve devices. In the tunnel junctions, spin-transfer-driven switching can occur at voltages that are high enough to quench the tunnel magnetoresistance, demonstrating that the current remains spin-polarized at these voltages.

cond-mat.mtrl-sci↗

Temperature dependence of spin-transfer-induced switching of nanomagnets

We measure the temperature, magnetic-field, and current dependence for the switching of nanomagnets by a spin-polarized current. Depending on current bias, switching can occur between either two static magnetic states or a static state and a current-driven precessional mode. In both cases, the switching is thermally activated and governed by the sample temperature, not a higher effective magnetic temperature. The activation barriers for switching between static states depend linearly on current, with a weaker dependence for dynamic to static switching.

cond-mat.mtrl-sci↗

Current-Induced Nanomagnet Dynamics for Magnetic Fields Perpendicular to the Sample Plane

We present electrical measurements of high-frequency magnetic dynamics excited by spin-polarized currents in Co/Cu/Ni80Fe20 nanopillar devices, with a magnetic field applied perpendicular to the sample layers. As a function of current and magnetic field, the dynamical phase diagram contains several distinguishable precessional modes and also static magnetic states. Using detailed comparisons with numerical simulations, we provide rigorous tests of the theory of spin-transfer torques.

cond-mat.mtrl-sci↗

Reduction of spin transfer by synthetic antiferromagnets

Synthetic antiferromagnetic layers (SAF) are incorporated into spin transfer nanopillars giving a layer composition [Co(bottom)/Ru/Co(fixed)]/Cu/Co(free), where square brackets indicate the SAF. The Co(bottom) and Co(fixed) layers are aligned antiparallel (AP) by strong indirect exchange coupling through the Ru spacer. All three magnetic layers are patterned, so this AP alignment reduces undesirable dipole fields on the Co(free) layer. Adding the Co(bottom)/Ru layers reduces the spin polarization of the electron current passing through the nanopillar, leading to a decreased spin-torque per unit current incident on the Co(free) layer. This may be advantageous for device applications requiring a reduction of the effects of a spin-torque, such as nanoscale CPP-GMR read heads.

cond-mat.stat-mech↗

Microwave Oscillations of a Nanomagnet Driven by a Spin-Polarized Current

We describe direct electrical measurements of microwave-frequency dynamics in individual nanomagnets that are driven by spin transfer from a DC spin-polarized current. We map out the dynamical stability diagram as a function of current and magnetic field, and we show that spin transfer can produce several different types of magnetic excitations, including small-angle precession, a more complicated large-angle motion, and a high-current state that generates little microwave signal. The large-angle mode can produce a significant emission of microwave energy, as large as 40 times the Johnson-noise background.

cond-mat.mtrl-sci↗

Thermally-Activated Magnetic Reversal Induced by a Spin-Polarized Current

We have measured the statistical properties of magnetic reversal in nanomagnets driven by a spin-polarized current. Like reversal induced by a magnetic field, spin-transfer-driven reversal near room temperature exhibits the properties of thermally-activated escape over an effective barrier. However, the spin-transfer effect produces qualitatively different behaviors than an applied magnetic field. We discuss an effective current vs. field phase diagram. If the current and field are tuned so that their effects oppose one another, the magnet can be driven superparamagnetic.

cond-mat.mes-hall↗

Current-driven Magnetization Reversal and Spin Wave Excitations in Co/Cu/Co Pillars

Using thin film pillars ~100 nm in diameter, containing two ferromagnetic Co layers of different thicknesses separated by a paramagnetic Cu spacer, we examine effects of torques due to spin-polarized currents flowing perpendicular to the layers. In accordance with spin-transfer theory, spin-polarized electrons flowing from the thin to the thick Co layer can switch the magnetic moments of the layers antiparallel, while a reversed electron flow causes switching to a parallel state. When large magnetic fields are applied, the current no longer fully reverses the magnetic moment, but instead stimulates spin-wave excitations.

cond-mat.mes-hall↗

The 2-Channel Kondo Model I: Review of Experimental Evidence for its Realization in Metal Nanoconstrictions

Certain zero-bias anomalies (ZBAs) in the voltage, temperature and magnetic field dependence of the conductance $G(V,T,H)$ of quenched Cu point contacts have previously been interpreted to be due to non-magnetic 2-channel Kondo (2CK) scattering from near-degenerate atomic two-level tunneling systems (Ralph and Buhrman, 1992; Ralph et al. 1994), and hence to represent an experimental realization of the non-Fermi-liquid physics of the T=0 fixed point of the 2-channel Kondo model. In this, the first in a series of three papers (I,II,III) devoted to 2-channel Kondo physics, we present a comprehensive review of the quenched Cu ZBA experiments and their 2CK interpretation, including new results on ZBAs in constrictions made from Ti or from metallic glasses. We first review the evidence that the ZBAs are due to electron scattering from stuctural defects that are not static, but possess internal dynamics. In order to distinguish between several mechanisms proposed to explain the experiments, we then analyze the scaling properties of the conductance at low temperature and voltage and extract from the data a universal scaling function $Γ(v)$. The theoretical calculation of the corresponding scaling function within the 2CK model is the subject of papers II and III. The main conclusion of our work is that the properties of the ZBAs, and most notably their scaling behavior, are in good agreement with the 2CK model and clearly different from several other proposed mechanisms.

cond-mat↗